English dropdown-ico

Manual Graco Inc. 309362

24 pages 0.98 mb
Download

Go to site of 24

Summary
  • Graco Inc. 309362 - page 1

    309362 Re v . E Related manuals U.S. Patent Pending . . 309342 309092, 308438 . . . . . . . 309340 . . . . . . . .. 307049 OPERA TION Zinc Sprayer List of Models, page 2 For Maximum Working Pressure see page 2 INSTRUCTIONS IMPORTANT W ARNINGS AND INFORMA TION. Read and keep for reference. GRACO INC. P .O. BOX 1441 MINNEAPOLIS, MN 55440–1441 E COP ...

  • Graco Inc. 309362 - page 2

    2 309362 List of Models HD = Heavy Duty Cart L W = Light Weight Cart Part No. Series Ratio / Pump Pump No. Gun Hose HD LW Maximum Fluid Working Pressure Maximum Air Input Pressure 244463 A 33:1 Bulldog 2451 17 X X X 20.7 MPa (207 bar) (3000 psi) .7 MPa (7.0 bar) (100 psi) 2451 13 A 24:1 Bulldog 2451 16 X X X 23.4 MPa (234 bar) (3400 psi) .7 MPa (7. ...

  • Graco Inc. 309362 - page 3

    3 309362 Symbols When you see a symbol in the manual, for example refer to the W ARNINGS on pages 3–4. W ARNING INSTRUCTIONS EQUIPMENT MISUSE HAZARD Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and result in serious injury . D Read all instruction manuals, tags, and labels before operating the equipment. ...

  • Graco Inc. 309362 - page 4

    4 309362 Symbols W ARNING FIRE AND EXPLOSION HAZARD Solvent and paint fumes can ignite or explode. T o help prevent a fire and explosion: D Ground the equipment and the object being sprayed. See Grounding on page 7. D Use in extremely well ventilated area. D Hold gun firmly to side of grounded pail when triggering into pail. D Use only electrically ...

  • Graco Inc. 309362 - page 5

    5 309362 ...

  • Graco Inc. 309362 - page 6

    6 309362 Overview Pump Air Regulator ON OFF 1 2 3 Loosen nut Tighten nut Adjust Air Air Supply V alve (Must be Bleed T ype) Grounding Wire Return System ...

  • Graco Inc. 309362 - page 7

    7 309362 Grounding Use only electrically conductive hoses. 1. Connect ground wire clamp to a true earth ground. 2. Ground object being sprayed, fluid supply containers, solvent pails, waste pails, and all other equipment in spray area. Use only metal pails. Do not place on non-conductive surface such as paper , cardboard, or plastic. P AINT TINT A ...

  • Graco Inc. 309362 - page 8

    8 309362 Setup Complete before using the equipment for the first time. 1. 2. 3. 4. 5. T ools Required: 1. T wo adjustable wrenches 2. Non–sparking hammer or plastic mallet 3. T orque wrench 4. Grounding wires and clamps for pails 5. T wo 5 gallon metal pails 1. Ground sprayer . See page 7. 2. Check packing nut. Fill with Throat Seal Liquid (TSL). ...

  • Graco Inc. 309362 - page 9

    9 309362 Setup 3. Attach electrically conductive fluid hose to pump and tighten. 4. Attach electrically conductive fluid hose to gun and tighten. 5. Connect main air supply to air supply valve. 6. Flush. See page 1 1. FLUSH W ASTE 7. Prime. See page 14. W ASTE P AINT ...

  • Graco Inc. 309362 - page 10

    10 309362 Pressure Relief Follow steps 1–3 when you stop spraying and before cleaning, checking, or servicing the equipment. 1. Close bleed type air supply valve. 2. Hold gun firmly against a grounded metal pail and trigger gun. 3. Open return valve. ...

  • Graco Inc. 309362 - page 11

    11 309362 Flush Flush before using for the first-time, changing colors, before fluid can dry or settle out, and before storing the system. 1. Relieve pressure. See page 10. 2. Remove tip and guard. ...... 309092, 308438 TI1 114 3. Place suction tube in solvent. FLUSH ...

  • Graco Inc. 309362 - page 12

    12 309362 Flush 4. Adjust air regulator by turning handle counter–clockwise. 5. Open air valve. Always use lowest air pressure possible when flushing. 6. Flush hose and gun. W ASTE 309092, 308438 . . . . . . . 7. Put recirculation tube in a grounded w a s te p a i l . Slowly open return valve. W ASTE ...

  • Graco Inc. 309362 - page 13

    13 309362 Flush 8. When clean solvent flows from tube, close return valve. Pump will stall. W ASTE 9. Relieve pressure. See page 10. TI1217 10. Store sprayer with solvent inside, or prime with another fluid to continue spraying. ...

  • Graco Inc. 309362 - page 14

    14 309362 Prime 1. Shut off bleed type air supply valve. 2. Adjust air regulator by turning handle counter–clockwise. 3. Replace tip and guard. ...... 309092, 308438 TI1 114 4. Place suction tube in fluid. P AINT ...

  • Graco Inc. 309362 - page 15

    15 309362 Prime 5. Place recirculation tube in a grounded fluid pail. Open return line valve. P AINT 6. Open air valve. 7. Adjust air regulator by turning handle clockwise until pump starts. Use lowest air pressure to run pump. ...

  • Graco Inc. 309362 - page 16

    16 309362 Prime 8. Close return valve when material starts flowing. 9. Hold gun firmly against a grounded metal pail and trigger gun until fluid flow is steady . Release trigger . Place recirculation tube into fluid to be sprayed. Equip- ment is ready to spray . ....309092, 306686, 308438 ...

  • Graco Inc. 309362 - page 17

    17 309362 Spraying 1. Replace tip and guard. TI1 114 2. Set air pressure regulator . 3. Slowly open bleed type air valve. 4. T est spray pattern. Read fluid manufacturer ’s recommendations. Adjust as necessary . . . 309092, 306686, 308438 ...

  • Graco Inc. 309362 - page 18

    18 309362 Spraying 5. When not spraying, reduce air pressure to 30 psi. Open recir- culation tube and close gun valve. P AINT 6. Flush and relieve pressure when done spraying. See page 10 and 1 1. ...

  • Graco Inc. 309362 - page 19

    19 309362 Maintenance Daily 1. FLUSH 2. Relieve pressure. See page 10. 3. Check packing nut. Adjust packings and replace TSL as necessary . T orque to 25–30 ft–lb (34–41 N S m). ...

  • Graco Inc. 309362 - page 20

    20 309362 Maintenance 4. Drain water from air filter . 5. Clean suction tube using a compatible solvent. Clean outside of sprayer using a cloth and compatible solvent. ...

  • Graco Inc. 309362 - page 21

    21 309362 Maintenance 6. Check hoses, tubes, and cou- plings. T ighten all fluid connec- tions before each use. T roubleshooting . . . 309340 ...

  • Graco Inc. 309362 - page 22

    22 309362 Dimensions (For mounting hole layout see air pump manual ) A B C Pump Model A mm (in.) B mm (in.) C mm (in.) Weight (approx.) kg (lbs) Bulldog 33:1 1257 (49.5) 795 (31.3) 660 (26) 236 (107) Bulldog 24:1 1257 (49.5) 795 (31.3) 660 (26) 236 (107) ...

  • Graco Inc. 309362 - page 23

    23 309362 ...

  • Graco Inc. 309362 - page 24

    24 309362 Graco Standard W arranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale by a n authorized Graco distributor to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for ...

Manufacturer Graco Inc. Category Paint Sprayer

Documents that we receive from a manufacturer of a Graco Inc. 309362 can be divided into several groups. They are, among others:
- Graco Inc. technical drawings
- 309362 manuals
- Graco Inc. product data sheets
- information booklets
- or energy labels Graco Inc. 309362
All of them are important, but the most important information from the point of view of use of the device are in the user manual Graco Inc. 309362.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Graco Inc. 309362, service manual, brief instructions and user manuals Graco Inc. 309362. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Graco Inc. 309362.

Similar manuals

A complete manual for the device Graco Inc. 309362, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Graco Inc. 309362 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Graco Inc. 309362.

A complete Graco Inc. manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Graco Inc. 309362 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Graco Inc. 309362, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Graco Inc. 309362, that we can find in the current document
3. Tips how to use the basic functions of the device Graco Inc. 309362 - which should help us in our first steps of using Graco Inc. 309362
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Graco Inc. 309362
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Graco Inc. 309362 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Graco Inc. 309362?

Use the form below

If you did not solve your problem by using a manual Graco Inc. 309362, ask a question using the form below. If a user had a similar problem with Graco Inc. 309362 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)