English dropdown-ico

Manual Origin Storage DL3 external hard drive

34 pages Not applicable
Download

Go to site of 34

Summary
  • Origin Storage DL3 external hard drive - page 1

    1 U SER M ANUAL DL3 --------- --------------- July 2014 ---- --------- ----------- ...

  • Origin Storage DL3 external hard drive - page 2

    2 Contents At a Glance Troubleshoot 3 Introduct ion 26 Forgotten password 5 About t he DL3 27 Initialize & for mat your dr ive Getting Started Miscellaneous 6 First time set up 32 Linux conf iguration 9 Admin pass word 34 Frequently asked questions 11 User pass word 34 Contact support team 13 Main screen 14 Disconnect ing your DL3 Basics 15 Adm ...

  • Origin Storage DL3 external hard drive - page 3

    3 At a Glance INTRODUCTION Congratulations on your purchase of t he DataLocker DL3™ En crypted Hard Drive. This user manual is intended to help you configure your device . Because we are const antly updating our products, the images and text in t his manual may vary slightly from the images and text displayed by your DataLocker DL3™. These chan ...

  • Origin Storage DL3 external hard drive - page 4

    4 Alth ough the DataLocker DL3™ is ext remely user friendly, it is recommended that you review this guide to ensure that you become fully acquainted with the DataLocker DL3™ and all of its features. To register your product, please visit our website and fill out the on line form under the Support tab to complete the product registration. ...

  • Origin Storage DL3 external hard drive - page 5

    5 ABOUT THE DL3 The DataLocker DL3™ has a m inimum power requirem ent of 5 Vol ts and 1A of current that is drawn from the USB port. The DataLo cker DL3™ utilizes 256 -bit AES encryption operating in XTS mode to fu ll y encrypt your drive’s contents. The DataLocker DL3™ comes preformatted with Windows N TF S file system. All major fil e sys ...

  • Origin Storage DL3 external hard drive - page 6

    6 Getting Started FIRST TIME SETUP This sec tion will guide you through the necess ary s t eps to se t up the DL3 drive f or the first time around. I t is highly recommended that you set a new administrator password using alphanumeric charact ers. Step 1: Connect the DL3 to your computer with t he included USB cable. Step 2: At the startup screen p ...

  • Origin Storage DL3 external hard drive - page 7

    7 Step 6: Press the [CONTINUE] button, an d t hen en ter in the current password, which is 000000 . Pl ease follow the onscreen instruct ions to set your new password. It is recommended that you use a com bination of both al pha and numeric characters for your password. Step 7: After the new password has been se t. You may s et o ther options or go ...

  • Origin Storage DL3 external hard drive - page 8

    8 After you press the [CONNECT] button on the DL3 drive, it will begin connecting to the com puter. By default, Windows will show an AutoPlay dialog once the drive has successfully connected. In Windows Explorer you wi ll now see a new drive call ed “Data Locker” listed in the Hard Disk Drives section. A new drive letter will be automatically a ...

  • Origin Storage DL3 external hard drive - page 9

    9 ADMIN PASSWORD The process of cha nging t he Adm inistrator password is identical to the se tup process. I t is highl y recomm ended that you set a new administrator passw ord using alphanumeric characters. Step 1: Power o n your D L3 by pl ugging it in to your computer. I f the drive is already connected, press the [DISCONNECT] button and then p ...

  • Origin Storage DL3 external hard drive - page 10

    10 Step 5: Press t he [CONTINUE] button an d t hen en ter in the current password, which is 000000 . Please follow the onscreen ins tructions t o se t your new password. I t is recommended that yo u use a combination o f both alpha and numeric characters for your password. Step 6: After the ne w password has been se t. You may set other options, or ...

  • Origin Storage DL3 external hard drive - page 11

    11 USER PASSWORD The DL3 supports the creation of a user password. The user w ill have access to all data on the drive; however, the user w ill not be able to access c ertain administrative options and controls. Note: You must change the default adm inistrator password before creating a user password. Step 1: Power o n your D L3 by pl ugging it in ...

  • Origin Storage DL3 external hard drive - page 12

    12 Step 5: Press t he [CREATE] butt on. A user with t he default password of 000000 is now created. Step 6: The user sh ould t hen re-l ogin with t he defaul t us er password of 000000 and change t he defaul t password to a personal password. The user password change process is identical to changi ng the a dministrator’s password. The u ser’s s ...

  • Origin Storage DL3 external hard drive - page 13

    13 MAIN SCREEN The connected status screen on your DL3 drive displays usefu l information. Indicates that the DL3 drive has a USER PASSWORD enabled. Indicates that the DL3 drive’s USER PASSWORD is disabled. Displays the current firmware installed on the DL3 drive. Disconnects the DL3 drive from the computer. To prevent data loss or damage to disk ...

  • Origin Storage DL3 external hard drive - page 14

    14 DISCONNECTING YOUR DL3 One way to preve nt loss or corrupted data is to properl y eject the DL3 drive. I t is best practice to use your operating system’s Safely Remove Hardware or Eject function befor e you power dow n or de ta ch the D ataLocker DL3™ fr om the host system. This will also hel p prevent damage to the disk. W I NDOWS USERS MA ...

  • Origin Storage DL3 external hard drive - page 15

    15 Basics ADMINISTRATOR CONT ROLS Previous Menu / Save Settings Button Used to g o back to previo us menu and save t he current settings. Change Password Used to set the administrator password. User Password Used to create a user password. System Enter the System Menu (see next page). Self Destruct If enabled, the Self Destruct functio n can deter ...

  • Origin Storage DL3 external hard drive - page 16

    16 SYSTEM MENU Previous Menu / Save Settings Button Used to g o back to previo us menu and save t he current settings. Next Menu Button Used to go to the next screen. Language Set the menu language. Supported languages are:  English  French  German  Spanish Virtual The DL3 supports the creation of an UNENCRYPTED Read Only par tition, w ...

  • Origin Storage DL3 external hard drive - page 17

    17 are prohibited. 3. Repeating passwords suc h as "11111111", "99999999", "AAAAAAAA", "BBBBBBBB" are prohibited. 4. The password must conta in both numeric and alpha characters. LCD Contrast Adjust the LCD screen’s contrast. Previous Menu Button Used to g o back to previo us menu and save the current setti ...

  • Origin Storage DL3 external hard drive - page 18

    18 USER OPTIONS Previous Menu / Save Settings Button Used to g o back to previo us menu and save t he current settings. Change Password Used to set the administrator password. Language Set the menu language. Supported languages are:  English  French  German  Spanish Key Tone Turn the keypad tone ON or OFF. LCD Contrast Adjust the LCD sc ...

  • Origin Storage DL3 external hard drive - page 19

    19 SELF-DESTRUCT MODE The Self Des t ruct feature is designed to defend against brute force password hacks. The DL3 performs this by zeroizing all of the device ’ s encryption keys once the appointed number of failed login attempts is reached. Once the encrypt ion key is delet ed, your data is no longer recoverable. Powering off the uni t does NO ...

  • Origin Storage DL3 external hard drive - page 20

    20 4. After m any unsuccessful attempt s you w ill see the “Self Destruct Will Begin” warning. I f the next attempt fails, the Sel f Destruct func tio n will destroy all data o n the DL3 drive. This process is instantaneous and all data will be wiped. 5. The DL3 drive will emit a steady alert tone and will not s top until you unp lug t he USB c ...

  • Origin Storage DL3 external hard drive - page 21

    21 Advanced RFID AUTHENTICATION The DL 3 features an optional RFID module for a 2 nd l ayer of authentication. A maximum of 3 RFID tags can be regis tered on each DL3 d rive. RFID models of the DL3 come with 2 RFI D tags. I f you would l ike to pair your own tag, the DL3 RFID module supports ISO 14443A and ISO 15693 with a frequency of 13.56 MHz. S ...

  • Origin Storage DL3 external hard drive - page 22

    22 Step 4: At the se tup menu press the [SYSTEM] button. Step 5: Press t he button to displ ay the [SYSTEM 2/2] screen. Step 6: At t he next menu screen, press the [RFID] button. Step 7: At the se tup R FID sc reen, press [ADD RFID TAG] button. Step 8: P lace the supp lied RFID tag near the bott om right hand corner of the DL3 until you hear a “b ...

  • Origin Storage DL3 external hard drive - page 23

    23 Step 9: After reg istering, the RFI D tag val ue w ill be displayed. Pl ease make note of the RFID tag I D incase the tag is lost or damaged. You have now successfull y registered a RFID tag and the RFID function is enabled. The next time yo u reconnec t the DL3 drive, you are required to use the R FID tag to authenticate before en tering the pa ...

  • Origin Storage DL3 external hard drive - page 24

    24 VIRTUAL CD PARTITION The DL3 drive supports a feature call ed “Virtual CDs” or VCD. This allows the DL3 drive to em ulate a physical CD-ROM d rive using ISO images. A VCD is a drive partition, w hich is recognized b y your operating system as a physical Read Only drive with i ts own unique drive letter. A VCD is “Read O nly” and can only ...

  • Origin Storage DL3 external hard drive - page 25

    25 2 Select ISO Click the Select ISO bu tton to sel ect the ISO image you would l ike to upload to the DL3 drive. 3 Update Then cl ick the Update bu tton to upl oad the ISO image to the DL3 drive. This will finalize the steps to mo unt an I SO image on the DL3. I f successful, Windows will display Drive Autoplay dial og window. 4 Format You should ...

  • Origin Storage DL3 external hard drive - page 26

    26 Troubleshoot FORGOTTEN PASSWORD Passwords are stored at the device l evel only, meaning t hat t here is NO way to retrieve a l ost or forgotten password. This is to ensure that access to the DL3 is restricted to the owner of the device. DataLocker does not s tore any passwords or carry a master p assword for it would compromise the securi ty of ...

  • Origin Storage DL3 external hard drive - page 27

    27 INITIALIZING AND FORMATTIN G YOUR DL3 On occasion – for exam ple, after sel f-destructing your DL3 - you will need to initialize and reformat t he drive to make it usable again. How to Initialize your Drive 1 Touch start screen. 2. Press Yes . 3. Press Yes . 4. Press Continue . 5. Press Yes . 6. Hit screen 16 times. Default password will be 00 ...

  • Origin Storage DL3 external hard drive - page 28

    28 You wi ll now hav e t o form at y our d rive. The ins tructions t o f ormat yo ur drive will vary depending on your OS. W indo ws 1 Right click My Computer and press Manage 2 Then press Disk Management 3 Right click the unformatted disk and select New Simple Volume 4 Press Next 5 Press Next 6 Pick a letter, and then click Next ...

  • Origin Storage DL3 external hard drive - page 29

    29 7 Rename the volume label, and t hen press Next 8 Review, and then press Finish 9 The status of your formatted disk should be Healthy (Primary Partition) 10 Your DL3 should now appear under My Computer ...

  • Origin Storage DL3 external hard drive - page 30

    30 Mac 1 Go to Applications under your Finder. 2 Go to Utilities and then open Disk Utility . 3 Select your unformatted DL3 disk. 4 Rename your disk label. ...

  • Origin Storage DL3 external hard drive - page 31

    31 5 Press Erase . 6 Your formatted DL3 should now appear under Devices . Click on the links for a video walkthrough on formatting your DL3. Format your DL3 - Windows Format your DL3 - Mac ...

  • Origin Storage DL3 external hard drive - page 32

    32 Miscellaneous LINUX COMPATIBILITY AND CONFIGURATION The DL3 is platform independent, capable of being run with 100% compatibility on most systems. For optimal Linux or Unix based system compat ibility, we recommend using at least the Linux 2.6.31 Kernel (released 9 September 2009), which implemented the xHC I specification for USB3.0. Al though ...

  • Origin Storage DL3 external hard drive - page 33

    33 Finally you'll use the mkfs command to format the disk for Linux. Here, we use ext4. # mkfs.ext4 /dev/sdb1 If you want to rename the drive, use the e2label command. # e2label /dev/sdb1 /DataLocker ...

  • Origin Storage DL3 external hard drive - page 34

    34 FREQUENTLY ASKED QUESTIONS If you still have questions after reviewing t he user guide, please consult our FAQ page at the DataLocker website. http://support.datalocker. com/ Contact the Support Team If you have any unresolved issues with the DL3, give us a call or go to our website to chat with a real DataLocker representative. Phone: (913) 310 ...

Manufacturer Origin Storage Category External Hard Drive

Documents that we receive from a manufacturer of a Origin Storage DL3 external hard drive can be divided into several groups. They are, among others:
- Origin Storage technical drawings
- DL3 external hard drive manuals
- Origin Storage product data sheets
- information booklets
- or energy labels Origin Storage DL3 external hard drive
All of them are important, but the most important information from the point of view of use of the device are in the user manual Origin Storage DL3 external hard drive.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Origin Storage DL3 external hard drive, service manual, brief instructions and user manuals Origin Storage DL3 external hard drive. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Origin Storage DL3 external hard drive.

Similar manuals

A complete manual for the device Origin Storage DL3 external hard drive, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Origin Storage DL3 external hard drive by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Origin Storage DL3 external hard drive.

A complete Origin Storage manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Origin Storage DL3 external hard drive - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Origin Storage DL3 external hard drive, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Origin Storage DL3 external hard drive, that we can find in the current document
3. Tips how to use the basic functions of the device Origin Storage DL3 external hard drive - which should help us in our first steps of using Origin Storage DL3 external hard drive
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Origin Storage DL3 external hard drive
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Origin Storage DL3 external hard drive in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Origin Storage DL3 external hard drive?

Use the form below

If you did not solve your problem by using a manual Origin Storage DL3 external hard drive, ask a question using the form below. If a user had a similar problem with Origin Storage DL3 external hard drive it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)