English dropdown-ico

Manual Network Technologies CS-16/8

79 pages 1.81 mb
Download

Go to site of 79

Summary
  • Network Technologies CS-16/8 - page 1

    MAN102 Rev Date 8/19/2008 a SERIMUX-TERM-CS-16/8 Terminal Converter with Console Switch Installation and Operation Manual SERIMUX ® Series ...

  • Network Technologies CS-16/8 - page 2

    i TRADEMARK SERIMUX is a registered trademark of Network Techno logi es Inc in the U.S. and other countries. COPYRIGHT Copyright © 2003 , 2008 by Network Techno logies Inc. All rights reserved. No part of this publication may be reproduc ed, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocop ...

  • Network Technologies CS-16/8 - page 3

    ii TABLE OF CONTENTS INTRODUCTION ................................................................................................................... .......................................... 1 Terminal Converter ............................................................................................................. .......................... ...

  • Network Technologies CS-16/8 - page 4

    iii Disconnect 2 ports ............................................................................................................. ..................................... 36 Attach or det ach a modem ....................................................................................................... ............................... 36 Reset SERIM ...

  • Network Technologies CS-16/8 - page 5

    iv TABLE OF FIGURES Figure 1- Mount S witch in a Rack ............................................................................................... ....................................................... 5 Figure 2- Distinction of connections between TERMINAL and SERIM UX .............................................................. ............ ...

  • Network Technologies CS-16/8 - page 6

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 1 INTRODUCTION The SERIMUX-TERM-CS-x (x=8 or 16) combines a 8 or 16 port Console Switch (SERIMUX) and a VT100/ANSI Terminal Converter (TERMINAL) in a single pack age controlled by a PS/2 keyboard and VGA monitor. The Cons ole Switch uses menu- driven integrated software. The SERIMUX-TERM-CS-16 can ...

  • Network Technologies CS-16/8 - page 7

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 2 Console Switch The Console Switch (SERIMUX) inclu des a text-based menu fo r easy connection management for administrators. Using a terminal emulator the menu pr ovides a quick means for us er serial connection cha nges and device control. The Console Switch (SERIMUX) is a serial p ort router th ...

  • Network Technologies CS-16/8 - page 8

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 3 MA TERIALS Materials Supplied with the NTI SERIMUX-TERM-C S16 Terminal Converter with Console Sw itch: +6 Manu al CD Materials Not Supplied, but REQUIRED : Serial cable with at least on e RJ45 male end for connection to t he Console Switch from each dev ice to be connected. See “Seria l Port P ...

  • Network Technologies CS-16/8 - page 9

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 4 FEA TURES AND FUNCTIONS 1. Power LED - indicates operation status Green=Power-On, Video Input Signal OK Red = Suspend / Stand-by, or no Video Input Signal 2. Port LEDs - LEDs will illuminate to indicate active admi nistrator port an d data traffic; also used to indicate port or user number when ...

  • Network Technologies CS-16/8 - page 10

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 5 1. INST ALLA TION 1.1 Rack Mounting Instructions This NTI switch was designe d to be directly mounted in a ra ck and includes a mounti ng flange to make attachment easy. Install 4 cage nuts (supplied) to the rack in locations that line up with the holes (or slots) in the mounting flange on the N ...

  • Network Technologies CS-16/8 - page 11

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 6 1.2 TERMINAL vs. SERIMUX Cable Connections The connectors on the rear of the SERIMUX-TERM-CS-16 are spli t between those for the TERMINAL conn ections, and those for the SERIMUX connections (see Figure 2). Figure 2- Distinction of connections bet w een TERMINA L and SERIMUX 1.3 Connect Devices, ...

  • Network Technologies CS-16/8 - page 12

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 7 1.4 Connect the SERIMUX and TERMINAL to a Network To control the SERIMUX and TERMINAL throug h a network c onnected PC, connect a CAT 5 Ethernet network cable to the connector marked "TERMINAL-10 BASE T ". Then connect the other e nd of the Ethernet cable to a Loca l Area Network (LAN) ...

  • Network Technologies CS-16/8 - page 13

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 8 2. GETTING ST ARTED Introduction This chapter covers basic configuration to pics. Included is in formation on setting up the TERMINAL to control the SERIMUX. 1. Using the instruction under “Setup The T ERMINAL” below (or more detailed instructi on on page 37), setup the TERMINAL to make conn ...

  • Network Technologies CS-16/8 - page 14

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 9 The following lists only what is necessary to c onnect to SERIMUX. For a complete list of features, see page 37 . F2 - Genrl SETUP Menu Personality set to Digital Equipment VT-100 or Console ANSI F4 - Comm SETUP Menu Baud Rate set to 9600 Ethernet Mode set to O FF to set the communication routin ...

  • Network Technologies CS-16/8 - page 15

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 10 2. To connect to an attached CPU, enter the number of the port the CPU is connected to and press [ Enter ] . Figure 7- Startup- A ccessible host list ...

  • Network Technologies CS-16/8 - page 16

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 11 3. USING THE SERIMUX CONSOLE SWITCH The SERIMUX-TERM-CS-16 is control led using • Terminal Control- using a con nected keyboar d, VGA Monitor and the bui lt-in TERMINAL • Serial Control- from a "dumb" terminal- locall y-connected - through an external modem from a remote location ...

  • Network Technologies CS-16/8 - page 17

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 12 3.1 Administrator Controls 3.1.1 Login as the administrator 1. The TERMINAL must first be configured (and is typical ly de livered preconfigured) as describe d on page 8 under "Getting Started”. 2. Press [ Enter ] on the keyboard, wait three (3) seconds, and the po rt will open to the &q ...

  • Network Technologies CS-16/8 - page 18

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 13 3.1.2 Port List From the Administrator main menu, press [ 1 ] to display the Port List. Figure 9- The Port list displays the status of all port s The Port list displays t he following information: Column Heading Description Port Port number and name Log Index number of the user logged in at the ...

  • Network Technologies CS-16/8 - page 19

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 14 FYI: RE: DscTime ( Disconnect Time) The value shown in the Port list is derived from various sources depending on t he type of connection active at the time. - If a user is logged into a port as ju st a user, the ti me shown will be the remaining time based on th e user's timeout se tting. ...

  • Network Technologies CS-16/8 - page 20

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 15 From the Port settings menu, the configurat ion of each port can be viewed and changed. Setting Description Value Port name Change the port name Max. 15 characters Port type Host or User H or U In-band disconnect sequence Select characters to use for in- band disconnect seque nce 1 + code for 1 ...

  • Network Technologies CS-16/8 - page 21

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 16 3.1.3.1 Port serial settings From the "Port settings" menu, press [ 5 ] to display the "Port serial settings" menu. Using this menu, the administrat or can adjust the serial settings of each port, or copy the current port se rial settings and paste them to another port or to ...

  • Network Technologies CS-16/8 - page 22

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 17 Note: If a modem is atta ched to the port, and hardware a nd/or software flow control is used, the appropriate command may be added to t he modem initialization string: Flow control Command 1 Command 2 None – – RTS/CTS (hardware) &K3 Q3 Xon/Xoff (software) &K4 Q1 Both &K6 disa ...

  • Network Technologies CS-16/8 - page 23

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 18 3.1.3.1.10 Copy Port Serial Settings – Press [ + ] to select the current port as source in a por t settings copy-paste process (except port 0). – Then, press [ * ] to paste the port settings. – Press [ Y ] to paste the selected port settings to the current port, [ A ] to paste to all port ...

  • Network Technologies CS-16/8 - page 24

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 19 Display modem settings for different port numbe r Press [ > ] (greater than symbol) to display the next port (next higher port index) modem set tings, or press [ < ] (less than symbol) to display the previous port modem settings. Press [ Esc ] or [ Space ] to return to the "Port sett ...

  • Network Technologies CS-16/8 - page 25

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 20 3.1.4 User List From the administrator main menu, press [ 4 ] to display the User list. Figure 15- User List Column Heading Description User User Index number User Name User name associated with the inde x number En User status- "Y" = enabled " -" = not enabled Adm Displays ...

  • Network Technologies CS-16/8 - page 26

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 21 3.1.5 User Settings From the "Administrator main menu", press [ 5 ], enter the user index number, then press [ Enter ]. The screen will show the current user num ber and name and the user settings menu: Figure 16- User settings menu Setting Description Value User name Change the user ...

  • Network Technologies CS-16/8 - page 27

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 22 Figure 17- Port access list for User 01 3.1.5.1 Port access To quickly grant/deny user access to multiple ports, the use of a dash (-) and/or comma may be used in conj unction with the [1] (to grant) or [ 0 ] (to deny) command. i.e. [ 1 ] - [ 1- 4,7,9,15 ] will grant access to ports 1 through 4 ...

  • Network Technologies CS-16/8 - page 28

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 23 3.1.6 Advanced Settings From the "Administrator main menu", press [ 7 ] to display the “Advanc ed settings” menu. F igure 18- Administrator's Advanced settings menu From the "Advanced settings" menu the administ rator can perform the following functio ns: Setting De ...

  • Network Technologies CS-16/8 - page 29

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 24 3.1.6.2 Firmware From the Advanced settings menu, press [ 6 ] to display the F irmware menu. (F rom Administrator main menu press [ 7 ]-[ 6 ]) Figure 19- Firmware menu The Firmware menu has three possible fu nctions: Function Description 1. About Firmware Provides information about SERIM UX inc ...

  • Network Technologies CS-16/8 - page 30

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 25 Figure 20- T he SERIMUX is waiting to save its firm w are The terminal program in the CP U connected to Port 1 must be configured for Xmodem protocol. 1. Receive the binary file from the SERIMUX (for example, in HyperTerminal for Windows, use the Transfer -> Recei ve File command). 2. When s ...

  • Network Technologies CS-16/8 - page 31

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 26 3.2. User Controls Users can connect only to accessible ports as defined by the adm inistrator. A list of those ports will b e displayed with a successful login. Connection can be ma de using the TERMIN AL, or a serial terminal with an emulator (e .g. Windows HyperTerminal) connected to the SER ...

  • Network Technologies CS-16/8 - page 32

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 27 3.2.2 User main menu The User main menu includes : • user index number and nam e • index number and name of the login port • user command list Figure 22- User main menu From the "User main menu" the followin g functions are possible: Function Keystroke Connect to host port [1]-[ ...

  • Network Technologies CS-16/8 - page 33

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 28 3.2.3 Port List screen From the "User main menu", press [ 3 ] to display the list of user accessible port s and information abo ut these ports. Only the administrator can change the communication settings. Figure 23- A limited user accessible Port list On consecutive columns, the foll ...

  • Network Technologies CS-16/8 - page 34

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 29 3.2.4 User Terse mode This mode is especially useful when the SE RIMUX is directly cont rolled by externa l software from a serial console (as a user without administrative privileges), ra ther than being controlled by a user from a keyboard interface. Entering short command strings performs fu ...

  • Network Technologies CS-16/8 - page 35

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 30 ¾ Verbose mode Send or type in: [ V ] [ Enter ] The answer will be: OK [ CR ][ LF ] and the Terse mode will be terminated. The “Accessible hos t list” or the “User main menu” will be display ed. ¾ User Logout Send or type in: [ L ] [ Enter ] The answer will be: OK [ CR ][ LF ] With th ...

  • Network Technologies CS-16/8 - page 36

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 31 3.3 Firmware Upgrade It may be desired to upgrade the firmware that controls the SERIMUX as soon as improved ve rsions become ava ilable. Once the firmware file has been downloade d from www.networktechinc.com to a loc al CPU, follow these instructions to install it. 1. Using a CPU connected to ...

  • Network Technologies CS-16/8 - page 37

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 32 F igure 28- Last confirmation before firmware update 7. Using the terminal program, s end the binary firmware file using “ 1K Xmode m ” protocol. Figure 29- File transfer in progress 8. After successful transmission the SERIMUX will automatically rest art after few seco nds. If not, either ...

  • Network Technologies CS-16/8 - page 38

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 33 KEYP AD CONTROL Figure 30- Keypad and LEDs Functions of the Keypad During normal operation, the current adminis trator port number (if any) is displ ayed on the front panel. The corresponding port LED will be continuously illuminate d. The data traffic between co nnected ports is indicated by t ...

  • Network Technologies CS-16/8 - page 39

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 34 Disconnect the administrator or a u ser with administrative privileges Action (from Keypad) Reaction of S ERIMUX 1. Press DISCON - The LED “Discon” will illumina te. - The port 0 LED will be illuminat ed, t he other port LEDs will be OFF. 2. Press ADMIN - The LED "Admin" will illu ...

  • Network Technologies CS-16/8 - page 40

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 35 Login user to a port and connect the user port to a host port Action (from Keypad) Reaction of SERIMUX 1. Press USER - The LED “User” will illuminate. - The port 0 LED will be illuminated, the other port LEDs will be OFF. 2. Enter the user number - The corresponding port LED will illuminat ...

  • Network Technologies CS-16/8 - page 41

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 36 Disconnect 2 ports Action (from Keypad) Reaction of S ERIMUX 1. Press DISCON - The LED “Discon” will illumina te. - The port 0 LED will be illuminat ed, t he other port LEDs will be OFF. 2. Press PORT - 3. Enter the port number - The corresponding port LED will illum inate, the other port L ...

  • Network Technologies CS-16/8 - page 42

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 37 4. USING THE TERMINAL 4.1 How To Setup The TERMINAL The TERMINAL is compatible with most CP Us and application pack ages. A menu driven setup system is provided to select an d save the settings required by the CPU and applic ation. To c ontrol the CPU, or in this case the SERIMUX, a user must b ...

  • Network Technologies CS-16/8 - page 43

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 38 4.2 Changing The TERMIN AL Operating Parameters To select one of the setup menus shown, press the indicat ed function key. - The screen for that menu appear s with the name high lighted. - The fields at the middle of the screen indica te the parameters that can be changed in that menu. - The to ...

  • Network Technologies CS-16/8 - page 44

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 39 Auto Scroll causes the data to scroll up a line when the cursor moves past the last line of the page. Monitor causes the terminal to display symbols for escape sequ ences and control codes without ac ting on them (test feature). Status Line sets the top line of the screen as the status line. En ...

  • Network Technologies CS-16/8 - page 45

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 40 Comm Mode sets the SERIAL1 port communication mode to full dupl ex (FDX), block (BLK), half duplex (HDX), or half duplex block (HBLK). Multiple Sessions defines whether an Ethernet connectio n supports multiple sessions function. ON : indicates the terminal sup ports multiple sessions. Each ses ...

  • Network Technologies CS-16/8 - page 46

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 41 Table 3- Programmab le Keys Enhanced PC-Style Key board Enhanced PC-Style Keyboa rd F1 through F12 ENTER (Both ENTER keys are progr ammable) (UP ARROW) ESCAPE (DOWN ARROW) HOME (LEFT ARROW) INSERT (RIGHT ARROW) PAGE DOWN BACKSPACE PAGE UP DELETE PRINT SCREEN END TAB F8 - Ansbk SET-UP Menu A mes ...

  • Network Technologies CS-16/8 - page 47

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 42 F11 - Colr2 Set-up Menu The color functionality differs with emu lat ion. In general VT100, VT220 an d ANSI C onsole work with applications, which control the color directly. The remaining person alities associate colors based on existing mo nochrome video attributes. This section wi ll define ...

  • Network Technologies CS-16/8 - page 48

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 43 Table 5- Color Palettes Palette Display Attribute Foreground Color Background Color 0 Normal Reverse (or blank) *1 Intensity *2 Intensity *2 and reverse (or blank) *1 Underline Underline and reverse( or blank) *1 Underline and intensity *2,*3 Underline, intensity, *2 and reverse (or blank) *1 G ...

  • Network Technologies CS-16/8 - page 49

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 44 Table 5- Color Palettes (Cont'd) Palette Display Attribute Foreground Color Background Color 6 Normal Reverse (or blank) *1 Intensity *2 Intensity *2 and reverse (or blank) *1 Underline Underline and reverse (or blank) *1 Underline and intensity *2,*3 Underline, intensity, *2 and reverse ( ...

  • Network Technologies CS-16/8 - page 50

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 45 4.3 Local Keyboard Commands Table 6 lists local keyboard comman ds in the terminal's native mode. Table 6- Local Key board Commands in Native Mode Key Sequence by keyboard Style Command Enhanced PC Toggle CAPS LOCK on/off CAPS LOCK Toggle NUM LOCK on/off NUM LOCK Put terminal in SETUP mode ...

  • Network Technologies CS-16/8 - page 51

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 46 4.4 TERMINAL Command Guide 4.4.1 Commands Supported in ASCII Personalities Table 8 lists all the ASCII commands recogni zed by the terminal . The native mode code for the command is given in the second column. (The native mode includes WY-32 5,WY-120 and WY-60.) T he remaining colum ns show the ...

  • Network Technologies CS-16/8 - page 52

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 47 Table 7- Commands Supporte d in ASCII Personalities (Cont'd) Command FUNCTION Native Mode Wyse WY-50+ ADDS VP A2 TVI 910+/925 PC Term ACK mode off ESC e 6 Same ENH ACK mode on ESC e 7 Same ENH Full-duplex mode on ESC C ESC D F Same Same ESC } Half-duplex mode on ESC C ESC D H Same Same ESC ...

  • Network Technologies CS-16/8 - page 53

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 48 Table 7- Commands Supporte d in ASCII Personalities (Cont'd) FUNCTION Native Mode Wyse WY-50+ ADDS VP A2 TVI 910+/925 PC Term -Program function key definition ESC z fkey Same ENH ENH sequence DE L Program key direction and ESC Z dir Same Wyse ESC | p1 p2 definition key/fkey sequence sequen ...

  • Network Technologies CS-16/8 - page 54

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 49 Table 7- Commands Supporte d in ASCII Personalities (Cont'd) FUNCTION Native Mode Wyse WY-50+ ADDS VP A2 TVI 910+/925 PC Term Display Memory/Split Screen Divide memory into pages ESC w length Same ENH Display previous page ESC w B or ESC J *8 Same ENH ESC J Display next page ESC w C or ESC ...

  • Network Technologies CS-16/8 - page 55

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 50 Table 7- Commands Supporte d in ASCII Personalities (Cont'd) FUNCTION Native Mode Wyse WY-50+ ADDS VP A2 TVI 910+/925 PC Term Graphics Charact ers Graphics mode on ESC H CTRL B Same ESC $ ESC $ Graphics mode off ESC H CTRL C Same ESC % ESC % Display graphics character ESC H ldraw Same Cont ...

  • Network Technologies CS-16/8 - page 56

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 51 Table 7- Commands Supporte d in ASCII Personalities (Cont'd) FUNCTION Native Mode Wyse WY-50+ ADDS VP A2 TVI 910+/925 PC Term Editing (Cont'd) Insert line of spaces ESC E Same ENH Same Same Delete cursor character ESC W Same ENH Same Same Delete cursor line ESC R Same ESC l Same Same ...

  • Network Technologies CS-16/8 - page 57

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 52 Table 7- Commands Supporte d in ASCII Personalities (Cont'd) FUNCTION Native Mode Wyse WY-50+ ADDS VP A2 TVI 910+/925 PC Term Print Functions Print formatted page ESC P Same ENH Same Same Print formatted unprotected page ESC @ Same ENH Print unformatted page ESC p or ESC L Same ESC p ESC L ...

  • Network Technologies CS-16/8 - page 58

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 53 4.4.2 Variable Values for Table 7 Commands answer Up to 20 characters to defin e answerback message attr Display Attributes attr Display Attributes SPACE Space charact er p Dim 0 Normal q Dim and invisible 1 Blank r Dim and blink 2 Blink s Dim, blink, invisible 3 Blink and Blank t Dim and rever ...

  • Network Technologies CS-16/8 - page 59

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 54 Variable Values for Table 7 Commands (Cont'd) fcolor Foreground Color fcolor Foreground Color 1 Black 5 Red 2 Bue 6 Magenta 3 Green 7 Yellow 4 Cyan 8 White Function Key field unshifted field shifted Function Key field unshifted field shifted F1 0 P F7 6 V F2 1 Q F8 7 W F3 2 R F9 8 X F4 3 S ...

  • Network Technologies CS-16/8 - page 60

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 55 Variable Values for Table 7 Commands (Cont'd) length Multiple Length of Page G 1xlines Equal to the number of data lines H 2xlines Double the number of data lines I *b 4xlines Four times the number of data lines *b Available only in WY-50+ personality. Line/Column lin e/col *c Line/Column ...

  • Network Technologies CS-16/8 - page 61

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 56 Variable Values for Table 7 Commands (Cont'd) p1 Function Key p1 Function K ey 1 F1 6 F6 2 F2 7 F7 3 F3 8 F8 4 F4 9 F8 5 F5 0 F10 P2 Function Key 1 Remote 2 Local 3 Normal Page Page 0 page 0 In the 80 colu mns mode: There have 4 pages of displ ay memory. 1 page 1 In the 132 colu mns mode: ...

  • Network Technologies CS-16/8 - page 62

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 57 Variable Values for Table 7 Commands (Cont'd) wnd/page Windo w or Page 0 Page 0 or upper window 1 Page 1 or lower window Word Data Word 0 7 bits 1 8 bits wpca Write-Protected Display Attribute wpca Write-Protected Display Attribute 6 Reverse *g C Invisible on 7 Dim *g E Underlin e on A Nor ...

  • Network Technologies CS-16/8 - page 63

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 58 Supported VT100, VT220 and Console ANSI Commands, Con t'd Command FUNCTION VT100, VT220 Console A NSI 132-column display CSI ?3 h Same 80-column display CSI ?3 l Same Smooth scrolling on CSI ?4 h Same Jump scrolling on CSI ?4 l Same Reverse screen video on CSI ?5 h Same Normal screen video ...

  • Network Technologies CS-16/8 - page 64

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 59 Supported VT100, VT220 and Console ANSI Commands (Con t'd) final Final characte r final Fin al character A Designating UK ANSI character set < Designating DEC suppleme ntal(VT220 only) B Designating ASCII character set DSCS Designating Down-lin e loadable character set 0 Designating DEC ...

  • Network Technologies CS-16/8 - page 65

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 60 Supported VT100, VT220 and Console ANSI Commands (Con t'd) Values for “ Psn ” in table on page 59 Psn Color Psn Color Psn Color Psn Color 0 Black 4 Red 8 Gray 12 Lt. Red 1 Blue 5 Magenta 9 Lt.Blue 13 Lt. Magenta 2 Green 6 Brown 10 Lt. Green 14 Yellow 3 Cyan 7 W hite 11 Lt. Cyan 15 Lt. ...

  • Network Technologies CS-16/8 - page 66

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 61 Supported VT100, VT220 and Console ANSI Commands (Con t'd) Command FUNCTION VT100, VT220 Console A NSI Editing Functions (Cont 'd) Erase erasable characters from start of display CSI ?1 J Same to cursor Erase erasable characters in entire d isplay CSI ?2 J Same Erase erasable characte ...

  • Network Technologies CS-16/8 - page 67

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 62 Supported VT100, VT220 and Console ANSI Commands, Con t'd kc Unshifted function key kc Unshifted function key 6 F1 38 F7 7 F2 39 F8 8 F3 40 F9 9 F4 41 F10 10 F5 43 F11 37 F6 44 F12 hc Hexadecimal representation of charact er string assigned to the function key. Note: Multiple function key ...

  • Network Technologies CS-16/8 - page 68

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 63 Supported VT100, VT220 and Console ANSI Commands (Con t'd) Command FUNCTION VT100, VT220 Console A NSI Auxiliary Keypad Modes Auxiliary keypad numeric mode on ESC > Same Auxiliary keypad application m ode on ESC = Same Transmission/Printer Control Transmit through cursor position CSI 16 ...

  • Network Technologies CS-16/8 - page 69

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 64 Supported VT100, VT220 and Console ANSI Commands, Con t'd Command FUNCTION VT100, VT220 Console A NSI Request keyboard status report CSI ? 26 n Same Respond with key board language CSI ? 27; Ps n Same (see table below for values of “Ps”) Values of Ps (above) Ps Keyboa rd Language Ps Ke ...

  • Network Technologies CS-16/8 - page 70

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 65 4.6 Using Printer Server via Ethernet Connection Introduction In order to send print jobs to a network-based pri nter, the Et hernet Print Terminal function in the TERMINAL must be used. To use this function, the Telnet Terminal communic ation option descr ibed on page 1 is available. For this ...

  • Network Technologies CS-16/8 - page 71

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 66 4.6.2 Setup for LPD Follow those steps from step 1 to step 2 described in Basic Se tup. The following steps ar e dep endent on the operating system. Please refer to the UNIX administration guide. The follo wing illustrat ed steps are under BSD system. Step 3. Create a spooling dir ectory Use mk ...

  • Network Technologies CS-16/8 - page 72

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 67 4.6.3 LPD printing LPD protocol is built-in to most of the UNIX system. However, deta iled implementat ion of LPD differs among UNIX systems. Please refer to the UNIX administration guide for reference. T he following illustrated printing comma nd is under BSD system or System V version. For BS ...

  • Network Technologies CS-16/8 - page 73

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 68 5. HARDW ARE INFORMA TION Introduction This chapter provides information o n har dware specifications, pinouts for the Ethernet cable, pi nouts for port connectors, and pinouts for the cable adapters. 5.1 Hardware Specifications: TERMINAL Physical Size (In.) WxDxH 19x18.4x1.75 Weight 23.3 lbs. ...

  • Network Technologies CS-16/8 - page 74

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 69 5.3 CPU-to-RACKMUX Ethe rnet Crossover Cable In order to make a direct connection between a CPU and th e ETHERNET connector of the RACKMUX, a crossover cable must be used. The cable is made with CAT5 cable terminated wit h RJ45 conn ectors and wired according to the chart below. Pin assignment ...

  • Network Technologies CS-16/8 - page 75

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 70 5.6 Cable Adapters The SERIMUX comes with four cable adapt ers. The following illustrations sho w cable adapter pin outs. Additional ad apters can be purchased from NTI. DB25 Male Console Adapter (NTI P/N DB25M-RJ45F-T) DB25 Male to RJ45 Conne ctor Pin Assignments RJ45 Signal DB25M Signal 1 CTS ...

  • Network Technologies CS-16/8 - page 76

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 71 DB25 Female Console A dapter (NT I P/N DB25F-RJ45F) DB25 Female to RJ45 Pin Assignments RJ45 Signal DB25F Signal 1 CTS Connected to 4 RTS 2 DSR 5 DCD Connected to 20 DTR 3 RxD Connected to 2 T xD 4 GND Con nected to 7 GND 6 TxD Connected to 3 RxD 6 DCD 7 DTR Connecte d to 8 DSR 8 RTS Connected ...

  • Network Technologies CS-16/8 - page 77

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 72 5.7 TERMINAL Connector Pin Assignments Serial Port (Serial 2) Connector Pin Assignments (RS232C 9-pin connecto r) Pin Signal Mnemonic Direction 1 Data carrier detect DCD In 2 Receive dat a RxD In 3 Transmit data TxD Out 4 Data terminal ready DTR Out 5 Signal groun d SGND 6 Data set ready DSR In ...

  • Network Technologies CS-16/8 - page 78

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 73 Appendix A - SERIMUX Port Characteristi cs Every port is defined through the followin g parameters: Description Acceptable Value Default Value Number 0-8/16/24/32 Same (not changeable) Name Up to 15 characters “Port00” to “Port32” Type – port 0 User User (not chan geable) Type – exc ...

  • Network Technologies CS-16/8 - page 79

    NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH 74 INDEX access to ports, 22 administrator password, 23 ASCII commands, 46 BSD UNIX system, 67 cable adapters , 70 cabling, 69 change administrator password, 23 configure the terminal, 8 connect to SERIMUX. connectors, 6 Console Terminal, 1 crossover cable, 69 Crossover cable, 7 Default settings, ...

Manufacturer Network Technologies Category Switch

Documents that we receive from a manufacturer of a Network Technologies CS-16/8 can be divided into several groups. They are, among others:
- Network Technologies technical drawings
- CS-16/8 manuals
- Network Technologies product data sheets
- information booklets
- or energy labels Network Technologies CS-16/8
All of them are important, but the most important information from the point of view of use of the device are in the user manual Network Technologies CS-16/8.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Network Technologies CS-16/8, service manual, brief instructions and user manuals Network Technologies CS-16/8. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Network Technologies CS-16/8.

Similar manuals

A complete manual for the device Network Technologies CS-16/8, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Network Technologies CS-16/8 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Network Technologies CS-16/8.

A complete Network Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Network Technologies CS-16/8 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Network Technologies CS-16/8, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Network Technologies CS-16/8, that we can find in the current document
3. Tips how to use the basic functions of the device Network Technologies CS-16/8 - which should help us in our first steps of using Network Technologies CS-16/8
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Network Technologies CS-16/8
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Network Technologies CS-16/8 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Network Technologies CS-16/8?

Use the form below

If you did not solve your problem by using a manual Network Technologies CS-16/8, ask a question using the form below. If a user had a similar problem with Network Technologies CS-16/8 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)