-
Image IMTL11995 - page 1
USER'S MANUAL ® CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal Model No. IMTL11995 Serial No. Find the serial number in the location shown below. Write the serial number in the space above for reference. Visit our website at www .imagefitne ...
-
Image IMTL11995 - page 2
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . ...
-
Image IMTL11995 - page 3
3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described in this manual. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it. Do not place the treadmill on any surface that blocks air op ...
-
Image IMTL11995 - page 4
21. Do not change the incline of the treadmill by placing objects under the treadmill. 22. When folding or moving the treadmill, make sure that the storage latch is fully closed. 23. When using iFIT.com CDs and videos, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change. Always listen ...
-
Image IMTL11995 - page 5
Thank you for selecting the revolutionary IMAGE ® 10.2QL treadmill. The IMAGE 10.2QL treadmill com- bines advanced technology with innovative design to help you get the most from your exercise program in the convenience of your home. And when you’re not exercising, the unique IMAGE 10.2QL can be folded up, requiring less than half the floor spac ...
-
Image IMTL11995 - page 6
ASSEMBL Y Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own phillips screwdriver and wire cutters . Note: The underside of the treadmill walking belt is coated with high-perf ...
-
Image IMTL11995 - page 7
7. Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 27). To protect the floor or carpet from damage, place a mat under the treadmill. 6. Insert two Handrail Bolts (78) with Handrail Washers (77) and Handrail Bushings ( ...
-
Image IMTL11995 - page 8
OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form. Such substances will deteriorate the walking belt and cause excessive wear. HOW T ...
-
Image IMTL11995 - page 9
FEATURES OF THE CONSOLE The advanced console offers an impressive selection of features to help you get the most from your exercise. When the console is in the manual mode, the speed and incline of the treadmill can be changed with a touch of a button. As you exercise, the console will provide continuous exercise feedback. You can even measure your ...
-
Image IMTL11995 - page 10
GETTING STARTED Attach the clip to the waistband of your clothes. Stand on the foot rails of the treadmill. Find the clip attached to the key and slide the clip onto the waistband of your clothes. Next, in- sert the key into the console. Test the clip by carefully taking a few steps backward until the key is pulled from the console. If the key is n ...
-
Image IMTL11995 - page 11
HOW TO USE THE MANUAL MODE Insert the key fully into the console. See GETTING STARTED on page 10. Select the manual mode. When the key is in- serted, the manual mode will be selected and the Manual indica- tor will light. If a program has been selected, press the Select Pro- gram button repeatedly to select the manual mode. Press the Start button o ...
-
Image IMTL11995 - page 12
Speed/Pace display — This display shows the speed of the walking belt and your current pace (pace is mea- sured in minutes per mile). Every seven seconds, the display will change from one number to the other. Note: The console can display speed and dis- tance in either miles or kilome ters. To find which unit of measure- ment is selected, hold do ...
-
Image IMTL11995 - page 13
Each program is divided into several time seg- ments of different lengths. The Time display shows both the time remaining in the program and the time remaining in the current segment. One speed setting and one incline setting are pro- grammed for each segment. The speed setting for the first segment will be shown in the flashing Current Segment col ...
-
Image IMTL11995 - page 14
HOW TO CREATE CUSTOM PROGRAMS Insert the key fully into the console. See GETTING STARTED on page 10. Select one of the custom programs. When the key is in- serted, the manual mode will be selected and the Manual indica- tor will light. To select one of the custom pro- grams, press the Select Program b utton repeatedly until the Learn 1 or Learn 2 i ...
-
Image IMTL11995 - page 15
HOW TO USE CUSTOM PROGRAMS Insert the key fully into the console. See GETTING STARTED on page 10. Select one of the custom programs. When the key is in- serted, the manual mode will be selected and the Manual indica- tor will light. To select one of the custom pro- grams, press the Select Program b utton repeatedly until the Learn 1 or Learn 2 indi ...
-
Image IMTL11995 - page 16
HOW TO USE THE FITNESS TEST PROGRAM The fitness test program is designed to measure your relative fitness level. For the best results, the fitness test program should be used at a time when your en- ergy level is high; the fitness test program should not be used if you have already exercised during the day. Note: You must wear the optional chest pu ...
-
Image IMTL11995 - page 17
When the cool-down segment is completed, the walking belt will slow to a stop. After the fitness test program is com- pleted, your fitness level will be shown in the Time display. There are ten fitness levels— fitness level 10 (FL:10) is the highest. Remem- ber, the fitness program is intended only to indicate your relative fitness level. Note: T ...
-
Image IMTL11995 - page 18
Press the Start Program button or the Speed + button to start the program. A moment after the button is pressed, the tread- mill will automatically adjust to the first speed and incline settings for the program. Hold the handrails and begin walking. Each program is divided into several time segments of different lengths. The Time display will show ...
-
Image IMTL11995 - page 19
HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER To use iFIT.com CDs , the treadmill must be con- nected to your portable CD player, portable stereo, home stereo, or computer with CD player. See pages 19 and 20 for connecting instructions. To use iFIT.com videocassettes , the treadmill must be connected to your VCR. See page 21 for ...
-
Image IMTL11995 - page 20
HOW TO CONNECT YOUR HOME STEREO Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B. A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter. Plug the adapter into the LIN ...
-
Image IMTL11995 - page 21
HOW TO CONNECT YOUR VCR Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 20. A. Plug one end of the audio cable into the ja ...
-
Image IMTL11995 - page 22
If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However, when the next “chirp” is heard, the speed and/or incline will change to the next settings of the CD or video program. To stop the walking belt at any time, press the Stop ...
-
Image IMTL11995 - page 23
HOW TO USE PROGRAMS DIRECTLY FROM OUR INTERNET SITE Our Web site at www.iFIT.com allows you to access basic programs, audio programs, and video programs directly from the internet. Additional options are soon to be available. See www.iFIT.com for details. To use programs from our Web site, the treadmill must be connected to your home computer. See ...
-
Image IMTL11995 - page 24
THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also allows you to switch the console from miles per hour to kilometers per hour. In addition, the information ...
-
Image IMTL11995 - page 25
HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- manently damaged. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the ...
-
Image IMTL11995 - page 26
TROUBLE-SHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). PROBLEM: The power ...
-
Image IMTL11995 - page 27
PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD . Using the allen wrench, tu ...
-
Image IMTL11995 - page 28
CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. Remember—these are general guide- lines only. For more detailed exercise information, ob- tain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achie ...
-
Image IMTL11995 - page 29
SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then rel ...
-
Image IMTL11995 - page 30
P ART LIST—Model No. IMTL1 1995 R0102A To locate the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual. Key No. Qty. Description Key No. Qty. Description 1 2 Foot Rail Insert 2 2 Foot Rail 3 2 Foot Rail Cap Screw 4 1 Left Foot Rail Cap 5 2 Frame Pivot Bolt 6 2 Frame Pivot Spacer 7 1 Magnet 8 1 Front Roller/Pu ...
-
Image IMTL11995 - page 31
Key No. Qty. Description Key No. Qty. Description 103 2 Extension Cap 104 2 Incline Warning Decal 105 1 Shock 106* 2 Extension Leg Assembly 107 1 Grounding Bracket 108 1 Book Holder 109 1 Power Cord Grommet 110 1 Frame 111 7 Catch Screw/Pulse Screw 112 1 Catch 113 1 12” Audio Wire 114 1 Walking Belt 115 1 Tension Washer 116 1 Idler Arm Bolt 117 1 ...
-
Image IMTL11995 - page 32
Part No. 182820 R0102A Printed in USA © 2002 ICON Health & Fitness, Inc. LIMITED W ARRANTY WHAT IS COVERED—The entire IMAGE ® 10.2QL (“Product”) is warranted to be free of all defects in material and work- manship. WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser. HOW LONG ...
-
Image IMTL11995 - page 33
1 2 3 4 5 6 7 8 9 10 100 12 13 9 21 25 26 25 30 27 9 32 34 14 35 9 6 5 9 37 3 36 9 24 38 39 40 41 42 43 39 83 83 83 45 46 47 100 50 49 2 51 1 53 53 52 11 4 49 47 100 49 49 55 56 57 58 34 59 60 59 34 61 49 55 53 54 11 0 54 53 62 109 100 47 111 11 2 53 53 11 3 44 96 83 83 31 67 67 11 6 28 17 11 5 80 101 48 100 47 120 121 22 16 18 19 20 15* 56 29 EXPL ...
-
Image IMTL11995 - page 34
95 9 99 100 103 102 106* 89 80 91 92 94 93 99 100 100 99 100 103 104 102 106* 105 99 100 97 98 104 14 9 95 94 93 14 23 100 68 70 71 74 73 72 81 108 66 87 76 76 111 111 11 7 87 11 9 11 9 90 90 90 90 88 75 77 78 77 78 75 75 79 79 65 65 69 82 11 8 84 87 87 11 11 85 86 33* 90 11 9 90 11 9 63* 64* 107 EXPLODED DRA WING—Model No. IMTL1 1995 R0102A ...
Do you have a question concerning Image IMTL11995?
Use the form below
If you did not solve your problem by using a manual Image IMTL11995, ask a question using the form below. If a user had a similar problem with Image IMTL11995 it is likely that he will want to share the way to solve it.