English dropdown-ico

Manual Panasonic PV-DV202

120 pages 9.68 mb
Download

Go to site of 120

Summary
  • Panasonic PV-DV202 - page 1

    3 OPERA TION GUIDE Before attempting to connect, operate or adjust this product, please read these instructions thoroughly. Spanish Quick Use Guide is included. Guía para rápida consulta en español está incluida. LSQT0563A Models No. PV -D V202 PV -D V402 Digital Video Camcorder Operating Instructions Mini R [ PV -D V402 shown ] For assistance, ...

  • Panasonic PV-DV202 - page 2

    2 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Things Y ou Should Kno w Date of Purchase Dealer Purchased From Dealer Address Dealer Phone No. Model No. Serial No. Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Use ...

  • Panasonic PV-DV202 - page 3

    3 Bef ore Use 11. Grounding or Polarization — This video unit may be equipped with either a polarized 2-wire AC (Alternating Current) line plug (a plug having one blade wider than the other) or 3-wire grounding type plug, a plug having a third (grounding) pin. The 2-wire polarized plug will fit into the power outlet only one way. This is a safety ...

  • Panasonic PV-DV202 - page 4

    4 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com 15. Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna syst ...

  • Panasonic PV-DV202 - page 5

    5 Bef ore Use Things Y ou Should Know ................................................................................................ 2 Important Safeguards ..................................................................................................... 3 Precautions ............................................................................ ...

  • Panasonic PV-DV202 - page 6

    6 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Bef ore Using This Operating Instructions book is designed for use with models PV -DV202 and PV -DV402 . The PV -DV402 is the model used f or illustrative purposes. Features ma y v ar y , so please read carefully . Differences between models Mode ...

  • Panasonic PV-DV202 - page 7

    7 Bef ore Use record tab Before Using AY-DVM30EA AY-DVM60EA Cassette type 60 minutes 45 minutes SP LP 90 minutes 30 minutes Record Speed/ Playback time AY-DVM80EA 80 minutes 120 minutes Use only those tapes having the Mini logo indicating the 6.35 mm digital standard. Record Speed/Playback Time Cassettes have a sliding record tab to ensure recordin ...

  • Panasonic PV-DV202 - page 8

    8 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com 1 2 3 OR 1 Loosen the strap from the Buckle and create a loop. 2 Pull the strap firmly through the Buckle to shorten or lengthen the strap. 1 Adjust the Length Adjust the length of the Hand Strap to the size of your hand as illustrated. Attaching ...

  • Panasonic PV-DV202 - page 9

    9 Bef ore Use Bef ore Using To operate Camera functions: Set POWER to CAMERA. To operate VCR functions: Set POWER to VCR. You can operate the major functions of your Palmcorder from up to approximately 5 m (16 feet) away (indoors). Aim the IR Remote Control toward the front of the Palmcorder and press the desired buttons (Remote Sensor is located u ...

  • Panasonic PV-DV202 - page 10

    10 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com B Replace battery with Panasonic PART NO. VSBW0004 (CR2025) only. Use of another battery may present a risk of fire or explosion. Caution: battery may explode if mistreated. Dispose of used battery properly. Keep away from children. Do not recha ...

  • Panasonic PV-DV202 - page 11

    11 Bef ore Use Quic k Guide Insert the Battery Pack Insert Cassette 1 Insert the Battery Pack and slide it up until it locks with a click. 1 Press LCD-OPEN to unlock the LCD monitor, and swing it fully open. 3 Slide TAPE EJECT to open the Cassette Compartment Cover. Protection Film Note • Remove the Protection Film before use. Before you begin ? ...

  • Panasonic PV-DV202 - page 12

    12 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Camera Recording When the LCD monitor is fully open, the Viewfinder automatically turns OFF . 180 ° 90 ° LCD Monitor 2 Adjust the Vision Adjustment Control to your eyesight. 4 Press REC/PAUSE to start recording. Press REC/PAUSE again to pause ...

  • Panasonic PV-DV202 - page 13

    13 Bef ore Use Insert Memory Card* 3 Insert the Memory Card and hold in place until you hear a click. 4 Close the M-CARD Door. 2 Slide DOOR OPEN to open M-CARD door. 1 Set POWER to OFF. Quic k Guide Before you begin • Charge the Battery. (p. 14) *Memory Card: MultiMediaCard or SD Memor y Card (p. 94) • Be sure to insert the Memor y Card before ...

  • Panasonic PV-DV202 - page 14

    14 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com 1 Supplying P ower Charge the Battery Pack on the AC Adaptor 1 Connect and plug in the Power Cord as shown. • POWER Lamp will light. • Remove the DC Cable, if attached, from the adaptor. 2 Attach the Battery as shown to charge. • CHARGE La ...

  • Panasonic PV-DV202 - page 15

    15 Bef ore Use 1 Slide the Battery downward while sliding BATT RELEASE to remove the Battery Pack . (p. 14) 2 Insert the DC Cable into the DC IN Terminal. 3 Connect the other end of the DC Cable to the AC Adaptor as shown. 4 Plug in the AC Adaptor. • The POWER Lamp on the AC Adaptor lights up. • When not in use, unplug the AC Adaptor from the A ...

  • Panasonic PV-DV202 - page 16

    16 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com . Setting the Cloc k 1 Press MENU to display the Camera or VCR mode menu screen. (p. 17) 2 Rotate JOG KEY to select DISPLAY SETTING , and then press JOG KEY to display the DISPLAY SETTING menu screen. 3 Rotate JOG KEY to select CLOCK- SET , and ...

  • Panasonic PV-DV202 - page 17

    17 Bef ore Use A Press JOG KEY to set your selection. B Rotate JOG KEY to select a menu item. C Press JOG KEY to set your selection. • The “ ● ” mark indicates selection. D Press MENU twice to exit the menu. The Palmcorder features three menu displays: one for CAMERA mode (recording), one for M-CARD (Memory Card Photo Mode) and one for VCR ...

  • Panasonic PV-DV202 - page 18

    18 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Camera Recor ding Remove the lens cap and clip it to the hand strap. 1 Set POWER to CAMERA. • The POWER Lamp lights red. • Be sure POWER is fully turned to the CAMERA position. 2 With the Viewfinder Eye Cup held up against your eye, adjust t ...

  • Panasonic PV-DV202 - page 19

    19 Camera The LCD (Liquid Crystal Display) monitor can be used while recording. 1 Press LCD-OPEN to unlock the LCD monitor. 2 Swing the LCD monitor fully open and adjust the viewing angle. • The LCD monitor will automatically turn on. • When the LCD monitor is completely closed, it will shut off automatically to save power. • Adjust the LCD B ...

  • Panasonic PV-DV202 - page 20

    20 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Camera Recor ding 1 Set POWER to CAMERA. 2 Press MENU to display the CAMERA mode menu screen. 3 Rotate JOG KEY to select D.FUNCTION , and press JOG KEY to display the CAMERA FUNCTION menu screen. 4 Rotate JOG KEY to select PROGRESSIVE , and pres ...

  • Panasonic PV-DV202 - page 21

    21 Camera Zoom You can gradually zoom in for close ups or zoom out for wide angle shots. • The zooming speed ranges from a slow 17 seconds to a fast 1.5 seconds according to the amount of pressure applied to the POWER ZOOM. 1 Set POWER to CAMERA. 2 Zoom slowly : by lightly pressing the “ T ” (Telephoto) or the “ W ” (Wide Angle) side of t ...

  • Panasonic PV-DV202 - page 22

    22 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Self Recording 180 ° Camera Recor ding 1 Press RECORDING CHECK briefly in the REC/PAUSE mode. The [CHK] indication appears. After checking, the Palmcorder returns to the REC/PAUSE mode. • For Recording Check, the Palmcorder must be in the sam ...

  • Panasonic PV-DV202 - page 23

    23 Camera CINEMA Mode 1 Set POWER to CAMERA. 2 Press MENU to display the CAMERA mode menu screen. 3 Rotate JOG KEY to select ADJUST , then press JOG KEY to display the CAMERA ADJUST menu screen. 4 Rotate JOG KEY to select CINEMA , and then press JOG KEY to select ON. • A black strip will appear at the top and bottom of the picture. • Press MENU ...

  • Panasonic PV-DV202 - page 24

    24 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Special Effect Features SPORTS mode • The recorded images will not be so blurred when they are viewed later using slow or still picture playback. • When playing back a sports mode recording, the movement may appear slightly jerky. • Do not ...

  • Panasonic PV-DV202 - page 25

    25 Camera Special Effect Features MagicVu allows you to record video in total darkness. You can select the color of image: B/W, green, or blue. (Menu OSD: p. 109) MagicVu ™ IR Filter (0 Lux) (PV-DV402 only) 2 MAGICVU/ 0LUX 1 Set POWER to CAMERA. 2 Slide MAGICVU/0LUX to ON. • A black and white image appears. •“ MAGICVU ” will appear on the ...

  • Panasonic PV-DV202 - page 26

    26 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Special Effect Features 3, 4 JOG KEY 1 POWER Picture in Picture (PinP) You can display a PinP (still image) screen on the Main Picture. • PinP position is fixed at the bottom right of the screen. Note 1 Set POWER to CAMERA. 2 Press MENU to dis ...

  • Panasonic PV-DV202 - page 27

    27 Camera Special Effect Features 1 Set POWER to CAMERA. 2 Press MENU to display the CAMERA menu screen. Then rotate and press JOG KEY to select PHOTO TITLE . 3 Rotate and press JOG KEY to select and set MODE and then TITLE . 1st : Select and set MODE (WIPE or MIX). 2nd : Select and set TITLE to “ SET ” . •“ PLEASE WAIT ” appears on-scree ...

  • Panasonic PV-DV202 - page 28

    28 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Adv anced Settings 1 Set POWER to CAMERA. 2 Hold down AUTO/MANUAL for more than 0.7 seconds so that the “ MNL ” indication appears in the EVF or the LCD monitor. 3 Press JOG KEY repeatedly until “ AWB ” appears in the EVF or LCD monitor. ...

  • Panasonic PV-DV202 - page 29

    29 Camera Ad v anced Settings Use Manual Focus (MF) when recording ... • a subject through glass. • a scene where the subject is far from the Palmcorder and there are objects in the foreground. • a subject with distinct horizontal stripes. • a subject not centered in the Viewfinder. • subjects with shiny surfaces. • an obliquely angled ...

  • Panasonic PV-DV202 - page 30

    30 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Adv anced Settings High Speed Shutter Auto Shutter Manual Selection 3, 4 JOG KEY To record high speed motion (e.g. tennis stroke) with improved STILL or SLOW MOTION playback when watching the tape on this Palmcorder. In the AUTO mode (no indicat ...

  • Panasonic PV-DV202 - page 31

    31 Camera Adv anced Settings Adjusting the Iris Manually Normally, the Palmcorder adjusts the exposure automatically. However, when the background is extremely bright, or when the subject is backlit, you can compensate by adjusting the Iris manually. 1 Set POWER to CAMERA. 2 Hold down AUTO/MANUAL for more than 0.7 seconds so that the “ MNL ” in ...

  • Panasonic PV-DV202 - page 32

    32 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Playbac k Y our Recordings 1 Set the POWER to VCR. • The POWER lamp lights red. • Be sure POWER is fully turned to the VCR position. 2 Press LCD-OPEN to unlock the LCD monitor and swing open. 3 Press (REWIND/SEARCH) to rewind the tape. 4 Pre ...

  • Panasonic PV-DV202 - page 33

    33 VCR R 1 Press PLAY for more than 5 seconds in STOP mode. • The Palmcorder will go into Repeat Playback mode when the tape reaches its end. • The letter “ R ” will appear in the EVF and LCD monitor. 2 Turn the Palmcorder OFF to exit the Repeat Playback mode. 1 PLAY EVF/LCD Pla ybac k Y our Recor dings Built-in Speaker 1, 2 VOLUME 1 Set PO ...

  • Panasonic PV-DV202 - page 34

    34 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Special Effect Features B PLAY A, B FAST FORWARD/ SEARCH A, B REWIND/ SEARCH • Sound is muted during all special effects. A During playback, hold down (FAST FORWARD/SEARCH) or (REWIND/SEARCH). The search will continue for as long as the button ...

  • Panasonic PV-DV202 - page 35

    35 VCR Special Effect Feature Note 1 Forward Slow: Press SLOW/F.ADV during play. Reverse Slow: Press SLOW/F.ADV during play. 2 Press PLAY to release. (During reverse slow motion playback, time code indication may not change regularly.) • Palmcorder will automatically STOP when in slow motion for more than 10 minutes. • During slow motion playba ...

  • Panasonic PV-DV202 - page 36

    36 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Frame by Frame Advance (Remote Control Only) Note 1 Press PAUSE during playback. 2 Press SLOW/F.ADV to do a frame by frame advance. Press SLOW/F.ADV to do a frame by frame reverse. 3 Press PLAY to release. • If you hold down SLOW/F.ADV, you ca ...

  • Panasonic PV-DV202 - page 37

    37 VCR B INDEX SEARCH (rewind) Top Scan If you hold down INDEX SEARCH more than 2 seconds, the Palmcorder will scan for scenes (or PhotoShots) and playback the first few seconds of each. To cancel this function, press PLAY or STOP. B INDEX SEARCH (fast forward) A Place the Palmcorder in the VCR STOP mode. B Press INDEX SEARCH fast forward or rewind ...

  • Panasonic PV-DV202 - page 38

    38 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Strobe Multi Mode 1 Set POWER to VCR. 2 Press MENU to display the menu screen. 3 Rotate and press JOG KEY to select and set MULTI SETTING . 4 Press JOG KEY repeatedly to set desired speed. • Press MENU twice to exit. 5 Press (PLAY) to start pl ...

  • Panasonic PV-DV202 - page 39

    39 VCR Back of TV Audio In S-Video In Back of TV Audio In Video In Special Effect Features To S-Video In To Audio In S-VIDEO OUT AV Cable (Supplied) S-Video Cable (Not supplied) To Video In To Audio In A/V OUT For best Chrominance and Luminance, use the S-Video connection if available on your TV. A/V Cable (Supplied) [ TV with S-VIDEO IN Jacks ] 1 ...

  • Panasonic PV-DV202 - page 40

    40 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com CAMERA mode Zoom Out ( “ W ” ) Zoom In ( “ T ” ) 5 POWER ZOOM D.ZOOM • The normal optical zoom functions from 1X to 10X. • As magnification increases, resolution significantly decreases. • Because the image is enlarged digitally, t ...

  • Panasonic PV-DV202 - page 41

    41 Digital Features Digital Features VCR mode 1 Set POWER to VCR. 2 Press MENU to display the VCR MENU screen. 3 Rotate JOG KEY to select PLAY FUNCTION , then press JOG KEY to display the VCR PLAY FUNCTION menu screen. 4 Rotate JOG KEY to select D.ZOOM , then press JOG KEY to select ON. • Press MENU twice to exit. 5 Press (PLAY) to start playback ...

  • Panasonic PV-DV202 - page 42

    42 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Digital Features EIS ON NORMAL 1 Set POWER to CAMERA. 2 Press EIS to stabilize the picture. • Picture flicker may be observed when taping under fluorescent lighting conditions. • The EIS indicator flashes when the light level is inadequate. ...

  • Panasonic PV-DV202 - page 43

    43 Digital Features Digital Features 1 Set POWER to CAMERA or VCR. 2 Press MENU to display the menu screen. 3 Rotate JOG KEY to select D.FUNCTION in the CAMERA mode menu screen or PLAY FUNCTION in the VCR mode menu screen, then press JOG KEY to display the CAMERA FUNCTION or VCR PLAY FUNCTION menu screen. 4 Rotate JOG KEY to select D.FUNCTION , and ...

  • Panasonic PV-DV202 - page 44

    44 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Editing Features External Microphone with M3 connector (not supplied) External Microphone Jack (PV-DV402 only) The original sound can be replaced with new sound using the built-in Palmcorder microphone or an external microphone (PV-DV402 only). ...

  • Panasonic PV-DV202 - page 45

    45 Editing Features Editing Features 4 Press (PAUSE) to start Audio Dubbing. • Connect the Palmcorder to the TV in order to monitor the sound. (p. 39) Only NTSC (National Television Standards Committee) recorded tapes can be audio dubbed. The following screen appears if the tape was not recorded in NTSC format. 5 Press (PAUSE) to stop Audio Dubbi ...

  • Panasonic PV-DV202 - page 46

    46 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Editing Features Video In S-Video In VHF Connecting Cable (not supplied) TV (To View) A/V Cable (Supplied) To Audio In To Video In Recording: VCR (Rear) To S-Video In (If there is S-Video In) • For technical reasons, dubbing a tape may reduce ...

  • Panasonic PV-DV202 - page 47

    47 Editing Features Editing Features 3, 4 PLAY 3, 4, 5 PAUSE 3, 4 PLAY 6 STOP 4 REC High quality digital-to-digital copying can be accomplished if both Palmcorders incorporate the DV Input/Output (i.LINK) Connector (DV interface cable (i.LINK) is not supplied). 1 Insert a pre-recorded tape into the source (playing) Palmcorder, and set POWER to VCR. ...

  • Panasonic PV-DV202 - page 48

    48 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Car d Features You can record still images to a Memory Card. 1 Slide the M-CARD Lock Switch to unlock, then set POWER to M-CARD. • The POWER lamp lights red. • Be sure POWER is fully turned to M-CARD position. •“ PLAY: PUSH PLAY KEY” i ...

  • Panasonic PV-DV202 - page 49

    49 Car d Features 1 Repeat steps 1 and 2 on page 48. 2 Set POWER to VCR. 3 Press (PLAY) to start playback of the cassette tape. And then, press (PAUSE) to select an image. 4 Press PHOTOSHOT to record the desired image to the Memory Card. • When PHOTOSHOT is pressed in PLAY or SLOW mode, the screen goes to STOP mode. • To playback the images of ...

  • Panasonic PV-DV202 - page 50

    50 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com 1 Slide the M-CARD Lock Switch to unlock, then set POWER to M-CARD. •“ PLAY: PUSH PLAY KEY” is displayed for 10 seconds. 2 Press (M-PLAY) to display the Multi playback screen. •“ PLEASE WAIT ” appears on-screen. • Rotate JOG KEY to ...

  • Panasonic PV-DV202 - page 51

    51 Car d Features Car d Features 3 M-DEL M-STOP You can delete unwanted images and increase the remaining image memory. Warning: Once deleted, images cannot be restored. DELETE PAGE Delete specific images from a page. DELETE ALL Delete all images. (p. 52) FORMAT Delete all data. (p. 53) 2 M-PLAY • While deleting image, DO NOT turn off the Palmcor ...

  • Panasonic PV-DV202 - page 52

    52 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Car d Features 1 Do steps 1 and 2 on page 51. 2 Press (M-DEL) to display the DELETE menu. Then, rotate and press JOG KEY to select ALL . • The screen below is displayed. • To cancel delete, press (M-STOP) or rotate and press JOG KEY to selec ...

  • Panasonic PV-DV202 - page 53

    53 Car d Features Car d Features 1 Do steps 1 and 2 on page 51. 2 Press (M-DEL) to display the DELETE menu, then rotate and press JOG KEY to select FORMAT . • The screen below is displayed. • To cancel format, press (M-STOP) or rotate and press JOG KEY to select NO. 3 Rotate and press JOG KEY to select YES . •“ PLEASE WAIT ” is displayed ...

  • Panasonic PV-DV202 - page 54

    54 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Car d Features DPOF Setting You can select the images to be printed, the number of prints, and other print-related information (DPOF setting) on a Memory Card. “ DPOF ” stands for Digital Print Order Format, and since printing data can be ad ...

  • Panasonic PV-DV202 - page 55

    55 PC Connection You can transfer images from your Palmcorder tape to your PC (Personal Computer). T ransferring Y our Images (Windo ws) • IBM PC/AT or compatible • Pentium ll Processor: 266 MHz or more • RAM: 64 MB or more • CD-ROM drive (for installation) • Mouse or other pointing device • Windows 95 (for ArcSoft Software only)/98SE/ ...

  • Panasonic PV-DV202 - page 56

    56 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Caution Software Installation (Windows 95 (for ArcSoft Software only/ 98SE/Me/2000/XP) • Please install Palmcorder USB Device Driver first before connecting the Palmcorder and your PC using USB Cable. Once Palmcorder USB Device Driver is insta ...

  • Panasonic PV-DV202 - page 57

    57 PC Connection Notes on PHOTOVU/MPEG4 Movie Messenger ™ System operation • For PHOTOVU/MPEG4 Movie Messenger ™ System, do not connect the i.LINK and USB terminals to the Palmcorder at the same time. • Make sure Palmcorder power is not shut off during use as your PC system may become unstable. Therefore, the AC Adaptor should be used as th ...

  • Panasonic PV-DV202 - page 58

    58 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com PHO T O VU/MPEG4 Mo vie Messeng er™ System 3 2 USB Terminal USB Terminal 1 Turn on your PC. 2 Set the Palmcorder POWER to VCR. 3 Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied). •“ CAPTURE ” appears in the EVF ...

  • Panasonic PV-DV202 - page 59

    59 PC Connection PHO T O VU/MPEG4 Mo vie Messeng er™ System For Windows 2000 users 3 Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied). •“ CAPTURE ” appears in the EVF or the LCD monitor. • The “ Found New Hardware ” screen of Windows is displayed. • When the Palmcorder and PC (with Windows 2000) are connect ...

  • Panasonic PV-DV202 - page 60

    60 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Running the PHOTOVU/ MPGE4 Movie Messenger ™ System* Before you begin • Insert a recorded tape. (p. 11) * PHOTOVU : You can transfer Still images from your Palmcorder tape to a PC. MPEG4 Movie Messenger ™ System : You can transfer Motion i ...

  • Panasonic PV-DV202 - page 61

    61 PC Connection PHO T O VU/MPEG4 Mo vie Messeng er™ System Using Tape Image Data (USB) Before you begin • Insert a recorded tape. (p. 11) • Make Palmcorder-PC connections. (pp. 58, 59) • Turn your PC on. (p. 58) • Set Palmcorder POWER to VCR. 1 Repeat steps 1~4 on page 60 to run the PHOTOVU/MPEG4 Movie Messenger™ System. • When the U ...

  • Panasonic PV-DV202 - page 62

    62 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Playing back the saved Motion and Still images You can play back the saved Motion images and Still images (p. 61) for confirmation. 1 Repeat steps 1~4 on page 60 to run the PHOTOVU/MPEG4 Movie Messenger™ System. 2 Click [VideoGift] to display ...

  • Panasonic PV-DV202 - page 63

    63 PC Connection Settings You can open the “Compression Settings” screen. (p. 68) E-mail You can attach the compressed image to your e-mail. Uploader You can upload edited moving images and still images to the PictureStage home page. Exit Exits VideoGift screen. Still Mode You can display still images. Slider When se ve ral still images are ope ...

  • Panasonic PV-DV202 - page 64

    64 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com PHO T O VU/MPEG4 Mo vie Messeng er™ System Using the VideoGift Screen 4 Click on [All] or [Picture] to display a Still image list on the View Manager screen. 5 Click on [Still Mode] on the VideoGift screen. 6 Select the Still image from the Vi ...

  • Panasonic PV-DV202 - page 65

    65 PC Connection The e-mail Software must support MAPI (Messaging Application Programming Interface). Below are some e-mail Software programs which support MAPI: Microsoft Outlook, Microsoft Outlook Express, Netscape Messenger: • Outlook(R) Express 5x, Outlook97, Outlook98, Outlook2000 • Outlook Express 4x • Other MAPI applications [Netscape( ...

  • Panasonic PV-DV202 - page 66

    66 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Attaching Motion images to e-mail 3 Repeat steps 4 ~ 6 on page 64 to select a Motion Image. • If sending a portion of a Motion image, see “ Sending a Portion of a Motion Image ” on page 67. • To compress a Motion image, see “ Setting t ...

  • Panasonic PV-DV202 - page 67

    67 PC Connection PHO T O VU/MPEG4 Mo vie Messeng er™ System Sending a Portion of a Motion Image 1 Repeat steps 1~4 on page 60 to run the PHOTOVU/MPEG4 Movie Messenger™ System. 2 Click [VideoGift] to display the VideoGift screen. • The image captured last is displayed in the VideoGift screen. • If warning indication is displayed, please see ...

  • Panasonic PV-DV202 - page 68

    68 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Image Size You can select the image size (352 x 288 or 176 x 144). Quality You can select the image quality (High, Normal, Low). 1 2 Setting the Size and Quality of Motion and Still Image 4 Settings 1 Repeat steps 1~4 on page 60 to run the PHOTO ...

  • Panasonic PV-DV202 - page 69

    69 PC Connection PHO T O VU/MPEG4 Mo vie Messeng er™ System Selecting a Frame from a Motion Image 1 Repeat steps 1~4 on page 60 to run the PHOTOVU/MPEG4 Movie Messenger™ System. 2 Click [VideoGift] to display the VideoGift screen. • The image captured last is displayed in the VideoGift screen. • If warning indication is displayed, please se ...

  • Panasonic PV-DV202 - page 70

    70 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com PHO T O VU/MPEG4 Mo vie Messenger™ System Uploading the image to PictureStage Home Page* Before you begin • Attain internet access. • Before using this feature, you must become a registered member of PictureStage. For details on installati ...

  • Panasonic PV-DV202 - page 71

    71 PC Connection 5 Click [Upload To Photo Album] to upload the Still Image or [Upload To Video Album] to upload the Motion Image. • The “ PictureStage Video (Image) Uploader ” screen is displayed. • Click [Exit] to exit uploader. 6 Enter your login ID and password, and then click [Continue]. • Click [Free Sign up] if you have no login ID. ...

  • Panasonic PV-DV202 - page 72

    72 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com T ransf erring Y our Ima ges (i.LINK) (Windows) DV Interface Cable (i.LINK) (6-to-4 pin) (not supplied) PC Connector DV Input/Output (i.LINK) Connector PC Connection with DV Interface Cable (i.LINK) For more detailed information regarding editin ...

  • Panasonic PV-DV202 - page 73

    73 PC Connection Using Tape Image Data Before you begin • Insert a recorded Tape. (p. 11) • Make Palmcorder-PC connections. (p. 72) • Turn your PC on. • Set Palmcorder POWER to VCR. • Run the Software after the DV Interface Cable (i.LINK) has been connected to the Palmcorder. 1 Repeat steps 1~4 on page 60 to run the PHOTOVU/MPEG4 Movie Me ...

  • Panasonic PV-DV202 - page 74

    74 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com 3 Click on [Detail] . 4 Click on [Movie Capture] at the point you wish to capture a Motion image. • The screen to select the start frame is displayed. 5 Select the start frame for the segment to be captured select one frame, and click [Select] ...

  • Panasonic PV-DV202 - page 75

    75 PC Connection P almcor der USB Device Driver/SD Drive 3 2 USB Terminal USB Terminal 1 Turn on your PC. 2 Set the Palmcorder POWER to M-CARD. 3 Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied). •“ CONNECT WITH PC ” appears in the EVF or the LCD monitor. • The “ Found New Hardware Wizard ” screen of Windows is ...

  • Panasonic PV-DV202 - page 76

    76 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com For Windows 2000 users 3 Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied). •“ CONNECT WITH PC ” appears in the EVF or the LCD monitor. • The “ Found New Hardware ” screen of Windows is displayed. • When th ...

  • Panasonic PV-DV202 - page 77

    77 PC Connection P almcor der USB Device Driver/SD Drive Using Memory Card Image Data Before you begin • Install the Palmcorder USB Device Driver. (p. 56) • Set POWER to OFF before inserting a recorded Memory Card. (pp. 48, 49) • Make Palmcorder-PC connections. (pp. 75, 76) • Turn your PC on. (p. 75) By connecting the Palmcorder and PC with ...

  • Panasonic PV-DV202 - page 78

    78 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com P almcorder File Con ver ter Using Palmcorder File Converter You can convert the JPEG data of your PC into DCF (Design rule for Camera File System) data, and transfer this data to your Palmcorder via USB. 1 Set Palmcorder POWER to M-CARD. 2 Conn ...

  • Panasonic PV-DV202 - page 79

    79 PC Connection P almcorder File Con ver ter 6 Select the folder to which the converted file is to be saved. • The Conversion results screen is displayed. 7 Use “ Help ” for detailed instructions. When selecting “ To convert format for Panasonic Digital Palmcorder ” 5 Select the file to be converted. 6 Select the drive to which the conve ...

  • Panasonic PV-DV202 - page 80

    80 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com W eb Camera Please read this first Conditions for Use • Y ou ha ve direct dial-up connection capability to the internet. Also , you and the other person(s) are in the same Netw ork (LAN). • Microsoft MSN Messenger Service 4.5 or newer/Window ...

  • Panasonic PV-DV202 - page 81

    81 PC Connection W eb Camera Connection (for Web Camera) 1 A/V Cable (supplied) Audio Adaptor (supplied) To MIC Terminal USB Terminal USB Cable (supplied) AV OUT USB Terminal 1 Turn on your PC. 2 Set the Palmcorder POWER to CAMERA. 3 Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied). •“ Found New Hardware Wizard” is d ...

  • Panasonic PV-DV202 - page 82

    82 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com W eb Camera 3 Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied). •“ Found New Hardware ” is displayed. •“ CONNECT WITH PC ” and “ WEB CAM ” are displayed in the EVF and LCD monitor. A gray box is also dis ...

  • Panasonic PV-DV202 - page 83

    83 PC Connection W eb Camera (For Windo ws XP users) For Windows Messenger (Windows XP only) When Windows Messenger is ne wly installed or when run the first time, the f ollowing settings become necessary . F or more details, please read the respective Help file. Note • Once settings are performed, they are not required from the second time the s ...

  • Panasonic PV-DV202 - page 84

    84 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com W eb Camera (For Windows XP user s) There are times when a V ersion Upgrade screen will be display ed. Howe ve r , if you are using Windows Messenger 4.5 or newe r, there is no need to upgra de. 5 Type in your E-mail address and password. • Yo ...

  • Panasonic PV-DV202 - page 85

    85 PC Connection W eb Camera (For Windows XP user s) 8 The person calling (inviting) side Double-click a person to call from those currently [on-line]. •“ xxxx-conversation” screen is displayed. 9 The person calling (inviting) side Click [Start Camera] in the “xxx- conversation” screen. • A message inviting the other person is displayed ...

  • Panasonic PV-DV202 - page 86

    86 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com W eb Camera (For Windo ws 98SE/Me/2000 users) For MSN Messenger Service and Windows NetMeeting (Windows 98SE/Me/2000) When MSN Messenger Service is newly installed or when run the first time, the follo wing settings become necessary . For more d ...

  • Panasonic PV-DV202 - page 87

    87 PC Connection W eb Camera (For Windo ws 98SE/Me/2000 users) Note 6 Click on [Audio Tuning Wizard] in the [Tools] menu. • You can set the volume for playback or mic volume, etc. • Also, confirm that the Palmcorder and PC are connected correctly. The person you wish to access needs to do settings 1 ~ 6 also . 7 Select [Tools] -> [Add a Cont ...

  • Panasonic PV-DV202 - page 88

    88 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com 9 The person calling (inviting) side Click [Start NetMeeting] in the “ xxx- conversation” screen. The invited person side The Instant Message screen appears and a confirmation message is displayed. Click on [Accept]. The NetMeeting screen is ...

  • Panasonic PV-DV202 - page 89

    89 PC Connection W arning Indications Windows 2000 In Windows 2000, startup PHO TO VU/ MPEG4 Movie Messenger™ System. Clicking on [VideoGift] ma y cause the f ollowing type of error to occur . If so, please perf or m the f ollowing instructions . Download and install Media Pla yer (7.1 or new er), go to http://www .microsoft.com/windows/ mediapla ...

  • Panasonic PV-DV202 - page 90

    90 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com T ransferring Y our Ima g es (Macintosh) You can transfer images from your Palmcorder tape to your Macintosh. • Mac OS 9.0~9.1 • Mac OS 8.6~9.1 (for ArcSoft Software) • iMac, iBook or Power Macintosh ® G3 with USB port or Power Mac ™ G4 ...

  • Panasonic PV-DV202 - page 91

    91 PC Connection T ransferring Y our Ima g es (Macintosh) ArcSoft applications Installation 1 Turn on the Macintosh. 2 Insert the supplied Software CD-ROM into the CD-ROM Drive. 3 Double click the “Panasonic” icon. Double click the “ ArcSoft ” Folder. 4 Double click the “ Panorama Maker Installer, ” “ PhotoBase Installer, ” “ Phot ...

  • Panasonic PV-DV202 - page 92

    92 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com P almcorder Accessory System Accessory # PV-DAC11A CGR-D08A/1B CGR-D16A/1B CGP-D28A/1B CGR-D53A/1K PV-DDC9 PV-DRC9 PV-H150 RP-SD064BPPA RP-SD032BPPA RP-SD016BPPA BN-SDCAPE/1B BN-SDABPE/1B Description AC Adaptor with AC Cable and DC Cable 800mAH ...

  • Panasonic PV-DV202 - page 93

    93 For Y our Inf ormation P almcorder Accessory Order Form TO OBTAIN ANY OF OUR PALMCORDER ACCESSORIES YOU CAN DO ANY OF THE FOLLOWING: VISIT YOUR LOCAL PANASONIC DEALER OR CALL PANASONIC’S ACCESSORY ORDER LINE AT 1-800-332-5368 [6 AM-5 PM M-F, 6 AM-10:30 AM SAT, PACIFIC TIME] OR MAIL THIS ORDER TO: PANASONIC SERVICES COMPANY ACCESSORY ORDER OFFI ...

  • Panasonic PV-DV202 - page 94

    94 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com 1 Insert a rigid wire, such as an extended paper clip into point (A) and lift cover up. 2 Using Tweezers or needle-nose pliers, carefully remove bulb. • Take unit to servicenter if you need assistance. This product has a fluorescent lamp that ...

  • Panasonic PV-DV202 - page 95

    95 For Y our Inf ormation Notes On Operations Approximate Brightness Values Your Palmcorder has been designed for normal scene illumination of 150 footcandles (1500 lx). However, the Palmcorder may be used at F1:1.8, if illumination is more than 0.5 footcandles (5 lx). The table below shows the color temperature for reference. COLOR TINT MIXTURE PA ...

  • Panasonic PV-DV202 - page 96

    96 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Specifications Power Source: Palmcorder: 7.2 V DC (Battery) 7.8 V DC (AC Adaptor) AC Adaptor: 110/120/220/240 V AC, 50/60 Hz Battery: Lithium-Ion Type DC 7.2 V Power Consumption: Palmcorder : 7.2 V/7.8 V DC 6.5 W (Max. 9.5 W) AC Adaptor : 18 W 1 ...

  • Panasonic PV-DV202 - page 97

    97 For Y our Inf ormation Bef ore Requesting Service (a) Video Head Cleaning: Normally, your Palmcorder will not require head cleaning. However, it is possible that the heads may become clogged due to dust in the air, playing damaged tapes, long term use, etc. If “NEED HEAD CLEANING ” appears for 5 seconds in the EVF or LCD monitor, the heads m ...

  • Panasonic PV-DV202 - page 98

    98 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com If you have a problem with your Palmcorder, it may be something you can correct yourself. Check the list below for symptoms and corrections. No picture in the EVF or LCD Monitor... Video cassette cannot be inserted... Video cassette cannot be re ...

  • Panasonic PV-DV202 - page 99

    99 For Y our Inf ormation The following warning displays appear in the EVF and the LCD monitor. Indications If the Palmcorder is in CAMERA mode without a cassette inserted, “ ” will flash and “ TAPE NOT INSERTED ” will appear for 5 seconds. Recording will not start. If the Palmcorder is in CAMERA mode or Audio dub mode with the cassette sli ...

  • Panasonic PV-DV202 - page 100

    100 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Indications Condition If you play a tape recorded in a format other than NTSC or you try to copy copy-protected data, “ INCOMPATIBLE DATA ” will appear. When a still image is transferred from a tape to an already full Memory Card, or when s ...

  • Panasonic PV-DV202 - page 101

    101 For Y our Inf ormation Mail this completed form and your Proof of Purchase along with your unit to: Panasonic Services Company 1705 N. Randall Road Elgin, IL. 60123-7847 Attn: Camcorder Repair Request f or Service Notice: Please photocopy this form when making a request for service notice. In the unlikely event this product needs service. • P ...

  • Panasonic PV-DV202 - page 102

    102 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Limited W arranty Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America, One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. AVE. 65 ...

  • Panasonic PV-DV202 - page 103

    103 For Y our Inf ormation Servicenter List For Product Information, Operating Assistance, Literature Request, Dealer Locations, and all Customer Service inquiries please contact: 1-800-211-PANA (7262), Monday-Friday 9 am-9 pm; Saturday-Sunday 9 am-7 pm, EST. or send e-mail to : consumerproducts@panasonic.com Service in Puerto Rico Matsushita Elect ...

  • Panasonic PV-DV202 - page 104

    104 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Spanish Quick Use Guide/Guía P ara Uso Rápido Este símbolo tiene por finalidad alertar al usuario acerca de la presencia de tensi ón sin aislación en el interior del producto, que puede tener la intensidad suficiente como para causar desca ...

  • Panasonic PV-DV202 - page 105

    105 For Y our Inf ormation Spanish Quick Use Guide/Guía P ara Uso Rápido Inserte de la bater ía Antes de comenzar • Cargue la batter í a. (P á gina 14.) Insert Cassette 1 Coloque la bater ía y desl í cela hacia arriba hasta que se quede bloqueada con un clic. 1 Presione LCD-OPEN y abra completamente el monitor LCD. 3 Deslice el interruptor ...

  • Panasonic PV-DV202 - page 106

    106 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Para ver la reproducci ó n en el LCD (pantalla de visualización de cristal líquido) Cuando el monitor LCD se enchuentra totalmente abier to , el visor se DESACTIV A autom á ticamente. Antes de comenzar • Cargue la batter í a. (P à gina ...

  • Panasonic PV-DV202 - page 107

    107 For Y our Inf ormation Introducir la Tarjeta de memoria* Antes de comenzar • Cargue la batter í a. (P à gina 14.) *T arjeta de Memori a: T arjeta MultiMedia o T arjeta de Memor ia SD (Pàgina 94.) • Aseg ú rese de introducir la T arjeta de memor ia antes de utilizar la tarjeta PhotoShot. (Pá gina 48.) A continuaci ó n se indican una li ...

  • Panasonic PV-DV202 - page 108

    108 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com PROG. AE (p. 24) To select one of the 5 Program AE modes. Setting to OFF cancels the previously selected Program AE mode. CINEMA (p. 23) When set to ON, you can record a picture compatible with a wide-screen TV equipped with an S2 picture termi ...

  • Panasonic PV-DV202 - page 109

    109 For Y our Inf ormation REMOTE (p. 10) ly VCR1: To receive signals from the Remote Control, set to VCR1. VCR2: To receive signals from the Remote Control, set to VCR2. OFF: To prevent reception of signals from the Remote Control. BEEP Set to ON to hear beep when starting and stopping camera recording or when unusual conditions occur. To cancel t ...

  • Panasonic PV-DV202 - page 110

    110 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com 10 REC-SPEED (p. 7) SP: Normal recording speed mode. LP: Recording time is 1.5 times as long as in the SP mode. For example, 120 minutes of recording is possible on an 80 minute tape. AUDIO-DUB (p. 44) Set to AUDIO-DUB “ ON ” in the Menu OS ...

  • Panasonic PV-DV202 - page 111

    111 For Y our Inf ormation DISPLAY (p. 113) To select the desired type of display and counter indication displayed on the LCD Monitor or in the viewfinder. C.RESET (p. 113) Setting to ON resets the counter to zero. DATE/TIME (p. 112) The date and time can be set and displayed on the screen. CLOCK-SET (p. 16) When set to ON, the date and time can be ...

  • Panasonic PV-DV202 - page 112

    112 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Here are some of the basic indications which will appear on the Palmcorder EVF and LCD Monitor. Only Date and Time indications will be recorded onto the tape. Battery Remaining Tape Remaining • It will take several seconds for the tape remain ...

  • Panasonic PV-DV202 - page 113

    113 For Y our Inf ormation Electr onic Vie wfinder/LCD Monitor Indications k CAMERA/VCR Mode l m WARNING Indication (pp. 99, 100) The warning displays appear in the EVF and the LCD monitor. Display ON/OFF and Counter/Time Code The indication switches as shown below when the desired “DISPLAY” mode is selected from the menu. (Menu OSD: pp. 109, 1 ...

  • Panasonic PV-DV202 - page 114

    114 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Electr onic Vie wfinder/LCD Monitor Indications CAMERA/VCR Mode Zoom Magnification Level (p. 40) Digital EIS Indications (p. 42) This display appears when EIS is pressed. Backlight Indication (p. 23) This display appears when BA CK LIGHT is pre ...

  • Panasonic PV-DV202 - page 115

    115 For Y our Inf ormation Electr onic Viewfinder/LCD Monitor Indications Image Page Remaining Indication (p. 48) • Image pages left in selected mode. “ 000 ” flashes when memory is full. • Memory capacity provided all pictures are taken in the same mode: “NORMAL” mode Approx. 70 images (Supplied 8 MB Memory Card) “FINE” mode Approx ...

  • Panasonic PV-DV202 - page 116

    116 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com JOG KEY pp. 16, 17. M.FOCUS DIAL p. 29. Lens Front View MAGICVU/0LUX (PV-DV402 only) p. 25. POWER (VCR • OFF • CAMERA•M-CARD) pp. 11, 12, 13. LCD (Liquid Crystal Display) Monitor pp. 11, 12, 19, 32. LCD-OPEN pp. 11, 12, 19, 32. Built-in S ...

  • Panasonic PV-DV202 - page 117

    117 For Y our Inf ormation Inde x of Controls POWER ZOOM pp. 21, 40. VOLUME p. 33. Electronic Viewfinder (EVF) p. 12. Rear View PHOTOSHOT pp. 20, 48, 49. Lens Cap p. 8. Top View LIGHT p. 9. FADE p. 25. REC p. 47. REW pp. 12, 32. RECORDING CHECK p. 22. STOP pp. 12, 32. M-STOP pp. 50~53. PLAY pp. 12, 32. M-PLAY pp. 50, 51. MULTI p. 38. FF p. 34. BACK ...

  • Panasonic PV-DV202 - page 118

    118 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com CAUTION: VCR DC Output Connector p. 15. CHARGE Lamp p. 14. POWER Lamp pp. 14, 15. AC Power Cord pp. 14, 15. This unit will operate on 110/120/ 220/240 V AC. An AC plug adaptor may be required for voltages other than 120V AC. Please contact eith ...

  • Panasonic PV-DV202 - page 119

    119 For Y our Inf ormation Index A AC Adaptor ... 6, 14, 15, 92 Accessories (Optional) . 92 Accessories (Supplied) ... 6 A/V Cab le ........... 6, 39, 81 Audio Adaptor ........... 6, 81 Audio Dub bing ........ 44, 45 Audio/Video F ade In/Out ...................................... 25 B Backlight ....................... 23 Battery P a ck . 6, 11, 14, ...

  • Panasonic PV-DV202 - page 120

    Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company ( “ PSC ” ), Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infanteria, Km. 9.5 San Gabriel Industrial Park Carolina, Puerto Rico 00985 Printed in Japan LSQT0563A S0 ...

Manufacturer Panasonic Category Camcorder

Documents that we receive from a manufacturer of a Panasonic PV-DV202 can be divided into several groups. They are, among others:
- Panasonic technical drawings
- PV-DV202 manuals
- Panasonic product data sheets
- information booklets
- or energy labels Panasonic PV-DV202
All of them are important, but the most important information from the point of view of use of the device are in the user manual Panasonic PV-DV202.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Panasonic PV-DV202, service manual, brief instructions and user manuals Panasonic PV-DV202. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Panasonic PV-DV202.

Similar manuals

A complete manual for the device Panasonic PV-DV202, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Panasonic PV-DV202 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Panasonic PV-DV202.

A complete Panasonic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Panasonic PV-DV202 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Panasonic PV-DV202, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Panasonic PV-DV202, that we can find in the current document
3. Tips how to use the basic functions of the device Panasonic PV-DV202 - which should help us in our first steps of using Panasonic PV-DV202
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Panasonic PV-DV202
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Panasonic PV-DV202 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Panasonic PV-DV202?

Use the form below

If you did not solve your problem by using a manual Panasonic PV-DV202, ask a question using the form below. If a user had a similar problem with Panasonic PV-DV202 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)