Manual Scosche EFX Mono Amplifier

8 pages Not applicable
Download

Go to site of 8

Summary
  • Scosche EFX Mono Amplifier - page 1

    EFX AUDIO IS A DIVISION OF SCOSCHE INDUSTRIES, INC. ©2009 500c1/1000c1 02.09 500c1/1000c1 1-CHANNEL (MONO) AMPLIFIERS INSTALLATION MANUAL EFX AMPLIFIER FEATURES 500c1 SPECIFICATIONS BEFORE YOU BEGIN: Read all instructions and Cautions. Disconnect Negative terminal of Vehicle battery. Digital Multi-Meter EFX Amplifier Wiring Kit, EFX REVOPAK4 is re ...

  • Scosche EFX Mono Amplifier - page 2

    IMPORTANT/ PRELIMINARY ROUTING CABLES AND WIRES Determine the safest place to run wires through firewall. If it is necessary to drill holes be sure area is free of any obstructions on either side. Always use a grommet to protect wire. Be sure to route all wires and cables away from parts that may move or become hot. Excessive heat will damage the a ...

  • Scosche EFX Mono Amplifier - page 3

    AMPLIFIER ADJUSTMENTS Level: The Level Adjust Control (Gain) matches the output of your Car Stereo to the inputs on the Amplifier. 1. Turn Stereo on and adjust the volume to about 3/4’s of the stereo’s maximum volume. 2. Carefully turn the Level control up (by turning it clockwise from the "Min" position) on the Amp until the sound is ...

  • Scosche EFX Mono Amplifier - page 4

    4- C H A N N E L HI G H POWER POWERING YOUR AMPLIFIER Fuses: Use only specified fuses (see note). NOTE: Use three 25A ATC fuses for 500c1, or use four 25A ATC fuses for 1000c1. +12 Volts: The High current lead for the amplifier must run directly to the positive battery terminal via a dedicated fuse block. Fuse should be mounted as close to positive ...

  • Scosche EFX Mono Amplifier - page 5

    SPEAKER OUTPUTS Speaker connections are used to connect the speakers to the amplifier. Be sure speakers with the appropriate *impedances are used. It is extremely important that the speaker wires are NOT connected to or touching the chassis (Ground) of the vehicle in any way. 500c1 - SPEAKER CONNECTIONS 1-CHANNEL (MONO) CONFIGURATIONS THE FOLLOWING ...

  • Scosche EFX Mono Amplifier - page 6

    MASTER/SLAVE CONFIGURATION 10 00 W MO NO H IG H PO WE R CL AS S- D AM P LI FI ER ON PROT GND POWER B REM PHASE HI INPUT GND L R REMOTE MASTER/SLAVE SLAVE MASTER LEVEL MAX MIN BASS 12dB 0dB LOW PASS 200Hz 40Hz 0 180 IN OUT 25A 25A 25A 25A L R L R LOW INPUT LINE OUTPUT SPEAKER 10 00 W MO NO H IG H PO WE R CL AS S- D AM P LI FI ER ON PROT GND POWER B ...

  • Scosche EFX Mono Amplifier - page 7

    TROUBLE SHOOTING Use a volt meter to verify voltages at terminals of amplifiers +12V Inputs hould have a minimum of 11.5 volts while ignition of vehicle is ON or OFF. Use voltmeter to verify voltage at terminal of amplifiers REM input. REM input should have 12 volts while Car Stereo is "ON" and 0 volts While "OFF". Check main po ...

  • Scosche EFX Mono Amplifier - page 8

    TROUBLE SHOOTING Check amplifier’s input gain control settings - adjust levels if necessary. Verify battery voltage is greater than 11.5v DC at amplifier with engine off. Check Car Stereo and amplifier’s ground connections. Disconnect Speaker from Amplifier. Verify speaker impedances. For Stereo/ 2-channel mode speakers should be 2 or 4 ohms ea ...

Manufacturer Scosche Category Receiver

Documents that we receive from a manufacturer of a Scosche EFX Mono Amplifier can be divided into several groups. They are, among others:
- Scosche technical drawings
- EFX Mono Amplifier manuals
- Scosche product data sheets
- information booklets
- or energy labels Scosche EFX Mono Amplifier
All of them are important, but the most important information from the point of view of use of the device are in the user manual Scosche EFX Mono Amplifier.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Scosche EFX Mono Amplifier, service manual, brief instructions and user manuals Scosche EFX Mono Amplifier. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Scosche EFX Mono Amplifier.

Similar manuals

A complete manual for the device Scosche EFX Mono Amplifier, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Scosche EFX Mono Amplifier by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Scosche EFX Mono Amplifier.

A complete Scosche manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Scosche EFX Mono Amplifier - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Scosche EFX Mono Amplifier, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Scosche EFX Mono Amplifier, that we can find in the current document
3. Tips how to use the basic functions of the device Scosche EFX Mono Amplifier - which should help us in our first steps of using Scosche EFX Mono Amplifier
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Scosche EFX Mono Amplifier
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Scosche EFX Mono Amplifier in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Scosche EFX Mono Amplifier?

Use the form below

If you did not solve your problem by using a manual Scosche EFX Mono Amplifier, ask a question using the form below. If a user had a similar problem with Scosche EFX Mono Amplifier it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)