English dropdown-ico

Manual Scotts S1642, S1742, S2046

72 pages 5.92 mb
Download

Go to site of 72

Summary
  • Scotts S1642, S1742, S2046 - page 1

    OMGX10784 C0 C0 Scotts Lawn T ractor s S1642, S1742, and S2046 OPERA T OR’S MANU AL North Ameri can V ersion Litho in U.S.A. ...

  • Scotts S1642, S1742, S2046 - page 2

    Introduction INTR ODUCTION Introduction THANK Y OU for pur c hasing a Scotts pr oduct. Read this manual and your attachment man ual thoroughly . F ailure to do so could result in personal injury or equipment damage. This manual should be considered a permanent par t of your machine and should remain with the machine when you sell it. Product warran ...

  • Scotts S1642, S1742, S2046 - page 3

    Product Identification PR ODUCT IDENTIFICATION Product Identification Recor d Identification Number s Scott ’ s Lawn T ractors S1642, S1742, and S2046 PIN (020001 - ) If you need to contact an A uthor ized Service Center for inf ormation on ser vicing, alwa ys provide the product model and serial number . Y ou will need to locate the identificati ...

  • Scotts S1642, S1742, S2046 - page 4

    Assembly - 0 ASSEMBL Y Assembly Identify P ar ts Connect and Chec k Battery NO TE: Do not remove the BLA CK negative ( – ) protective cap at this time. 1. Remov e and discard the RED positive (+) protectiv e cap from the positive (+) battery ter minal. 2. Connect RED positive (+) cab l e (A) to battery with 6mm he x head bolt and 6 mm flange nut. ...

  • Scotts S1642, S1742, S2046 - page 5

    Assembly - 1 ASSEMBL Y Checki ng Tire Pressure 1. Check tires f or damage. 2. Check tire pressure with an accur ate gauge. 3. Add or remov e air , if necessar y: c CA UTION: A void injury! Explosive separation of a tire and rim parts can cause serious injur y or death: - Do not attempt to mount a tire witho ut the proper equipment and exp erience t ...

  • Scotts S1642, S1742, S2046 - page 6

    Saf ety Signs - 2 SAFETY SIGNS Safety Signs Safety-Alert Symbol Read and recognize saf ety information. Be aler t to the potential f or personal injur y when you see this saf ety-aler t symbol. On your machine saf ety labels, the words D ANGER, W ARNING, and CA UTION are used with this safety-alert symbol. D ANGER identifies the most ser ious hazar ...

  • Scotts S1642, S1742, S2046 - page 7

    Saf ety Signs - 3 SAFETY SIGNS MO WER WHEN ENGINE IS R UNNING THRO WN OBJECTS BEFORE MO WING, CLEAR AREA OF OBJECTS THA T MA Y BE THRO WN BY BLADE DO NO T OPERA TE MO WER WITHO UT DISCHARGE CHUTE OR ENTIRE GRASS CA TCHER IN PLACE Picture Note: Located on Right-Hand side of deck DA N G E R RO T A TING BLADE DO NO T PUT HAND S OR FEET UNDER OR INTO M ...

  • Scotts S1642, S1742, S2046 - page 8

    Controls - 4 CONTR O LS Controls T ractor Contr ols - Gear A - Throttle/Choke Contr ol B - Foot P edal - Brake/Clutch C - Reverse Implement Option Switc h D - Attachment Lift Le ver E - Loc king Lever F - T ransmission Shift Lever G - P ark Brake H - PT O Drive Lever I - Ignition Switch T ractor Controls - A utomatic A - Choke Knob (S2046) B - Thro ...

  • Scotts S1642, S1742, S2046 - page 9

    Operating Machine - 5 OPERATING MACHINE Operatin g M a chine Operate Safely • In addition to reading your Operator ’ s Manual, vie w y our Mowing Saf ety Video . • Check br ak e action bef ore you oper ate. Adjust or ser vice brakes as necessary . • Inspect machine bef ore you oper ate. Be sure hardware is tight. Repair or replace damaged, ...

  • Scotts S1642, S1742, S2046 - page 10

    Operating Machine - 6 OPERATING MACHINE A v oid Tipping • DO NO T dr ive where machine could slip or tip . • Sta y aler t for holes and other hidden hazards in the terrain. • K eep awa y from drop-offs. • Slow do wn bef ore you make a sharp tur n or operate on a slope. • When pulling loads or using heavy equipment, use only approv ed hitc ...

  • Scotts S1642, S1742, S2046 - page 11

    Operating Machine - 7 OPERATING MACHINE Picture Note: Model with capscrew adjuster used for illustration. 2. Loosen two cap scre ws (A) two turns. 3. Slide f orward or rearw ard on mounting bracket to desired position. 4. Tighten cap screws or knobs . 5. Lower seat. Using Slide Adjuster (S2046) 1. Pivot seat f orward on its mounting brac ket. 2. Pu ...

  • Scotts S1642, S1742, S2046 - page 12

    Operating Machine - 8 OPERATING MACHINE 1. Gear units - Mov e transmission shift lev er (A) to N (NEUTRAL) position. A utomatic un its - If equipped with shift lev er , move shift le v er to N (NEUTRAL) position. If equipped with f oot pedal controls, do not depress either pedal. 2. Lock the park brak e (B). 3. Pull PT O lev er (C) all the wa y bac ...

  • Scotts S1642, S1742, S2046 - page 13

    Operating Machine - 9 OPERATING MACHINE Stopping Engine 1. Push down on f oot pedal (A). 2. Gear units - Mov e transmission shift lev er (B) to N (NEUTRAL) position. A utomatic un its - If equipped with shift lev er , move shift le v er to N (NEUTRAL) position. If equipped with f oot pedal controls, release either pedal and unit will automatically ...

  • Scotts S1642, S1742, S2046 - page 14

    Operating Machine - 10 OPERATING MACHINE T o T ravel Forwar d: 1. Units with Shift Lever (A) - Mo ve transmission shift le ver (A) to the right and forw ard. The speed of the tractor is determined by how f ar forw ard the shift lev er is mov ed. Units with Foot Controls (B) - Depress f orw ard pedal (B). The speed of the tractor is determined by ho ...

  • Scotts S1642, S1742, S2046 - page 15

    Operating Machine - 11 OPERATING MACHINE ENGA GE CRUISE CONTROL: 1. Star t with the cr uise control lev er (A) in the OFF position. 2. Mov e cruise co ntrol lev er forw ard, at the ” t ” position the tractor will begin to mov e forw ard. 3. Continue to mo ve cruise control lev er f orward toward the “ r ” position and the tractor will incre ...

  • Scotts S1642, S1742, S2046 - page 16

    Operating Machine - 12 OPERATING MACHINE Pushing Machine T o mov e machine when engine is STOPPED: • Unlock the park brak e (A). • GEAR MODEL: Put transmission shift le ver (B) in N (Neutral). • A UT OMA TIC MODEL: Pull out on free-wheeling lev er (C). • Push machine to desired location. NO TE: A UTOMA TIC MODEL: Push free-wheeling lever (C ...

  • Scotts S1642, S1742, S2046 - page 17

    Operating Machine - 13 OPERATING MACHINE T est 2 1. Operator on seat. 2. Lock the park brak e. 3. Push PT O lev er (A) forward to ENGA GE. 4. T r y to star t engine. 5. Engine MUST NO T star t. If engine star ts, there is a problem with y our safety interlock circuit. (See y our A uthor ized Ser vice Center .) T est 3 1. Operator on seat. 2. Lock t ...

  • Scotts S1642, S1742, S2046 - page 18

    Operating Machine - 14 OPERATING MACHINE 3. Pull PT O le ver (A) back to DISENGAGE. 4. Star t engine and move throttle le ver (B) to F AST ( r ) speed position. 5. Raise up off of seat. DO NO T get off tractor . 6. Engine MUST remain running. If engine does stop, there is a problem with y our safety interloc k circuit. (See your A uthorized Ser vic ...

  • Scotts S1642, S1742, S2046 - page 19

    Operating Machine - 15 OPERATING MACHINE 2. Push PT O lev er (A) forward to ENGA GE. 3. Look behind the vehicle to be sure there are no bystanders . 4. Begin REVERSE tra v el by moving the drive le ver or re verse pedal f or Automatic Model or gear shift le ver f or Gear Model to R (REVERSE) position. Mower and engine should stop oper ation. If mow ...

  • Scotts S1642, S1742, S2046 - page 20

    Operating Mow er - 16 OPERATING MOWER Operatin g M o wer Operate Mower Safel y • In addition to reading your Operator ’ s Manual, vie w y our Mowing Saf ety Video . Check Gr ound Conditions • Clear mowing area of objects that might be thro wn. K eep people and pets out of mowing area. • Study mowing area. Set up safe mo wing pattern. Do not ...

  • Scotts S1642, S1742, S2046 - page 21

    Operating Mow er - 17 OPERATING MOWER 4. Adjust gage wheels to match cut height desired. (See Adjusting Mower Gage Wheels belo w .) Adjusting Mower Ga ge Wheels 1. Check tr actor tire pressure. Inflate tires to the correct pressure. (See Chec king Tire Pressure in Ser vice - Miscellaneous section.) 2. Raise mower lift le ver to TRANSPOR T (upper) p ...

  • Scotts S1642, S1742, S2046 - page 22

    Operating Mow er - 18 OPERATING MOWER 7. Loosen top clamping nut (C) f acing inside of mower , on left hand side J-bolt (B), approximately one turn. 8. Loosen upper adjusting nut (D). 9. Raise or lower left side of dec k. • T o raise: T ur n lower adjusting n ut (E) tow ards rear of tractor . • T o lower: T ur n lower adjusting nut (E) towards ...

  • Scotts S1642, S1742, S2046 - page 23

    Operating Mow er - 19 OPERATING MOWER 2. Mov e throttle lev er (A) to the F AST ( r ) position. 3. Lower mo wer to cutting height. 4. Push PT O dr ive le ver (B) f orward to ENGA GE mower blades . NO TE: The engine and mower will stop as the drive lever is mo ved rearward (A utomatic Model) or the g ear shift lever is mo ved to the R (REVERSE) posi ...

  • Scotts S1642, S1742, S2046 - page 24

    Operating Mow er - 20 OPERATING MOWER T o set-up and operate the 42 ” dec k f or side discharg e operation the f actor y in stalled mulch cov er (A) must be remov ed. 1. Remov e mulch cov er : • Lift plastic discharge chute. • Grasp corner of steel chut e, pull outw ard to unlock and pivot up . • Unhook both rubber hooks (B) and remov e mul ...

  • Scotts S1642, S1742, S2046 - page 25

    Operating Mow er - 21 OPERATING MOWER (A) must be remo v ed. 1. Remov e mulch cov er : • Lift plastic discharge chute. • Grasp corner of steel chut e, pull outw ard to unlock and pivot up . • Unhook both rubber hooks (B) and remov e mulch cov er . 2. Store mulch co v er in a well protected area and ha v e it readily av ailable f or when you w ...

  • Scotts S1642, S1742, S2046 - page 26

    Replacement P ar ts - 22 REPLACEMENT P AR TS Replacem ent Part s Service Literature If you w ould lik e a cop y of the Parts Catalog or T echnical Manual f or this machine call: • U. S . & C a n ad a : 1-800-522-7448. • All Other Regions : Y our John Deere dealer . John Deere Quality W e recommend John Deere quality par ts and lubricants, a ...

  • Scotts S1642, S1742, S2046 - page 27

    Replacement P ar ts - 23 REPLACEMENT P AR TS P ar ts for 42-Inch Mo wer Deck P ar ts for 46-Inch Mo wer Deck (P ar t numbers are subject to change without notice . Part Numbers ma y be diff eren t outside the U .S.A.) Item P art Number Blades: Standard Bagger Mulch M139802 or M139803 M139803 M139802 Mow er Dr ive Belts M124895 Le veling Gauge TY152 ...

  • Scotts S1642, S1742, S2046 - page 28

    Ser vice Machine Safely - 24 SERVICE MACHINE SAF EL Y Service Machine Safely Practice Safe Maintenance • Understand ser vice procedure bef ore doing work. K eep area clean and dr y . • Ne v er lubr icate, ser vice, or adjust machine while it is moving. K eep saf ety de vices in place and in working condition. K eep hardware tight. • T o pre v ...

  • Scotts S1642, S1742, S2046 - page 29

    Ser vice Inter val Char t - 25 SERVICE INTER V AL CHAR T Servi ce Interv al C hart Servi ce Int erv als Please use the f ollowing timetab les to perform routine maintenance on your machine . Ser vice procedures included in this manual b ut not on this char t are to be perf or med on a n as needed basis. IMPORT ANT: A void dama ge! If you operate mo ...

  • Scotts S1642, S1742, S2046 - page 30

    Ser vice Inter val Char t - 26 SERVICE INTER V AL CHAR T Service Record D A TE SER VICE PERFORME D ...

  • Scotts S1642, S1742, S2046 - page 31

    Ser vice Engine - 27 SERVICE ENGINE Service E ngine Engine W arranty Maintenance Statement Maintenance, repair , or replacement of the emission control de vices and systems on this engine, which are being done at the customers e xpense, ma y be performed by any non- road engine repair establishment or individual. W arranty repairs must be perf or m ...

  • Scotts S1642, S1742, S2046 - page 32

    Ser vice Engine - 28 SERVICE ENGINE 1. P ark tractor on a lev el surf ace. ST OP engine . Let engine cool. 2. Lift hood. 3. Clean area around dipstick to pre v ent debris from falling into crankcase. 4. Remov e dipstick (A). Wipe with clean cloth. 5. Install dipstick: • S1642 - Install dipstick in tube , but DO NO T tigthen it. Let dipstick threa ...

  • Scotts S1642, S1742, S2046 - page 33

    Ser vice Engine - 29 SERVICE ENGINE cloth. 8. Lightly oil filter gasket with fresh, clean oil. 9. Install replacement oil filter . T ur n oil filter to the ri ght (clockwise) until rubber gask et contacts filter adapter . Tighten filter an additional one-half turn. 10.Remov e dipstick (B) and refill with new oil of recommended grade . (See Engine O ...

  • Scotts S1642, S1742, S2046 - page 34

    Ser vice Engine - 30 SERVICE ENGINE 9. Remov e and replace filter element (C) ONL Y if damaged or v er y dir ty: • S1642 Only - Remov e r ubber tube slee ve (D1). • Remov e wing nut (D). • Carefully remov e paper element (E) from air cleaner housing. REPLA CE with NEW element. 10.Carefully remov e element (C) from air cleaner housing. Replace ...

  • Scotts S1642, S1742, S2046 - page 35

    Ser vice Engine - 31 SERVICE ENGINE onto precleaner . Squeeze precleaner to distribute oil e venly . Squ eeze out e xcess oil with a clean cloth. 7. Inspect car tr idge f or damage or e xcessiv e dir t. Replace if necessar y . 8. Carefully clean air cleaner housing. Prev ent any dir t from f alling into carb uretor . 9. Install f oam precleaner (E) ...

  • Scotts S1642, S1742, S2046 - page 36

    Ser vice Engine - 32 SERVICE ENGINE NO TE: Chang e filter when fuel is low in fuel tank. 1. P ar k tractor on a le vel surf ace. 2. ST OP engine. LOCK par k brak e. Remo v e key . Let engine COOL. 3. Lift hood. 4. Using pliers, slide hose clamps (A) a wa y from fuel filter (B). 5. Disconnect hoses from filter and remov e filter . 6. Connect hoses t ...

  • Scotts S1642, S1742, S2046 - page 37

    Ser vice Steering and Brakes - 33 SERVICE STEERING AND BRAKES Service Steeri ng and Brak es Grease Use grease based on the e xpected air temperature range during the ser vice inter v al. The f ollowing greases ma y be used: • SAE Multipur pose EP Grease with 3 to 5 percent molybdenum disulfide . • SAE Multipur pose EP Grease. • Greases meetin ...

  • Scotts S1642, S1742, S2046 - page 38

    Ser vice Steering and Brakes - 34 SERVICE STEERING AND BRAKES • Brak e disc (A) is contacting the case (B), AND/OR • Brak e lev er (C) is contacting its mounting brack et (D), top or bottom. If so , REPLACE friction pucks and brak e disc BEFORE making adjustment. (See you A uthor ized Service Center .) 3. Block the front and rear wheels , and r ...

  • Scotts S1642, S1742, S2046 - page 39

    Ser vice Steering and Brakes - 35 SERVICE STEERING AND BRAKES 4. If distance is less than or equal to 2 mm (0.08 in): • Gradually adjust jam nuts (D) until specified measurement is obtained. • Depress brak e pedal and LOCK park brake . • Measure the distance between edge of compression spring brack et and front edge of brake rod stop tabs. Ga ...

  • Scotts S1642, S1742, S2046 - page 40

    Ser vice Mower - 36 SERVICE MOWER Service M ower A v oid Injur y From Contacting Blades Mower Spindles Replacing Mo wer Dri ve Belt 1. ST OP engine, LOCK park brake , place gear shift lev er in NEUTRAL (N) position, pull PT O dr ive le ver bac k to DISENGA GE, tur n key to the OFF position, and remo ve key . 2. Remov e mower dec k. (See Removing Mo ...

  • Scotts S1642, S1742, S2046 - page 41

    Ser vice Mower - 37 SERVICE MOWER 1. P ar k tractor on a hard, le vel surf ace. 2. Stop the engine, remo ve k ey , wait f or moving par ts to stop . 3. Place mower dec k in LOWEST setting. 4. Engage PT O dr ive le ver . 5. Measure distance from brack et (A) to washer (B) on tension rod (C). Distance (D) should be: 20 – 25 mm (0.78 – 0.98 in). 6 ...

  • Scotts S1642, S1742, S2046 - page 42

    Ser vice Mower - 38 SERVICE MOWER 7. Measure distance from brake surf ace (A) to pulley braking surf ace (B). Brake to Pulle y Distance should be: 2 – 3 mm (0.08 – 0.12 in). 8. If adjustment is required, tur n nut (C) on end of brak e rod (D) in correct direction to set brake at proper distance from pulley . 9. Repeat on all brak es. 10.Install ...

  • Scotts S1642, S1742, S2046 - page 43

    Ser vice Mower - 39 SERVICE MOWER INST ALLING MOWER BLADES 1. Lightly lubricate cap screw threads with a general pur pose grease or oil. This lubrication is to prev ent rusting and seizing. 2. P osition mower b lade (D) with the cutting edge towards the ground onto the mo wer spindle. 3. Install cupped blade w asher (C) with cup side toward the bla ...

  • Scotts S1642, S1742, S2046 - page 44

    Ser vice Mower - 40 SERVICE MOWER Sharpening Blades 1. Shar pen blades with grinder , hand file or electric blade shar pener . 2. K eep or iginal bev el (A) when you grind. 3. Blade should hav e 0.40 mm (1/64 in.) cutting edge (B). Balancing Blades 1. Clean blade . 2. Put blade on nail in vise or on v er tical wall stud. T ur n blade to horizontal ...

  • Scotts S1642, S1742, S2046 - page 45

    Ser vice Electrical - 41 SERVICE ELECTRICAL Service E lectri ca l Checki ng the Battery • K eep batter y and ter minals clean . • K eep batter y bolts tight. • K eep small vent holes open. • Recharge, if necessary , at 6 – 10 amperes for 1 hour . (See Charging the Batter y in this section.) Removing and Installi ng the Battery 1. T urn ig ...

  • Scotts S1642, S1742, S2046 - page 46

    Ser vice Electrical - 42 SERVICE ELECTRICAL 2. Remov e r ubber hold-down strap (A). 3. Disconnect BLA CK ( – ) battery cable (B) first. 4. Disconnect RED (+) batter y cable (C). Remov e batter y from mower . 5. W ash battery with solution of four tablespoons of baking soda to one gallon of water . Be careful not to get the soda solution into the ...

  • Scotts S1642, S1742, S2046 - page 47

    Ser vice Electrical - 43 SERVICE ELECTRICAL 2. Connect positive (+) charger cab le to positiv e (+) batter y term inal. 3. Connect negative ( – ) charger cab le to negative ( – ) batter y ter minal. 4. Plug in charger cord. 5. Charge batter y using a 12 V o lt batter y charger at a rate of 6 – 10 amperes f or a minimum of 1 hour and no more t ...

  • Scotts S1642, S1742, S2046 - page 48

    Ser vice Electrical - 44 SERVICE ELECTRICAL 2. Push in and turn bulb sock et (A) 1/4 tur n counterclockwise to remo v e. 3. Replace def ectiv e bulb with a ne w bulb . 4. Inser t bulb soc ket into housing, push in and tur n 1/4 tur n clockwise to install. 5. Lower hood. Replacing Fuse 1. Open hood. 2. Pull def ective fuse (A) out of sock et. 3. Che ...

  • Scotts S1642, S1742, S2046 - page 49

    Ser vice Miscellaneous - 45 SERVICE MISCELLANEOUS Service M iscella neous Checki ng Tire Pressure 1. Check tires f or damage. 2. Check tire pressure with an accur ate gauge. 3. Add or remov e air , if necessar y: Fuel c CA UTION: A void injury! Explosive separation of a tire and rim parts can cause serious injur y or death: - Do not attempt to moun ...

  • Scotts S1642, S1742, S2046 - page 50

    Ser vice Miscellaneous - 46 SERVICE MISCELLANEOUS Using Clean Fuels Dir t in the fuel system is a major cause of perf ormance problems . Be su re to clean any gr ass or trash from the top of the tank bef ore removing lid. Use of a PLASTIC funnel with a plastic mesh strainer when filling the tank will prev ent most f oreign material from enter ing t ...

  • Scotts S1642, S1742, S2046 - page 51

    Ser vice Miscellaneous - 47 SERVICE MISCELLANEOUS 4. Remov e fuel tank cap (A). 5. Fill tank with fresh fuel only to bottom of filler neck. 6. Install fuel tank cap and lower hood. Care f or Plastic and P ainted Surfaces PLASTIC SURF AC ES The plastic par ts on your tractor are made of a blend of polycarbonate and polyester materials. These par ts ...

  • Scotts S1642, S1742, S2046 - page 52

    Ser vice Miscellaneous - 48 SERVICE MISCELLANEOUS 2. Use paint stick with f actor y-matched colors av ailable from your John Deere dealer to fill scr atches. F ollow directions f or use and f or dr ying. • Apply sparingly to scratch without getting on surrounding painted surf ace. Fill in scratch to le vel of surrounding painted area. • Allow t ...

  • Scotts S1642, S1742, S2046 - page 53

    Removing Mo wer - 49 REMO VING MOWER Removing Mower Removing Mo wer 1. ST OP engine, LOCK par k brake, DISENGA GE PT O le v er , tur n ke y to the OFF position, and remove k ey . 2. Raise mower lift le ver to highest position. 3. Put wood b locks under each side of mo wer . 4. Lower mo wer lift lev er to lowest position, bringing deck down onto b l ...

  • Scotts S1642, S1742, S2046 - page 54

    Removing Mo wer - 50 REMO VING MOWER 8. Remov e spr ing locking pins and rear draft pins (I), one on each side, from rear draft br ackets (J). 9. Raise mower dec k lift lev er to highest position a nd remov e wood blocks . 10.Pull deck out from under tractor . J I ...

  • Scotts S1642, S1742, S2046 - page 55

    Installing Mower - 51 INSTALLING MO WER Installing Mower Installing Mower 1. ST OP engine, LOCK par k brake, DISENGA GE PT O le v er , tur n ke y to the OFF position, and remove k ey . 2. Raise mower dec k lift lev er to the UPPER position. 3. T urn s teering wheel fully to the left. Carefully slide the mower dec k under the r ight side of the trac ...

  • Scotts S1642, S1742, S2046 - page 56

    Installing Mower - 52 INSTALLING MO WER 12.Raise tension rod (N) and attach to blade drive arm (O) using flat washer (P) and spring locking pin (Q). 13.Raise deck b y pressing the lift le ver lock and pulling the mower dec k lift lev er to its highest point. 14.Remov e wood bloc ks from under deck. 15.Check f or proper routing and position of all b ...

  • Scotts S1642, S1742, S2046 - page 57

    T roubleshooting - 53 T ROUB LESHOOTING Troubleshooting Using T roubleshooting Chart If you are e xper iencing a problem that is not listed in this char t, see your A uthorized Ser vice Center for service. When you ha ve chec ked all the possible causes listed and you are still e xperiencing the problem, see your A uthor ized Ser vice Center . Engi ...

  • Scotts S1642, S1742, S2046 - page 58

    T roubleshooting - 54 T ROUB LESHOOTING Loss of power Cutting too much grass /too f ast. Throttle in “ CHOKE ” position. Buildup of grass , leav es and trash under mo wer . Dir ty air filter . Low oil/dir ty oil. F aulty spark plug. Dir ty fuel filter . Stale or dir ty fuel. W ater in fuel. Spark plug wire loose. Dir ty engine air screen/fins. ...

  • Scotts S1642, S1742, S2046 - page 59

    T roubleshooting - 55 T ROUB LESHOOTING Mower IF CHECK Mower b lades will not rotate Obstruction in clutch mechani sm, or blades . Worn/damaged mower driv e belt. F rozen idler pulle y . F rozen blade mandrel. Discharge Chute Plugging Belt worn or installed incorrectly . Gras s too w et. Buildup of grass , leav es and trash under mo wer . Worn, ben ...

  • Scotts S1642, S1742, S2046 - page 60

    T roubleshooting - 56 T ROUB LESHOOTING Electrical Grass Tips Are Jagged And T ur n Gra y ish Brown After Mowing Dull mowe r bl ades. Bent blades . F ront-to-rear blade adjustment not set properly . Mower Stops When Shift Le v er Is Mov ed Rearw ard and Mower Is Engaged (Hydrostatic) Norm al condition. (See Using Rev erse Implement Option in the OP ...

  • Scotts S1642, S1742, S2046 - page 61

    Storing Machine - 57 STORING MACHINE Storing Mac hine Storing Safel y Preparing Machine f or Storage 1. Repair any worn or damaged par ts. Replace par ts if necessar y . Tighten loose hardware . 2. Clean under the deck. 3. P aint scratched or chipped metal surf aces to pre v ent rust. 4. W ash the machine and apply wax to metal and plastic surf ace ...

  • Scotts S1642, S1742, S2046 - page 62

    Storing Machine - 58 STORING MACHINE 7. Clean the engine and engine compar tment. 8. Remov e batter y . 9. Clean the batter y and batter y posts. NO TE: The stored battery should be recharged e ver y 90 days. 10.Charge the batter y . (See Charging Batter y in the SER VICE - ELECTRICAL sec tion.) 11.Store the batter y in a cool, dr y place where it ...

  • Scotts S1642, S1742, S2046 - page 63

    Specifications - 59 SPECIFICATIONS Specifications Model S1642 Engine Manufacturer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K ohler Horsepo wer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Scotts S1642, S1742, S2046 - page 64

    Specifications - 60 SPECIFICATIONS Horsepo wer (SAE1349) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.9 kW (20 hp) Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 ...

  • Scotts S1642, S1742, S2046 - page 65

    Specifications - 61 SPECIFICATIONS Tire Pressure (Front) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 kPa (14 psi) Tire Pressure (Rear) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Scotts S1642, S1742, S2046 - page 66

    W arranty - 62 W ARRANTY Warrant y LIMITED W ARRANTY FOR NEW SCO TTS BRAN D PRODUCTS Manufactured by John Deere (U .S. Only) A. GENERAL PRO VISIONS - The warranties descr ibed below are provided by John Deere Company ( “ John Deere ” ) t o the orig inal purchasers of new Scotts Brand Products Manufactured by John Deere. Under these warranties, ...

  • Scotts S1642, S1742, S2046 - page 67

    W arranty - 63 W ARRANTY av ailable to the dealer or ser vice cent er within a reas onable period of time. E. LIMIT A TION OF IMPLIED WARRANTIES AND O THER REMEDIES - SCO TTS BRAND PRODUCTS MANUF A CTURED BY JOHN DEERE - TO THE EXTENT PERMITTED BY LA W , NEITHER JOHN DEERE NOR ANY COMP ANY AFFILIA TED WITH IT MAKES ANY WAR RANTIES, REPRESENT A TI O ...

  • Scotts S1642, S1742, S2046 - page 68

    W arranty - 64 W ARRANTY Air Induction System: • Air Cleaner • Intake manifold. Ignition System: • Spark plugs . • Magneto or elec tronic ignition system. • Spark advance/retard sy stem. Catalyst System: • Exhaust manifold. Miscellaneou s Items Used in Above Systems • V acuum an d temper ature swi tc hes . • Electronic controls. • ...

  • Scotts S1642, S1742, S2046 - page 69

    W arranty - 65 W ARRANTY A. Breakage of the contai ner , cover , or te rmina ls. B. Depreciation or dama ge caused by lack of reasonable and necessar y maintenance or by improper maintenance. C . T ranspor t ation, maili ng, or ser vice call charges for w arranty ser vice. LIMIT A TION OF IMPLIED W ARRANTIES AND PURCHASER ’ S REMEDIES T o the ext ...

  • Scotts S1642, S1742, S2046 - page 70

    Inde x - 66 INDEX Index A Air Cleaner Elements - S2046 ........................................ 30 Air Cleaner Elements, Checking and Cleaning - S1642 and S1742 ............................................................................. 29 Air Intake Screen and Engine, Clean ............................. 32 B Battery and Terminals, Cleaning ..... ...

  • Scotts S1642, S1742, S2046 - page 71

    Inde x - 67 INDEX Removing Mower ........................................................... 49 Reverse Implement Option, Using ................................. 11 S Safety Labels .................................................................... 2 Safety Systems, Testing ................................................. 12 Safety, Operating ... ...

  • Scotts S1642, S1742, S2046 - page 72

    Quality Statement - 68 QUALITY STATEMENT Quality Statem en t Please do not return this tractor to the store where y o u purc hased it. Y our Scotts tractor , designed and built by John Deere , is more than just a purchase, it ’ s an inv estment in quality . That quality goes bey ond our equipment to your dealer ’ s par ts and ser vice suppor t. ...

Manufacturer Scotts Category Lawn Mower

Documents that we receive from a manufacturer of a Scotts S1642, S1742, S2046 can be divided into several groups. They are, among others:
- Scotts technical drawings
- S1642, S1742, S2046 manuals
- Scotts product data sheets
- information booklets
- or energy labels Scotts S1642, S1742, S2046
All of them are important, but the most important information from the point of view of use of the device are in the user manual Scotts S1642, S1742, S2046.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Scotts S1642, S1742, S2046, service manual, brief instructions and user manuals Scotts S1642, S1742, S2046. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Scotts S1642, S1742, S2046.

Similar manuals

A complete manual for the device Scotts S1642, S1742, S2046, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Scotts S1642, S1742, S2046 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Scotts S1642, S1742, S2046.

A complete Scotts manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Scotts S1642, S1742, S2046 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Scotts S1642, S1742, S2046, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Scotts S1642, S1742, S2046, that we can find in the current document
3. Tips how to use the basic functions of the device Scotts S1642, S1742, S2046 - which should help us in our first steps of using Scotts S1642, S1742, S2046
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Scotts S1642, S1742, S2046
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Scotts S1642, S1742, S2046 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Scotts S1642, S1742, S2046?

Use the form below

If you did not solve your problem by using a manual Scotts S1642, S1742, S2046, ask a question using the form below. If a user had a similar problem with Scotts S1642, S1742, S2046 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)