English dropdown-ico

Manual Haier L32A9 -AK

53 pages 1.2 mb
Download

Go to site of 53

Summary
  • Haier L32A9 -AK - page 1

    Please read this manual carefully before operating t he unit, and keep it for futu re reference. TFT -LCD COL OUR TELEVISION RECEIVER OWNER'S MANUAL This User's Manual is applicable for the following models: + L32A9-AK,L32A9-AK,L32A9 -AK,L32A9-AKF ...

  • Haier L32A9 -AK - page 2

    Congratulations on your purchase, and welcome to the family ! Dear Haier product owner: Thank you for your confidence in Haier. You`ve selected one of the best-built, best-backed products available today. We`ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the Haier family, you`re entitled to ...

  • Haier L32A9 -AK - page 3

    CONTENT BEFORE OPERA TING W arning.................................................................................................................1 Important Safety Instructions.................. ..............................................................2 Buttons and interface location........................................................... ...

  • Haier L32A9 -AK - page 4

    W ARNING *To avoid electric hazards, it is strongly suggested that the back cover not be opened, as there is no any accessory inside the casing. *If necessary, please contact authorized after-sales services. *A lighting flash mark in a triangle: A potentially hazardous situation, which, if not avoided, could result in serious injury by high voltage ...

  • Haier L32A9 -AK - page 5

    Important Safety Instructions The product should be tightly fixed to avoid drop damages and even fire. To avoid fire hazards, do not use this product under direct sunlight or closely to heat sources. Do not locate the product close to water or oil, which may cause fire hazards. Unplug the power supply and antenna of the product when there is a rain ...

  • Haier L32A9 -AK - page 6

    ...

  • Haier L32A9 -AK - page 7

    Front panel Control Buttons and functions - This is a simplified representation of front panel. - Here shown may be somewhat different from your TV . Buttons and interface location 4 - CH + - VOL + TV/A V MENU POWER 1 CH-/+ : 2 VOL-/+ : 3 TV/AV : :TV-VIDEO-SIDE VIDEO-S VIDEO-YUV- USB-VGA-DVI 4 MENU: 5 6 POWER : AC power on/off 7 8 Multi-media input ...

  • Haier L32A9 -AK - page 8

    Buttons and interface location Rear panel Control 5 VIDEO L AUDIO R USB Socket AUDIO Input connect to hear stereo sound from an external device . VIDEO Input Connects the video signal from a video device. DVI Input Connect the monitor output connector from a PC to the appropriate input port. Antenna Input Connect cable or antenna signals to the TV, ...

  • Haier L32A9 -AK - page 9

    Remote controller Precautions Battery loading 1.Slide open the cover of the battery compartment on the back of the remote controller. 2.Load two 7# (AAA)alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. Make sure that there is no obstacle between the remote controller an ...

  • Haier L32A9 -AK - page 10

    Remote controller key function 7 The remote controller cannot be operated unless the batteries are properly loaded. Note: The function just takes the remote control for example in this manual P+/-(CH+/-),V+/-(VOL+/-),MENU,TV/AV and POWER on TV panel are corresponding with the CH+/-,VOL+/-,MENU,TV/AV and POWER keys. DISPLA Y POWER MUTE STILL I/II PI ...

  • Haier L32A9 -AK - page 11

    DISPLAY POWER MUTE STILL I/II PIC.SIZE TV/AV S-VIDEO DVD/DTV PC/DVI OK Q.VIEW CH+ CH- VOL- VOL+ MENU PSM 12 3 4 5 6 78 9 -/-- 0 ZOOM/MOVE USB PIP SWAP SCAN CH.EDIT SHUTTLE SLEEP H.LOCK TIME.SKIP ZOOM RETURN S SM HELP ENTER 8 above below 20 20 left right front 8m 45 45 Ensure the remote controller is pointed toward the remote controller windows on t ...

  • Haier L32A9 -AK - page 12

    ANT IN External Equipment Connections Note * It is recommended that you'd better use 75 * Don't bind antenna cable and electric wire together. coaxial cable to remove the disturbance caused by airwave. outdoor antenna 300 twin-lead cable Antenna adapter 75 coaxial cable Plug (additional purchase) Antenna input 75 standard coaxial type - A ...

  • Haier L32A9 -AK - page 13

    DVI-DTV OUTPUT R AUDEO L RGB-DTV OUTPUT R AUDEO L YP bP r R AUDEO AUDIO AUDIO DVI IN AUDIO VGA IN VGA Pr/Cr Pb/Cb Y LR AUDIO AUDIO S-VIDEO Pr/Cr Pb/Cb Y LR VIDEO LR DVD setup How to connect 1 . Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr) INPUT jacks on the TV and connect the DVD audio outputs to the AUDIO INPU ...

  • Haier L32A9 -AK - page 14

    AUDIO DVI IN AUDIO VGA IN VGA PC setup How to connect 1. Use the TV`s VGA IN or DVI (Digital Visual Interface) IN port for video connections, depending on your PC connector. If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of either VGA IN or DVI INPUT to display the PC on the TV . If the graphic ...

  • Haier L32A9 -AK - page 15

    External Equipment Connections Connect Woofer 1. T ake the woofer out, and place it the hind rind. (See pictu re) 2. Connect cable to the woofer terminal and LCD TV terminal, and insert the connecting cable into the terminal slot. 12 ...

  • Haier L32A9 -AK - page 16

    Power source TO USE AC POWER SOURCE Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard polarized AC outlet. NOTES: Never connect the AC line cord plug to other than the specified voltage. Use the attached power cord only . If the polarized AC cord does not fit into a non- polarized AC outlet, do not ...

  • Haier L32A9 -AK - page 17

    Power ON/OFF Indicator Remote receiving window Switching ON/OFF the TV set In the manual, the OSD (on screen display) may be different from your TV`s because it is just an example to help you with the TV operation. Switching ON/OFF the TV set 1 Please press down the power switch to switch on AC power supply and the power indicator will light . 2 If ...

  • Haier L32A9 -AK - page 18

    Choose the input source Press TV/AV button on remote controller, the menu appears on the screen. Then press CH+/- to select the TV item, and press VOL+/- to ensure it. Source Select input modes If you hope to enjoy the picture from the external input source, before to select the source, you need to connect the devices, otherwise, when you select th ...

  • Haier L32A9 -AK - page 19

    OK Q.VIEW CH+ CH- VOL- VOL+ MENU PSM S SM This T V set has three methods to set channels, which are respectively full automatic, manual search fine tune. In this section, how to use the remote control to set channel is explained. Y ou can also use buttons on the TV set to set channel. Full automatic search mode Automatic search 1 Press the MENU but ...

  • Haier L32A9 -AK - page 20

    OK Q.VIEW CH+ CH- VOL- VOL+ MENU PSM S SM Manual search Manual search 1 Press the CH+/- buttons or the PROGRAM NUMBER 0-9 button to choose desired channels regard channel 1 as example 2 Press the MENU button and VOL+/- button, till the TUN. menu shown on the right display on the screen. 3 buttons to select " Manual Search " item. Press th ...

  • Haier L32A9 -AK - page 21

    12 3 4 5 6 78 9 0 TV/A V S-VIDEO DVD/DTV PC/DVI Watching TV Program You can watch T V program in a presetting channel. Watching TV program How to select the desired program 1 Using "Program number" buttons. Directly enter the channel number with the numeric keypad on the remote control. If to select channel numbers of double-digit or thre ...

  • Haier L32A9 -AK - page 22

    OK Q.VIEW CH+ CH- VOL- VOL+ MENU PSM S SM If the color of some channel is abnormal Usually this should be set in the auto position. However if the color displayed on the screen are incorrect, you can manually select the correct color system. Press the menu and VOL+/- button, till the picture menu shown on the right will display on the screen. Press ...

  • Haier L32A9 -AK - page 23

    OK Q.VIEW CH+ CH- VOL- VOL+ MENU PSM S SM OK Q.VIEW CH+ CH- VOL- VOL+ MENU PSM S SM Watching TV Program continued Watching TV program Quick program view 1 Suppose the channel number you used just now is 8 and the channel number you are using is 18 (as shown in the figure). If you want to return to the last watched program channel 8, you can simply ...

  • Haier L32A9 -AK - page 24

    Multiple picture modes Picture Control Functions How to customize your own picture status Brightness Contrast Sharpness Chroma Hue (only in NTSC mode) BackLight Dark Weak Soft Shallow More purple Green Bright Strong Sharp Deep More green Red ITEM Press VOL- Press VOL+ How to select picture modes You can quickly select the desired picture mode from ...

  • Haier L32A9 -AK - page 25

    DNR( Digital Noise Reduction) 1 Afte r cal ling up th e Picture me nu, p ress CH+/- button to s elect item. "DNR" 2 Press VOL+ to e nter the list. Select Auto, Off , Weak according to the image noise. , Me dium or Strong 3 Press MENU return to the picture menu. Automatically filters out and reduces the image noise and improves picture qua ...

  • Haier L32A9 -AK - page 26

    OK Q.VIEW CH+ CH- VOL- VOL+ MENU PSM S SM Multiple sound modes How to choose sound mode How to customize your own sound quality Press the SSM button to select the desired sound quality. Four kinds of sound modes (i.e., Personal ,and Music ) can be selected in turn. Standard , Theater , 1 Press MENU button and VOL+/- button , till the SOU. menu show ...

  • Haier L32A9 -AK - page 27

    This will adjust the output of the right and left speakers to obtain the best stereo reproduction for your listening position. The intermediate value is 0. When indication value of Balance increases toward+50, sound of the right and left speaker becomes stronger and weaker, respectively . When indication value of Balance decreases toward -50, sound ...

  • Haier L32A9 -AK - page 28

    MUTE Mute Mute When you need to pay attention to surrounded sounds, or there is a telephone calling you or there are some guests visiting you, the sound elimination (mute) function is very convenient. How to eliminate sound 1 Press the MUTE button on the remote control and "MUTE" type face will display on the lower part of the screen. At ...

  • Haier L32A9 -AK - page 29

    Time Functions On/off timer Clock setting Clock setting and timer on/off functions 1 Press button and VOL+/- button, and the TIME menu display on the Screen. MENU 2 Press CH+/- buttons select " Clock ",press VOL -/+ buttons to select hour or minute position, then press the digital buttons to set the value of hour or minute; 1 Press CH+/- ...

  • Haier L32A9 -AK - page 30

    Time Functions How to use the remind time and program Remind Time and Remind Program setting 1 Press button to call up the TIME menu on the screen. MENU and VOL+/- 2 Press CH+/- buttons to select " Remind Time ", then press VOL -/+ buttons to select hour or minute position; then press the digital to set the value of hour or minute.(take 1 ...

  • Haier L32A9 -AK - page 31

    Language English Menu Timeout 15seconds Menu Background Translucent BlueScreen Off Calendar 3A Optimize Off Time Skip 0 Min B C A Function menu Menu Timeout Repeat step 2 and 3 to set the menu out time. Each Press of VOL+/- button repeatedly to select the number of preset minutes, the time will be set in sequence: 5seconds, 10seconds, 15seconds, 20 ...

  • Haier L32A9 -AK - page 32

    Display Mode Normal Color Tem perature Normal Black S tretch On Adjust RGB Default Auto Sync. B C A Adjust menu 1 . Press MENU and VOL+/- button to enter the ADJ. menu. 2 . Press CH+/- to select desired item. 3 . Press VOL+/- button to adjust the values level. 4 . Press menu to exit. Display Mode You can also press PIC.SIZE button on remote control ...

  • Haier L32A9 -AK - page 33

    PC setting Press PV/DVI button to select PC or DVI mode. PC setting 30 Adjust menu In VGA and DVI input mode, H-Position and V-Position can be adjusted to eliminate transverse line interference and decentered picture. Display Mode Normal Color Tem perature Normal Black S tretch On Adjust RGB Default Auto Sync . B C A Only be adjustable in the VGA/D ...

  • Haier L32A9 -AK - page 34

    In VGA and DVI input mode, H-Position and V -Position can be adjusted to eliminate transverse line interference. PC setting 1 2 Press Press CH+/- buttons to select RGB , then press VOL- /+ buttons to enter the sub menu. CH+/- buttons to select the desired item, press VOL+/- button to adjust. 31 NOTE As the frequency of display differ in PC device y ...

  • Haier L32A9 -AK - page 35

    Press H.LOCK button, Password will appear on the screen. The initial password of the television is 0000 and security default password is 9443. then enter Lock Set menu.(as follow) Note: If the password is not correctly entered, you will be required to reenter the password and the cursor will stay at the first place. Press EXIT to cancel the window. ...

  • Haier L32A9 -AK - page 36

    Prog. Num Prog Num is opted for setting up preset channel. Press CH+/- button to select Prog Num. Press VOL /- button, to select channel number.(The item is not available except TV signal.) Source Lock Source Lock is opted to hinder external input modes, such as AV , Scart and VGA. Press CH+/- button to select the option, and press VOL+/- button to ...

  • Haier L32A9 -AK - page 37

    Max Volume Press CH+/- button to select Max Volume. Press VOL+/- button for adjustment between 0 100. If a certain value is set, when volume is being adjusted, the sound value can not exceed maximum volume value. If current volume is over Max V olume, when Lock Set menu is set, current volume will become set maximum volume. If current volume is bel ...

  • Haier L32A9 -AK - page 38

    Others functions Nicam Sleep display functions Display function Press the DISPLAY button, then the channel number and system will be displayed on the screen. Press again, it is disappear. the DISPLAY button DISPLAY Press the I/II button will result in fast swap of NICAM function of current program. NICAM 35 3 AUTO B/G Sleep The TV set will switch a ...

  • Haier L32A9 -AK - page 39

    Scan 1 If you want to select a desirable program, you may scan all the TV programs in memory. You can simply press Scan button to do this. Press scan button once, there are nice pictures on the screen, press Scan button again, there are sixteen pictures on the screen to scan. 2 If you want to stop the function during auto tunning, simply press Scan ...

  • Haier L32A9 -AK - page 40

    Stream media play prepare Stream media broadcast system 37 1 . Supporting equipment 1.Equipment supporting Mass and Storage agreements include USB, mobile hard disk, card reader, some MP3 and digital camera. 2.Equipment supporting PTP agreement includes some digital camera. 2 . 1 Supporting media : picture, music, MPEG4, MPEG2 and MPEG1; Supporting ...

  • Haier L32A9 -AK - page 41

    Stream media broadcast system 38 Stream media system setup Note : Memory cards or USB devices are not supplied with this TV. USB setup 1 Insert USB in the card slots at the left side the TV. 2 Insert it to be clicked in. 3 Press USB button on the remote controller to enter the stream media system. CARD setup SETUP File Copy USB2 Remove USB1 Press E ...

  • Haier L32A9 -AK - page 42

    Stream media broadcast system 39 Removing USB device 1 press RETURN button to exit menu. 3 Remove the memory card/USB device. 4 If to remove the card device, press RETURN button to return to the main menu, and remove the card. Press up or down to select Remove USB, and press ENTER button to ensure it. 2 Card data protection - Do not remove the card ...

  • Haier L32A9 -AK - page 43

    Stream media broadcast system 40 1. Press up or down to select the item with up or down. 2 Press or to select the desired item of submenu with left or right. 3 Press ENTER button to ensure the desired option to enter the submenu to resume the speed of standard. 4. Press or button to operate play quickly or slowly. 5.Press pause button to make the p ...

  • Haier L32A9 -AK - page 44

    To select stream media broadcast system Stream media broadcast system 41 1. Press up or down button to select Picture item. 2. Press ENTER button to enter the menu of play. 3. Press again up or down button to select desired enjoy picture, and then press ENTER button to enter the play menu. 4. On screen display, Press or to select the speed of play. ...

  • Haier L32A9 -AK - page 45

    To enjoy music Stream media broadcast system 42 1. Press up or down button to select "Music" option. 2. Press ENTER button to enter play menu. 3. Press up or down button to select desired music, and then press ENTER button to play music. Note: The play file menu are different with your USB device. 4. When playing music, press up or down t ...

  • Haier L32A9 -AK - page 46

    To play Movie Stream media broadcast system 43 1. Press up or down button to select "Movie" option. 2. Press ENTER to enter play menu. 3. Press again up or down button to select desired movie, and press again ENTER button to play it. 4. On screen display, press or button to select in turn: File -PlayBack Control-Audio channel-Play Mode 5. ...

  • Haier L32A9 -AK - page 47

    To select the Music and PIC item Stream media broadcast system 44 1. Press up or down button to select "Music and Pic" option, and press ENTER button to enter menu. 2. Press up or down to select desired file, and press button to ensure it. ( to cancel). Repeat step 2 to select more file, and press ENTER button to enter play menu. 3. On sc ...

  • Haier L32A9 -AK - page 48

    Copy file function Stream media broadcast system 45 1. Press up or down to select "File Copy" item. 2. Press ENTER button to enter the copy menu. 3. Press ENTER button to enter the file menu, and press up or down button to select "Card" or "USB" 4. Press ENTER button to enter Card or USB, and select the files to copy, ...

  • Haier L32A9 -AK - page 49

    To select language 1 . Repeat steps 1-2, and then press or to select version. 2 . Press ENTER button to display the version number . To display the version Languages Version V2.1.04250 1 . Press or to select "SETUP " item. 2 . Press ENTER button to enter the SETUP menu, 3 .and press again ENTER button to enter language option. 4 . Press o ...

  • Haier L32A9 -AK - page 50

    Specifications and functions Picture proportions 4:3/wide screen: (3 modes) Panorama picture: 16:9 Picture element: Multi-input compatibility Advanced technology for motion picture processing Two s peakers/optional Complex component: RCA-pin 3 Component video signal: YUV 1 S terminal: Mini DIN 4-pin 1 RGB input: D-sub 15-pin 1 (480i/p, 720p, 1080i, ...

  • Haier L32A9 -AK - page 51

    To remove dirt or dust , wipe the cabinet with a soft, dry , lint-free cloth. Please be sure not to use a wet cloth . Maintenance Cleaning the Screen - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin an ...

  • Haier L32A9 -AK - page 52

    Troubleshooting For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to the instructions listed hereunder before contacting the after-sales service for technical assistance. Note : Production of the screen requires high and precision technologies. However, there might be some dark or bright ...

  • Haier L32A9 -AK - page 53

    01 0090506321A ...

Manufacturer Haier Category Satellite TV System

Documents that we receive from a manufacturer of a Haier L32A9 -AK can be divided into several groups. They are, among others:
- Haier technical drawings
- L32A9 -AK manuals
- Haier product data sheets
- information booklets
- or energy labels Haier L32A9 -AK
All of them are important, but the most important information from the point of view of use of the device are in the user manual Haier L32A9 -AK.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Haier L32A9 -AK, service manual, brief instructions and user manuals Haier L32A9 -AK. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Haier L32A9 -AK.

Similar manuals

A complete manual for the device Haier L32A9 -AK, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Haier L32A9 -AK by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Haier L32A9 -AK.

A complete Haier manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Haier L32A9 -AK - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Haier L32A9 -AK, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Haier L32A9 -AK, that we can find in the current document
3. Tips how to use the basic functions of the device Haier L32A9 -AK - which should help us in our first steps of using Haier L32A9 -AK
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Haier L32A9 -AK
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Haier L32A9 -AK in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Haier L32A9 -AK?

Use the form below

If you did not solve your problem by using a manual Haier L32A9 -AK, ask a question using the form below. If a user had a similar problem with Haier L32A9 -AK it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)