-
Panasonic SC-AK610 - page 1
RQT6707-3P CD Stereo System Operating Instructions Model No. SC-AK610 SC-AK510 SC-AK410 SC-AK403 Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. SC-AK610 and SC-AK403 are available in the U.S.A. only. As an E NERGY S TAR ® Partner, Panasonic has determ ...
-
Panasonic SC-AK610 - page 2
Before using RQT6707 2 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. These operating instructions are applicable to the following systems. Unless otherwise indicated, illustrations in these operating instructions are of SC-AK510. System SC-AK610 SC-AK510 SC-AK410 S ...
-
Panasonic SC-AK610 - page 3
Before using RQT6707 3 Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. Selecting fine audio equipment such as the unit you’ve just pur- chased is only the start of your mu ...
-
Panasonic SC-AK610 - page 4
Before using RQT6707 4 Batteries The remote contr ol Aim at the sensor, avoiding obstacles, at a maximum range of 7 meters directly in front of the unit. • Keep the transmission window and the unit’s sensor free from dust. • Operation can be affected by strong light sources, such as direct sunlight, and the glass doors on cabinets. Do not: ? ...
-
Panasonic SC-AK610 - page 5
Before using RQT6707 5 (R) (L) 2 AM loop antenna Stand the antenna up on its base. 1 FM indoor antenna Adhesive tape Affix where reception is best. 4 A C po wer supply cor d Note The included AC po wer supply cord is for use with this unit only . Do not use it with other equipment. For your ref erence Information you enter into the unit’ s memory ...
-
Panasonic SC-AK610 - page 6
Before using RQT6707 6 1 AC supply indicator (AC IN) This indicator lights when the unit is connected to the AC power supply. 2 Standby/on switch ( f f f f f /I, POWER) Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 3 Display 4 Remote control signal sensor ...... ...
-
Panasonic SC-AK610 - page 7
RQT6707 Recording operations Cassette deck operations 7 The radio: manual tuning Preparation: Press [TUNER BAND] to select “FM” or “AM”. Automatic presetting Do the following once each for FM and AM. Preparation: Tune to the frequency where pre-setting is to begin. Hold down [PROGRAM] until the frequency changes. The tuner presets all the s ...
-
Panasonic SC-AK610 - page 8
RQT6707 Cassette deck operations 8 1 Press [ c , OPEN/CLOSE] to open the tray. The unit comes on. 2 Set a CD in the tray. (Label must face upward.) To continue loading CDs in the other trays Press [1] – [5] to select the required tray and press [ c , OPEN/ CLOSE] to open the tray. Press [ c , OPEN/CLOSE] to close the tray. 3 Press [1] – [5] to ...
-
Panasonic SC-AK610 - page 9
RQT6707 Recording operations Cassette deck operations 9 To listen to specific CDs and tracks (CD Play Mode function) Remote control only Preparation: Press [ : / J , CD] and then [ L , CLEAR]. 1 Press [PLAY MODE] to select the desired mode. Every time you press the b utton: ALL-DISC 1-RANDOM 1-SONG 1-DISC A-RANDOM ALL-DISC: P lay s all loaded discs ...
-
Panasonic SC-AK610 - page 10
RQT6707 Cassette deck operations 10 Total number of albums (on the current disc) Total number of tracks (on the current disc) File format indicator How discs with MP3/WMA diff er fr om CDs CD Play Mode function for MP3/WMA Remote control only Preparation: Press [ : / J , CD] and then [ L , CLEAR]. 1 Press [PLAY MODE] to select the desired mode. Eve ...
-
Panasonic SC-AK610 - page 11
RQT6707 Recording operations Cassette deck operations 11 Album skip play During play or stop Push the joystick up/down ([ALBUM /CHARA] or [ALBUM /CHARA]) to select the desired album. Remote control: Press [ALBUM ( or )]. When selecting in the stop mode: Press [ : / J , CD] to start play. Play starts from the first track of the selected album. To pl ...
-
Panasonic SC-AK610 - page 12
RQT6707 Cassette deck operations 12 How discs with MP3/WMA differ from CDs 1 1 1 1 1 Push the joystick up/down ([ALBUM /CHARA] or [ALBUM /CHARA]) to select the required character. Each time you push the joystick up ([ALBUM /CHARA]), the characters change in the following order. ABCDEFGHIJKLMNOPQRSTUVWXYZ 1234567890 space !”#$ %&’() ∗ + , ...
-
Panasonic SC-AK610 - page 13
RQT6707 Recording operations Cassette deck operations 13 CD display for MP3/WMA Remote control only During play or pause Press [CD DISP] to select a desired CD display mode. Every time you press the button: a Remaining play time, Original spectrum analyzer display mode b Elapsed play time, Album title c Elapsed play time, Track title d Elapsed play ...
-
Panasonic SC-AK610 - page 14
RQT6707 14 You can use either deck 1 or deck 2 for tape playback. Use normal position tapes. High position and metal position tapes can be played, but the unit will not be able to do full justice to the characteristics of these tapes. 1 Press [ : , TAPE]. The unit comes on. If a cassette was loaded, play starts automatically (One touch play). 2 Pre ...
-
Panasonic SC-AK610 - page 15
RQT6707 15 To stop recording Press [ L , STOP]. If the tape finishes before the CD The CD continues playing. Press [ L , STOP] to stop it. To record on the other side of the tape Turn the tape over and press [ a REC]. Reducing noise when recording AM Remote control only Hold down [PLAY MODE] while recording. Every time you hold down the button: BP1 ...
-
Panasonic SC-AK610 - page 16
Timer operations RQT6707 16 A demonstration of the display is shown if you have not set the clock. You can reduce the power consumed in standby mode by turning it off. Hold down [-DISP/–DEMO] until “NO DEMO” is displayed. Every time you hold down the button: NO DEMO (off) ↔ DEMO ON (on) To show a demonstration of the display Hold down [-DIS ...
-
Panasonic SC-AK610 - page 17
Timer operations RQT6707 Reference 17 To cancel the timer Press [SHIFT] + [ r PLAY/REC] to clear the timer indicator from the display. (The timer comes on at the set time everyday if the timer is on.) To change the settings (when the unit is on) To change the play/record times Do steps 1, 2, 3 and 5. To change the source or volume 1. Press [SHIFT] ...
-
Panasonic SC-AK610 - page 18
Timer operations RQT6707 18 T r oubleshooting guide Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem: In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail consumerproducts@panasonic.com, or web si ...
-
Panasonic SC-AK610 - page 19
Timer operations RQT6707 Reference 19 Specifications AMPLIFIER SECTION SC-AK610 Power output THD 10%, both channels driven 55 Hz – 120 Hz (Low channel) 65 W per channel (12 Ω ) 120 Hz – 4 kHz (Mid channel) 30 W per channel (6 Ω ) 4 kHz – 16 kHz (High channel) 30 W per channel (6 Ω ) 40 Hz – 100 Hz (Subwoofer channel) 120 W (6 Ω ) To ...
-
Panasonic SC-AK610 - page 20
20 Reference RQT6351 Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 http://www.panasonic.com Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. (“PSC”) Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Pue ...
Do you have a question concerning Panasonic SC-AK610?
Use the form below
If you did not solve your problem by using a manual Panasonic SC-AK610, ask a question using the form below. If a user had a similar problem with Panasonic SC-AK610 it is likely that he will want to share the way to solve it.