English dropdown-ico

Manual La Crosse Technology WS-9023U

11 pages 0.1 mb
Download

Go to site of 11

Summary
  • La Crosse Technology WS-9023U - page 1

    1 WS-9023U 915 MHz Wireless Weather Station Instruction Manual ...

  • La Crosse Technology WS-9023U - page 2

    2 TABLE OF CONTENTS Introduction……………………………………………………………………………………..3 Inventory of Contents…………………………………………………………………………4 Quick Set Up……………………………………………………………………………………4 D ...

  • La Crosse Technology WS-9023U - page 3

    3 12 or 24 Hour Time Display Indoor Temperature (°F or °C) Connection w/ Sensor Icon Set/Channel Button Outdoor Temperature (°F or °C) Outdoor Humidity (%RH) Minimum/Maximum Temperature & Humidity Minimum/Maximum & Plus Button FIGURE 1 Low Battery Indicator INSTANT TRANSMISSION is the state-of- the-art new w ireless transmission technol ...

  • La Crosse Technology WS-9023U - page 4

    4 INVENTORY OF CONTENTS 1. Wireless Weather Station (Figure 1) 2. Wireless Thermo-Hygro Sensor (TX21U) and mounting bracket. (Figure 2) 3. 3 each, 1/2” Philips screws. 4. One strip of doubl e sided adhesive tape. 5. Instruction Manual and Warranty Card. ADDITIONAL EQUIPMENT (not included) 1. 1 Philips screwdriver. 2. 4 Fresh “AA” 1.5VAlkaline ...

  • La Crosse Technology WS-9023U - page 5

    5 indoor temperature and the time as 12:00 will be displayed. If they are not shown in LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before reinserting them. Once the indoor da ta is displayed user may proceed to the next step. 3. After the batteries are inserted, the Weather Station will start receiving data signal fr ...

  • La Crosse Technology WS-9023U - page 6

    6 * When the signal is successfully received by the Weather Station, the icon will be switched on. (If not successful , the icon will not be shown in LCD) So the user can easily see whether the last reception was succe ssful (icon on) or not (icon off). On the other hand, the short blinking of the icon sh ows that a reception is being done now. C. ...

  • La Crosse Technology WS-9023U - page 7

    7 1. Remove all the batteries from the receiver and sensor(s) and wait 60 seconds. During these 60 seconds, press any button 20 times to discharge any excess power. 2. Insert the batteries to t he first Thermo-hygro sensor. 3. Within 2 minutes of powering up the fi rst sensor, insert the batteries to the Weather Station. Once the batteries are in p ...

  • La Crosse Technology WS-9023U - page 8

    8 III. MOUNTING Note: To achieve a true temperature reading, avoid mounting in direct sunlight. We recommend that you mount the thermo-hygro sensor on an outside North-facing wall (under the eve of a house is ideal). The sending range is 330 feet; obstacles such as walls, stucco walls, concrete, and large meta l objects will reduce the range. Place ...

  • La Crosse Technology WS-9023U - page 9

    9 7) During the course of the 15 minu tes an outdoor temperature should appear on the display. You can now put your sensor(s) back outside. MAINTENANCE AND CAR E INSTRUCTIONS • Extreme temperatures, vibr ation, and shock should be avoi ded to prevent damage to the units. • Clean displays and units with a soft, damp cloth. Do not use solvents or ...

  • La Crosse Technology WS-9023U - page 10

    10 Battery life Up to 24 Months WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-y ear limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser ...

  • La Crosse Technology WS-9023U - page 11

    11 LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHE R SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF TH IS PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S REACH. This warranty gives you spe ...

Manufacturer La Crosse Technology Category Weather Radio

Documents that we receive from a manufacturer of a La Crosse Technology WS-9023U can be divided into several groups. They are, among others:
- La Crosse Technology technical drawings
- WS-9023U manuals
- La Crosse Technology product data sheets
- information booklets
- or energy labels La Crosse Technology WS-9023U
All of them are important, but the most important information from the point of view of use of the device are in the user manual La Crosse Technology WS-9023U.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals La Crosse Technology WS-9023U, service manual, brief instructions and user manuals La Crosse Technology WS-9023U. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product La Crosse Technology WS-9023U.

Similar manuals

A complete manual for the device La Crosse Technology WS-9023U, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use La Crosse Technology WS-9023U by users. Manuals are usually written by a technical writer, but in a language understandable to all users of La Crosse Technology WS-9023U.

A complete La Crosse Technology manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual La Crosse Technology WS-9023U - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the La Crosse Technology WS-9023U, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the La Crosse Technology WS-9023U, that we can find in the current document
3. Tips how to use the basic functions of the device La Crosse Technology WS-9023U - which should help us in our first steps of using La Crosse Technology WS-9023U
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with La Crosse Technology WS-9023U
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of La Crosse Technology WS-9023U in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning La Crosse Technology WS-9023U?

Use the form below

If you did not solve your problem by using a manual La Crosse Technology WS-9023U, ask a question using the form below. If a user had a similar problem with La Crosse Technology WS-9023U it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)