English dropdown-ico

Manual Snapper SNP I924RX MS B&S 24 (CE)

38 pages 4.71 mb
Download

Go to site of 38

Summary
  • Snapper SNP I924RX MS B&S 24 (CE) - page 1

    OPERA T OR’S MANU AL Intermediate Frame Snowthrowers Manual Part No. 1734501 Revision 0 1 Rev. Date 0 8 /2007 TP 100-4609-0 1 -IW-SN CAUTION: Read and follow all instructions. Intermediate Frame Snowthrowers Mfg. No. Description 1695302 SMI I924E B&S 24 1695311 SMI I924EX B&S 24 (CE) 1695410 SMI I924RX MS B&S 24 (CE) 1695313 SNP I924E ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 2

    SA VE THESE INSTRUCTIONS READ THE MANUAL The operator’s manual contains important safety information you need to be aware of BEFORE you operate your unit as well as DURING operation. Safe operating techniques, an explanation of the product’ s features and controls, and maintenance information is included to help you get the most out of your equ ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 3

    3 Safety Features & Controls Operation Maintenance Troubleshooting Adjustments/Service Specifications T able of Contents Operator Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Read the Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Rules an ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 4

    4 Safety Safety Rules & Information Operating Safety Congratulations on purchasing a superior-quality piece of lawn and garden equipment. Our products are designed and manufactured to meet or exceed all industry standards for safety. Power equipment is only as safe as the operator. If it is misused, or not properly maintained, it can be dangero ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 5

    5 Safety Moving Parts This equipment has many moving parts that can injure you or someone else. However, if you are standing in the operator’s position, and follow all the rules in this book, the unit is safe to operate. The auger and impeller have spinning parts that can amputate hands and feet. Do not allow anyone near the equipment while it is ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 6

    6 Safety This machine is capable to amputating hands and feet and throwing objects. Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. The triangle in text signifies important cautions or warn ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 7

    7 Safety discharge angle. 18. Never direct discharge at bystanders or allow anyone in front of the unit. 19. Never leave a running unit unattended. Always disengage the auger and traction controls, stop engine, and remove keys. 20. Do not operate the unit while under the influence of alcohol or drugs. 21. Keep in mind the operator is responsible fo ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 8

    8 Safety DECALS This unit has been designed and manufactured to provide you with the safety and reliability you would expect from an industry leader in outdoor power equipment. Although reading this manual and safety instructions it contains will provide you with the necessary basic knowledge to operate this equipment safely and effectively, we hav ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 9

    9 Safety Part No. 1734591 - SMI/SNAPPER Main Dash Decal, Export - CE Part No. 1727208 Auger Danger Decal Part No. 1727207 Discharge Chute Danger Decal ALL MODEL DECALS CE MODEL DECALS Decals Part No. 724172 - SMI/SNAPPER Speed Control Decal, All Models 9 5 4 3 7 1 Part No. 728183 Important Over Adjustment ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 10

    10 Safety WARNING: READ OPERATOR’S MANUAL. Read and understand the Operator’s Manual before using this machine. DANGER: THROWN OBJECTS. This machine is capable of throwing objects and debris. Keep bystanders away. WARNING: REMOVE KEY BEFORE SERVICING. Remove the key, disconnect spark plug wire, and consult technical literature before performing ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 11

    11 Safety Product Identification Numbers Serial Sticker When contacting your authorized dealer for replacement parts, service, or information you MUST have these numbers. Record your model name/number, manufacturer’s identification numbers, and engine serial numbers in the space provided for easy access. These numbers can be found in the location ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 12

    12 Features & Controls Please take a moment and familiarize yourself with the name, location, and function of these controls so that you will better understand the safety and operating instructions provided in this manual. Features & Controls CONTR OL LOCA TIONS The information below briefly describes the function of individual controls. St ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 13

    13 Features & Controls Features & Controls Chute Direction Control Rotating the knob to the left will turn the spout to the left side and rotating the knob to the right will rotate the spout to the right side. Chute Deflector Control Chute Deflector Knob: Locks chute deflector in desired position. Tilting the chute deflector UP provides a h ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 14

    14 Operation GENERAL OPERA TION CHECKS BEFORE EA CH ST ART -UP 1. Make sure all safety guards are in place and all nuts, bolts and clips are secure. 2. Check to make sure that the clean-out is attached to the auger housing. Do not operate the machine without the clean-out tool properly stored on the auger housing. 3. Check the engine oil level. See ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 15

    15 Operation Figure 2. Engine Controls A. Electric Start Button (Select Models) B. Electric Start Connection (Select Models) C. Stop Switch D. Engine Key E. Starter Handle F. Primer Button G. Choke Knob Operation ST ARTING CONTR OLS See Figure 2 for the following instructions. Electric Start 1. Electric Start Button - The Electric Start Button (A) ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 16

    16 Operation Operation W ARNING Rapid retraction of the starter cord (kickback) will pull your hand and arm toward the engine faster than you can let go. Broken bones, fractures, bruises or sprains could result. When starting engine, pull the starter cord slowly until resistance is felt and then pull rapidly to avoid kickback. W ARNING If the exten ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 17

    17 Operation Figure 8. Controls (from operator’s position) A. Speed Selector B. Traction Control C. Auger Engage Control D. Chute Rotator Control Operation A B C D ST OPPING THE ENGINE W ARNING Gasoline and its vapors are extremely flammable and explosive. Fire or explosion can cause severe burns or death. DO NOT choke the carborator to stop the ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 18

    18 Operation TRA CTION DRIVE LOCK When Pushing the Snowthr ower: For easy turning when pushing the snowthrower, disengage the right wheel using the traction lock pin (See Figure 11.) 1. Turn the unit off, remove the engine key, and disconnect the spark plug wire. 2. To DISENGAGE the traction drive lock, insert the Traction Lock Pin (A, Figure 11) t ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 19

    19 Operation AFTER EA CH USE Normal use of the snowthrower may result in a build- up of packed snow in and around the starter cord housing and around engine controls. Heat from the engine will usually prevent the snow from freezing solid while the unit is running, but after the engine is shut down, some snow may continue melting from engine heat, a ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 20

    20 Maintenance A UGER GEAR CASE LUBRICA TION 1. Place the snowthrower on a level surface. 2. Remove the bolt (A, Figure 13). 3. Check the lubricant level. It should be level with the lower edge of the plug opening. If not, add Benalene grease. 4. Re-install bolt, and tighten securely. Figure 13. Auger Lubrication A. Bolt Figure 12. Checking Tire Pr ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 21

    21 Maintenance Regular Maintenance LUBRICA TION Remove wheels and grease axles once each year. Apply 5W-30 synthetic motor oil sparingly to the friction disk drive hex shaft (A, Figure 15). Apply medium weight (10W) oil to points shown (See Figures 14-17). Generally, all moving metal parts should be oiled where contact is made with other parts. Kee ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 22

    22 Maintenance CHECK / LUBRICA TE LINKA GE Check the function of the Hand controls: the controls should function as described in the CONTROLS section. It is critical for the safe operation of the unit that the controls disengage when released. Lubricate as shown in figure 18. Figure 18. Lubricate Hand Control Figure 19. Lubricating the Auger Shaft ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 23

    23 Maintenance ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 24

    24 Troubleshooting T roubleshooting W ARNING Before performing any adjustment or service to snowthrower, stop the engine and wait for moving parts to stop. Remove the key. To prevent accidental starting, disconnect the spark plug wire and fasten away from the plug. PROBLEM POSSIBLE CA USE REMED Y Engine fails to start. 1. Key is OFF. 1. Push key in ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 25

    25 Troubleshooting T roubleshooting PROBLEM POSSIBLE CA USE REMED Y Auger rotates, but snow is not thrown far enough 1. Chute deflector too low. 1. Adjust deflector as necessary. 2. Ground speed too fast. 2. Use slower speed selector setting. 3. Snowthrower discharge chute clogged. 3. STOP engine and REMOVE the key. DISCONNECT the spark plug wire. ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 26

    26 Adjustments/Service A UGER DRIVE ADJUSTMENT 1. With the drive lever released, the hook (B, Figure 20) should barely touch the lever (C) without raising it. There can be a maximum 1/32” clearance as shown. 2. To adjust, loosen nut (D) by holding the adjusting flats (A) and turning nut (D). Turn adjustment flats and hold screw. The adjustment sc ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 27

    Figure 24. Friction Disc Measurement A. Friction Wheel B. Frame 4-5/16” (10.95cm) 27 Adjustments/Service Run-In Adjustment ALL MODELS 1. After 5 hours of use, check for proper adjustment. Readjust clutch cable if necessary by increasing tension on cable. A small amount of arm movement is permissible if unit passes operating checks described in th ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 28

    28 Adjustments/Service Figure 25. Belt Cover A. Belt Cover B. Screws, 1/4-20 A B B Figure 26. Auger Belt Deflection A. Engine Drive Pulley B. Idler Pulley (Engaged Position) C. Auger Drive Pulley D. Nut E. Auger Belt B C A 1/2” (12.5mm) Deflection BEL T ADJUSTMENT A uger Drive Belt If your snowthrower will not discharge snow, check the control ca ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 29

    29 Adjustments/Service Figure 27. Shear Pins A. Shear Pins B. Cotter Pins A B SHEAR PIN REPLA CEMENT Under most circumstances, if the auger strikes an object which could cause damage to the unit, the shear pin will break. (This protects the gear box and other parts from damage.) The shear pins are located on the auger shaft as shown in Figure 27. T ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 30

    30 Adjustments/Service BEL T REPLA CEMENT A uger Drive Belt The drive belts are of special construction and must be replaced with original factory replacement belts available from your nearest authorized service center. Some steps require the assistance of a second person. If the auger drive belt is damaged, the snow thrower will not discharge snow ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 31

    31 Adjustments/Service Figure 34. Frame and Axle Housing Splitting A. Upper Capscrews B. Lower Capscrews C. Auger Housing D. Frame C Service 9. Remove hair pin (A) and slide rod (B) backward about 3 inches (until shaft separates from the worm drive). B A Figure 31. Rotator Shaft Removal A. Pin, Hair B. Shaft 11. Lift the Chute and rotator (A, Figur ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 32

    32 Adjustments/Service Service NOTE: To assemble the auger housing to the frame, have someone hold the auger clutch lever in the ENGAGED position. This will move the idler arm and pulley enough to allow the auger drive pulley to move back into position. 15. Assemble the auger housing (C, Figure 34) to the frame with the four upper taptite screws (A ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 33

    33 Adjustments/Service Service Figure 35. Traction Belt Change A. Swing Plate B. Alignment Tabs A B ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 34

    34 Adjustments/Service Service NO TES ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 35

    35 Specifications Specifications NOTE: Specifications are correct at time of printing and are subject to change without notice. * Power Ratings The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performa ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 36

    36 Specifications ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 37

    REPLA CEMENT P ARTS Replacement parts are available from your authorized dealer. Always use genuine Simplicity / Snapper Service Parts. TECHNICAL MANU ALS Additional copies of this manual are available, as well as fully illustrated parts lists. These manuals show all of the product’s components in exploded views (3D illustrations which show the r ...

  • Snapper SNP I924RX MS B&S 24 (CE) - page 38

    MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 www.SimplicityMfg.com Briggs & Stratton Yard Power Products Group Copyright © 2007 Briggs & Stratton Corporation Milwaukee, WI USA. All Rights Reserved PRODUCTS 535 Macon Street McDonough, GA 30253 www.Snapper.com ...

Manufacturer Snapper Category Snow Blower

Documents that we receive from a manufacturer of a Snapper SNP I924RX MS B&S 24 (CE) can be divided into several groups. They are, among others:
- Snapper technical drawings
- SNP I924RX MS B&S 24 (CE) manuals
- Snapper product data sheets
- information booklets
- or energy labels Snapper SNP I924RX MS B&S 24 (CE)
All of them are important, but the most important information from the point of view of use of the device are in the user manual Snapper SNP I924RX MS B&S 24 (CE).

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Snapper SNP I924RX MS B&S 24 (CE), service manual, brief instructions and user manuals Snapper SNP I924RX MS B&S 24 (CE). Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Snapper SNP I924RX MS B&S 24 (CE).

Similar manuals

A complete manual for the device Snapper SNP I924RX MS B&S 24 (CE), how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Snapper SNP I924RX MS B&S 24 (CE) by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Snapper SNP I924RX MS B&S 24 (CE).

A complete Snapper manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Snapper SNP I924RX MS B&S 24 (CE) - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Snapper SNP I924RX MS B&S 24 (CE), FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Snapper SNP I924RX MS B&S 24 (CE), that we can find in the current document
3. Tips how to use the basic functions of the device Snapper SNP I924RX MS B&S 24 (CE) - which should help us in our first steps of using Snapper SNP I924RX MS B&S 24 (CE)
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Snapper SNP I924RX MS B&S 24 (CE)
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Snapper SNP I924RX MS B&S 24 (CE) in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Snapper SNP I924RX MS B&S 24 (CE)?

Use the form below

If you did not solve your problem by using a manual Snapper SNP I924RX MS B&S 24 (CE), ask a question using the form below. If a user had a similar problem with Snapper SNP I924RX MS B&S 24 (CE) it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)