English dropdown-ico

Manual Global Machinery Company RBS10

11 pages 0.25 mb
Download

Go to site of 11

Summary
  • Global Machinery Company RBS10 - page 1

    RBS10 MAN RBS10 10/01 INSTRUCTION MANU AL 245mm Band Sa w • Melbourne • Perth • Auckland • Hong K ong • Shanghai • T aipei • New Y ork • V erona • London • P aris ...

  • Global Machinery Company RBS10 - page 2

    Contents W arr anty 2 Introduction 3 Specifications 3 Safety instructions 3 Additional safety rules f or saws 5 Unpacking 6 Assembly 6 Know y our product 7 Setting up 8 Operation 10 Maintenance 10 Full 2 Y ears Home Use W arr anty Whilst every effort is made to ensure your complete satisfaction with this tool, occasionally , due to the mass manufac ...

  • Global Machinery Company RBS10 - page 3

    Specifications Nominal voltage: 230 – 240 V ac~ 50 Hz Wattage: 370W Band speed: 700m/min Dimensions: 860 mm x 420 mm x 530 mm Working table: 340 mm x 335 mm (adjustable between 0 - 45º) T able height from floor: 370 mm Width of throat: 245 mm Max.cutting height: 100 mm Saw blade length: 1,712 mm Saw blade width: 10 mm (3 to 12.7mm) Gross weight: ...

  • Global Machinery Company RBS10 - page 4

    2. Consider the environment in which you are working. Do not use power tools in damp or wet locations. K eep the work area well lit. Do not expose power tools to rain and high humidity. Do not use power tools in the presence of flammable liquids or gases . 3. Keep visitors away from the work area. All visitors and onlookers , especially children an ...

  • Global Machinery Company RBS10 - page 5

    replaced by an authorised service facility. Do not use a tool if the switch does not turn the tool on and off correctly. 20. Guard against electric shock. Prevent body contact with grounded objects such as water pipes, radiators , ranges and refrigerator enclosures. 21. Use only approved parts. When servicing, use only identical replacement parts. ...

  • Global Machinery Company RBS10 - page 6

    Unpacking Due to modern mass production techniques, it is unlik ely that your GMC Power T ool is f aulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury. Assembly The Band Saw is shipped partly ...

  • Global Machinery Company RBS10 - page 7

    Know y our product 1. Saw blade 2. Upper wheel housing 3. Saw band tensioning knob 4. Lower wheel housing 5. Saw band tensioning knob 6. Motor shaft (not shown) 7. Drive belt (not shown) 8. ON button 9. OFF button 10. T able insert 11. Rip fence 12. Rip fence scale 13. Rip fence guide 14. Rip fence guide handle 15. T able trunnion 16. T able trunni ...

  • Global Machinery Company RBS10 - page 8

    Setting up Centring the table 1. Loosen the screws holding the table trunnion bracket 2. Move the table until the saw blade is positioned in the centre of the table insert 3. Tighten the bracket screws ensuring that the table does not move . Setting the table squar e with the saw blade 1. Loosen the table tilt-securing knob . 2. Adjust the he x hea ...

  • Global Machinery Company RBS10 - page 9

    Changing the saw band W arning. Ensure that the mains plug is removed from the power socket The saw is supplied with a general-purpose woodcutting blade . 1. T o change the blade , first remove the rip fence scale . 2. Slacken the blade tension by rotating anti-clockwise the blade tensioning knob on the top of the upper wheel housing. 3. Open the d ...

  • Global Machinery Company RBS10 - page 10

    Operation Switching on and o ff 1. Connect the plug to the power supply. 2. Depress the ON button. 3. T o switch off, depress the OFF button. NOTE. 1. The saw must be connected to an earthed outlet and should be operated on a residual current device (RCD) of 30 mA capacity. 2. Extension leads must have a minimum lead cross section of 3 x 0.75 mm (2 ...

  • Global Machinery Company RBS10 - page 11

    Carefully read the entire Instruction Manual before using this product. Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia) or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: • GMC Product Type • GMC Product Code A GMC Service Engineer wil ...

Manufacturer Global Machinery Company Category Saw

Documents that we receive from a manufacturer of a Global Machinery Company RBS10 can be divided into several groups. They are, among others:
- Global Machinery Company technical drawings
- RBS10 manuals
- Global Machinery Company product data sheets
- information booklets
- or energy labels Global Machinery Company RBS10
All of them are important, but the most important information from the point of view of use of the device are in the user manual Global Machinery Company RBS10.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Global Machinery Company RBS10, service manual, brief instructions and user manuals Global Machinery Company RBS10. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Global Machinery Company RBS10.

Similar manuals

A complete manual for the device Global Machinery Company RBS10, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Global Machinery Company RBS10 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Global Machinery Company RBS10.

A complete Global Machinery Company manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Global Machinery Company RBS10 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Global Machinery Company RBS10, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Global Machinery Company RBS10, that we can find in the current document
3. Tips how to use the basic functions of the device Global Machinery Company RBS10 - which should help us in our first steps of using Global Machinery Company RBS10
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Global Machinery Company RBS10
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Global Machinery Company RBS10 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Global Machinery Company RBS10?

Use the form below

If you did not solve your problem by using a manual Global Machinery Company RBS10, ask a question using the form below. If a user had a similar problem with Global Machinery Company RBS10 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)