English dropdown-ico

Manual TANDBERG E5714

332 pages 2.97 mb
Download

Go to site of 332

Summary
  • TANDBERG E5714 - page 1

    ST.TM.E10076.3 Issue 3 ENGLISH (UK) INSTRUCTI ON MANUAL E5714/E574 0-xxx DSNG, E5715 /E5750 DENG Voyager Encoder Build Version 2.1. 0 to 3.1.0 ( and later) M2/VOY/E5714, M 2/VOY/E57 40-xxx, M2/VOY/E5715, M2/VOY/E 5750 and Options ...

  • TANDBERG E5714 - page 2

    Preliminary Pages Page ii Instructio n Manual: evo lutio n 5000 E57x x DSNG and DENG Voyag er Encoder ST.TM .E100 76. 3 Issue 3 first publ ished in 20 02 by: T ANDBERG T ELEVISION L TD R EGISTERE D A DDRES S : U NIT 2 S TRATEGIC P ARK , C OMINES W AY , H EDGE E ND , S OUTHAMPTON , H AMPSHIRE , SO30 4DA Re g istere d C om p an y Number 036 95535 Thi ...

  • TANDBERG E5714 - page 3

    Preliminary Pages Instruc tion Manual: e v olution 5000 E57xx DSNG and DEN G Voy ag er Encoder Page iii ST.TM .E 10076. 3 List of Contents Chapter 1: Introduction to the Basic Enco der Gives a general descrip ti on of the eq uipment and its main features and functions. Id enti fies the control s, in dicators and connectors on the front and rear pan ...

  • TANDBERG E5714 - page 4

    Preliminary Pages Page iv Instruc tion Manual: e v olution 5000 E57xx DSN G and DEN G Voy a g er Enc o der ST.TM .E100 76. 3 About this Manua l Th is m anu a l pr ov id es ins tr uc t ion s a nd inf or mat io n fo r th e ins ta lla tio n, operation of the Encoder. This manual should be kept in a safe place for refe rence for the life of the equipme ...

  • TANDBERG E5714 - page 5

    Preliminary Pages Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page v ST.TM .E 10076. 3 Ackno wledgements General All best endeavours have bee n made to acknowledge reg istered trademarks and trademarks used throughout this manua l. Any notified omissions will be rectified in the next issue of this manual. Some t ...

  • TANDBERG E5714 - page 6

    Preliminary Pages Page vi Instruction Manual: ev o lution 5000 E57xx DSNG and DENG Voyag er Enco der ST.TM .E100 76. 3 Warnings, Cautions and N otes Heed Warnings Al l war n ing s o n t he pr od uc t an d in t he op er at ing in st ruc t ion s s ho uld be adhered to. The manufacture r can not be held responsible for injuri es or damage where warnin ...

  • TANDBERG E5714 - page 7

    Preliminary Pages Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page vii ST.TM .E 10076. 3 Contact Information TANDBERG Television Custom er Servic es Support Services Our primary objective is to provide first class customer care that is tailored to yo ur s pe cif ic bu sin es s and op er at io na l re qu ire me n ...

  • TANDBERG E5714 - page 8

    Preliminary Pages Page viii Instru c tio n Manual: ev o lution 5000 E57x x DSNG and DENG Voya g er Encoder ST.TM .E100 76. 3 Technical Training Training Course s TANDBERG Televisi on provides a wide range of training courses on the operation and maintenance of our products and on their supporting technologies. TANDBERG can provide bo th regu larly ...

  • TANDBERG E5714 - page 9

    Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 1-1 ST.TM .E10076. 3 Chapter 1 1. Introduction to the Basic Encoder Contents 1.1 Scope of this Manual................................................. 1-3 1.1.1 Who Should Use This Manual ...................... 1-3 1.1.2 Build Version ............................. ...

  • TANDBERG E5714 - page 10

    Introd uc tio n to the Basic Enc o der Page 1-2 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 1U Chassis .................................................. 1-18 2U Chassis .................................................. 1-18 1.4.5 Boards in the Basic Encoder ....................... 1-19 List of ...

  • TANDBERG E5714 - page 11

    Introd uc tio n to the Basic Enc o der Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 1-3 ST.TM .E10076. 3 1.1 Scope of this Manual 1.1.1 Who Should Use This Manual Th is m anu al is wr itte n f or op er ato rs / us er s o f th e 1 U a nd 2 U V oy age r Encoders to assist i n the i nstall ati on , operati on a ...

  • TANDBERG E5714 - page 12

    Introd uc tio n to the Basic Enc o der Page 1-4 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 There are vacant slots for option mo dules; one in the E5714 and E5715; three in the E5760; four in the E5740; five in the E5750. These s lots can be occupied by any comb i nations of modul es shown in Cha ...

  • TANDBERG E5714 - page 13

    Introd uc tio n to the Basic Enc o der Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 1-5 ST.TM .E10076. 3 Informat ion Label Th er e a re two inf or ma tio n lab els wh ich ide ntif y t he co nfig ur atio n o f t he unit. Figure 1.3 and Figure 1.4 are typi cal exampl es. Figure 1.3: Information Label 1 Figure ...

  • TANDBERG E5714 - page 14

    Introd uc tio n to the Basic Enc o der Page 1-6 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 The E5714 and E5740 co ntain the same high performance en coder. The E5714 is a 1U cha ssis hou sing t he e nco der and a QPSK s ate llite mo dula tor. The E5740 is a 2U chas sis ho usin g th e en co der , ...

  • TANDBERG E5714 - page 15

    Introd uc tio n to the Basic Enc o der Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 1-7 ST.TM .E10076. 3 E5714 Th e s ate llite mod ulat or w ithin the E5714 su pport s QPSK modula tion in accordance with EN 300 421 (DVB-S) . It provides a main and monitoring IF Output. The IF frequency can be tuned betwee n ...

  • TANDBERG E5714 - page 16

    Introd uc tio n to the Basic Enc o der Page 1-8 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 1.3 Summary of Features 1.3.1 Video Encoding MPEG-2 Encoding The Encoder proc esses a broadcast-standard video signal into a compressed encoded bit-stre am in accordance wi th: · Th e M PE G- 2 M ain pro ...

  • TANDBERG E5714 - page 17

    Introd uc tio n to the Basic Enc o der Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 1-9 ST.TM .E10076. 3 · Full y exhausti ve motion esti mation · An internal frame synchroni ser (see Internal Frame Synchroniser on Page 1-10 ) · Support for Active Form at Descr i pt or (AFD) (see Chapter 4, Operating the ...

  • TANDBERG E5714 - page 18

    Introd uc tio n to the Basic Enc o der Page 1-10 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 1.4: Video Coding Resolutions 625 Line Modes 525 Line Modes 720 pixels x 576 lines 720 pixels x 480 lines 704 pixels x 576 lines 704 pixels x 480 lines 640 pixels x 576 lines 640 pixels x 480 lines 544 ...

  • TANDBERG E5714 - page 19

    Introd uc tio n to the Basic Enc o der Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 1-1 1 ST.TM .E10076. 3 Audio Inputs The standard audio input i s: · AUDIO IN – 1 5- way male D- t ype - s o ftw ar e s ele ct ab le b alan ce d analogue or digital AES/EBU, with AES/EBU on left only. A break-out ca ble is ...

  • TANDBERG E5714 - page 20

    Introd uc tio n to the Basic Enc o der Page 1-12 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Test Tones The equipment can be configured to generate a test to ne for al ignment purposes. Refer to Annex B, Technical Specification f or leve l an d frequency. Audio Variable Bit-rate MPEG-1 audio output ...

  • TANDBERG E5714 - page 21

    Introd uc tio n to the Basic Enc o der Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 1-1 3 ST.TM .E10076. 3 Table 1.6: Dolby Digital Audio Encoding Bit-rates Bit-rate (kbit/s) Single Channel Mono (1/0) Dual Channel Stereo (2/0) 56 3 - 64 3 - 80 3 - 96 33 112 33 128 33 160 33 192 33 224 33 256 33 320 33 384 33 ...

  • TANDBERG E5714 - page 22

    Introd uc tio n to the Basic Enc o der Page 1-14 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 VBI User Dat a Closed Caption data, together wi th other formats such as VITC and AFD, can be transmitted in the user data field of the video or relevant part of the video stream. VBI in PID Th e E nc od er ...

  • TANDBERG E5714 - page 23

    Introd uc tio n to the Basic Enc o der Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 1-1 5 ST.TM .E10076. 3 1.3.5 Outputs Three ASI-C (copper) outputs supplyi ng a DVB and ATSC 18 MPEG -2 transport stream are supplied as standard. 1.3.6 IF Modulation E5714 Th e int er nal s at ellite mod ulat o r with in the ...

  • TANDBERG E5714 - page 24

    Introd uc tio n to the Basic Enc o der Page 1-16 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 1.4 Guided Tour 1.4.1 Enclosure There are two sizes of encl osure, 1U and 2U v ersi ons. The encl osure i s used as a stand-alone unit. Al l i n puts and outputs are via rear panel connectors. 1.4.2 The User ...

  • TANDBERG E5714 - page 25

    Introd uc tio n to the Basic Enc o der Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 1-1 7 ST.TM .E10076. 3 Power Supply Stand-by Switch The use of this switch puts the Encoder into stand-by mode . It powers down the supply rai l s of the displ ay and internal circui ts wi thin the uni t. The switch type avoi ...

  • TANDBERG E5714 - page 26

    Introd uc tio n to the Basic Enc o der Page 1-18 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 1U Chassis Figure 1.10: E5714 (1U) Rear Panel Component Parts and Connectors Figure 1.11: E5715 (1U) Rear Panel Component Parts and Connectors 2U Chassis Figure 1.12: E5740 (2U) Rear Panel Component Parts an ...

  • TANDBERG E5714 - page 27

    Introd uc tio n to the Basic Enc o der Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 1-1 9 ST.TM .E10076. 3 Figure 1.13: E5750 (2U) Rear Panel Component Parts and Connectors 1.4.5 Boards in the Basic Encoder The basic Encoder contai ns two bo ards mounted hori zontall y i n the enclosure (see Ta b le 1. 8 ). ...

  • TANDBERG E5714 - page 28

    Introd uc tio n to the Basic Enc o der Page 1-20 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 BLANK ...

  • TANDBERG E5714 - page 29

    Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-1 ST.TM .E10076. 3 Chapter 2 2. Installing the Equipment Contents 2.1 Introduction ............................................................... 2-3 2.1.1 Read This First! ............................................ 2-3 2.1.2 General ......................... ...

  • TANDBERG E5714 - page 30

    Installing the Eq uip m e nt Page 2-2 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 IF Out 2 ...................................................... 2-21 2.7 Powering Up/Down .................................................. 2-21 2.7.1 Before Powering Up .................................... 2-21 2. ...

  • TANDBERG E5714 - page 31

    Installing the Eq uip m e nt Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-3 ST.TM .E10076. 3 2.1 Introduction 2.1.1 Read This First! The Encoder must be handled carefull y and thoughtful ly to prevent safety hazards and damage. It is usually suppl ied as part of a system instal led by TANDBERG Telev i si o ...

  • TANDBERG E5714 - page 32

    Installing the Eq uip m e nt Page 2-4 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 FCC This equi pment has been tested and f ound to com p l y wi th the li mi t s for a Clas s A dig ita l de vice , p ur su ant to Pa rt 1 5 o f th e F CC Ru les . T he se limit s are designed to provi de reasonabl e ...

  • TANDBERG E5714 - page 33

    Installing the Eq uip m e nt Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-5 ST.TM .E10076. 3 Figure 2.1: Fitting the Encoder into a Rack 2.3.2 Cable Routing Power supply cables should be routed so that they are not likel y to be walked on or pi nched by i tems placed upon or agai nst them. Pay particul ar ...

  • TANDBERG E5714 - page 34

    Installing the Eq uip m e nt Page 2-6 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 The unit is designed for stationary or fixed use only. Ensure it i s firmly and safely l ocated and has an adequate th rough-fl ow of ai r. All ow at least 50 mm f ree ai r-space at each si de of the equi p m ent. U ...

  • TANDBERG E5714 - page 35

    Installing the Eq uip m e nt Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-7 ST.TM .E10076. 3 2.4 AC Mains Operating Voltage and Earthing 2.4.1 AC Power Supply CAUTION... This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of pow ...

  • TANDBERG E5714 - page 36

    Installing the Eq uip m e nt Page 2-8 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 The unit has a Technical earth termi nal (marked wi th ) located at the re ar p an el. It s u se is r ec om me nde d. Th is is NOT a Protective earth for electri c shock protecti on. The termi nal i s provi ded to: ...

  • TANDBERG E5714 - page 37

    Installing the Eq uip m e nt Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-9 ST.TM .E10076. 3 The internal dc power supply module used in this equi pment i s desi gned for use on dc supplies ranging from 12 to 36 volts dc. (see Annex B, Technical Specification fo r a full p ow er su pp ly sp ec ific at ion ...

  • TANDBERG E5714 - page 38

    Installing the Eq uip m e nt Page 2-10 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 WARNING … THE POWER-SUPPLY CABL E SHOULD BE ROUTED SO THAT IT IS NOT LIKEL Y T O BE DAMAGED OR TRAPPED BY IT EMS PLACED UPON OR AG AINST IT, PAYI NG PARTICULAR ATTENTION TO T HE CABLE AT CONNECTION POINT S. DC Power ...

  • TANDBERG E5714 - page 39

    Installing the Eq uip m e nt Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-1 1 ST.TM .E10076. 3 Figure 2.4: E5715 (1U) Rear Panel Component Parts and Connectors Figure 2.5: E5740-IF (2U) Rear Panel Component Parts and Connectors Figure 2.6: E5740-L-Band (2U) Rear Panel Component Parts and Connectors Option ...

  • TANDBERG E5714 - page 40

    Installing the Eq uip m e nt Page 2-12 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Figure 2.7: E5750 (2U) Rear Panel Component Parts and Connectors 2.6.2 Connecting Up the Basic Encoder Onc e the un it h as be en ins talle d in its inte nd ed op er at ing p os itio n, it is ready to be connected up ...

  • TANDBERG E5714 - page 41

    Installing the Eq uip m e nt Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-1 3 ST.TM .E10076. 3 Do no t mo ve o r ins ta ll eq uip men t w hils t it is st ill at ta che d t o t he ma ins supply. Ensure ESD precauti ons are obs er ved wh ilst inte rc o nne ct ing equipment. NOTE… See Chapter 3 for informat ...

  • TANDBERG E5714 - page 42

    Installing the Eq uip m e nt Page 2-14 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 2.4: H SYNC Connector Pin Signal Centre Video Input Screen Ground Impedance 75 W COMP VIDEO A 75 W BNC connector pro vides a high qual ity analogue vi deo i nput to the unit. See Chapter 4, Operating the Equipme ...

  • TANDBERG E5714 - page 43

    Installing the Eq uip m e nt Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-1 5 ST.TM .E10076. 3 Table 2.6: Audio In Connector Pin Signal Pin Signal Analogue Digital Analogue Digital 1 Left Channel A (+) AES/EBU (A) (+) 9 Left Channel A (-) AES/EBU (A) (-) 2 Not connected 10 Right Channel A (+) 3 Right Chann ...

  • TANDBERG E5714 - page 44

    Installing the Eq uip m e nt Page 2-16 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Ethernet #1 and #2 An 8-way, RJ- 45 connect or provides a 10BaseT Ethernet interface for communi cati ons with the MEM for control and moni tori ng . The Encoder has a si ngl e switched Ethernet channel . Ethernet#1 i ...

  • TANDBERG E5714 - page 45

    Installing the Eq uip m e nt Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-1 7 ST.TM .E10076. 3 Remote Contr ol A 9-way, D-type male connector pro vides an RS-232/R S-485 port for re mote co ntrol of the Encoder (see Serial Protocol Option ). Thi s connector is wired as a DTE. Table 2.10: Remote Control Con ...

  • TANDBERG E5714 - page 46

    Installing the Eq uip m e nt Page 2-18 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 NOTES… 1. Signal names are with respect to a DTE in accordance with the RS-232 specification. 2. Remote pin numbers only apply to a 9-way D-type connector. 3. 25-way connectors have Received Data on pin 3 and Transm ...

  • TANDBERG E5714 - page 47

    Installing the Eq uip m e nt Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-1 9 ST.TM .E10076. 3 2.6.10 Satellite Modulator IF Output (E5714 and E5740 IF) IF Out (Main) 75 W BNC socket provides an IF o utput. Table 2.13: IF Out Connector (Main) Item Specification Connector type BNC 75 W Female Type Analogue ...

  • TANDBERG E5714 - page 48

    Installing the Eq uip m e nt Page 2-20 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 L-Band Out (Main) 50 W SMA female connector provides the main L-band output. This can also provide +24 V dc at up to 500 mA to power an up-converter. Table 2.16: L-band Out (Main) Connector Item Specification Connecto ...

  • TANDBERG E5714 - page 49

    Installing the Eq uip m e nt Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 2-2 1 ST.TM .E10076. 3 IF Out 2 A 75 W BNC socket pro vides a 70 MHz IF output used fo r monitori ng. Table 2.18: IF Out 2 Connector Item Specification Connector Type BNC 75 W Female Type Analogue Connector designation IF Out 2 Pin-out ...

  • TANDBERG E5714 - page 50

    Installing the Eq uip m e nt Page 2-22 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 2.8 Setting the Encoder IP Address 2.8.1 Methods of Changing the Encoder IP Address If, for any reason, the IP address has to be changed, this can be achieved via the front panel menus (see Section 4.7.4 Remo te Contr ...

  • TANDBERG E5714 - page 51

    Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-1 ST.TM .E10076. 3 Chapter 3 3. Options and Upgrades Contents 3.1 What’s Available........................................................ 3-3 3.1.1 Option Functions........................................... 3-3 3.1.2 Limitations on Number of Option Modules ( ...

  • TANDBERG E5714 - page 52

    Options and Upg r ad es Page 3-2 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 3.10 16QA M Demodulator (M2/EOM2/SATDEMOD) ...... 3-24 3.10.1 Overview ..................................................... 3-24 3.10.2 Assembly..................................................... 3-25 Rear Panel ..... ...

  • TANDBERG E5714 - page 53

    Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-3 ST.TM .E10076. 3 3.1 What’s Available 3.1.1 Option Functions The basic Encoder functional it y can be enhanced wi th the incl usion of options, hardware and software. Each hardware option modul e consi sts of a horizontall y mounted P ...

  • TANDBERG E5714 - page 54

    Options and Upg r ad es Page 3-4 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 Table 3.2: Software Options Marketing Code Name Used in 1U Used in 2U M2/ESO2/NR Noise Reduction 44 M2/ESO2/PU Performance Upgrade/Bit-rate <1.5 Mbit/s 44 M2/ESO2/VBR VBR Licence 44 M2/ESO2/422 4:2:2 44 M2/ESO2/RAS RA ...

  • TANDBERG E5714 - page 55

    Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-5 ST.TM .E10076. 3 3.2 Bit-rate Limi ts Wi th Reflex Li cence and/or Performance Upgrade A user with a REFLEX l icence (M2/ES O2/VBR) but no Performance Upgrade (M 2/ ES O2 /PU ) w ill be ab le t o g et lowe r b it- ra te s t han 1.5 M bi ...

  • TANDBERG E5714 - page 56

    Options and Upg r ad es Page 3-6 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 BISS scrambling (when fitted) is enabl ed and controll ed via the Setup/Mux Menu (see Chapter 4, Operating the Equi pment Locally, Section 4.12.12 ). 3.4 Additional Audio and Linear PCM Option (M2/EOM2/AUDLIN) 3.4.1 Over ...

  • TANDBERG E5714 - page 57

    Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-7 ST.TM .E10076. 3 3.4.2 Assembly Rear Panel NOTE… The AES/EBU reference signal is provided for ba ckwards compatibility only. When using E57xx Encoders use the reference signal provided by the Base Board. Figure 3.1: Additional Audio a ...

  • TANDBERG E5714 - page 58

    Options and Upg r ad es Page 3-8 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 Table 3.4: Audio In Connector Pin Signal Pin Signal Analogue Digital Analogue Digital 1 Left Channel A (+) AES/EBU (A) (+) 9 Left Channel A (-) AES/EBU (A) (-) 2 Not connected 10 Right Channel A (+) 3 Right Channel A (-) ...

  • TANDBERG E5714 - page 59

    Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-9 ST.TM .E10076. 3 3.5 RS-232 and RS-422 Data Input Opti on (M2/EOM2/DAT) 3.5.1 Overview NOTE… The Data Input Option does not report errors back to the host, thus no alarms are raised by the Encoder. The RS -232 and RS-422 D ata Input o ...

  • TANDBERG E5714 - page 60

    Options and Upg r ad es Page 3-10 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Async Connector A 9-way, D-type female connecto r provides an RS-232 async hronous, se rial communicati ons data i nput interface. Table 3.5: RS-232 Data Connector (Option Module) - Asynchronous Remote (DTE) Male Data Modu ...

  • TANDBERG E5714 - page 61

    Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-1 1 ST.TM .E10076. 3 Table 3.6: RS-422 Data Connector (Option Module) - Synchronous Remote (DTE) Data Module RS-422 (DCE) Signal Name Signal Dir ection Pin Signal Name 1 Not c onnected Transmit Data A 2 Transmit Data A Data Terminal Ready ...

  • TANDBERG E5714 - page 62

    Options and Upg r ad es Page 3-12 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 3.6 Remux Option (M2/EOM2/REMUX) 3.6.1 Overview NOTE… The M2/EOM2/REMUX Remux Option Module is supported by Build version 2.2.0 and later. The Remux option module i s capable of accepti ng up to three separate transport ...

  • TANDBERG E5714 - page 63

    Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-1 3 ST.TM .E10076. 3 DVB ASI IN 1, 2 and 3 Connectors A 75 W BNC connector provides an in put to the uni t. Table 3.7: DVB ASI In Connector Pin Signal Centre Signal Screen Ground NOTE… When connecting the inputs, always start from DVB A ...

  • TANDBERG E5714 - page 64

    Options and Upg r ad es Page 3-14 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Figure 3.4: Block Diagram – One Stage of Remultiplexing Sim ilarly , if t wo st age s of re mult iple xing ar e in tro du ce d, thir te en En co de rs ca n be c omb ine d, p ro vid ing u p t o t hirt ee n s e rvic es in ...

  • TANDBERG E5714 - page 65

    Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-1 5 ST.TM .E10076. 3 3.6.4 Function of Remultiplexer It is t he fun ct ion of th e R em ultip lex er to co mb ine the lo cally ge ne ra te d ho st se rvic e s w ith t he ex te rn ally s up plie d inp ut se rvic e s, c o nne ct ed via AS I ...

  • TANDBERG E5714 - page 66

    Options and Upg r ad es Page 3-16 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 3.6.5 Using the Remultiplexer Set the output bit-rate to the required val ue i n the Setup/Mux Menu . Connect transport streams that are to be combin ed (rem ulti pl ex ed) wi th the host Encoder’s services to the ASI i ...

  • TANDBERG E5714 - page 67

    Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-1 7 ST.TM .E10076. 3 The easiest way to conf i gure the bi t-rates to avoi d ov erf l ow, i s as foll ows: 1. Divide the 188 byte output bit-rate of the primary (master) remulti pl exing uni t, (this can be found i n the Setup/Mux/Remux M ...

  • TANDBERG E5714 - page 68

    Options and Upg r ad es Page 3-18 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 3.7 XLR Expander Card Option (M2/EOM2/XLR) 3.7.1 Overview NOTE… The M2/EOM2/XLR XLR Expander Card Option is supported by B uild version 3.0 and later. The XLR Expander Card Option permits Encoders to input and output a s ...

  • TANDBERG E5714 - page 69

    Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-1 9 ST.TM .E10076. 3 NOTES… 1. Pre-encoded signals cannot be reconstructed on the analogue outputs. 2. Pre-encoded signals will raise an alarm on the digital output. Figure 3.7: XLR Expander Card Option (M2/EOM2/XLR) The XLR Expande r C ...

  • TANDBERG E5714 - page 70

    Options and Upg r ad es Page 3-20 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 NOTES… 1. When the Encoder is powered down the digital channel is selected with 110 W termination. 2. The digital audio input does not support SPDIF. Audio Out C on nector Two XLR male connectors prov i de a stereo pair. ...

  • TANDBERG E5714 - page 71

    Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-2 1 ST.TM .E10076. 3 3.8 SD Decoder Option (M2/EOM2/DEC) 3.8.1 Overview NOTES… 1. The M2/EOM2/DEC SD Decoder Option is supported by Build version 3.1 and later. 2. This option module only fits into option slot 6 in the E5740, and must a ...

  • TANDBERG E5714 - page 72

    Options and Upg r ad es Page 3-22 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Composite V i deo Output A 75 W female BNC connector pro vides a composite video outp ut. See Annex B, Technical Specification for a li st of supported vi deo standards. Table 3.15: Composite Video Connector Item Specifica ...

  • TANDBERG E5714 - page 73

    Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-2 3 ST.TM .E10076. 3 RS-232/RS-422 Data Output A 9-way D-type socket provides the data outputs. Table 3.17: RS232/RS422 D ata Output Connector Item Specification Connector Type 9-way D-type Socket Connector designation RS232/RS422 DATA Pi ...

  • TANDBERG E5714 - page 74

    Options and Upg r ad es Page 3-24 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 3.9.2 Assembly Rear Panel W IF In A 75 W female BNC connector pro vides an IF Input. Table 3.18: IF In Connector Item Specification Connector Type 75 W BNC Female Connector designation IF IN Pin-outs Centre Signal Screen G ...

  • TANDBERG E5714 - page 75

    Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-2 5 ST.TM .E10076. 3 3.10.2 Assembly Rear Panel L-Band Inputs Two 75 W F-type female connectors provid e L-band inpu ts . Table 3.20: L-Band Input Connector Item Specification Connector Type 75 W F-type Fema le Connector designation L-Ban ...

  • TANDBERG E5714 - page 76

    Options and Upg r ad es Page 3-26 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Between one and seven MPEG-2 transp ort stream packets can be put i n ea ch UD P pa cke t. Th e d at a link lay er is E the rn et ac co rd ing t o IEEE 802.3/802.3u (auto -sensing 10/100 Mbit/s, twisted pair, via RJ-45 con ...

  • TANDBERG E5714 - page 77

    Options and Upg r ad es Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 3-2 7 ST.TM .E10076. 3 ASI Out A 75 W female BNC connector provides an ASI output. NOTE… This connector is not used. Table 3.22: ASI Out Connector Item Specification Connector Type 75 W BNC Female Connector designation ASI OUT Pin-outs Ce ...

  • TANDBERG E5714 - page 78

    Options and Upg r ad es Page 3-28 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 3.12.3 M2/ESO2/VBR This purchasable option upgrades the Encoder to include vari able bi t-rate. Contact Customer Services for detail s. 3.12.4 M2/ESO2/422 This purchasable option upgrades the Encoder to include 4:2:2 video ...

  • TANDBERG E5714 - page 79

    Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-1 ST.TM .E10076. 3 Chapter 4 4. Operating the Equipment Locally Contents 4.1 Introduction ............................................................... 4-9 4.2 Establishing Local Control (1U)................................. 4-9 4.3 Navigating the Display Scre ...

  • TANDBERG E5714 - page 80

    Operating th e Equipment Locally Page 4-2 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 SNMP Master Option .................................. 4-25 Last SNMP Master Option .......................... 4-25 Last SNMP Poll Option ............................... 4-25 SNMP Trap IP Option ................. ...

  • TANDBERG E5714 - page 81

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-3 ST.TM .E10076. 3 Audio Delay Option ..................................... 4-57 External Delay Option ................................. 4-57 Clip Level Option ........................................ 4-58 Impedance Option ...... ...

  • TANDBERG E5714 - page 82

    Operating th e Equipment Locally Page 4-4 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 Tx Bandwidth Option ................................... 4-81 Bit-rate (188) Option.................................... 4-81 Bit-rate (204) Option.................................... 4-81 Preset Pwr Low Option .. ...

  • TANDBERG E5714 - page 83

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-5 ST.TM .E10076. 3 Major Channel Option ............................... 4-101 Minor Channel Option ............................... 4-101 Logical Channel Option ............................ 4-101 CA Input Option .................. ...

  • TANDBERG E5714 - page 84

    Operating th e Equipment Locally Page 4-6 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 4.17.12 Store Configs in Backup Option ................ 4-122 4.17.13 Factory 525 Defaults Option ..................... 4-123 4.17.14 Factory 625 Defaults Option ..................... 4-123 List of Figures Figur ...

  • TANDBERG E5714 - page 85

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-7 ST.TM .E10076. 3 Table 4.80: Carri ers Opti ons ....................................................... 4-75 Table 4.81: Other Frequency Opti ons ......................................... 4-76 Table 4.82: Modulati on Type Optio ...

  • TANDBERG E5714 - page 86

    Operating th e Equipment Locally Page 4-8 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 BLANK ...

  • TANDBERG E5714 - page 87

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-9 ST.TM .E10076. 3 4.1 Introduction The front panel displ ay and keypad are used to configure, control and monitor the Encoder. The control i n terface i s a structured menu which gives access to the vari ous options. Thi s chapt ...

  • TANDBERG E5714 - page 88

    Operating th e Equipment Locally Page 4-10 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Figure 4.2: 1U Navigation Keys and Buttons NOTE… The navigation keys are referred to as LEFT, RIGH T, UP and DOWN, indicating the direction of the arrows. From the Summary Screen select the Main Menu by pressi n ...

  • TANDBERG E5714 - page 89

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-1 1 ST.TM .E10076. 3 For Multiple Choice Entr y · DOWN Scroll s down to nex t opti on · UP Scroll s up to previous option · RIGHT No acti on · LEFT No action · ENTER Accepts new setting · CANCEL Leaves setting unchanged For ...

  • TANDBERG E5714 - page 90

    Operating th e Equipment Locally Page 4-12 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 4.4 Establishing Local Control (2U) 4.4.1 Input Monitor At power-on the Encoder runs throug h a boot sequence (boot tim e wi th Re mux op tio n mo du le is ap pr oxim at ely 90 s ec on ds ). An initia l In pu t Mo ...

  • TANDBERG E5714 - page 91

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-1 3 ST.TM .E10076. 3 4.4.3 A(udio) / V(ideo) Me nu (2U) The A/V Menu contai ns some basic vi deo and audio opti ons. They can al l be changed with the exception of the audio input levels. These are only indi cators of the current ...

  • TANDBERG E5714 - page 92

    Operating th e Equipment Locally Page 4-14 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Figure 4.6: 2U Keypad and Display Functions 4.5.2 How to Use the Ke ypad Each key on the keypad has more than one i nscri pti on. O ne press of a k ey makes the number appear on the di spl ay screen, two qui ck pr ...

  • TANDBERG E5714 - page 93

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-1 5 ST.TM .E10076. 3 4.5.3 How to Use the Functions Associate d with Softkeys The foll owi ng displ ay screens show the di fferent functions associ ated with the options. NOTE… A black diagonal cross enclosed by a white circle ...

  • TANDBERG E5714 - page 94

    Operating th e Equipment Locally Page 4-16 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Config Menu Front Pa nel Diagnost ic s Menu LCD Displ ay Keyboa rd Fail Relay Alarm Rel ay Alarm LE D Buzze r Quit Setup Menu System.. .. See Figu re 4 .9 Vide o.. .. S ee Fi gure 4.10 Aud io.. .. S ee Fi gure 4.1 ...

  • TANDBERG E5714 - page 95

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-1 7 ST.TM .E10076. 3 4.5.6 Summary Screen and Advanced Menus See Figure 4.8 , for the top-l evel me nu hierarchy. Press the More softkey in th e Summary Screen to access the Advanced Menu . The Advanced Menu provides options for ...

  • TANDBERG E5714 - page 96

    Operating th e Equipment Locally Page 4-18 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 System Menu Service Info.... Remote Control.... General. ... Advanc ed.... Mbd Ser vices 4, 5 .... Build .... Quit Service In fo Menu Remote Control Menu General Men u Adva nced Menu Setup Pass word Curr ent Pa ss ...

  • TANDBERG E5714 - page 97

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-1 9 ST.TM .E10076. 3 4.7.2 Service Info Menu (Syntax = ATSC 1 ) Overview The Service Info Menu is sel ected from the System Menu by pressing the Service Info so ftkey. This menu provides options for configuring the Service Inform ...

  • TANDBERG E5714 - page 98

    Operating th e Equipment Locally Page 4-20 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.3: SI Level Options Selected Option Descr iption PAT/PMT/CAT onl y Program As sociation Tabl e/ Program Map Table/ Conditi onal Access Table. PAT/PMT only Program Ass ociation Tabl e/ Program Map Table. Of ...

  • TANDBERG E5714 - page 99

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-2 1 ST.TM .E10076. 3 DST Start Date Option ( 3.0 and l ater) To access the DST Start Date (Dayli g ht Saving Time) opti on, press the DST Start Date softkey in the Service Info Menu . Th is o pt ion allo ws the Dayli ght Saving T ...

  • TANDBERG E5714 - page 100

    Operating th e Equipment Locally Page 4-22 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.5: SI Level Options Selected Option Description PAT/PMT/CAT onl y Program Associati on Table/ Program Map Table/ Conditi onal Access T able. PAT/PMT only Program Associ ation Table/ Program Map Table. Off ...

  • TANDBERG E5714 - page 101

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-2 3 ST.TM .E10076. 3 Transport Stream Id Option To access the Transport Stre am Id opti on, press the Transport Stream Id softkey in the Service Info Menu . This enables the Transport Stream Identity to be specif i ed. Use the + ...

  • TANDBERG E5714 - page 102

    Operating th e Equipment Locally Page 4-24 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.10: Audio AC-3 Descriptor Options Selected Option Descr iption DVB & ATSC Both the ATSC and DVB descriptors are used with the audio streams . DVB only Only the DVB desc riptors are used with the audi o ...

  • TANDBERG E5714 - page 103

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-2 5 ST.TM .E10076. 3 SNMP Master Option To access the SNMP Mast er opti on, press the SNMP Master softkey in the Remote Control Menu . Thi s gi ves the SNMP Master ’s IP address. If this is se t, o nly on e S N MP co nt ro ller ...

  • TANDBERG E5714 - page 104

    Operating th e Equipment Locally Page 4-26 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.13: SABus Baud Rate Options Selected Option Description Selected Option Description 1200 1200 Baud rate. 9600 9600 Baud rate. 2400 2400 Baud rate. 19200 19200 Baud rate. 4800 4800 Baud rate. 38400 38400 Ba ...

  • TANDBERG E5714 - page 105

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-2 7 ST.TM .E10076. 3 UTC Offset Option Th e U nive rs al T ime Co -o rd ina te (U TC ) is effectiv el y the same as Gr eenw i ch Mean Time (GMT) . When incl uding SI i n the output transport stream the Encoder is required to outp ...

  • TANDBERG E5714 - page 106

    Operating th e Equipment Locally Page 4-28 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Power Dip Recovery Option To access the Power Dip Recovery opti on, press the Po wer D i p Recovery softkey in the General Menu . Table 4.18: Power Dip Recovery Options Selected Option Description On The outputs a ...

  • TANDBERG E5714 - page 107

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-2 9 ST.TM .E10076. 3 4.7.6 Advanced Menu Overview The Advanced Menu is sel ected from the System Menu by pressing the Advanced softkey. T his menu provides options for the advanced parameters of the Encoder. See Figure 4.9 for th ...

  • TANDBERG E5714 - page 108

    Operating th e Equipment Locally Page 4-30 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Action On PID Error Option To access the Action on PID Error opti on, press the Action on PID Error softkey in the Advanced Menu . Table 4.21: Action on PID Error Options Selected Option Description Raise Alarm An ...

  • TANDBERG E5714 - page 109

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-3 1 ST.TM .E10076. 3 CAUTION… The Reset Encoder option is not normally used. One example of its use is when code has been dow nloaded in background mode (such as Base Board code or Video Compression Module (VCM) code) and you w ...

  • TANDBERG E5714 - page 110

    Operating th e Equipment Locally Page 4-32 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Video Menu Video Source.... Vid eo En cod er . ... VBI.... Vide o Source Menu VBI Menu Video Encoder Menu Menu opti ons de pend on Vide o Sour ce sel ect ed Setup Menu Teletext ( All lines) Teletext Da ta Out Tele ...

  • TANDBERG E5714 - page 111

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-3 3 ST.TM .E10076. 3 Input Source Select NOTE… This option is available in Build version 3.1.0 and later. To access the Input Source Select opti on, press the Input Source Select softkey from the Video Source Menu . T his allo ...

  • TANDBERG E5714 - page 112

    Operating th e Equipment Locally Page 4-34 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.25: Frame Rate Options Selected Option Descr iption 29.97 Hz Used in 525 li nes (NTSC-M + PAL-M). 25 Hz Used in 625 li nes (PAL). Video Locke d Option Th is o pt ion indic at es wh et he r t he vide o is l ...

  • TANDBERG E5714 - page 113

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-3 5 ST.TM .E10076. 3 To access the Video Bandwi dth opti on, press the Video Bandwidth softkey from the Video Source Menu . Table 4.28: Video Bandwidth Options Selected Option Descr iption Sharp Fi lter is at the maxi mum bandwid ...

  • TANDBERG E5714 - page 114

    Operating th e Equipment Locally Page 4-36 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.30: Noise Reduction Options Selected Option Descr iption Off Level 1 Use noise reducti on, if necessary , but don't 'damage' the picture i n any way. Level 2 Medium setting (best c ompromise ...

  • TANDBERG E5714 - page 115

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-3 7 ST.TM .E10076. 3 Table 4.31: Profile/Level Options Selected Option Descr iption MP@ML Main Profile @ Main Level . Typical ly used in 4:2:0 di rect to home. 422P@ML 4:2:2 Profile @ Mai n Level. Typi cally us ed in 4:2:2 contri ...

  • TANDBERG E5714 - page 116

    Operating th e Equipment Locally Page 4-38 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.33: Seamless Mode Bit-rate (Full Resolution Only) Profile Seamless 1 (Mbit/s) Seamless 2 (Mbit/s) Seamless 3 (Mbit/s) Seamless 4 (Mbit/s) Seamless 5 (Mbit/s) Seamless 6 (Mbit/s) 4:2:0 0.8 - 10 1.5 - 10 2 - ...

  • TANDBERG E5714 - page 117

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-3 9 ST.TM .E10076. 3 It is possibl e to operate the Encoder in a stand-al one Variabl e Bit-rate (VBR) mode . When in this mode the bit-rate generate d by the video encoder ranges be tween a minimum (Bmin - dependent on Compressi ...

  • TANDBERG E5714 - page 118

    Operating th e Equipment Locally Page 4-40 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 The required p i cture qual ity i s set in the sam e m enu by the VBR T arget Quality it em . When running i n VBR Mode the two top-l evel status screens show the cu rre nt bit -r ate be ing us ed . T his will ty ...

  • TANDBERG E5714 - page 119

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-4 1 ST.TM .E10076. 3 Table 4.34: Resolution Options Selected Option Description 625 Line Modes 525 Line Modes Auto (720x576) Auto (720x 480) 720 x576 720 x 480 704 x576 704x 480 640 x576 640x 480 544 x576 544x 480 480 x576 480x 4 ...

  • TANDBERG E5714 - page 120

    Operating th e Equipment Locally Page 4-42 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.37: AFD Information Video Input Encoder Video Index Extraction Encoder AFD off Encoder AFD on Encoder AFD on (No action on Erro r) Sequence_header aspect_ratio_infor mation AFD user_data() active_format se ...

  • TANDBERG E5714 - page 121

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-4 3 ST.TM .E10076. 3 GOP Len gth Option To access the Group of Pictures (GOP) Length option, press the GO P Length softkey in the Video Encoder Menu . This enabl es the vi deo GOP structure l e ngth to be set. The structure lengt ...

  • TANDBERG E5714 - page 122

    Operating th e Equipment Locally Page 4-44 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 With frame pi ctures a fra me of a fiel d 1 and fi eld 2 is encoded as a singl e unit. With fi eld pi ctures each indi vidual field of vi deo is encoded as a singl e unit, but must be followed or preceded by anoth ...

  • TANDBERG E5714 - page 123

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-4 5 ST.TM .E10076. 3 PID Option The PID option i s sel ected f r om the Video Encoder Menu by pressing the PID softkey. The o ption is used for entering or updating video PIDs, as required . Enter a P ID then pr ess the Enter sof ...

  • TANDBERG E5714 - page 124

    Operating th e Equipment Locally Page 4-46 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 4.8.4 Vertical Blanking Interval (VBI) Menu Overview The VBI Menu i s selected from the Video Menu by pressing the VBI softkey. This menu permits th e sel ection of VBI parameters. The VBI lines vary, according to ...

  • TANDBERG E5714 - page 125

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-4 7 ST.TM .E10076. 3 VBI In P icture Opti on NOTES… 1. The VBI in Pictur e option is only accessible if the selected video profile/level is 422P@ML 6 . 2. VBI in Pictur e transmits the VBI waveform as part of the picture and as ...

  • TANDBERG E5714 - page 126

    Operating th e Equipment Locally Page 4-48 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 WSS (Line 23) Option NOTES… 1. This option is only available when Frame Rate is 25 Hz. 2. Aspect ratio will change when WSS is enabled. To access the WSS (Line 23 ) opti on, press the WSS (Line 23) softkey in th ...

  • TANDBERG E5714 - page 127

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-4 9 ST.TM .E10076. 3 Table 4.43: VBI - Line ‘n’ Options Option Description Frame Rate = 29.97 Hz Off VBI data i s not extracted from the li ne. Vertical Interval Time Code VITC data extracted from the line. Video Index Closed ...

  • TANDBERG E5714 - page 128

    Operating th e Equipment Locally Page 4-50 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 FIELD 1 FIELD 2 272 9 Same options as li ne 10 10 VITC (SMPTE), Video Index, Off, Cl osed Caption, Nielsen/AMOL 1, Ni elsen/AMOL 11 273 10 Same options as li ne 10 11 11 Same options as li ne 10 274 11 Same option ...

  • TANDBERG E5714 - page 129

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-5 1 ST.TM .E10076. 3 FIELD 1 FIELD 2 7 Teletext Sys tem B or Inverted Teletext, VITC, Vi deo Index, Closed Caption, Wide Scr een Signalling (WSS), Off, Video Programming System (VPS) 319 Same options as li ne 7 8 Same options as ...

  • TANDBERG E5714 - page 130

    Operating th e Equipment Locally Page 4-52 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 4.9 Audio Menu 4.9.1 Overview The Audio Menu i s selected from the Setup Menu by pressing the Audio softkey. This menu permits the sel ect i on of audio parameters. Any option with a cl ear ci rcle next to i t can ...

  • TANDBERG E5714 - page 131

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-5 3 ST.TM .E10076. 3 Audio Menu Audio A .... Audio B .... Audio X LR.... Audi o Lang uages Menu optio ns depend o n Coding Stand ard selected Audio A Menu Audio B Menu Setup Menu Shaded options are s howing st atus and cannot be ...

  • TANDBERG E5714 - page 132

    Operating th e Equipment Locally Page 4-54 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Source Option To access the Source option, press the Source softkey in the Audio A Menu . Table 4.44: Source Options Selected Option Descr iption Off No audio packets are s ent in the transport stream and audio i ...

  • TANDBERG E5714 - page 133

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-5 5 ST.TM .E10076. 3 Audio Bit-rate Option NOTES… 1. This option is only shown when the Coding Standard is AC-3 Pass-Thru, MP EG Layer 2 or Dolby Digital (AC-3). 2. When AC-3 Pass-Thru is selected, Audio B it-rate is status onl ...

  • TANDBERG E5714 - page 134

    Operating th e Equipment Locally Page 4-56 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Input Leve l R Option NOTE… This option is not shown when the Coding Standard is MPEG Layer 2 (mono) or Dolby Digital (A C-3) (1/0). Th is o pt ion indic at es th e in pu t le vel o f t he rig ht a ud io c ha nn ...

  • TANDBERG E5714 - page 135

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-5 7 ST.TM .E10076. 3 Lip Sync Offset Option NOTE… This option is only available if the Auto Lip Sync option is set to On. To access the Lip Sync Offset opti on, press the Li p Sync O ffset softkey in the Audio A Menu . Table 4. ...

  • TANDBERG E5714 - page 136

    Operating th e Equipment Locally Page 4-58 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Clip Level Option To access the Cli p Lev el option, press the Clip Leve l softkey in the Audio A Menu . T his sc re en en able s the au dio clip pin g le vel t o b e s e t. NOTES… 1. This option is only shown w ...

  • TANDBERG E5714 - page 137

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-5 9 ST.TM .E10076. 3 SMPTE 302M Standard Option NOTES… 1. This option is only shown when the Coding St andard is Linear PCM or Dolby E P ass-Thru. 2. Problems may be experienced with some Receiver s if the Encoder and Decoder a ...

  • TANDBERG E5714 - page 138

    Operating th e Equipment Locally Page 4-60 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.55: Bit Stream Mode Options Selected Option Descr iption Complete Main Music & Effects Visually impa ired Hearing impaired Dialogue Commentary Emergency Voice Over/Karaoke In Dolby Digital when the cod ...

  • TANDBERG E5714 - page 139

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-6 1 ST.TM .E10076. 3 Production Info Option NOTE… This option is only shown when the C oding Standard is Dolby Digital (AC-3). To access the Production Info opti on, press the Production Info softkey in th e Audio A Menu . Th i ...

  • TANDBERG E5714 - page 140

    Operating th e Equipment Locally Page 4-62 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Copyright Option NOTE… This option is shown when the Coding Standard is Dolby Digital (AC-3) or MPE G Layer 2. To access the Copyright opti on, press the Copyright softke y in the Audio A Menu . T his indic at e ...

  • TANDBERG E5714 - page 141

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-6 3 ST.TM .E10076. 3 RF Prote ction Option NOTE… This option is only shown when the C oding Standard is Dolby Digital (AC-3). To access the RF Protection opti on, press the RF Protection softkey in the Audio A Menu . The option ...

  • TANDBERG E5714 - page 142

    Operating th e Equipment Locally Page 4-64 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Low Pass Filter Option NOTE… This option is only shown when the C oding Standard is Dolby Digital (AC-3). To access the Low Pass Fil ter opti on, press the Lo w P ass Filter softkey in the Audio A Menu . This pa ...

  • TANDBERG E5714 - page 143

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-6 5 ST.TM .E10076. 3 4.9.3 Audio Languages Menu The Audio Languages Menu i s selected from the Audio Menu by pressing the Audio Langua ges softkey. Thi s menu permi t s the sel ection of languages used i n the MPEG broadcast. Eng ...

  • TANDBERG E5714 - page 144

    Operating th e Equipment Locally Page 4-66 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.65: Output Source Options Selected Option Descr iption SDI Embedded (1-4) Any of the SDI embedded audio feeds. XLR Input (Monitor) Output the audio which is input to the card. Off No output. Output Format ...

  • TANDBERG E5714 - page 145

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-6 7 ST.TM .E10076. 3 only s hown if M2/EOM2 /DAT option fitted Data Menu Data A - RS232.... Data B - RS422.... Data X A - RS232.... Data X B - RS422.... Setup Menu Shaded options are showi ng stat us and cannot be c hanged. Data ...

  • TANDBERG E5714 - page 146

    Operating th e Equipment Locally Page 4-68 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.68: Baud Rate Options Selected Option Description Selected Option Description 1200 1200 Baud rate. 9600 9600 Baud rate. 2400 2400 Baud rate. 19200 19200 Baud rate. 4800 4800 Baud rate. 38400 38400 Baud rat ...

  • TANDBERG E5714 - page 147

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-6 9 ST.TM .E10076. 3 Bit-rate Opti on To access the Bit-rate opti on, press the Bi t-rate softkey in the Data B - RS422 Menu . This enab l es the bi t-rate of the RS-4 2 2 synchronous data channel to be set. Table 4.70: Bit-rate ...

  • TANDBERG E5714 - page 148

    Operating th e Equipment Locally Page 4-70 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 4.10.4 Data XA - RS232 Menu (When M2/EOM2/DAT Fitted) Overview NOTE… In the Data XA - RS232 Menu, X = the number of the option slot that the module fits into. See Section 4.10.2, Data A - RS232 Me nu, for the fo ...

  • TANDBERG E5714 - page 149

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-7 1 ST.TM .E10076. 3 Setu p Menu Out put Menu Satel lite Modul ator Menu IF Outpu t L-Band O utput Descr iptor Type Menu opti ons dep end on Descriptor Type Selected Delive ry Desc rip tor Menu Cable Othe r Freque ncy Terre stria ...

  • TANDBERG E5714 - page 150

    Operating th e Equipment Locally Page 4-72 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 4.11.2 Output Format Option To access the Output Format option, press the Output Format softkey in the Output Menu . The menus avail able depend upon whi ch option cards are fitted to the uni t. If the Output Form ...

  • TANDBERG E5714 - page 151

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-7 3 ST.TM .E10076. 3 Table 4.72: Band Plan Options Selected Option Selected Option Australia Irel and Europe VHF South Africa Europe CATV French Overseas PIA Italy France Morocco Japan New Zealand USA China CCIR 10 OIRT 11 Manual ...

  • TANDBERG E5714 - page 152

    Operating th e Equipment Locally Page 4-74 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 NOTE… This option is status only unless Manual has been selected in the Band Plan option. Table 4.75: Bandwidth Options Selected Option Description 6 MHz Terrestrial transmitter channel spacing is 6 MHz. 7 MHz T ...

  • TANDBERG E5714 - page 153

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-7 5 ST.TM .E10076. 3 If the Hierarchy option i s set to Alpha= n , then the FEC (HP) and FEC (LP) parameters provi de two l evels of modulati on. Transmission starts with the code rate for the HP l e vel of modul ati on and ends ...

  • TANDBERG E5714 - page 154

    Operating th e Equipment Locally Page 4-76 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 4.81: Other Frequency Options Selected Option Description None No other frequency is i n use. in use One or more other frequencies are i n use. 4.11.6 Descriptor Type = Cable Frequency Option See Frequency O ...

  • TANDBERG E5714 - page 155

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-7 7 ST.TM .E10076. 3 Table 4.84: FEC (Inner) Options Selected Option Description No conv. coding Cable channel does not use inner FE C rate. 1/2 Cable channel uses inner FEC rate of 1/2. 2/3 Cable channel uses inner FEC rate of 2 ...

  • TANDBERG E5714 - page 156

    Operating th e Equipment Locally Page 4-78 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Orbital Posi tion Option To access the Orbital Positi on opti on, press the Orbi ta l P osi ti on softkey in the Delivery Descriptor Menu . Th is e na ble s t he or bita l po sit ion of the s ate llite to be sp ec ...

  • TANDBERG E5714 - page 157

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-7 9 ST.TM .E10076. 3 IF Power Option To access the IF Power option, press the IF Power softkey in the Satellite Modulator Menu . Table 4.90: IF Power Options Valid Input Range Description Min: –20 dBm Max: 5 dBm IF Frequency Op ...

  • TANDBERG E5714 - page 158

    Operating th e Equipment Locally Page 4-80 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Symbol Rate Opti on To access the Symbol Rate opti on, press the Symbol Rate softkey in the Satellite Modulator Menu . Table 4.93: Symbol Rate Options Valid Input Range Description 1U Min: Max: Step Size: 0.4688 M ...

  • TANDBERG E5714 - page 159

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-8 1 ST.TM .E10076. 3 Tx Bandwidth Factor Optio n To access the Tx Bandwidth Factor op ti on, press the Tx Ba ndwidt h Factor softkey in the Satellite Modulator Menu . This option i s used to calculate the Tx Bandwi dth based upon ...

  • TANDBERG E5714 - page 160

    Operating th e Equipment Locally Page 4-82 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Sat Deliv Freq Option To access the Sat Deli v Freq opti on, press the Sat Deliv Freq softkey in the Satellite Modulator Menu. Table 4.98: Sat Deliv Freq Options Valid Input Range Description Min: 0.0000 GHz Max: ...

  • TANDBERG E5714 - page 161

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-8 3 ST.TM .E10076. 3 Polaris ation Option To access the Polari sation opti on, press the Polarisation softke y in the Satellite Modulator Menu . Th is e na ble s t he po laris at ion of the s ate llite tr an sp on de r to be sp e ...

  • TANDBERG E5714 - page 162

    Operating th e Equipment Locally Page 4-84 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Frequency Option To access the Frequency option press the Fre quency softkey in the Satellite Modulator Menu . Table 4.103: Frequency Options Valid Input Range Description Min: Max: 950 MHz 1750 MHz Modulation Opt ...

  • TANDBERG E5714 - page 163

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-8 5 ST.TM .E10076. 3 Preset Pwr N orm Optio n Refer to Preset Pwr Norm Op tion on page 4-81 for detail s. Upconverter Power To access the Upconverter Power option, press the Up converter P o wer softkey in the Satellite Modulator ...

  • TANDBERG E5714 - page 164

    Operating th e Equipment Locally Page 4-86 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Bandwidth Option To access the Bandwidth opti on, press the Bandwidth softke y in the OFDM Modulator Menu . Table 4.104: Bandwidth Options Selected Option Description 6 MHz 6 MHz transmission bandwidth 7 MHz 7 MHz ...

  • TANDBERG E5714 - page 165

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-8 7 ST.TM .E10076. 3 Transmission Opt ion To access the Transmissi on option, press the Transmi ssion softkey in the OFDM Modulator Menu . Table 4.108: Transmission Options Selected Option Description 2k Mode OFDM Modulator uses ...

  • TANDBERG E5714 - page 166

    Operating th e Equipment Locally Page 4-88 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 4.11.11 Output Format = IP Streamer (3.1 and later) Own IP Address Option To access the Own IP Address opti on, press the Own IP Address softkey in th e IP Streamer Menu . This is the local IP address asso ciated ...

  • TANDBERG E5714 - page 167

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-8 9 ST.TM .E10076. 3 Multicast IP Address Opt ion This opti on is not used. Time To Live Option To access the Time To Li ve option, press the Ti m e To Live softkey in the IP Streamer Menu . This is the Time-to- Live setting as s ...

  • TANDBERG E5714 - page 168

    Operating th e Equipment Locally Page 4-90 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 4.12.3 Mux Output, With Remux Card To obtain an output when a Remux card is fi tted, set the opti ons in the foll owi ng menus: · Host Bit-rate Option on page 4-97 · Remux Mo dule menu – see Se ction 4.13.3, R ...

  • TANDBERG E5714 - page 169

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-9 1 ST.TM .E10076. 3 Setup Menu Mux Men u Shaded options are s howing s tatus and cannot be changed. Mux.... Remux Module.... 1.Serv ice 2 .... 2.Service (1).... up to 13.Ser vice 2 .... 1[Mdb].Se rvice.... up to 4[Mdb].Se rvice. ...

  • TANDBERG E5714 - page 170

    Operating th e Equipment Locally Page 4-92 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Setup Menu Mux Menu Shaded op tions are showing status and cannot be change d. Mux.. .. Remux Modu le.... 2.Service 2, 7 ... . 3.Program 2 (1).... up to xxxx.Servi ce 2 .... Packet Length On Air Bit-rate (188) Bit ...

  • TANDBERG E5714 - page 171

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-9 3 ST.TM .E10076. 3 4.12.6 Bit-rate (188) and Bit-rate (204) Option NOTE… If the Packet Length option is set to 188 bytes then only the Bit-rate (188) option is displayed. If the Packet Length option is set to 204 bytes then b ...

  • TANDBERG E5714 - page 172

    Operating th e Equipment Locally Page 4-94 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 4.12.9 FPGA Firmware This option i ndicates the versi on of th e FPGA Firmware. It i s for status onl y and cannot be changed. 4.12.10 RAS Firmware This option i ndicates the versi on of the RAS Firmware. It i s f ...

  • TANDBERG E5714 - page 173

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-9 5 ST.TM .E10076. 3 Enter up to seven di gits usi ng the keypad, then press the Enter softkey to accept the scrambling code. If less then seven digits are entered, they are prefixed with 0’s (zero) to give a seven digit code. ...

  • TANDBERG E5714 - page 174

    Operating th e Equipment Locally Page 4-96 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 To access the BISS 13 Key Entry option, press the BISS Key Entry softke y in th e Mux Menu . Th is e na ble s t he sc ra mblin g ke y u se d in BI SS K ey E nt ry scrambling mode to be set (see the Scramble Option ...

  • TANDBERG E5714 - page 175

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-9 7 ST.TM .E10076. 3 4.13 Remux 4.13.1 Introduction If the Remux option module M2/EOM2/REMUX is fitted, there is an add itio na l ite m in t he Mux Menu (see Figure 4.18 ) and a further Remux Module Menu and 1.Service Menu . 4.13 ...

  • TANDBERG E5714 - page 176

    Operating th e Equipment Locally Page 4-98 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 NOTE… If Intelligent mode is selected, the Action On PID Error option (see page 4-30 ) in the Setup/System/Advanced Menu must be set to Auto Correct. If Dumb mode is selected, the Action On PID Error option must ...

  • TANDBERG E5714 - page 177

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4-9 9 ST.TM .E10076. 3 Table 4.120: Output Options Selected Option Description Off The servic e is not incl uded in the output. On The servic e is incl uded in the output, unscrambled. On (RAS) The service i s included i n the outp ...

  • TANDBERG E5714 - page 178

    Operating th e Equipment Locally Page 4-100 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 Name Out Option To access the Name Out option press the Na me Out softkey in the 1.Service Menu . This option al l ows the service output name to be changed. Service Prov (In) Optio n NOTE… This option is on ...

  • TANDBERG E5714 - page 179

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -101 ST.TM .E10076. 3 Major Channel Option NOTE… This option is only shown in ATSC mode. To access the Major Channel opti on, press the M a jor Cha nne l softkey in the 2.Service Menu . T his en ab les th e ma j or c ha nn el t ...

  • TANDBERG E5714 - page 180

    Operating th e Equipment Locally Page 4-102 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 PMT PID Option NOTE… This option is status only for the Host En coder but can be changed for incoming services. To access the PMT PID option, press the PMT PID softkey in the 2.Service Menu . This shows the ...

  • TANDBERG E5714 - page 181

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -103 ST.TM .E10076. 3 ECM (CA) PID Option NOTE… This option is status only for the Host Encoder but can be changed for incoming services. Available from Build version 2.2.0 and later. To access the ECM (CA) PID option, press th ...

  • TANDBERG E5714 - page 182

    Operating th e Equipment Locally Page 4-104 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 Table 4.129: Audio (Type of Audio) Options Selected Option Description Min: 1 Max: 8190 (1FFEh) Step Size: 1 Data (Type of Data) Option NOTES… 1. This option is status only for the Host En coder but can be c ...

  • TANDBERG E5714 - page 183

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -105 ST.TM .E10076. 3 4.14 IRD Menu (3.1 and later) 4.14.1 Overview NOTE… This option is available in Build version 3.1.0 and later. The IRD Menu i s sel ected from the Setup Menu by pressing the IRD softkey. Th e m en u c on t ...

  • TANDBERG E5714 - page 184

    Operating th e Equipment Locally Page 4-106 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 Setup Menu IRD Menu IRD Mode IRD TS Source IRD Demod (If Fitte d).... Service List.. .. IRD V ide o.. .. IRD A udi o1.. .. IRD A udi o2.. .. IRD VBI.. .. IRD CA.... IRD Data.... IRD System Stat us.... IRD VBI ...

  • TANDBERG E5714 - page 185

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -107 ST.TM .E10076. 3 4.14.4 IRD Demod Menu Frequency Option To access the Frequenc y option, press the Freq uency softkey in the IRD Demod Menu . This val ue i s ei ther the L-Band freque ncy for the demodula tor to tune to if t ...

  • TANDBERG E5714 - page 186

    Operating th e Equipment Locally Page 4-108 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 Polaris ation Option To access the Polari sation opti on, press the Polarisation softke y in the IRD Demod Menu . Table 4.136: Polarisation Options Selected Option Description Horizontal If LNB power is enable ...

  • TANDBERG E5714 - page 187

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -109 ST.TM .E10076. 3 LNB Lo Freq Option To access the LNB Lo Freq option, press the LNB Lo Freq softkey in the IRD Demod Menu . Th is v alue s ho uld b e s et to th e L NB ’s low er loc al o s cillat or fr eq ue nc y. I f t he ...

  • TANDBERG E5714 - page 188

    Operating th e Equipment Locally Page 4-110 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 Status Only Options for the IRD Demod Menu The followi ng options are for stat us onl y and cannot be changed. · LNB Fault Status · Demod Status · Part Number · Code Version 4.14.5 Service List Menu To acc ...

  • TANDBERG E5714 - page 189

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -111 ST.TM .E10076. 3 525 Line Composite Option To acce ss the 525 Line Compos ite option, press the 525 Lin e Composit e softkey in the IRD Video Menu . Table 4.145: 525 Line Composite Options Selected Option Description 525 NTS ...

  • TANDBERG E5714 - page 190

    Operating th e Equipment Locally Page 4-112 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 EDH Enable Optio n To access the EDH Enable opti on, press the ED H Enab le softkey in the IRD Video Menu . This all ows the pass-through of Error Detection Hierarchy (EDH) to be either enabl ed or disabl ed. ...

  • TANDBERG E5714 - page 191

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -113 ST.TM .E10076. 3 4.14.7 IRD Audio 1 and Audio 2 Menus NOTE… The menu structures are identical for Audio Channel 1 and Audio Channel 2. Audio Stream This shows the currentl y sel ected audio stream . To access the Audi o St ...

  • TANDBERG E5714 - page 192

    Operating th e Equipment Locally Page 4-114 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 Table 4.153: Downmix Mode Options Selected Option Description Stereo Pair Dolby Pro Logic Stereo Mute State Opti on To access the Mute St ate option, p r ess the Mute State softkey in the IRD Audio Menu . The ...

  • TANDBERG E5714 - page 193

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -115 ST.TM .E10076. 3 4.14.8 IRD CA Menu Overview If the I RD is o pe ra ting in t ra ckin g mode, then the IRD CA menu has no options because the CA i s automati ca l ly confi gured to match the settings of the host Encoder. DSN ...

  • TANDBERG E5714 - page 194

    Operating th e Equipment Locally Page 4-116 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 4.14.9 IRD VBI Menu VITS Enable Option To access the VITS Enable opti on, press the VITS Enable softke y in the IRD VBI Menu . Table 4.156: VITS Enable Options Selected Option Description Disabled VITS test si ...

  • TANDBERG E5714 - page 195

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -117 ST.TM .E10076. 3 4.14.10 IRD Data Menu Async Stream Option To access the Async Stream opti on, press the Async Stream so ftkey in the IRD Data Menu . Th is is us ed to se lec t the asynchronous data stream to be decoded, fro ...

  • TANDBERG E5714 - page 196

    Operating th e Equipment Locally Page 4-118 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 Teletext Stream Option To access the Teletext Stream opti on, press the Teletext Str eam softkey in th e IRD Data Menu . Th is is us ed to se le ct t he T ele te xt s tr ea m t o be decoded, from those p r ese ...

  • TANDBERG E5714 - page 197

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -119 ST.TM .E10076. 3 Restore Default s To access the Restore Defa ults opti on, press the Restore Defaults softkey in the Error Masks Menu . This sets alarm, fa il and error messages to the factory defaults. Activ e Errors Error ...

  • TANDBERG E5714 - page 198

    Operating th e Equipment Locally Page 4-120 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 Th e E nc od er no rma lly h olds th e f ollo win g c on figu ra tio ns : · One Active Confi g urati on (it runs the Encoder) · Sixteen U ser confi gurati ons (in the User FLASH) · Sixteen Backup confi gura ...

  • TANDBERG E5714 - page 199

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -121 ST.TM .E10076. 3 4.17.5 Backup Configurations Backup FLASH stores a copy of each of the 16 user configurati ons when you select Store C o n f i g s in Backup , yo u will b e a sk ed fo r th e p as sw or d here. If unsure of ...

  • TANDBERG E5714 - page 200

    Operating th e Equipment Locally Page 4-122 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 Th is m en u pr ov ide s o pt ion s fo r lo ad ing and st or ing pre de fin ed configurati ons and updati ng and restoring backup confi gurations. 4.17.9 Load Active Config Option To access the Load Active Con ...

  • TANDBERG E5714 - page 201

    Operating th e Equipment Locally Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 4 -123 ST.TM .E10076. 3 4.17.13 Factory 525 Defaults Option This option enabl es the 16 user configurati ons to be overwri tten by the factory default settings for 525 line/29.97 Hz video ope ration. Press the Factory 525 Defau lts ...

  • TANDBERG E5714 - page 202

    Operating th e Equipment Locally Page 4-124 Inst ructi on Ma nua l: evol uti on 5000 E57xx DS NG and D ENG Voya ger Encoder ST.TM .E10076. 3 BLANK ...

  • TANDBERG E5714 - page 203

    Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page 5-1 ST.TM .E 10076. 3 Chapter 5 5. W eb Browser Interface Contents 5.1 Introduction ............................................................... 5-3 5.2 How to Set Up Internet Explorer For the Web Browser Interface .............................................. ...

  • TANDBERG E5714 - page 204

    Web B rowser Interf ace Page 5-2 Instr uction Manual: ev olution 5000 E57x x DSNG and DENG Voyag er Encoder ST.TM .E100 76. 3 BLANK ...

  • TANDBERG E5714 - page 205

    Web B rowser Interf ace Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page 5-3 ST.TM .E 10076. 3 5.1 Introduction There is a range of diagnostic and othe r utilities that can be accessed via a web browser, such as Internet Explor er. Bef ore these can be acces sed i t is important to ensure that the Internet Explo ...

  • TANDBERG E5714 - page 206

    Web B rowser Interf ace Page 5-4 Instr uction Manual: ev olution 5000 E57x x DSNG and DENG Voyag er Encoder ST.TM .E100 76. 3 Figure 5.2: Settings D ialog Box 4. For Check for new er ve rsio ns of stored pa g e s , sel ect Eve ry vi sit to the page or any changes made to th e pages will not be displayed. Click OK to save the changes and return to t ...

  • TANDBERG E5714 - page 207

    Web B rowser Interf ace Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page 5-5 ST.TM .E 10076. 3 6. Click LAN Settings to op en the Local Area Network (L AN) Settings dialog box (see Figure 5.4 ). Figure 5.4: Local Area N etwork (LAN) Settin gs Dialog Box 7. Click Advanced to open the Proxy Settings dialog box (se ...

  • TANDBERG E5714 - page 208

    Web B rowser Interf ace Page 5-6 Instr uction Manual: ev olution 5000 E57x x DSNG and DENG Voyag er Encoder ST.TM .E100 76. 3 8. In the Exceptions area type the I P address of the Encoder. 9. Click OK as many times as necessary to close all dialog boxes until only the Internet Expl orer wi ndow is open. For Internet Explorer versi on 4 the same sel ...

  • TANDBERG E5714 - page 209

    Web B rowser Interf ace Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page 5-7 ST.TM .E 10076. 3 Figure 5.7: Build Info – Version Numb ers Figure 5.8: Build Info - R elease Notes Option 2 , Tools 1 - displays a screen simil ar to: · Figure 5.9 when clicking Bandwi d t h Ca l cula tions, OFDM B i t-rate Calculat ...

  • TANDBERG E5714 - page 210

    Web B rowser Interf ace Page 5-8 Instr uction Manual: ev olution 5000 E57x x DSNG and DENG Voyag er Encoder ST.TM .E100 76. 3 Bandw i dth Calc ul ati o ns, OFD M Bit- ra te Ca lcul a tio n s - The Bit Rate Calculator (see Figure 5 . 9 ) allows you to enter various parameters and the optimal bit-rate (Mbit/s) is automat ically calculated for 204 byt ...

  • TANDBERG E5714 - page 211

    Web B rowser Interf ace Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page 5-9 ST.TM .E 10076. 3 Figure 5.11: Tools – OSD Toolkit Video Monitor - The Vid eo Moni tor (see Figure 5.12 ) displays the video input to the Encoder. Figure 5.12: Tools – V ideo Monit or Option 3 , Customer Support - has the contact in ...

  • TANDBERG E5714 - page 212

    Web B rowser Interf ace Page 5-10 Instruction Ma nua l: e v olutio n 5000 E57x x DSNG and DENG Voy ag er Encode r ST.TM .E100 76. 3 Figure 5.13: Backpla ne Modes Figure 5.14: Install ed Module s Option 6 , Licence d Feat ure s - shows a li st of all the features which are, and can be, enabled when the appro priate licence is purchased. Option 7 , S ...

  • TANDBERG E5714 - page 213

    Web B rowser Interf ace Instru c tio n Manual: ev o lution 5000 E57x x DSNG and DENG Voy ag er Encoder Page 5-11 ST.TM .E 10076. 3 Option 8 , Encoder Error s – shows a list of Activ e Errors, Mask ed Acti ve Errors and Latched Errors. Option 9 , Event Log - show s the ev ents and tests w hi ch have been performed since the Encoder was l a st swi ...

  • TANDBERG E5714 - page 214

    Web B rowser Interf ace Page 5-12 Instr uction Ma nua l: e v olutio n 5000 E57x x DSNG and DENG Voy ag er Encode r ST.TM .E100 76. 3 BLANK ...

  • TANDBERG E5714 - page 215

    Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 6-1 ST.TM .E10076. 3 Chapter 6 6. Preventive Maintenance and Fault-finding Contents 6.1 Introduction ............................................................... 6-3 6.2 Preventive Maintenance............................................ 6-3 6.2.1 Routine Inspec ...

  • TANDBERG E5714 - page 216

    Preve ntive Maintenanc e and F ault-find ing Page 6-2 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 BLANK ...

  • TANDBERG E5714 - page 217

    Preve ntive Maintenanc e and Fault-find ing Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 6-3 ST.TM .E10076. 3 6.1 Introduction Th is c ha pte r p ro vide s the s ch edu les an d in st ruc tio ns , w he re app lica ble , fo r routine i nspection, cleani ng and mai ntenance of the equi pment whi ch should be p ...

  • TANDBERG E5714 - page 218

    Preve ntive Maintenanc e and F ault-find ing Page 6-4 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 Replacement Parts When replacement parts are requi red, be sure the serv i ce technici an has used parts specifi ed by the manufacturer or whi ch have the same characteristi cs as the ori ginal part. ...

  • TANDBERG E5714 - page 219

    Preve ntive Maintenanc e and Fault-find ing Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 6-5 ST.TM .E10076. 3 6.4 Errors and Diagnostics Menu s – When to Use Them 6.4.1 Error Messages Figure 6.1: Finding the Errors Menu Investigate any run-time errors by pressi ng the Acti ve Errors softkey in the Errors M ...

  • TANDBERG E5714 - page 220

    Preve ntive Maintenanc e and F ault-find ing Page 6-6 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 Figure 6.2: Finding the Diagnostics Menu LCD Display Test Press the LCD Display softkey to access the option and then press any key to cycle through the test pa tterns and to return to the menu. Keyb ...

  • TANDBERG E5714 - page 221

    Preve ntive Maintenanc e and Fault-find ing Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 6-7 ST.TM .E10076. 3 Buzzer Test Press the Buzzer softkey to access the opti on which i mmediatel y causes a buzzer to sound. Pre ss any key (e xcept the Quit softkey) to turn the buzzer off. Press the Qu it softkey to r ...

  • TANDBERG E5714 - page 222

    Preve ntive Maintenanc e and F ault-find ing Page 6-8 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voya ger Encoder ST.TM .E10076. 3 2. Confirm that the equi pment hardware confi guration i s suitabl e for the purpose and has been correctly i nstall ed and connected (see Chapter 2, Installing the Equipment ). 3. Confirm that i nap ...

  • TANDBERG E5714 - page 223

    Preve ntive Maintenanc e and Fault-find ing Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 6-9 ST.TM .E10076. 3 Figure 6.3: Orientation of Fuse Carrier If the replacem ent fuse al so b l ow s, do not conti nue. Disconnect the equipment and contact Customer Servi ces for advi ce. 6.5.4 Video Fault-finding Fault ...

  • TANDBERG E5714 - page 224

    Preve ntive Maintenanc e and F ault-find ing Page 6-10 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 6.5.5 Audio Fault-finding If having problems when usi ng th e Dol by E Pass-through coding mode then refer to Annex G, Audio Modes , for information about using this mode. 6.5.6 Mux Fault-finding If th ...

  • TANDBERG E5714 - page 225

    Preve ntive Maintenanc e and Fault-find ing Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page 6-1 1 ST.TM .E10076. 3 6.8 Power Supply Problems/Green LED on Front Panel Unlit 6.8.1 Symptoms WARNING... DO NOT ATT EMPT TO SERVICE THE POWER SUPPLY UNI T AS OPENING OR REM OVING COVERS MAY EXPOSE DANGEROUS VOLT AGES OR ...

  • TANDBERG E5714 - page 226

    Preve ntive Maintenanc e and F ault-find ing Page 6-12 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table 6.4: Fans Not Working/Overheating Step Action If Result of Action is Yes… If Result of Action is No… 1 Check Fan Ro tation . Ins pect the fans located at the sides of the enclosure. Are the f ...

  • TANDBERG E5714 - page 227

    Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page A-1 ST.TM .E 10076. 3 Annex A A. Glossary The followi ng list covers most of the abbr eviations, acronyms and terms as used in TA NDB ER G Te lev is ion Li mit ed Ma nu als . A l l ter ms ma y no t b e inc lud ed in th is man ua l. m mM i c r o m e t r e (fo rmer ...

  • TANDBERG E5714 - page 228

    Glossary Page A-2 Instr uc tion Manual: ev o l utio n 5000 E57x x DSNG and DENG Voyag er Encoder ST.TM .E100 76. 3 B3ZS Bipola r with Thre e Zero Su bstit ution: A method of eliminati ng long zero s trings i n a transmiss ion. It is used to ensure a sufficient number of transitions to maintain system synchronisation when the us er data stream conta ...

  • TANDBERG E5714 - page 229

    Glossar y Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page A-3 ST.TM .E 10076. 3 Compressio n Reduction in the number of bi ts used to represent t he same informati on. For the purposes of a broadcast system, it is the proces s of reduci ng digital pic ture inform ation by dis carding redu ndant por tions of inf ...

  • TANDBERG E5714 - page 230

    Glossary Page A-4 Instr uc tion Manual: ev o l utio n 5000 E57x x DSNG and DENG Voyag er Encoder ST.TM .E100 76. 3 Earth Technical Earth : Ensures that all equi pment chass is within a r ack are at the s ame potenti al, usuall y by connecting a wir e between the Technical earth termi nal and a sui table point o n the rack. T his is s ometimes known ...

  • TANDBERG E5714 - page 231

    Glossar y Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page A-5 ST.TM .E 10076. 3 IF Intermediate F requency: Usually refers to the 70 MHz or 140 MHz outp u t of the Modulator in ca ble, satellite and terrestri al transmiss ion applic ations. Interf rame Codi ng Compress ion coding i nvolving c onsecutive frames. ...

  • TANDBERG E5714 - page 232

    Glossary Page A-6 Instr uc tion Manual: ev o l utio n 5000 E57x x DSNG and DENG Voyag er Encoder ST.TM .E100 76. 3 LVDS Low Volta ge Dif fere ntial Si gnal: LVDS is a generic mul ti-purpos e Interface st andard fo r high spe ed / low powe r data transmis sion. It was stan dardised in A NSI/TIA/EIA-6 44-1995 Standa rd (aka RS -644). Macr oblock A 16 ...

  • TANDBERG E5714 - page 233

    Glossar y Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page A-7 ST.TM .E 10076. 3 NVOD Near V ideo On De mand: Method of offering mul tiple showings of movies or events. The sh owings a re timed to start at set int ervals, dete rmined by the b roadcaster. Eac h showing of a movie o r event can be s old to subs cr ...

  • TANDBERG E5714 - page 234

    Glossary Page A-8 Instr uc tion Manual: ev o l utio n 5000 E57x x DSNG and DENG Voyag er Encoder ST.TM .E100 76. 3 Programme A linking of one or mor e events under the control of a bro adcaster. F or example, footb all match, ne ws, film s how. In the MPEG-2 conc ept, the coll ection of ele mentary strea ms compris ing the pro gramme, hav e a commo ...

  • TANDBERG E5714 - page 235

    Glossar y Instru c tio n Manual: ev o lution 5000 E5 7x x DSN G and DENG Voyag er Enco der Page A-9 ST.TM .E 10076. 3 SI Service Info rmation: Digital information describing the deliver y system, content a nd scheduling (timing) of broadcast data s treams. DVB -SI data provides information to enable th e IRD to automatic ally demulti plex and decod ...

  • TANDBERG E5714 - page 236

    Glossary Page A-10 Instru c tio n Manual: ev olution 5000 E57x x DSNG and DENG Voy a g er Encoder ST.TM .E100 76. 3 UART Universal A synchro nous Receiver Tr ansmitter : A device prov iding a se rial interface f or transmi tting and receiving data. UHF Ultra High Frequenc y: A portion of the elec tromagneti c spectrum cove ring 300 MHz to 3000 MHz ...

  • TANDBERG E5714 - page 237

    Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -1 ST.TM .E10076. 3 Annex B B. T echnical Specification Contents B.1 Inputs ...................................................................... B-3 B.1.1 Video............................................................. B-3 SDI .............................. ...

  • TANDBERG E5714 - page 238

    Technical Sp ecific atio n Page B- 2 In struct ion M anu al: evolut ion 5000 E 57xx DSNG a nd DE NG Voyager E ncoder ST.TM .E10076. 3 List of Tables Table B.1: Serial Di gital Video Speci fication ................................. B-3 Table B.2: H SYNC Specific ation .................................................. B-3 Table B.3: Analogue Video S ...

  • TANDBERG E5714 - page 239

    Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -3 ST.TM .E10076. 3 B.1 Inputs B.1.1 Video SDI Table B.1: Serial Digital Video Specification Item Specification Safety status SELV Connector designati on SDI IN Connector type 75 W BNC female socket Input standard (UK/EC) Input standar ...

  • TANDBERG E5714 - page 240

    Technical Sp ecific atio n Page B- 4 In struct ion M anu al: evolut ion 5000 E 57xx DSNG a nd DE NG Voyager E ncoder ST.TM .E10076. 3 Analogue Video Specificatio n Table B.3: Analogue Video Specification Item Specification Analogue input 625 li ne composite PAL-B, -D, -G, -H, -I 525 line compos ite NTSC-M, PAL-M as spec ified in IT U-R report 624-4 ...

  • TANDBERG E5714 - page 241

    Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -5 ST.TM .E10076. 3 Pattern Item Specification VITS Line 17 Pulse/bar K-rating ± 0.5% KF VITS line 17 P-B ratio 99% - 101% VITS Line 17 Chrom/lum delay ± 20 ns VITS Line 17 Chrom/lum gain 95 – 105% 100% Luma Ramp Luma noise wei ght ...

  • TANDBERG E5714 - page 242

    Technical Sp ecific atio n Page B- 6 In struct ion M anu al: evolut ion 5000 E 57xx DSNG a nd DE NG Voyager E ncoder ST.TM .E10076. 3 International Television St andards Table B.7 shows televi sion standards appropri ate to the Encoder. Table B.7: International Television Standards As indicated in Menus M M B G H I D Region USA/Japan ----- Europe / ...

  • TANDBERG E5714 - page 243

    Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -7 ST.TM .E10076. 3 NOTES… 1. Refer to Annex G, Audio Modes when using these coding standards. 2. Problems may be experienced with some Receivers if the Encoder and Decoder are not using the same version of SMPTE 302M specification, ...

  • TANDBERG E5714 - page 244

    Technical Sp ecific atio n Page B- 8 In struct ion M anu al: evolut ion 5000 E 57xx DSNG a nd DE NG Voyager E ncoder ST.TM .E10076. 3 Item Specification Noise RMS L A-weighted 7 0 d B Unweighted 70 dB User Levels @ 1 kHz (0 to 50 d B) K +10 dB ±0. 2 dB -10 dB ±0. 2 dB -20 dB ±0. 2 dB -30 dB ±0. 2 dB -40 dB ±0. 3 dB -50 dB 0 to - 2 d B Phase @ ...

  • TANDBERG E5714 - page 245

    Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -9 ST.TM .E10076. 3 B.3 Outputs B.3.1 IF Outputs (1U, E5714) Table B.12: IF OUT MAIN Specification (1U, E5714) Item Specification Safety status: S EL V Connector designation: IF OUT MAIN Connector type: BNC, female 75 W Output impedanc ...

  • TANDBERG E5714 - page 246

    Technical Sp ecific atio n Page B- 10 Instruction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table B.13: IF Monitor Output Specification (1U, E5714) Item Specification Safety status: S EL V Connector designation: IF OUT MONITOR Connector type: BNC, female 75 W This connec tor is normall y dedicated to output th ...

  • TANDBERG E5714 - page 247

    Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -1 1 ST.TM .E10076. 3 Table B.15: IF OUT MONITOR Specification (E5740-IF) Item Specification Safety status: SELV Connector type: BNC female 75 W Connector designation: IF OUT MONITO R Output impedance: 75 W Output power: - 20 dB ± 2 d ...

  • TANDBERG E5714 - page 248

    Technical Sp ecific atio n Page B- 12 Instruction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table B.17: L-Band Monitor Output Specification (E5740-Lband) Item Specification Safety Status: SELV Connector Type: F -type Female Connector Designation: L-Band Out Monitor Output Impedance: 75 W Output Power: - 30 dB ...

  • TANDBERG E5714 - page 249

    Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -1 3 ST.TM .E10076. 3 B.4 Control and Monitoring B.4.1 Remote Control - Ethernet 1 and 2 Table B.21: Ethernet Specification Item Specification Safety status SELV Connector designation ETHERNET #1 and ETHERNET#2 Connector type 8-way RJ- ...

  • TANDBERG E5714 - page 250

    Technical Sp ecific atio n Page B- 14 Instruction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 B.4.6 RS-422 Data This provides an RS-422 sync hronous, serial communications data input interface. Table B.24: RS-422 Data Specification Item Specification Safety status SELV Type IT U-T V.11 (RS-422), sync hronous ser ...

  • TANDBERG E5714 - page 251

    Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -1 5 ST.TM .E10076. 3 B.5 Power Supply B.5.1 AC Power Input This equipment is fitted with an wi de-ranging power supply. It is suitabl e for supply voltages o f 100-120 Vac - 10% +6% or 220-240 V ac -10% +6% at 50/60 Hz nominal. Table ...

  • TANDBERG E5714 - page 252

    Technical Sp ecific atio n Page B- 16 Instruction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 B.5.2 DC Power Input The power unit used i n the Encoder is a soft-start type designed for use on dc suppli es havi ng a negativ e or posi tive earth (vehi cle chassi s) v ol tage supply in the range 12 to 36 Vdc. Table ...

  • TANDBERG E5714 - page 253

    Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -1 7 ST.TM .E10076. 3 B.7 Environm ental Con ditions Table B.28: Environmental Specification Item Specification Operational Temperature -10 ° C to +50 ° C (14 ° F to 122 ° F) ambi ent with free air-flow Over temperature alarm gener ...

  • TANDBERG E5714 - page 254

    Technical Sp ecific atio n Page B- 18 Instruction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 B.8.2 EMC 2 The equipm ent has b een d esi gned and tested to m eet the f ol l owi ng: EN 55022 and AS/N ZS 3548 European Australi a and New Zealand Emissi on Standard Limits and methods of measuremen t of radio frequen ...

  • TANDBERG E5714 - page 255

    Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -1 9 ST.TM .E10076. 3 B.8.4 CE Marking The CE mark is affixed to indicate compli ance with the followi ng directives: 89/336/EEC of 3 M ay 1989 on the approximation of the laws of the Me mb er St ate s re latin g t o e lec tr om agn et ...

  • TANDBERG E5714 - page 256

    Technical Sp ecific atio n Page B- 20 Instruction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 B.10 Option Modules B.10.1 M2/EOM2/AUDLIN Additional Audio and Linear PCM Option Module See Section B.1.2, Audio fo r details. B.10.2 M2/EOM2/DAT RS-232 and RS-422 Data Input Option Asynchronous Dat a Input A 9-way, D-t ...

  • TANDBERG E5714 - page 257

    Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -2 1 ST.TM .E10076. 3 B.10.3 M2/EOM2/REMUX Remux Option Module Connector s NOTE… The M2/EOM2/REMUX Remux Option Module is s upported by Encoder software version 2.2.0 and later. Table B.32: DVB ASI In 1, 2 and 3 Connector Item Specif ...

  • TANDBERG E5714 - page 258

    Technical Sp ecific atio n Page B- 22 Instruction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Table B.35: DVB ASI Out 1 - LED Indications Item Specification Red LED On Output di sabled Off O utput enabled Green LED Off O utput not in use Flash ( 1: 3 ma rk: sp ace ) 188 byte packets output Flash ( 3: 1 ma rk: sp ...

  • TANDBERG E5714 - page 259

    Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -2 3 ST.TM .E10076. 3 B.10.4 M2/EOM2/XLR , XLR Expander Card Option NOTE… The M2/EOM2/XLR, XLR Ex pander Card Option is supported by Encoder software version 3.0 and later. Table B.36: Analogue and Digital Audio (XLR Expander Card) I ...

  • TANDBERG E5714 - page 260

    Technical Sp ecific atio n Page B- 24 Instruction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 B.10.5 M2/EOM2/DEC, SD Decoder Card Option NOTE… The M2/EOM2/DEC, SD Decoder Card Option is supported by Encoder software version 3.1 and later. Table B.37: ASI Output (SD Decoder) Item Specification Safety Status: SE ...

  • TANDBERG E5714 - page 261

    Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -2 5 ST.TM .E10076. 3 Table B.40: Audio Output (SD Decoder) Item Specification Safety Status: SELV Connector Type: 15-way D-Type Femal e Analogue Output Nominal Output Impedance: 50 W Clip Level: +6 dBm to +18 dBm Sampling Rate: Same a ...

  • TANDBERG E5714 - page 262

    Technical Sp ecific atio n Page B- 26 Instruction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 B.10.6 M2/EOM2/QPSKDEMOD, QPSK Demodulator Card Option NOTE… The M2/EOM2/QPSKDEMOD, QPSK Demodulator Card Option is supported by Encoder software version 3.1 and later. Table B.42: IF In (QPSK Demodulator) Item Specif ...

  • TANDBERG E5714 - page 263

    Technical Sp ecific atio n Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page B -2 7 ST.TM .E10076. 3 B.10.7 M2/EOM2/SATDEMOD, 16QAM Demodulator Card Option NOTE… The M2/EOM2/SATDEMOD, 16QA M Demodulator Card Option is supported by Encoder software version 3.1 and later. Table B.44: L-band Inputs (16QAM Demodula ...

  • TANDBERG E5714 - page 264

    Technical Sp ecific atio n Page B- 28 Instruction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 BLANK ...

  • TANDBERG E5714 - page 265

    Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page C-1 ST.TM .E10076. 3 Annex C C. Predefined User Configurations Contents C.1 Introduction ............................................................... C-3 C.2 525/625 Line Default Settings ................................... C-3 C.3 General Default Settings .... ...

  • TANDBERG E5714 - page 266

    Predefined User Configurati ons Page C-2 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 BLANK ...

  • TANDBERG E5714 - page 267

    Predefined User Configurati ons Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page C-3 ST.TM .E10076. 3 C.1 Introduction There are sixteen p r ed ef i ned user confi gurati ons. These are a q ui ck and easy way to confi gure the Encoder wi thout having to enter i ndivi dual parameters. C.2 525/625 Line De faul t S ...

  • TANDBERG E5714 - page 268

    Predefined User Configurati ons Page C-4 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Module Parameter Default Value Output M ode Satellite Setup Password Off Displ ay Errors Yes LCD Brightness Medium SNMP Control During Initi alisati on No Reply System Type Local Action on PID Error Auto Correct MEM ...

  • TANDBERG E5714 - page 269

    Predefined User Configurati ons Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page C-5 ST.TM .E10076. 3 Module Parameter Default Value Ident Text Ident Mode Ident Text Foreground Col our Whi te Ident Text Background Col our Bl ue Ident Text Transl ucence Semi -translucent VBI: Teletext Enabl e (shortcut) On Telete ...

  • TANDBERG E5714 - page 270

    Predefined User Configurati ons Page C-6 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Module Parameter Default Value Language (R) E nglish Clip Level 18 dB PID 0x100 - 0x105 Termination 20 k Ω Auto Lip Sync On Lip Sync Delay 111 ms Lip Sync Offset 0 ms Audio ( Dolby D igit al ( AC- 3) ) : Bit-rate ...

  • TANDBERG E5714 - page 271

    Predefined User Configurati ons Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page C-7 ST.TM .E10076. 3 C.4 Predefined User Configurations The predefi n ed user confi gurati ons have the same settings as Table C.2 except for those differences shown in Tabl e C .3. Table C.3: Predefined User Configurations Configur ...

  • TANDBERG E5714 - page 272

    Predefined User Configurati ons Page C-8 Instru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Configuration Number Service Na me Variable Value 11 Mega Lo w Delay 6 MHz Video Bit-rate 2 Mbi t/s Video Compression Mode Mega Low Delay Video Profile/Level MP@ML GOP Structure IP 12 Mega Lo w Delay 7.5 MHz Video B ...

  • TANDBERG E5714 - page 273

    Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page D-1 ST.TM .E10076. 3 Annex D D. Language Abbreviations Languages are shown in al phabeti cal order. LANGUAGE ABBREVIATION AFRIKAANS AFR ALBANIAN ALB ARABIC ARA BASQUE BAQ BRETON BRE BULGARIAN BUL CHINESE CHI CZECH CZE DANISH DAN DUTCH DUT ENGLISH ENG ESTONIAN EST ...

  • TANDBERG E5714 - page 274

    Language A b brev iations Page D- 2 I nst ructi on Ma nual : evolu tion 5000 E57xx DSN G and D ENG Voya ger Encoder ST.TM .E10076. 3 The followi ng non-ISO 1 languages are supported. NOTE… Only applicable for a transport stream going to an Alteia Receiver. REFERENCE ABBREVIATION MAIN ONE AUX TWO INTERNATIONAL SO UND INT AUDIO 1 AAA AUDIO 2 AAB AU ...

  • TANDBERG E5714 - page 275

    Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page E-1 ST.TM .E10076. 3 Annex E E. Creating and Downloading a Logo Contents E.1 Introduction ............................................................... E-3 E.2 Summary of Features................................................ E-3 E.3 OSD Programs Built Into th ...

  • TANDBERG E5714 - page 276

    Creating and Do wnloading a Lo go Page E- 2 In stru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 BLANK ...

  • TANDBERG E5714 - page 277

    Creating and Do wnloading a Lo go Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page E-3 ST.TM .E10076. 3 E.1 Introduction Th e E nc od er inc lude s a lo go o ve rla y fa cilit y w he re by a n ima ge ca n b e ov er laid o nt o t he ac tive vid eo pr ior to en co din g. T his en ab les br oa dca st er s to tradem ...

  • TANDBERG E5714 - page 278

    Creating and Do wnloading a Lo go Page E- 4 In stru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Figure E.1: Web Browser Interface The dial ogue box, see Figure E.2 , will be dis play ed . Figure E.2: File Download Dialogue Box Cli ck i ng on opti on Open this file from its curre nt location and Clic king O ...

  • TANDBERG E5714 - page 279

    Creating and Do wnloading a Lo go Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page E-5 ST.TM .E10076. 3 Figure E.3: Files for OSD Creator and Loader E.4 Creating a Logo Using OSD Creator Osd Creator ( creator.exe ) is a n ap plic at ion fo r cr ea tin g lo go file s ( .o sd format) for use with the Osd Loader ap ...

  • TANDBERG E5714 - page 280

    Creating and Do wnloading a Lo go Page E- 6 In stru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 An ex amp le o f a log o is sh ow n in Figure E.4 . Figure E.4: OSD Creator Screen Showing Example Logo E.5.2 Loading a .bmp File Select File/Open from the menu, and choos e a file wi th a .bmp extension. Th e i ...

  • TANDBERG E5714 - page 281

    Creating and Do wnloading a Lo go Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page E-7 ST.TM .E10076. 3 Osd Creator use s a colour palette with a maximum of 256 entries. Each pixe l in t he imag e is ma ppe d t o a n e nt ry in th e p ale tte , w hic h h old s a v alu e for the red, gree n and blue an d transpar ...

  • TANDBERG E5714 - page 282

    Creating and Do wnloading a Lo go Page E- 8 In stru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 Clic k th e K ey File toolbar button. Select the key file . T he inacti ve area of the image shoul d now be transparent (background-coloured). Change the background colour to verify that the correct area is tran ...

  • TANDBERG E5714 - page 283

    Creating and Do wnloading a Lo go Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page E-9 ST.TM .E10076. 3 E.6 Downloading a Logo Using OSD Loader The Osd Loader app lica tio n ( os d. ex e) is u se d f or do wnlo ad ing logo ( .o sd) file s t o t he Enc o der an d c on tro lling wh ich are dis pla ye d. The applic ...

  • TANDBERG E5714 - page 284

    Creating and Do wnloading a Lo go Page E- 10 In struct ion M anu al: evolut ion 5000 E57xx D SNG an d DEN G Voyager En coder ST.TM .E10076. 3 The Resolution Mode must be set to match th e video resol uti on b ei ng used. This ad justs the p rev iew screen to the di mensi ons of the acti ve video. Table E.1: Resolution Modes Resolution Mode Video St ...

  • TANDBERG E5714 - page 285

    Creating and Do wnloading a Lo go Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page E-1 1 ST.TM .E10076. 3 576 Lines 1 720 720 P ixel s Digita l Activ e Pictur e 702 Pix els Analogu e Activ e Pict ure Pixel 1 2 Line Fiel d 23 336 337 338 24 25 623 310 OSD Load er C o-ord inates (85 8,619) OSD Loader C o-ordin ate ...

  • TANDBERG E5714 - page 286

    Creating and Do wnloading a Lo go Page E- 12 In struct ion M anu al: evolut ion 5000 E57xx D SNG an d DEN G Voyager En coder ST.TM .E10076. 3 E.7.3 Show and Hide Regions The Download button defines a Region in the Encoder, which remains until the Encoder is turned off, the Remove but ton is c lic ked , o r t he Region i s Download ed again. The Reg ...

  • TANDBERG E5714 - page 287

    Creating and Do wnloading a Lo go Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page E-1 3 ST.TM .E10076. 3 E.8 Fault-finding If there appears to be a problem creating or downloading a logo check the fo llow ing: · If the Communi cati ons box reads "Error Creati ng Socket", there may be a problem with t ...

  • TANDBERG E5714 - page 288

    Creating and Do wnloading a Lo go Page E- 14 In struct ion M anu al: evolut ion 5000 E57xx D SNG an d DEN G Voyager En coder ST.TM .E10076. 3 BLANK ...

  • TANDBERG E5714 - page 289

    Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page F-1 ST.TM .E10076. 3 Annex F F. Band Plans Contents F.1 Channels and Centre Frequencies ........................... F-3 List of Tables Table F.1: Australi a ....................................................................... F-3 Table F.2: Europe VHF ......... ...

  • TANDBERG E5714 - page 290

    Band Plans Page F- 2 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voyager Encoder ST.TM .E10076. 3 BLANK ...

  • TANDBERG E5714 - page 291

    Band Plans Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Pag e F -3 ST.TM .E10076. 3 F.1 Channels and Centre Frequencies The Output Menu has opti ons cal led Band Plan and Channel (see Chapter 4, Operating the Equipment Locally ). Once a country has been selected i n the Band Plan option then the re quir ed ch an ...

  • TANDBERG E5714 - page 292

    Band Plans Page F- 4 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voyager Encoder ST.TM .E10076. 3 Table F.2: Europe VHF UHF Channel Centre Frequency in MHz UHF Channel Centre Frequency in MHz E 2 50.500 E 8 198.500 E 3 57.500 E 9 205.500 E 4 64.500 E 10 212.500 E 5 177.500 E 11 219.500 E 6 184.500 E 12 226.500 E 7 191.500 Table F ...

  • TANDBERG E5714 - page 293

    Band Plans Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Pag e F -5 ST.TM .E10076. 3 Table F.6: New Zealand UHF Channel Centre Frequency in MHz UHF Channel Centre Frequency in MHz 1 47.500 6 191.500 2 57.500 7 198.500 3 64.500 8 205.500 4 177.500 9 212.500 5 184.500 10 219.500 Table F.7: China UHF Channel Centre F ...

  • TANDBERG E5714 - page 294

    Band Plans Page F- 6 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voyager Encoder ST.TM .E10076. 3 Table F.9: Ireland UHF Channel Centre Frequency in MHz UHF Channel Centre Frequency in MHz I A 48.500 I F 194.000 I B 56.500 I G 202.000 I C 64.500 I H 210.000 I D 178.000 I J 218.000 I E 186.000 Table F.10: South Africa UHF Channel ...

  • TANDBERG E5714 - page 295

    Band Plans Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Pag e F -7 ST.TM .E10076. 3 Table F.13: Japan UHF Channel Centre Frequency in MHz UHF Channel Centre Frequency in MHz UHF Channel Centre Frequency in MHz UHF Channel Cent re Frequency in MHz J 1 93.000 18 503.000 35 605.000 52 707.000 J 2 99.000 19 509.000 3 ...

  • TANDBERG E5714 - page 296

    Band Plans Page F- 8 Inst ructi on Ma nua l: evol uti on 5000 E57xx D SNG an d DENG Voyager Encoder ST.TM .E10076. 3 Table F.15: CCIR 2 UHF Channel Centre Frequency in MHz UHF Channel Centre Frequency in MHz UHF Channel Centre Frequency in MHz 21 474.000 38 610.000 55 746.000 22 482.000 39 618.000 56 754.000 23 490.000 40 626.000 57 762.000 24 498. ...

  • TANDBERG E5714 - page 297

    Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page G-1 ST.TM .E10076. 3 Annex G G. Audio Modes Contents G.1 Analogue Audio ........................................................ G-3 G.2 Digital Audio ............................................................. G-3 G.3 Embedded Audio on the SDI.................. ...

  • TANDBERG E5714 - page 298

    Audio Modes Page G- 2 Instruct ion M anu al: evolut ion 5000 E 57xx DSNG an d DEN G Voyager En coder ST.TM .E10076. 3 BLANK ...

  • TANDBERG E5714 - page 299

    Audio Modes Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page G-3 ST.TM .E10076. 3 G.1 Analogue Audio Figure G.1 shows the coding methods that may be used with the anal ogue audio input. Analogue Audio Code to Li nea r PCM Linear PCM Internal Codi ng MUSICAM Dolby (AC-3) Independent of Encoder Cloc k Source Figur ...

  • TANDBERG E5714 - page 300

    Audio Modes Page G- 4 Instruct ion M anu al: evolut ion 5000 E 57xx DSNG an d DEN G Voyager En coder ST.TM .E10076. 3 G.3 Embedded Audio on the SDI Figure G.3 shows the audio signal flow on the Base Board. Whi le si x audio stereo pairs are availabl e, only two stereo pairs can be processed by the Base Board at any one time. Audio can be embedded o ...

  • TANDBERG E5714 - page 301

    Audio Modes Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page G-5 ST.TM .E10076. 3 4:1 4:1 Grou p 1 Grou p 2 Grou p 3 Grou p 4 Grou p 1 Grou p 2 Grou p 3 Grou p 4 SDI Embedded 1 SDI Embedded 2 Audio Router Stereo Pair A SDI Embedded 4 De-embedd e r 1 De-embedd e r 2 Interface and Conversion Stereo Pair B Audio Ch ...

  • TANDBERG E5714 - page 302

    Audio Modes Page G- 6 Instruct ion M anu al: evolut ion 5000 E 57xx DSNG an d DEN G Voyager En coder ST.TM .E10076. 3 BLANK ...

  • TANDBERG E5714 - page 303

    Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page H-1 ST.TM .E10076. 3 Annex H H. Error Messages Contents H.1 Introduction ............................................................... H-3 H.2 Dealing with Error Messages .................................... H-3 H.3 General Errors................................ ...

  • TANDBERG E5714 - page 304

    Error Messages Page H- 2 In struct ion M anu al: evolut ion 5000 E 57xx DSNG a nd DE NG Voyager E ncoder ST.TM .E10076. 3 BLANK ...

  • TANDBERG E5714 - page 305

    Error Messages Page H- 3 In struct ion M anu al: evolut ion 5000 E 57xx DSNG a nd DEN G Voyager En coder ST.TM .E10076. 3 H.1 Introduction WARNING… DO NOT REMOVE THE COVERS OF THIS EQUIPMENT. HAZ ARDOUS VOLTAGES ARE PRESENT WITHIN THIS EQUIPMENT AND MAY BE EXPOSED IF THE COVERS ARE REM OVED. ONLY TANDBERG TELEVISION TRAINED AND APPRO VED SERVICE ...

  • TANDBERG E5714 - page 306

    Error Messages Page H- 4 In struct ion M anu al: evolut ion 5000 E 57xx DSNG a nd DE NG Voyager E ncoder ST.TM .E10076. 3 H.3 General Errors Table H.1: General Error Messages Err or Message Action to Take LCD Not Found Temp Sensor No Pulse Temp Sensor Bad CRC Temp Sensor Bad Data Temp Sensor Busy Temp Sensor Comms PSU Sensor Real Time Cl ock Ethern ...

  • TANDBERG E5714 - page 307

    Error Messages Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page H-5 ST.TM .E10076. 3 H.4 Video Source Related Errors Table H.2: Video Source Error Messages Err or Message Action to Take Comms Error P ower Encoder off, then check that the Base Board i s firmly s eated in the chassis . Do this by firml y pressing ...

  • TANDBERG E5714 - page 308

    Error Messages Page H- 6 In struct ion M anu al: evolut ion 5000 E 57xx DSNG a nd DE NG Voyager E ncoder ST.TM .E10076. 3 H.5 VBI Related Errors Table H.3: VBI Error Messages Err or Message Action to Take Duplicate VBI PID Invalid VBI PID Duplicate Tel etext PID Invalid Teletext PID Check the Encoder confi guration. Closed Caption (Li ne 21) Closed ...

  • TANDBERG E5714 - page 309

    Error Messages Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page H-7 ST.TM .E10076. 3 H.8 Video Encoder Related Errors Table H.6: Video Encoder Error Messages Err or Message Action to Take Comms Error Config Update VCM Stopped Power Encoder off, then check that the Bas e Board is firmly seated in the chassis . Do ...

  • TANDBERG E5714 - page 310

    Error Messages Page H- 8 In struct ion M anu al: evolut ion 5000 E 57xx DSNG a nd DE NG Voyager E ncoder ST.TM .E10076. 3 Err or Message Action to Take Level Clippi ng Left Level Cli pping Right Audio input level on the reported channel is too hi gh and is being cl ipped. Reduce the audio input lev el. Embedded Source 1 Embedded Source 2 Embedded S ...

  • TANDBERG E5714 - page 311

    Error Messages Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page H-9 ST.TM .E10076. 3 H.11 Remux Related Errors Table H.9: Remux Error Messages Err or Message Action to Take Overflow On Input 1 Overflow On Input 2 Overflow On Input 3 Reduce incomi ng bit-rate. Overflow Motherboard O/P Reduce i ncoming bit-rate of ...

  • TANDBERG E5714 - page 312

    Error Messages Page H- 10 Instru ction Man ual : evolu tion 5000 E57xx DSNG a nd DE NG Voyager E ncoder ST.TM .E10076. 3 BLANK ...

  • TANDBERG E5714 - page 313

    Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG Voy ager Enc o der Page I-1 ST.TM .E10076. 3 Annex I I. Accuracy of Frequency Sources This equipment is based around IS O/IEC 13818 spe cificati ons (commonly kno wn as MP EG -2) an d w ithin th es e s pe c ifica tio ns all t iming is d er ive d from a 27 MHz system cl ock. The sy stem c ...

  • TANDBERG E5714 - page 314

    Accuracy of Frequency Sources Page I- 2 Instruc tion Man ual: evolut ion 5000 E 57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 BLANK ...

  • TANDBERG E5714 - page 315

    Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG V o yage r Enc o der Page J-1 ST.TM .E10076. 3 Annex J J. Use of Remux Card in ASTC Contents J.1 Remux Card In ATSC With Internal PSIP ................. J-3 J.2 Remux Card In ATSC With External PS IP ................ J-3 ...

  • TANDBERG E5714 - page 316

    Use of Remu x Card in ASTC Page J -2 In stru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 BLANK ...

  • TANDBERG E5714 - page 317

    Use of Remu x Card in ASTC Page J -3 In struc tion Man ual: evolut ion 5000 E 57xx DSNG a nd DE NG Voyager E ncoder ST.TM .E10076. 3 J.1 Remux Card In ATSC With Inte rnal P S IP The Encoder automaticall y remuxes ATSC streams arri ving at i ts inputs, as in DVB. The Encod er uses the P AT (P rogram Associ ati on Table) and PMT (Program Map Table) t ...

  • TANDBERG E5714 - page 318

    Use of Remu x Card in ASTC Page J -4 In stru ction Man ual : evolu tion 5000 E57xx DSNG and DE NG Voyager E ncoder ST.TM .E10076. 3 In th is c on figu ra tio n th e E nc od er ge nerates the PAT, CAT and PMT for all pro gr am s bu t it is t he re sp on sibilit y o f t he us er to p ro vid e a ll the PS IP fo r the associated programs. Any programs ...

  • TANDBERG E5714 - page 319

    Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG V o yage r Enc o der Page K-1 ST.TM .E10076. 3 Annex K K. EDH Capability for E57xx Encoders Contents K.1 EDH Capability for E57xx Encoders.......................... K-3 List of Tables Table K.1: EDH Capability Matr ix for E57xx Encoder s.................. K-3 ...

  • TANDBERG E5714 - page 320

    EDH Capab ility f or E5 7xx Enc o der s Page K- 2 In struct ion M anu al: evoluti on 5000 E57xx D SNG an d DENG Voyager Encoder ST.TM .E10076. 3 BLANK ...

  • TANDBERG E5714 - page 321

    EDH Capab ility f or E5 7xx Enc o der s Instruction Manual: e v olution 5 0 00 E5 7 xx DS NG and DENG V o yage r Enc o der Page K-3 ST.TM .E10076. 3 K.1 EDH Capability for E57 xx Encoders Table K. 1 con ta ins ED H c apa bilit y fo r d iffe re nt mu x fir mwa re ve rs ion s. To find the mux firmware version fo r a particul ar Encoder refer to Summa ...

  • TANDBERG E5714 - page 322

    EDH Capab ility f or E5 7xx Enc o der s Page K- 4 In struct ion M anu al: evoluti on 5000 E57xx D SNG an d DENG Voyager Encoder ST.TM .E10076. 3 BLANK ...

  • TANDBERG E5714 - page 323

    Instructio n Manual: e v o lution 50 0 0 E57 x x DSNG and DENG V oyag e r Encode r Inde x -1 ST.TM .E10076. 3 Indexes Th is s ec tio n is sp lit in to two pa rt s. T he fir st is t he General Inde x and the second i s devoted to Setu p Menus and Associated Option s . The followi ng conventions are used i n this manual : a page number entry i n bold ...

  • TANDBERG E5714 - page 324

    Indexes Index-2 Inst ructi on Ma nua l: evolu tion 5000 E57xx DSN G and D ENG Voya ger Encoder ST.TM .E10076. 3 B background colour option, 4-34 backup configurations, 4-120 band plan option, 4-72 band plans, F-3, G-4 countries, F-3 manual option, F-3 bandwidth option, 4-45 , 4-73 , 4-86 basic interoperable scrambling system (BISS), 3-5 mode 1, 3-6 ...

  • TANDBERG E5714 - page 325

    Indexes Instructio n Manual: e v o lution 50 0 0 E57 x x DSNG and DENG V oyag e r Encode r Inde x -3 ST.TM .E10076. 3 dolby digital ac-3, 1-12 dolby srnd mode option, 4-60 DST end date ATSC, 4-21 DST start date ATSC, 4-21 dynamic range option, 4-62 E earth protective, 2-8 technical, 2-8, 2-13 earthing, 2-7, 2-9 ECM (CA) PI D option, 4-102 edh capab ...

  • TANDBERG E5714 - page 326

    Indexes Index-4 Inst ructi on Ma nua l: evolu tion 5000 E57xx DSN G and D ENG Voya ger Encoder ST.TM .E10076. 3 changing from the front panel menus, 2-22 methods of changing, 2-21 IP address option, 2-22 , 4-24 ip output card option, 3-27 IRD mode option, 4-104 IRD ts source option, 4-104 K keyboard lock (softkeys), 4-13 keypad functions, 4-9 how t ...

  • TANDBERG E5714 - page 327

    Indexes Instructio n Manual: e v o lution 50 0 0 E57 x x DSNG and DENG V oyag e r Encode r Inde x -5 ST.TM .E10076. 3 option modules, B-20 16qam demodulator option, 3-26 additional audio input module, 3-6 basic interoperable scrambling system (BISS), 3-5 hardware, 3-3 how to see which are fitted/enabled, 3-5 ip output card option, 3-27 M2/EOM2/AUDL ...

  • TANDBERG E5714 - page 328

    Indexes Index-6 Inst ructi on Ma nua l: evolu tion 5000 E57xx DSN G and D ENG Voya ger Encoder ST.TM .E10076. 3 sabus data bits option, 4-26 sat deliv freq option, 4-82 , 4-85 sat orb pos option, 4-82 , 4-85 sat west east option, 4-82 sat west/east option, 4-85 scramble option, 4-94 scrambling remote authorisation system (RAS), 4-89 screen saver op ...

  • TANDBERG E5714 - page 329

    Indexes Instructio n Manual: e v o lution 50 0 0 E57 x x DSNG and DENG V oyag e r Encode r Inde x -7 ST.TM .E10076. 3 transport stream id option, 4-23 ts pkts/UDP frm option, 4-88 TT7000 system manager, 4-29 tx bandwidth factor option, 4-81 , 4-84 tx bandwidth option, 4-81 , 4-84 type of service option, 4-89 U universal time co-ordinate (UTC), 4-27 ...

  • TANDBERG E5714 - page 330

    Indexes Index-8 Inst ructi on Ma nua l: evolu tion 5000 E57xx DSN G and D ENG Voya ger Encoder ST.TM .E10076. 3 Setup Menu s and Ass ociated Options Index 1 1.service menu audio (MPEG-2) option, 4-103 BISS key code option, 4-101 CA input option, 4-100 data (type of data) option, 4-103 ECM (CA) PI D option, 4-102 enc session word option, 4-101 logic ...

  • TANDBERG E5714 - page 331

    Indexes Instructio n Manual: e v o lution 50 0 0 E57 x x DSNG and DENG V oyag e r Encode r Inde x -9 ST.TM .E10076. 3 config name, 4-26 fan control, 4-28 keypress beep option, 4-27 local date, 4-26 local time, 4-26 model number, 4-26 power dip recovery option, 4-27 screen saver, 4-27 software release, 4-28 temperature, 4-27 upgrade encoder option, ...

  • TANDBERG E5714 - page 332

    Indexes Index-10 In struct ion M anu al: evolut ion 5000 E57xx D SNG an d DEN G Voyager En coder ST.TM .E10076. 3 R remote control menu, 4-24 gateway address, 4-24 IP address, 4-24 last SNMP master, 4-25 last SNMP poll, 4-25 MAC address, 4-24 network mask, 4-24 sabus address, 4-25 sabus baud rate, 4-25 sabus data bits, 4-26 SNMP master, 4-25 SNMP t ...

Manufacturer TANDBERG Category Flat Panel Television

Documents that we receive from a manufacturer of a TANDBERG E5714 can be divided into several groups. They are, among others:
- TANDBERG technical drawings
- E5714 manuals
- TANDBERG product data sheets
- information booklets
- or energy labels TANDBERG E5714
All of them are important, but the most important information from the point of view of use of the device are in the user manual TANDBERG E5714.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals TANDBERG E5714, service manual, brief instructions and user manuals TANDBERG E5714. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product TANDBERG E5714.

Similar manuals

A complete manual for the device TANDBERG E5714, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use TANDBERG E5714 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of TANDBERG E5714.

A complete TANDBERG manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual TANDBERG E5714 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the TANDBERG E5714, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the TANDBERG E5714, that we can find in the current document
3. Tips how to use the basic functions of the device TANDBERG E5714 - which should help us in our first steps of using TANDBERG E5714
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with TANDBERG E5714
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of TANDBERG E5714 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning TANDBERG E5714?

Use the form below

If you did not solve your problem by using a manual TANDBERG E5714, ask a question using the form below. If a user had a similar problem with TANDBERG E5714 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)