English dropdown-ico

Manual TP-Link TD-W8900GB

88 pages 4.95 mb
Download

Go to site of 88

Summary
  • TP-Link TD-W8900GB - page 1

    TD-W8900GB 54M Wireless ADSL2+ ROUTER Rev: 1.0.2 1910010067 ...

  • TP-Link TD-W8900GB - page 2

    I COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specificat ions may be reproduced in any form or b y any means or used to make any derivativ ...

  • TP-Link TD-W8900GB - page 3

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide II FCC ST A TEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Ru les. These limits are designed to pr ovide reasonable protectio n against harmful interference in a residential installation. This equipment ge nerate ...

  • TP-Link TD-W8900GB - page 4

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide III National Restrictions 2400.0-2483.5 MHz Country Restriction Reason/remark Bulgaria General authorization r equire d for outdoor use and public service France Outdoor use limited to 10 mW e.i.r.p. w ithin the b and 2454-2483.5 MHz Military Radiol ocation use. Refarming of the 2.4 GHz band has been ...

  • TP-Link TD-W8900GB - page 5

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide IV Package contents The following contents should be found in your box: ¾ One TD-W8900GB 54M Wireless ADSL2+ Router ¾ One DC power Adapter for TD-W8900GB 54M Wireless ADSL2+ Router ¾ Quick Installation Guide ¾ One RJ45 cable ¾ Two RJ11 cables ¾ One ADSL splitter ¾ One Resource CD for TD-W8900G ...

  • TP-Link TD-W8900GB - page 6

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide V CONTENTS Chapter 1. About This U ser Guide .......................................................................... 1 1.1 Purpose ..................................................................................................................... 1 1.2 Conventions ............................... ...

  • TP-Link TD-W8900GB - page 7

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide VI 5.5 Wireless LAN Configuration .................................................................................... 54 5.5.1 Wireless – Basic ............................................................................................................. 54 5.5.2 Wireless – Security ............. ...

  • TP-Link TD-W8900GB - page 8

    1 Chapter 1. About This User Guide 1.1 Purpose For helping user know about TD-W8900GB 54M Wireless ADSL2+ Router better , use it accurately and adequately , maintain it expedientl y , we write this User Guide. This Guide introduces the product comprehensively , including the prod uct’s function s, parameters and specifications. It also explains h ...

  • TP-Link TD-W8900GB - page 9

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 2 Chapter 2. Product Overview 2.1 Overview of the Router Thank you for choosing the TD-W8900GB 54M Wireless ADSL2+ Ro uter . The Router is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet o r 802.11g/802.11b wireless network. The Router is easy to use. T ...

  • TP-Link TD-W8900GB - page 10

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 3 ¾ AFE to support Annex A/ B/C/I/J/K, Land M deployments. ¾ Provides external splitter . ¾ Adopts Advanced DMT modulati on and demodulation technology . ¾ Supports bridge mode and Router function. ¾ Multi-user sharing a high-speed Internet connection ¾ Conn ecting the internet on demand and di ...

  • TP-Link TD-W8900GB - page 11

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 4 2.4 T ransmit Dat a-rate ¾ Downstream data rates up to 24Mbps, upstream d ata rates up to 3.5Mbp s （ With Annex M enabled ） . ¾ Supports 54/48/36/24/18/ 12/9/6Mbps (IEEE 802.1 1g) and 1 1/5.5/2/1Mbps (IEEE 802.1 1b) WLAN data transfer rates. ...

  • TP-Link TD-W8900GB - page 12

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 5 Chapter 3. Hardware Installation Guide 3.1 The Front Panel The Router’s LEDs are located on the front panel. Figure 3-1 The LED indicators on the front panel include the Power , Sys tem , ADSL , WLAN and 1-4 (LAN) . The ADSL, WLAN and 1-4 (LAN) indicators m onitor link status and activity (Link/A ...

  • TP-Link TD-W8900GB - page 13

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 6 3.3 The Back Panel The Router's ports, where the cables are connected, and RESET button are located on the back panel. Figure 3-2 ¾ Antenna: Used for wireless operation and data transmit. ¾ Power: The Power plug is where you will connect the power adapter. ¾ LAN 1,2,3,4: Four 10/100Mbps RJ4 ...

  • TP-Link TD-W8900GB - page 14

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 7 3.5 Inst allation Environment Requirements ¾ The Router should not be located where it will be exposed to moisture or excessive heat. ¾ Place the Router in a location where it can be connected to the various dev ices as well a s to a power source. ¾ Make sure the cables and power cord are placed ...

  • TP-Link TD-W8900GB - page 15

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 8 3.6.2 Wired network connection Wired network connections are provided through the Line port and LAN port s which are on the back of the Router. See the Back Panel picture above and the illustrations below for examples. 3.6.2.1. Connect ADSL Line Use the ADSL cable included with the Router to connec ...

  • TP-Link TD-W8900GB - page 16

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 9 Figure 4-1 ) Note: Do not mix up the user name and password with your ADSL account user name and password which needed for PPP connections. 2. The default screen shows as below. Change the VPI or VCI values which are used to define a unique path for your c onnection. If you have been given speci fi ...

  • TP-Link TD-W8900GB - page 17

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 10 3. On the Connection Type screen, you can select a connec tion type (PPPoA, PPPoE, MER, IPoA or Bridging), which is provided by your ISP. We select PPPoE mode (For example), and then click “Next “to continue. Figure 4-3 4. Enter the PPP Username and PPP Pass word provided by your I SP. If PPPo ...

  • TP-Link TD-W8900GB - page 18

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 11 5. Use the default setting of this screen click “Next” to continue. Figure 4-5 6. Use the default IP Address 192.168.1.1 and Subnet Mask 255.255.255.0. Us e the default setting of “ Enable DHCP Server ”, and click “Next” to continue. Figure 4-6 7. Use the default setting “ Enable Wir ...

  • TP-Link TD-W8900GB - page 19

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 12 Figure 4-7 8. You will see the WAN Setup-Summary screen below, click " Save/Reboot " to save these settings and reboot the Router. Figure 4-8 ) Note: The reboot process will take a wh ile to complete, please wait befo re reopening your web browser. 4.2 Configure PC Your PC needs a networ ...

  • TP-Link TD-W8900GB - page 20

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 13 may connect your adapter to a Hub/Switch, and then connect the Hub/Switch to the Router. Follow the instructions below to configure a computer running Windows XP to be a DHCP client. 1. From the Start menu on your desktop, go to Settings , and then click on Network Connections. Figure 4-9 2. In th ...

  • TP-Link TD-W8900GB - page 21

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 14 Figure 4-10 3. In the General tab of Internet Protocol (TCP/IP) Properties menu, highlight Internet Protocol (TCP/IP) under “This c onnection uses the following item s:” by clicking on it once. Click on the Properties button. Figure 4-11 4. Select “Obtain an IP address automatically ” by c ...

  • TP-Link TD-W8900GB - page 22

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 15 Figure 4-12 ¾ Configure the IP address manually Open TCP/IP Properties of the LAN card in your PC, enter the IP address as 192.168.1.* (* is any value between 2 to 254, Subnet mask is 255.255.255.0, Gateway is 192.16 8.1.1, DNS address is the value provided by ISP). ¾ Now, you can run the Ping c ...

  • TP-Link TD-W8900GB - page 23

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 16 Figure 4-13 If the result displayed is similar to that shown in figure below, it means that your PC has not connected to the Router. Figure 4-14 Please check it fo llowing these steps: 1. If the connection between your PC and the Router is correct? ) Note: The 1/2/3/4 LEDs of LAN port which you li ...

  • TP-Link TD-W8900GB - page 24

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 17 5.1 Login After your successful login, y ou will see the Login screen (shown in Figure 5-1). Figure 5-1 There are six main menus shown on the screen, they are Device Info , Quick Setup , Advanced Setup , Wireless , Diagnostics and Management . Additional menus will b e available after you click on ...

  • TP-Link TD-W8900GB - page 25

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 18 Figure 5-2 ) Note: Click the other submenus under the main menu Device Info , you will be able to view the corresponding information about WAN , Statistics , Route , ARP and DHCP . 5.3 Quick Setup Please refer to the Chapter 4 to get the detailed information. 5.4 Advanced Setup Choose “ Advanced ...

  • TP-Link TD-W8900GB - page 26

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 19 Figure 5-3 ¾ W AN Port Information T able: This table describes the W AN port settings and the relevant manipulation to each interface. ¾ Remove: Select the check box in the table (shown in Figure 5-3) and then click the Remove tab, the corresponding interfac e will be deleted in the table. ¾ A ...

  • TP-Link TD-W8900GB - page 27

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 20 Figure 5-4 1. Follow the instructions below to configure the A TM PVC on the screen (shown in Figure 5-4). Make sure you have the necessary in formation before yo u configure it. 1) Enter the VPI and VCI values provided by your ISP, they should not be changed unless you have been instructed to cha ...

  • TP-Link TD-W8900GB - page 28

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 21 service, the Quality of Serv ice menu will be added to the W eb-based Utility, the detailed configuration will be described in 5.4.5 Quality of Service . 2. Select the Connection T ype in the next screen (shown in Figure 5-5). Figure 5-5 1) Select the Connection Type and Encapsulation Mode your IS ...

  • TP-Link TD-W8900GB - page 29

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 22 1. PPPoA If you choose connection type PPPoA on the screen above (shown in Figure 5-5), you will see the screen below (shown in Figure 5-6). Follow the instru ctions to configure the WA N Interface. Figure 5-6 1) Enter the PPP Username and PPP Password provided by you r ISP exactly, select the Aut ...

  • TP-Link TD-W8900GB - page 30

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 23 Figure 5-7 5) Enable the IGMP Multicast and WAN Service on the screen above, if you are not sure about the IGMP, just leave the default setting. Note that if you want to adopt the PPPoA service, you have to select the Enable WAN Service option in the screen above, or else the service will not take ...

  • TP-Link TD-W8900GB - page 31

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 24 The information is same as the information in Figure 5-3. 2. PPPoE If you choose PPPoE in the previous screen (shown in Figure 5-5), the configuration is similar to PPP oA , the only difference is that you should set the PPPoE Service Name on the corresponding screen. You can refer to Chapter 4 to ...

  • TP-Link TD-W8900GB - page 32

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 25 the following IP Address , and then enter the WAN IP Address and WAN Subnet Mask . 2) Configure the default gateway . If you are provided a dynamic gateway address, please select obtain default gateway automatically , and then the Router will automatically get gateway parameters from your ISP. If ...

  • TP-Link TD-W8900GB - page 33

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 26 the screen above, or else the service will not take effect. ¾ service name: You can enter the service name in the text box o r leave the default name. ) Note: If you select the NAT and Security check box on the screen (shown in Figure 5-10), the NAT a nd Security menu will be added to the Web- ba ...

  • TP-Link TD-W8900GB - page 34

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 27 Figure 5-12 1) If you want to adopt the Bridge service, you have to select the Enable Bridge Service option in the screen above, or else the service will not take effect. 2) Enter the service name in this screen, otherwise leave the default setting. 3) Click the Next button, and you will s ee the ...

  • TP-Link TD-W8900GB - page 35

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 28 5.4.2 LAN Choose “ Advanced Setup ” Æ “ LAN ”, and you will see the LAN screen (shown in Figure 5-14 ) ， the section allows you to configure the Router’s LAN ports settings. Figure 5-14 ¾ IP Address: Y ou can configure the Router ’s IP Ad dress and Subnet Mask for LAN Interface. ? ...

  • TP-Link TD-W8900GB - page 36

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 29 ¾ DHCP Server: These settings allow you to confi gure the Router‘s Dynamic Host Configuration Protocol (DHCP) server function. The DHCP serv er is enabled by default for the Router ’s Ethernet LAN interf ace. DHCP service will supply IP settings to computers which are configured to automatica ...

  • TP-Link TD-W8900GB - page 37

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 30 3. Type the MAC Address(00:13:8F:A9:E6:CA for in stance) of the computer which you want to reserve an IP(192.168.1.100 for instance) for in the MAC Address text box; 4. Type the IP Address(192.168.1.100 for instance) you have reserve d in the Reserved IP Address text box; 5. Click save botton to s ...

  • TP-Link TD-W8900GB - page 38

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 31 Figure 5-15 Choose “ Advanced Setup ” Æ “ NAT ”, there are four submenus under the main men u : Virtual Servers , Port Triggering , DMZ Host and ALG . Click any of them, and you will be able to configure the corre sponding function. 5.4.3.1. Virtual Servers Choose “ Ad vanced Setup ” ...

  • TP-Link TD-W8900GB - page 39

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 32 ¾ Virtual Server T able: The t able indicates the informati on about the Virtual Server entries.  Server Name: This is the name of the Virtual Server . It is ex clusive and must be filled in.  External Port St art: The base number of External Ports. Y ou can type a service port or leave it ...

  • TP-Link TD-W8900GB - page 40

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 33 Figure 5-17 2. Select the service which you want to use from the drop-down lis t. If the list does not have the service you need, type the name of the custom service in the text box. 3. Type the IP Address of the computer in the Server IP Address text box. 4. Enter the External Port Start, Externa ...

  • TP-Link TD-W8900GB - page 41

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 34 only need to enter the Server IP Address for the Virtual Server. 5.4.3.2. Port Triggering Choose “ Ad vanced Setup ” Æ “ NAT ” Æ “ Port Triggering ”, you can set Port Triggering on the screen (shown in Figure 5-18). Some applications requir e that specific ports in the Router's ...

  • TP-Link TD-W8900GB - page 42

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 35 1. Click the Add button (pop-up Figure 5-18), and then you will se t the new Port Triggering in the next screen (shown in Figure 5-19). Figure 5-19 2. Select the application from the drop-down list. If the list does not have the application that you want, select the Custom application radio-button ...

  • TP-Link TD-W8900GB - page 43

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 36 Figure 5-20 To add a new DMZ Host : You can enter the computer 's IP address and then click Save/Apply to activate the DMZ host you set on this page. ) Note: DMZ host forwards all the ports at the same ti me. Any PC whose port is being forwarded must have its DHCP client function di sabled an ...

  • TP-Link TD-W8900GB - page 44

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 37 Figure 5-22 5.4.4.1. IP Filtering The IP address filtering feature makes it possible fo r administrators to contro l user's access to the Internet, which is based on user's IP . The IP address filtering includes Outgoing and Incoming , the detailed descriptions are provided below. IP Fil ...

  • TP-Link TD-W8900GB - page 45

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 38 Figure 5-24 2. Enter the Filter name for the rule, it is excl usive and must be filled. 3. Select the protocol: TCP/UDP , TCP , UDP or ICMP in the drop-down list for the connection between the Source IP address and Destination IP address. 4. Enter a Source IP Address in dotted-decimal notati on fo ...

  • TP-Link TD-W8900GB - page 46

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 39 Figure 5-25 Setup an Incoming IP Filtering rule: 1. Click the Add button (pop-up Figure 5-25), and t hen you will set the new rule in the next screen (shown in Figure 5-26). Figure 5-26 2. Enter the Filter name for the rule, it is excl usive and must be filled in. 3. Select Protocol in the drop-do ...

  • TP-Link TD-W8900GB - page 47

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 40 ) Note: When you add a Incoming IP Filtering entry, you must configure at leas t one condition on the screen above except the Filter name. If you leave Protocol blank, it means that the rule is effective to all protocols, if you leave the Sour ce IP address and/or Destination IP address blank, it ...

  • TP-Link TD-W8900GB - page 48

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 41 1. Click the Add button (pop-up Figure 5-27), then you will set th e new rule in the next screen (shown in Figure 5-28). Figure 5-28 2. Select Protocol Type in the drop-down list for the rule. 3. Enter Destination MAC Address and Source MAC Address in the text box. 4. Select Frame Direction in the ...

  • TP-Link TD-W8900GB - page 49

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 42 Figure 5-29 To setup a Parental Control rule: 1. Click the Add button (pop-up Figure 5-29), and t hen you will set the new rule in the next screen (shown in Figure 5-30). Figure 5-30 2. Enter the User Name of the LAN device c onnected to the Router. 3. To restrict the device where t he browser is ...

  • TP-Link TD-W8900GB - page 50

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 43 Figure 5-31 Click the Add button, and you can configure t he QoS on the next screen (shown in Figure 5-32). ...

  • TP-Link TD-W8900GB - page 51

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 44 Figure 5-32 After you specify the condition, click the Save/Apply button to save the entry. ) Note: A rule must be consisting of a class name and at least one condition abo ve. All of the specified conditions in this classificati on rule must be satisfied with the rule to take effect. 5.4.6 Routin ...

  • TP-Link TD-W8900GB - page 52

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 45 Figure 5-33 5.4.6.1. Default Gateway Choose “ Ad vanced Setup ” Æ “ Routing ” Æ “ Defau lt Gatewa y ”, you can see the Default Gateway screen, this screen allows you to configure the default gateway (shown in Figure 5- 34). Figure 5-34 If the Enable automatic Assigned Default Gatew a ...

  • TP-Link TD-W8900GB - page 53

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 46 enabled PVC(s). If the check-box is not selected, enter the static Default Gateway IP and/or a WAN Interface , you can leave the WAN Interface default. Then click Save/Appl y butt on to save it. ) Note: If changing the Automatic Assigned Default Gateway from unselected to selected, you have to reb ...

  • TP-Link TD-W8900GB - page 54

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 47 2. Enter the following data: ¾ Destination Network Address: The Destination Network Address is the address of the network or host that you want to assign to a static route. ¾ Subnet Mask: The Subnet Mask determines whi ch portion of an IP Addre ss is the network portion, and which portion is the ...

  • TP-Link TD-W8900GB - page 55

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 48 5.4.7 DNS When you select the connection type PPPoE, PPPoA , MER or IPoA for WAN configuration, you will see the DNS menu in the Web-based Utility (shown in Figure 5-38). It includes DNS Serve r and Dynamic DNS submenus. Figure 5-38 5.4.7.1. DNS Server Choose “ Advanced Set up ” Æ “ DNS ” ...

  • TP-Link TD-W8900GB - page 56

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 49 ) Note: You have to reboot the Router to make the new configuration take effect. 5.4.7.2. Dynamic DNS Choose “ Ad vanced Setup ” Æ “ DNS ” Æ “ Dynamic DNS ”, you can see the D ynamic DNS screen, this screen allows you to confi gure the Dynamic DNS (shown in Figure 5-40). The Ro uter ...

  • TP-Link TD-W8900GB - page 57

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 50 Figure 5-41 ) Note: This page allows you to add a Dynamic DNS address from DynDNS.org,TZO or No-IP . 2. Select D-DNS provider (DynDNS.org,TZO or No-IP) in the drop-down list. 3. Enter the Hostname of the DNS Server, and select the corresponding Interface for the DDNS, you can leave it default. 4. ...

  • TP-Link TD-W8900GB - page 58

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 51 Figure 5-42 You can select the modulation type, phone line pair and the capabilit y of Bitswap or SRA. After you set them up, click the Save/Apply button to save the configurations. 5.4.9 Port Mapping Choose “ Advanced Setup ” Æ “ Port Mapping ”, you can see the Port Mapping screen, this ...

  • TP-Link TD-W8900GB - page 59

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 52 Figure 5-43 Click the Add/Edit button, and then you can configure the Port Mapping in the next screen (shown in Figure 5-44). After you confi gure the settings, click the Save/Appl y button to save it. ...

  • TP-Link TD-W8900GB - page 60

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 53 Figure 5-44 ...

  • TP-Link TD-W8900GB - page 61

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 54 5.5 Wireless LAN Configuration The menus used to configure Wirele ss LAN settings available in t he Wireless directory including Basic, Security, MAC Filter, Ad vanced, and Statistics menus. The Wireless Basic, Security, MAC Filter, Advanced, and Statis tics are described below. 5.5.1 Wireless – ...

  • TP-Link TD-W8900GB - page 62

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 55 ¾ Region: Restrict the channel set and transmit power. Click " Apply " to configure the basic wireless options. 5.5.2 Wireless – Security Choose “ Wireless ” Æ ” Security ”, you will see the screen of Wireless-Security settings shown as below. Figure 5-46 This page allows you ...

  • TP-Link TD-W8900GB - page 63

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 56 Figure 5-47 ¾ Encryption strength: Select the appropriate level of enc ryption, 64-bit, 128-bit or 152-bit. ¾ Current Netw ork Key: To indicate which WEP key to use, select a transmission key number. ¾ Network Key 1-4: If you want to manually enter the WEP keys, then enter them in the network K ...

  • TP-Link TD-W8900GB - page 64

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 57 3. In Network key 1 list, enter 5 ASCII c haracters or 10 hexadecim al digits for 64-bit encryption keys, enter 13 ASCII characte rs or 26 hexadecimal digits for 128-bit encryption keys, enter 16 ASCII characte rs or 32 hexadecimal digits for 152-bit encryption keys. 4. Click the Save/Apply button ...

  • TP-Link TD-W8900GB - page 65

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 58 Figure 5-49 ¾ WPA Group ReKey Interval: Enter the Key Renewal period, wh ich tells the Router how often it should change encryption keys. ¾ RADIUS Server IP Address: The IP address of the RADIUS server. ¾ RADIUS Port: The port of the RADIUS server. The default number is 1812. ¾ RADIUS key: The ...

  • TP-Link TD-W8900GB - page 66

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 59 Figure 5-50 5.5.2.3. WPA-PSK WPA-PSK requires a shared key and does not use a separate server for aut hentication. PSK keys can be ASCII or Hex type. Figure 5-51 ¾ WPA Pre-Shared Key: Enter the key shared by the Router and your other network devices. It must have 8-63 ASCII characters or 64 Hexad ...

  • TP-Link TD-W8900GB - page 67

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 60 ASCII or Hex type. 3. Change the Group Ke y Interval as desired or use the default setting. 4. Click the Save/Apply button to save the new configuration. Figure 5-52 ) Note: If you click the option “ Click here to display ”, the Figure 5-53 will pop-up, and it shows the password yo u have set. ...

  • TP-Link TD-W8900GB - page 68

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 61 Figure 5-54 5.5.2.5. WPA2-PSK To configure WPA2-PSK settings, select the WPA2-PSK option from the drop-down list. The menu will change to offer the appropriate settings . WPA2-PSK requires a shared key and does not use a separate server for authentication. PSK keys can be ASCII or Hex type. Figure ...

  • TP-Link TD-W8900GB - page 69

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 62 Figure 5-56 5.5.2.7. Mixed WPA2/WPA-PSK To configure Mixed WPA2/WPA-PSK settings, select the Mixed WPA2/WPA-PSK option from the drop-down list. The menu will change to offer the appropriate settings. The steps of this setting are the same with WPA-PSK. Figure 5-57 5.5.3 Wireless -- MAC Filter Choo ...

  • TP-Link TD-W8900GB - page 70

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 63 Figure 5-58 Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network’s RADIUS. To filter wire less users by MAC Address, either permitting or blocking access. If you do not wish to filter users by MAC Address, select Disabled. ¾ Allow: ...

  • TP-Link TD-W8900GB - page 71

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 64 Figure 5-60 ¾ Channel: Select the channel you want to use from the drop-dow n List of Channel. This field determines which operating frequen cy will be used. It is not necessary to change the wireless channel unless you notice interferenc e problems with another nearby access point. ¾ Fragmentat ...

  • TP-Link TD-W8900GB - page 72

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 65 the Router. 5.5.5 Wireless – Statistics Choose “ Wireless ” Æ ” Statistics ”, you will see the screen of Wireless-Statistics setting shown as below. Figure 5-61 This page shows authenticated wirele ss stations and their status. ¾ BSSID: Displays the connected wire less station's M ...

  • TP-Link TD-W8900GB - page 73

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 66 5.7 Management Choose “ Management ”, there are six submenus under the main menu. They are Settings , System Log , TR-069 client , Internet Time , Access Control , Update Software and Reboot . Click any of them, and you will be able to configure the corre sponding function. 5.7.1 Settings This ...

  • TP-Link TD-W8900GB - page 74

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 67 Figure 5-65 2. Click the Save button, and save the file as the appointed file (shown in Figure 5-66). Figure 5-66 5.7.1.2. Update Choose “ Management ” Æ “ Settings ” Æ “ Update ”, you can see the Update screen, this screen (shown in Figure 5-67) allows you to update the Ro uter’s ...

  • TP-Link TD-W8900GB - page 75

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 68 Figure 5-67 To update the Router’s settings: 1. Click the Brow se button to locate the update file for the device, and you can also enter the exact path to the Setting file in the text box. 2. After you have selected the file for updating the settings, click the Update S ettings button. ) Note: ...

  • TP-Link TD-W8900GB - page 76

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 69 Figure 5-69 T o View the System Log: Click the Vie w System Log button, you will see the screen (shown in Figure 5-70) which displays the Route r ’s recent logs. Figure 5-70 ¾ Refresh: Click the button, the informati on in the table will be updated. ¾ Close: Click the button, the screen will b ...

  • TP-Link TD-W8900GB - page 77

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 70 Figure 5-71 ¾ Disable/Enable: Select the Enable to log the events, if you don’t want to log these event s, please select Disable . ¾ Log Level: Select the Log level in the drop-down list, for the Log level, all events above or equal to the selected level will be logged. ¾ Display Level: Selec ...

  • TP-Link TD-W8900GB - page 78

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 71 Figure 5-72 To set the Router’s time: 1. Select automatically synchronize with Internet time servers. 2. Select the First NTP time server and/or t he Second NTP time server in the drop-down list severally. 3. Select your local time zone. 4. Click Save/Apply button. ) Note: a) This setting will b ...

  • TP-Link TD-W8900GB - page 79

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 72 Figure 5-73 ¾ Inform: You can select the checkbox to disable or enable the Inform Interval. ¾ Inform Interval: Type the interval time of your Router contact with the ACS . ¾ ACS URL: Please accept this information from your ISP. And through ACS (Auto-Configuration Server) you can perform auto-c ...

  • TP-Link TD-W8900GB - page 80

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 73 5.7.5 Access Control This section provides three submenus including Services , Addresses and Passw ord (shown i n Figure 5-74), the detailed descriptions are provided below. Figure 5-74 5.7.5.1. Services Choose “ Management ” Æ “ Ac cess Control ” Æ “ Services ”, you can see the Serv ...

  • TP-Link TD-W8900GB - page 81

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 74 screen, this screen (shown in Figure 5-76) allows you to conf igure the IP Address for managing the Router. Figure 5-76 To add the IP Address: 1. Click the Add button. You can add a new IP Address in the next screen (shown in Figure 5-77 ). Figure 5-77 2. Enter the IP address of the management sta ...

  • TP-Link TD-W8900GB - page 82

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 75 Figure 5-78) which allows you to change t he factory default password of the Router. Figure 5-78 To change the password: 1. Enter the Old Password in the text box. 2. Enter the Ne w Pas s wo rd and Confirm Pass w ord . The Confirm Password should be the same as the New Password. 3. Click the Save/ ...

  • TP-Link TD-W8900GB - page 83

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 76 ¾ Up date Sof tware: After you have selected the latest sof t ware, click the button. To update the Router's software: 1. Downl oad the latest software upgrade file from the TP-LINK website ( www.tp-link.com). 2. C lick Brow se to view the folders and select the image file or enter the exact ...

  • TP-Link TD-W8900GB - page 84

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 77 Chapter 6. Appendix Appendix A: Glossary Access Point - A device that allows wireless-equipped computers and other devices to communicate with a wired network. Also us ed to expand the range of a wireless network. Ad-hoc Netw ork - An ad-hoc network is a group of co mputers, each with a wireless a ...

  • TP-Link TD-W8900GB - page 85

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 78 Ethernet - IEEE standard network protocol that specifies how data is placed on and retrieved from a common transmission medium. Firewall - A set of related programs located at a net work gateway server that protects the resources of a network from users from other networks. Gateway - A device that ...

  • TP-Link TD-W8900GB - page 86

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 79 adapters. PPPoE ( P oint to P oint P rotocol o ver E thernet) - PPPoE stands for Point to Point protocol over Ethernet, this protocol is used as a type of broadband connection that provides authentication (username and password) in addition to data transport. PPPoA (P oint to P oint P rotocol over ...

  • TP-Link TD-W8900GB - page 87

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 80 VLAN ID (0-4095) - Indicates the ID number of the VLAN being configured. Up to 256 VLANs can be created. WAN ( W ide A rea N etwork) - Networks that cover a large geographical area. Web-based Utility - The web page that allows you to manage the Router. WEP (W ired E quivalent P rivacy ) - A data p ...

  • TP-Link TD-W8900GB - page 88

    TD-W8900GB 54M Wireless ADSL2+ Router User Guide 81 Appendix B: S pecifications Supporting Standards and Protocols ANSI T1.413, ITU G.992.1, IT U G.992.2, ITU G.992.3, ITU G.992.5, IEEE 802.11b , IEEE 802.11g , IEEE 802.3, IEEE 802.3u, TCP/IP, IPoA , PPPoA , PPPoE, SNTP, HTTP, DHCP, ICMP, N AT LAN Ports 4 10/100M Auto-Negotiation RJ45 ports （ Aut ...

Manufacturer TP-Link Category Network Router

Documents that we receive from a manufacturer of a TP-Link TD-W8900GB can be divided into several groups. They are, among others:
- TP-Link technical drawings
- TD-W8900GB manuals
- TP-Link product data sheets
- information booklets
- or energy labels TP-Link TD-W8900GB
All of them are important, but the most important information from the point of view of use of the device are in the user manual TP-Link TD-W8900GB.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals TP-Link TD-W8900GB, service manual, brief instructions and user manuals TP-Link TD-W8900GB. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product TP-Link TD-W8900GB.

Similar manuals

A complete manual for the device TP-Link TD-W8900GB, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use TP-Link TD-W8900GB by users. Manuals are usually written by a technical writer, but in a language understandable to all users of TP-Link TD-W8900GB.

A complete TP-Link manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual TP-Link TD-W8900GB - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the TP-Link TD-W8900GB, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the TP-Link TD-W8900GB, that we can find in the current document
3. Tips how to use the basic functions of the device TP-Link TD-W8900GB - which should help us in our first steps of using TP-Link TD-W8900GB
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with TP-Link TD-W8900GB
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of TP-Link TD-W8900GB in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning TP-Link TD-W8900GB?

Use the form below

If you did not solve your problem by using a manual TP-Link TD-W8900GB, ask a question using the form below. If a user had a similar problem with TP-Link TD-W8900GB it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)