English dropdown-ico

Manual Wright Manufacturing 28551

20 pages 0.27 mb
Download

Go to site of 20

Summary
  • Wright Manufacturing 28551 - page 1

    Commercial Mower Owner’s Manual For Stander RH serial #28551 and higher until superseded WARNING: READ THIS MANUAL BEFORE USING Revised 06/2007 For your safety and for proper operation and maintenance read carefully and keep readily ava ilable for future reference. Additional replacement owner’ s manuals as well as illustrated part s lists are ...

  • Wright Manufacturing 28551 - page 2

    Foreword Welcome to the progressive group of mowing professionals who use Wright mowers. We are focused on giving you advanced engineering and quality construction in each mower we build. This manual explains the features and promotes safer use of the mower. Please read it in its entirety and follow the instructions carefully so that you can have m ...

  • Wright Manufacturing 28551 - page 3

    TABLE OF CONTENTS PRE-DELIVERY SERVICE OF MOWER BY DEALER ............................................................. 1 SAFETY INSTRUCTIONS ......................................................................................................... 3 I NTRODUCTION ...................................................................................... ...

  • Wright Manufacturing 28551 - page 4

    * * This Page Intentionally Left Blank * * ...

  • Wright Manufacturing 28551 - page 5

    1 Pre-Delivery Service of Mower by Dealer If you are not completely famili ar with the Safety Instruction Manual read it now before pr oceeding with the Pre-Delivery Service of the mower. Only your authorized Wright dealer should perform the Pre-Delivery Service of the mower. WARNING The Wright Stander RH is shipped completely assembled and has bee ...

  • Wright Manufacturing 28551 - page 6

    2 the foot platform, release the parking brake. Now gradually close the manual bypass valves on top of each pump one at a time and see if the wheels start to move. If the wheels move when the hand controls are in neutral position, adjust the pump neutral adjust ment allen screw. The manual bypass valves on side of each pump should now be firmly clo ...

  • Wright Manufacturing 28551 - page 7

    3 SAFETY INSTRUCTIONS WRIGHT MOWER USERS & OWNERS: RE AD THIS MANUAL BEFORE USING PLEASE BE CAREFUL! WARNING This symbol with the word “WARNING” indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION This symbol with the word “CAUTION” indicates a potentially hazardous situati ...

  • Wright Manufacturing 28551 - page 8

    4 WARNING User Clothing DO NOT operate the mower while wearing sandals, tennis shoes, sneakers, or shorts. Always wear long non-baggy pants. Wear high- top leather steel-toed work boots with thick, textured tread, soft-rubber soled at all times. Hard or smooth soled shoes are too slippery for a good footing on mower platform. NEVER wear loose-fitti ...

  • Wright Manufacturing 28551 - page 9

    5 around. When the Wright mower is in use, never direct the grass discharge toward bystanders, traffic, cars or buildings nor allow anyone within 50 feet of the machine while in operation. Thrown objects can pass through glass wind ows and some walls of buildings. There is extreme risk of danger from thrown objects or being cut by the blades of the ...

  • Wright Manufacturing 28551 - page 10

    6 Speeding with any mower is dangerous, and so is traveling faster than conditions should permit on this mower. Sudden stops from excessive speed or falling off the mower may cause serious injury or death. Operation In Reverse Always keep a firm grip on the mower stationary handlebar with both hands. Keep both feet firmly on the foot platform. Look ...

  • Wright Manufacturing 28551 - page 11

    7 Recommendations for this angle: • Lean back. This adds weight to the rear drive wheels and will allow you to mow more quickly across the slope without sliding. If your mower is equipped with the optional weight bar on the front, the mower may not handle as well crossing slopes as without the weight bar on the front. Weight on the front of the m ...

  • Wright Manufacturing 28551 - page 12

    8 OPERATING INSTRUCTIONS If you are not completely famili ar with the Safety Instruction Manual read it now before pr oceeding with the operation of the mower. REMEMBER THERE ARE CERTAIN PRECAUTIONS LISTED IN THIS MANUAL THAT YOU MUST NOW TAKE BEFORE STARTING THE MOWER. WARNING Inspect Mower Before Each Use Inspection of Mower : Do not use the mowe ...

  • Wright Manufacturing 28551 - page 13

    9 speed. Release the parking brake. The higher engine speed will make the controls much more responsive and the mower much quicker; Use caution if it is your first time. Now try moving the hand control levers, one at a time, very slightly, forward and backward. Gradually increase your speed until you are well acquainted with the operation of the ha ...

  • Wright Manufacturing 28551 - page 14

    10 Changing the Speed/Sensitivity Adjustment The controls are initially set with the Speed/ Sensitivity Adjustment in the faster, more sensitive position. If an operator is not completely familiar with the mower operation the operator may desire to decrease the ground speed. The slower setting has a corresponding decrease in the sensitivity of the ...

  • Wright Manufacturing 28551 - page 15

    11 ¼” allen wrench at the Return-to-Neutral (RTN) mechanism, if necessary. It is normal to make these adjustments from time to time. How to Test/Use the Blade Clutch/Brake Switch Before testing the blade clutch/brake operation, make sure the area is clear and there is nothing vulnerable to thrown objects from under the mower. No one should be ne ...

  • Wright Manufacturing 28551 - page 16

    12 oil fill tube. Use fully synthetic oil: Mobil1 15W- 50. Lift the mower so that the rear wheels are off the ground. Be careful to support the mower so that it will not fall or tip while the system is bled of air. With the bypass valves open and the engine running, slowly move the control levers back and forth five or six times. Now close the bypa ...

  • Wright Manufacturing 28551 - page 17

    13 Maintenance Interval Chart M AI NT E NANC E I T E M E N G I N E I T E M S S E E N O T E B E L O W F I R S T 8 H O U R S D A I L Y E V E R Y 2 5 H O U R S E V E R Y 1 0 0 H O U R S E V E R Y 2 0 0 H O U R S E V E R Y 3 0 0 H O U R S A N N U A L L Y I nspect f or cr acks i n f r am e, cutt er deck or ot her st eel par t s *3 XX I nspect al l bel t ...

  • Wright Manufacturing 28551 - page 18

    Date Maintenance/Service Performed Unit Hours Shop/Technician Maintenance Record ...

  • Wright Manufacturing 28551 - page 19

    15 Wright Manufactur ing, Inc. ( herein after: WMI) warra nts to t he origin al owner th at the new WMI mower accompanying this document will be free from manufacturing d efects in mat erials or workmanship subject to the following limitations and exclusions. Any part of the WMI commerc ial mower manufactured by WMI and found , in the reasonabl e j ...

  • Wright Manufacturing 28551 - page 20

    4600X Wedgewood Blvd Frederick, MD 21703 www.wrightmfg.com ...

Manufacturer Wright Manufacturing Category Lawn Mower

Documents that we receive from a manufacturer of a Wright Manufacturing 28551 can be divided into several groups. They are, among others:
- Wright Manufacturing technical drawings
- 28551 manuals
- Wright Manufacturing product data sheets
- information booklets
- or energy labels Wright Manufacturing 28551
All of them are important, but the most important information from the point of view of use of the device are in the user manual Wright Manufacturing 28551.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Wright Manufacturing 28551, service manual, brief instructions and user manuals Wright Manufacturing 28551. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Wright Manufacturing 28551.

Similar manuals

A complete manual for the device Wright Manufacturing 28551, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Wright Manufacturing 28551 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Wright Manufacturing 28551.

A complete Wright Manufacturing manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Wright Manufacturing 28551 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Wright Manufacturing 28551, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Wright Manufacturing 28551, that we can find in the current document
3. Tips how to use the basic functions of the device Wright Manufacturing 28551 - which should help us in our first steps of using Wright Manufacturing 28551
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Wright Manufacturing 28551
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Wright Manufacturing 28551 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Wright Manufacturing 28551?

Use the form below

If you did not solve your problem by using a manual Wright Manufacturing 28551, ask a question using the form below. If a user had a similar problem with Wright Manufacturing 28551 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)