English dropdown-ico

Manual Fusion PPSW10H

28 pages 3.77 mb
Download

Go to site of 28

Summary
  • Fusion PPSW10H - page 1

    POWERPLANT SUBWOOFER MODELS PP – SW10E, PP– SW12E, PP– SW15E, PP– SW10H, PP– SW12H, PP– SW15H ...

  • Fusion PPSW10H - page 2

    2 2 2 FUSION CUL TURE There’ s no point doing something if no one notices. W e’ve always believed the way to make things happen is by getting noticed. From our product, to our demo cars, to our events, FUSION is about making some noise. Now you are ready . Step out of the shadows and announce you’ve arrived in a world where the old limits are ...

  • Fusion PPSW10H - page 3

    3 3 3 RECORD YOUR PRODUCT DET AILS HERE: MODEL NUMBER _______________________________ DA TE OF PURCHASE______________________ AFFIX RECEIPT HERE WARNING! Audio Systems can produce sound levels over 135dB. Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss! Please watch for emergency vehicles as warning signals ...

  • Fusion PPSW10H - page 4

    4 4 4 SUBWOOFER FEA TURES FUSION subwoofers are low frequency drivers capable of delivering extremely high bass levels from small enclosures. In order to achieve the maximum performance from your new FUSION Subwoofer , please use one of the recommended sized enclosures that best suits your application. Sealed and vented enclosure sizes can be found ...

  • Fusion PPSW10H - page 5

    5 5 5 SUBWOOFER THEILE/SMALL P ARAMETERS Subwoofer Parameters PP-SW10E PP-SW12E PP-SW15E MAX Power Rating (W atts) 750 900 1200 RMS Power Rating (W atts) 250 300 400 Coil Height (Hvc) (mm) 25 25 25 Compliance (Cms) (uM/N) 281.69 248.25 148.67 Cone Area (Sd) 31.41 49.09 80.42 D.C.Coil Resistance (Re) 1.81 1.82 1.79 Electrical Q (Qes) 0.46 0.39 0.56 ...

  • Fusion PPSW10H - page 6

    6 6 6 SUBWOOFER THEILE/SMALL P ARAMETERS cont... Subwoofer Parameters PP-SW10H PP-SW12H PP-SW15H MAX Power Rating (W atts) 900 1200 1500 RMS Power Rating (W atts) 300 400 500 Coil Height (Hvc) (mm) 28 28 28 Compliance (Cms) (uM/N) 291.8 171 147.72 Cone Area (Sd) 31.41 49.09 80.42 D.C.Coil Resistance (Re) 1.75 1.85 1.75 Electrical Q (Qes) 0.41 0.411 ...

  • Fusion PPSW10H - page 7

    7 7 7 SUBWOOFER PP-SW10E DIMENSIONS 282mm (11 – 1/8") 282mm (11 – 1/8") 282mm (11 – 1/8") 184mm (7 – 1/4") 161mm (6 – 3/8") 240mm (9 – 7/16") ...

  • Fusion PPSW10H - page 8

    8 8 8 SUBW00FER PP-SW12E DIMENSIONS 333mm (13 – 1/8") 333mm (13 – 1/8") 291mm (11 – 7/16") 191mm (7 – 9/16") 168mm (6 – 5/8") 333mm (13 –1/8") ...

  • Fusion PPSW10H - page 9

    9 9 9 333mm (13 – 1/8") 333mm (13 – 1/8") 291mm (11 – 7/16") 191mm (7 – 9/16") 168mm (6 – 5/8") 333mm (13 –1/8") 366mm (14 – 7/16") 210mm (8 – 1/4") 183mm (7 – 1/4") 410mm (16 – 1/8") 410mm (16 – 1/8") 410mm (16 – 1/8") SUBWOOFER PP-SW15E DIMENSIONS ...

  • Fusion PPSW10H - page 10

    10 10 10 282mm (11 – 1/8") 282mm (11 – 1/8") 282mm (11 – 1/8") 198mm (7 – 1 3/6") 175mm (6 – 7/8") 240mm (9 – 7/16") SUBW00FER PP-SW10H DIMENSIONS ...

  • Fusion PPSW10H - page 11

    11 11 11 282mm (11 – 1/8") 282mm (11 – 1/8") 282mm (11 – 1/8") 198mm (7 – 1 3/6") 175mm (6 – 7/8") 240mm (9 – 7/16") 333mm (13 –1/8") 333mm ( 13 – 1/8") 291mm (11 – 7/16") 205mm (8 – 1/8") 182mm (7– 3/16") 333mm (13 –1/8") SUBWOOFER PP-SW12H DIMENSIONS ...

  • Fusion PPSW10H - page 12

    12 12 12 366mm (14 – 7/16") 224mm (8 –13/16") 197mm (7– 3/4") 410mm (16 –1/8") 410mm (16 –1/8") 410mm (16 –1/8") SUBW00FER PP-SW15H DIMENSIONS ...

  • Fusion PPSW10H - page 13

    13 13 13 ENCLOSURES All enclosures include port and subwoofer displacement. All ports are circle aero ports unless otherwise stated. Ported Enclosures: A ported enclosure is generally larger than a sealed enclosure Sealed Enclosures: A sealed enclosure will be the smallest enclosure you can build. It will have a tight low frequency response, but no ...

  • Fusion PPSW10H - page 14

    14 14 14 ENCLOSURE CONSTRUCTION All enclosures should be constructed from 18mm (3/4”) Medium Density Fibre board. Enclosures should be glued and screwed, because MDF is porous. FUSION recommends sealing the internal sides with a polyurethane sealer prior to installation. T o accurately cut the subwoofer hole use the unique FUSION ruler guide incl ...

  • Fusion PPSW10H - page 15

    15 15 15 5 10 50 100 500 1000 20 K 87 81 93 99 105 111 117 123 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 750 watts ENCLOSURE TEST CURVES SEALED 5 10 50 100 500 1000 20 K 87 81 93 99 105 111 117 123 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 750 watts PORTED SUBWOOFER PP-SW10E ...

  • Fusion PPSW10H - page 16

    16 16 16 5 10 50 100 500 1000 20 K 89 83 95 101 107 113 119 125 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 900 watts ENCLOSURE TEST CURVES SEALED 5 10 50 100 500 1000 20 K 90 84 96 102 108 114 120 126 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 900 watts PORTED SUBW00FER PP-SW12E ...

  • Fusion PPSW10H - page 17

    17 17 17 5 10 50 100 500 1000 20 K 91 85 97 103 109 115 121 127 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 1200 watts ENCLOSURE TEST CURVES SEALED 5 10 50 100 500 1000 20 K 91 85 97 103 109 115 121 127 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 1200 watts PORTED SUBWOOFER PP-SW15E ...

  • Fusion PPSW10H - page 18

    18 18 18 5 10 50 100 500 1000 20 K 87 81 93 99 105 111 117 123 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 900 watts ENCLOSURE TEST CURVES SEALED 5 10 50 100 500 20 K 10K 5 K 1 K 87 81 93 99 105 111 117 123 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 900 watts PORTED SUBW00FER PP-SW10H ...

  • Fusion PPSW10H - page 19

    19 19 19 5 10 50 100 500 1000 20 K 90 84 96 102 108 114 120 126 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 1200 watts ENCLOSURE TEST CURVES SEALED 5 10 50 100 500 1000 20 K 90 84 96 102 108 114 120 126 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 1200 watts PORTED SUBWOOFER PP-SW12H ...

  • Fusion PPSW10H - page 20

    20 20 20 ENCLOSURE TEST CURVES SEALED 5 10 50 100 500 1000 20 K 93 87 99 105 111 117 123 129 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 1500 watts PORTED SUBW00FER PP-SW15H 5 10 50 100 500 1000 20 K 93 87 99 105 111 117 123 129 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 1500 watts ...

  • Fusion PPSW10H - page 21

    21 21 21 TECH TIPS OHMS LA W SIMPLIFIED IR E voltage watt s amperage curren t resistance R I W E I E 2 W W I 2 E 2 R I 2 R W E E R WR W I W/R EI POWER CABLE CALCULA TOR TOT AL AMPERAGE 0-4 FT 4-7 FT 7-10 FT 10 -13 FT 13-16 FT 16-19 FT 19-22 FT 22-28 FT 0 – 20 14 12 12 10 10 8 8 8 20 – 35 12 10 8 8 6 6 6 4 35 – 50 10 8 8 6 4 4 4 4 50 – 65 8 ...

  • Fusion PPSW10H - page 22

    22 22 22 SUBWOOFER RULER GUIDE Use the FUSION ruler guide to create a perfect subwoofer mounting surface. 1: Mark the centre position on the MDF (Medium Density Fibre) board where the subwoofer is to be mounted. 2: Fix the first hole (centre) to the marked out position on the MDF . 1 2 3 4 6 7 8 9 11 12 13 14 16 (inch) (mm) Centre 1 " 0 cutou ...

  • Fusion PPSW10H - page 23

    23 23 23 5: Using a jigsaw or router , cut out this measurement. 3: Insert a pencil into the correct subwoofer cut out measurement. 10", 12", or 15". 1 2 3 4 6 7 8 9 11 12 13 14 16 (inch) (mm) Centre 1 " 0 cutout 15" cutout 12" cutout 10"outside 263mm 12"outside 312mm 15"outside 389mm � � � ��u ...

  • Fusion PPSW10H - page 24

    24 24 24 Parallel V oice Coil Wiring (2 Ohm operation) T o wire a DVC subwoofer in parallel (to get 2 Ohms), use two short pieces of speaker wire and link the positive from one coil to the positive of the second coil, and do the same for the negative as shown in fig 1. Then wire the amplifier to opposite sides of the subwoofer in order to equalis ...

  • Fusion PPSW10H - page 25

    25 25 25 SERIES WIRING FORMULA FOR 2 SPEAKERS 4 Ohm + + + – – – 8 Ohms R1 + R 2 = LOAD IMPEDANCE 4 Ohm P ARALLEL WIRING FORMULA FOR 2 SPEAKERS 4 Ohm 8 Ohm 2.67 Ohms R1 x R2 R1 + R2 4 Ohms x 8 Ohms 4 Ohms + 8 Ohms 32 12 = LOAD IMPEDANCE = = 2.67 Ohms ...

  • Fusion PPSW10H - page 26

    26 26 26 TROUBLE SHOOTING No sound from your subwoofer : Check amplifier and wiring connections. Distorted sound : Check the connections from amplifier , processor or head unit. Subwoofer makes unusual noise in sealed enclosure : The enclosure may have leaks causing a lack of back pressure. Remove the subwoofer and ensure the enclosure is complet ...

  • Fusion PPSW10H - page 27

    27 27 27 NOTES � � � � � � � � � � � � � � � � � � YOU CAN HELP PROTECT THE ENVIRONMENT! Please remember to respect the local regulations: Hand in the non-working electrical equipment to an appropriate waste disposal center . PUBLISHED BY FUSION ELECTRONICS LIMITED: © Copyright 2006 by FUSION Electronics Limited ...

  • Fusion PPSW10H - page 28

    Specifi cations and design are subject to change without notice. ...

Manufacturer Fusion Category Speaker System

Documents that we receive from a manufacturer of a Fusion PPSW10H can be divided into several groups. They are, among others:
- Fusion technical drawings
- PPSW10H manuals
- Fusion product data sheets
- information booklets
- or energy labels Fusion PPSW10H
All of them are important, but the most important information from the point of view of use of the device are in the user manual Fusion PPSW10H.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Fusion PPSW10H, service manual, brief instructions and user manuals Fusion PPSW10H. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Fusion PPSW10H.

Similar manuals

A complete manual for the device Fusion PPSW10H, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Fusion PPSW10H by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Fusion PPSW10H.

A complete Fusion manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Fusion PPSW10H - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Fusion PPSW10H, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Fusion PPSW10H, that we can find in the current document
3. Tips how to use the basic functions of the device Fusion PPSW10H - which should help us in our first steps of using Fusion PPSW10H
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Fusion PPSW10H
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Fusion PPSW10H in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Fusion PPSW10H?

Use the form below

If you did not solve your problem by using a manual Fusion PPSW10H, ask a question using the form below. If a user had a similar problem with Fusion PPSW10H it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)