English dropdown-ico

Manual Fujitsu MB9B100A

56 pages 2.95 mb
Download

Go to site of 56

Summary
  • Fujitsu MB9B100A - page 1

    AN706-00044-1v0-E 32-BIT MICROCONTROLLER MB9B100A/MB9B300A/MB9B 400A/MB9B500A Series FM3 family inverter solution GUI User Manual ARM and Cortex-M3 are the trademarks of ARM Limited in the EU and othe r countries. TM ...

  • Fujitsu MB9B100A - page 2

    AN706-00044-1v0-E All Rights Reserved. The contents of this document are subject to chan ge wi thout notice. Customers are advis ed to consult with FUJITSU sales representatives before orderi ng. The information, such as descriptions of function an d application circuit exampl es, in this document are presented solely for the purpose of referenc e ...

  • Fujitsu MB9B100A - page 3

    AN706-00044-1v0-E Revision History Rev Date Remark 1.0 Jul. 14, 201 1 First Edition 2 ...

  • Fujitsu MB9B100A - page 4

    AN706-00044-1v0-E T able of Content s Revision History .................................................................................................................... 2  T able of Contents .................................................................................................................. 3  1  Introduction ............. ...

  • Fujitsu MB9B100A - page 5

    AN706-00044-1v0-E 1 Introduction This user manual describes how to use FUJITSU’S FM3 Inverter Plat form GUI. In Chapter 2, it explains system requirements for the GUI software. In Chapter 3, it explains how to install the GUI softw are. In Chapter 4, it explains how to in stall the communication driver (FTDI). In Chapter 5, it explains how to use ...

  • Fujitsu MB9B100A - page 6

    AN706-00044-1v0-E 2 System requirements The GUI software supported environment on PC 2.1 Supported Operating Systems: Windows Server 2003, Windows Server 2008, Windows Vista, Windows XP , Windows 7 1. Microsoft Windows XP Service Pack 2 or Service Pack 3 Minimum of 192 MB of RAM (384 MB preferred) At least a 1 GHz processor (1.6 GHz preferred) 2. M ...

  • Fujitsu MB9B100A - page 7

    AN706-00044-1v0-E 3 Install GUI Install the GUI software in your PC This FUJITSU’S FM3 Inverter Platform GUI is given by compressed file, please copy and unzip the “FUJITSU’S FM3 Invert er platform GUI.zip” file to your PC. Then, you will find 10 files in the “FUJITSU’S FM3 Inverter platform GUI” folder . T able 3-1: GUI files File na ...

  • Fujitsu MB9B100A - page 8

    AN706-00044-1v0-E 4 Simply install step s about the communication Driver A simply install steps for the FTDI. 4.1 T o install FTDI driver in Windows XP Simply install step s: 1. Connect the FTDI device (board) to a USB port on the PC. 2. New Hardware Wizard will launch. 3. Select "Install from a list o r specific location (Advanced)". 4. ...

  • Fujitsu MB9B100A - page 9

    AN706-00044-1v0-E 5 How to use the GUI Introduce the GUI software 5.1 Overview This GUI use to cooperate with the FUJITSU’S FM 3 inverter platform, customer can use this GUI to: 1. Real-time control the mo tor and PFC module function; 2. Real-time setting the moto r functions and parameters; 3. Real-time observation of motor running st ate, used ...

  • Fujitsu MB9B100A - page 10

    AN706-00044-1v0-E 5.3 GUI S tartup Open the folder; double click the “ ARMInverterPlatform.exe ” to run the software, as Figure 5.2. Figure 5-2: GUI files 9 ...

  • Fujitsu MB9B100A - page 11

    AN706-00044-1v0-E 5.4 GUI software windows’ name and function 5.4.1 Inverter Platform software introduce. - Name: Platform - Function: language setting, contain all function windows, and so on. Figure 5-3: Inverter Platform 10 ...

  • Fujitsu MB9B100A - page 12

    AN706-00044-1v0-E 5.4.2 Main window - Name : Main window - Function: connect control, start/stop control, function/p arameter setting, Constant/variable observation, l anguage setting, and current state. Figure 5-4: main windo w T able 5-1: main window function Name of button Specification 1 Connect Init the FT DI and Connect with MCU 2 PFC start-s ...

  • Fujitsu MB9B100A - page 13

    AN706-00044-1v0-E 6 Const ant observation Observe system state, motor st ate, motor p arameter , and so on. If the button is pushed, the constant window opens. (See Chapter 4.4.6 ) 7 V ariable observation Observe measure val ue with variable. If the button is pushed, the variable window opens. (See Chapter 4.4.5 ) 8 Graphic Observe measure val ue w ...

  • Fujitsu MB9B100A - page 14

    AN706-00044-1v0-E 5.4.3 Function/parameter settings window - Name : function/p arameter settings window - Function: motor selection, motor function setting and comeback default, motor parameter setting and comeback default, save config file, load config file. 5 6 3 2 1 4 Figure 5-5: setting windo w 13 ...

  • Fujitsu MB9B100A - page 15

    AN706-00044-1v0-E T able 5-2: setting window function Name of area Specification 1 Motor selection Select which motor need to set, compressor / fan 2 Motor function set Function set 3 Motor parameter set Parameter set 4 Parameter type selection Selection motor parameter type 5 Config file save and load Save and lo ad config file 6 Set and default b ...

  • Fujitsu MB9B100A - page 16

    AN706-00044-1v0-E - How to ope ration of “Function/parameter settings window” Open this window and you can see the default parameters values. If you want to change the value, after connecting to the board, (1) Select the parameter (2) Change the value directly (and the changed value b ecomes red) (3) Push “set” button on the right. (4) Be s ...

  • Fujitsu MB9B100A - page 17

    AN706-00044-1v0-E If you want to save the setting value, after connecting to the board and setting some parameters, (1) Push “saveconfig” button under the window . (2) Select the saving folder and name the .aip file (3) Push save button and the configuration file is saved. If you want to load the configurati on file, after connecting to the boa ...

  • Fujitsu MB9B100A - page 18

    AN706-00044-1v0-E 5.4.4 Signal selection window - Name : select signal window - Function: signal page selection, signal selection, signal type select, selected signal shown and some button 5 4 3 2 1 Figure 5-6: select signal window 17 ...

  • Fujitsu MB9B100A - page 19

    AN706-00044-1v0-E T able 5-3: select signal function Name of area S pecification 1 Signal page selecti on Select the signal page 2 Available signals Select the signal (most 4 signals in wave, most 10signals in variabl e ) 3 Selected signal type Select the signal t ype 4 selected signals Sho w the selected signals 5 Operation button Set / cancel. If ...

  • Fujitsu MB9B100A - page 20

    AN706-00044-1v0-E 5.4.5 Graphic window - Name : wave observer window - Function: window name set, real-time drawing the wave, showing the selection signal name, setting the wave station, r un/p ause set, save/load wave data, current state. 7 6 5 4 3 2 1 Figure 5-7: wave observer window 19 ...

  • Fujitsu MB9B100A - page 21

    AN706-00044-1v0-E T able 5-4: wave observer function Name of area Description 1 Form name Custom the name of this wave window . 2 Show wave Draw the wave of signal needing to sho w . 3 Waveform name Shown the waveform nam e, it’s come from select signal 4 Select signal Select the signal to sho w the wave If the button is clicked, the signal selec ...

  • Fujitsu MB9B100A - page 22

    AN706-00044-1v0-E Reference line of W ave D Reference line of W ave C Reference line of W ave B Reference line of W ave A Y ou can change the waveform color each other . Select the waveform you want to change at the select wave menu. Then, choose W ave Color button and sele ct the color you want to change. 21 ...

  • Fujitsu MB9B100A - page 23

    AN706-00044-1v0-E Also, you ca n adjust the waveform position each other . Select the waveform you want to adjust at the selectwave menu, and push the up / down arrow button, so the wave form can be adjusted. Y ou can adjust the X and Y grid unit each other . Set the value in the X and Y gird box directly , you can set them. When you select one wav ...

  • Fujitsu MB9B100A - page 24

    AN706-00044-1v0-E 5.4.6 V ariable window - Name :   variable observation window. - Function: show the signal value, select sig nal. 2 1 Figure 5-8: variable obs ervation window T able 5-5: variable observation function Name of area S pecification 1 V ariable value Show the value form hard ware 2 Select signal button Into ...

  • Fujitsu MB9B100A - page 25

    AN706-00044-1v0-E 5.4.7 Const ant window - Name : Constant observation window - Function: show the signal value; select signal. 2 1 Figure 5-9: Constant observation windo w T able 5-6: Constant observation function Name of area S pecification 1 Select page Select need t o show page 2 Parameter constant Show the constant about parameter - Notice: - ...

  • Fujitsu MB9B100A - page 26

    AN706-00044-1v0-E 5.5 Example of total operating Procedure This chapter introduces the operating method of GUI. 5.5.1 Hardware preparation Before operating GUI, prepare hardware according to the following procedur e. 1. Install the FTDI driver (Only once) 2. Prepare the hardware environment 3. Connect the wires among the hardw are board, FTDI devic ...

  • Fujitsu MB9B100A - page 27

    AN706-00044-1v0-E 1 Figure 5-10: operation: conne ct 26 ...

  • Fujitsu MB9B100A - page 28

    AN706-00044-1v0-E (2) S tart running the motor Next, click Compressor S tart-stop Control button in Main Window to start the motor (1 in the Figure 5-1 1 ). If succeeds, the color of Compressor St art-stop Control button changes from green to red. The button text changes from Run to Sto p . 1 Figure 5-1 1: operatio n: run compressor 27 ...

  • Fujitsu MB9B100A - page 29

    AN706-00044-1v0-E (3) Set the motor function/pa rameter T o set the function/parameter of motor , click Function/Parameter Setting button in Main Window (1 in Figure 5-12 ), and the Configuration Window in Figure4.5-4 is displayed. 1 Figure 5-12: operation: open config uration window The following example shows the operation of changing motor speed ...

  • Fujitsu MB9B100A - page 30

    AN706-00044-1v0-E 1 3 2 4 Figure 5-13: operation: set compressor parameter 29 ...

  • Fujitsu MB9B100A - page 31

    AN706-00044-1v0-E (4) Show the wave T o display the waveform, click Graphic button in Main Window (1 in Figure 5-14 ), and the Graphic Window in Figure 5- 15 is displayed. 1 Figure 5-14: operation: open the wave window 30 ...

  • Fujitsu MB9B100A - page 32

    AN706-00044-1v0-E 1 Figure 5-15: operation: open the select signal window Click Select Signal button (1 in Figure 5-15 ) to select the signal for waveform display , and the Signal Selection Window in Figure 5- 16 is displayed. The following example shows the waveform displ ay of U, V , and W phase current. Select Compressor tab in Signal Selection ...

  • Fujitsu MB9B100A - page 33

    AN706-00044-1v0-E 4 5 3 2 1 Figure 5-16: operation: select signal 32 ...

  • Fujitsu MB9B100A - page 34

    AN706-00044-1v0-E Figure 5-17: operation: dra w the waveform 33 ...

  • Fujitsu MB9B100A - page 35

    AN706-00044-1v0-E 6 Appendix 6.1 Particular Install step s about the communication Driver 6.1.1 T o install FTDI device in Windows XP - Copy and unzip the FTDI driver on the PC. - Connect the device to spare USB port on the PC. If the dev ice is based on the FT2232, the Microsoft compos ite device driver is autom atically loaded in the background. ...

  • Fujitsu MB9B100A - page 36

    AN706-00044-1v0-E Figure 6-2 - Select "Search for the best driver in thes e locations" and enter the file path in the combo-box ("¥CDM 2.02.04" in Figure 2.3 bel ow) or browse to it by clicking the browse button. Once the file path has been entered in the box, click next to proceed. Figure 6-3 - If Windows XP is configured to w ...

  • Fujitsu MB9B100A - page 37

    AN706-00044-1v0-E Anyway" to continue with the installation. If Windows XP is configured to ignore file signature warnings, no message will appear . Figure 6-4 warning - The screen shown in Figure 3-5 will be displayed as Windows XP copies the required driver files. Figure 6-5 - Windows should then display a message i ndicating that the instal ...

  • Fujitsu MB9B100A - page 38

    AN706-00044-1v0-E Figure 6-6 - If the device is based on t he FT2232, the Found New Hardwa re Wizard will continue by installing the USB Serial Converter driver for the second port of the FT2232 device. The procedure for installing the sec ond port is identical to that for installing the first port from the first screen of the Found New Hardware Wi ...

  • Fujitsu MB9B100A - page 39

    AN706-00044-1v0-E Figure 6-7 - Select "Install from a list or specific location (Advanced)" as shown in Figure 2.8 below and then click "Next". Figure 6-8 - Select "Search for the best driver in thes e locations" and enter the file path in the combo-box ("¥CDM 2.02.04" in figure 3-9 bel ow) or browse to it b ...

  • Fujitsu MB9B100A - page 40

    AN706-00044-1v0-E Figure 6-9 - If Windows XP is configured to warn w hen unsigned (non-WHQL certified) drivers are about to be installed, the mess age dialogue shown in Figure 3-10 will be displayed unless installing a Microsof t WH QL certified driver . Click on "Continue Anyway" to continue with the installation. If Windows XP is config ...

  • Fujitsu MB9B100A - page 41

    AN706-00044-1v0-E Figure 6-1 1 - Windows should then display a message i ndicating that the installation was successful (Figure 3-12). Click "Finish" to complete the installation for the first port of the device. Figure 6-12 - If the device is based on the FT2232, the second port must also be installed. The procedure for installing the se ...

  • Fujitsu MB9B100A - page 42

    AN706-00044-1v0-E - Open the Device Manager (located in "C ontrol Panel¥System" then select the "Hardware" tab and click "Device Manger") and select "View > Devices by Connection", the device appears as a "USB Serial Converter" with an additional COM port with the label "USB Serial Port &qu ...

  • Fujitsu MB9B100A - page 43

    AN706-00044-1v0-E 6.1.2 FTDI Drivers Installation guide for Windows 7 - Connect the device to a spare USB port on your PC. - If there is an available Internet connecti on, Windows 7 will sil ently connect to the Windows Update website and install any suitable driver it finds for the device. If the automatic installation t akes place there is no nee ...

  • Fujitsu MB9B100A - page 44

    AN706-00044-1v0-E Figure 6-16 - t the next screen select Device Manager: Figure 6-17 - In the Device Manager window there will be a device under Other Devices with a A yellow w arning symbol to indicate a problem ie no driver installed. The text next to this device will depend on the device attac hed. In this example the device was a TTL232R device ...

  • Fujitsu MB9B100A - page 45

    AN706-00044-1v0-E Figure 6-18 - Right click on the other device (TTL232R in this example) to bring up a menu as shown below . Figure 6-19 From the displayed menu select “Update Dr iver Software…” This then displays the option for an automatic search or a manual search. 44 ...

  • Fujitsu MB9B100A - page 46

    AN706-00044-1v0-E Figure 6-20 45 ...

  • Fujitsu MB9B100A - page 47

    AN706-00044-1v0-E - Select the second option to browse manually . Figure 6-21 - In the address box put the exact location where the drivers have been saved to. This here may be on a CD or in a folder on the PC. It is not necessarily the exact same location as shown in the screenshot. The dr ivers could have been saved anyw of the users choosing. Af ...

  • Fujitsu MB9B100A - page 48

    AN706-00044-1v0-E Figure 6-22 - When the installation has finished a completion screen is displayed. 47 ...

  • Fujitsu MB9B100A - page 49

    AN706-00044-1v0-E Figure 6-23 - Press Close button to close this window and go back to the Device Manager Window . 48 ...

  • Fujitsu MB9B100A - page 50

    AN706-00044-1v0-E Figure 6-24 The Device Manager will still show a device under Other Devices but in addition to this there is a new entry under Universal Serial Bus C ontrollers indicated in the screenshot above as the USB Serial Converter . This indicates the bus layer of the driver is inst alled. Installing the Virtual Com Port layer of the driv ...

  • Fujitsu MB9B100A - page 51

    AN706-00044-1v0-E Figure 6-25 - From the displayed menu select “Update Driver Software…” This then displays the option for an automatic search or a manual search. 50 ...

  • Fujitsu MB9B100A - page 52

    AN706-00044-1v0-E Figure 6-26 - Select the second option to browse manually . Figure 6-27 51 ...

  • Fujitsu MB9B100A - page 53

    AN706-00044-1v0-E In the address box put the exact location wher e the drivers have been saved to. This may be on a CD or in a folder on the PC. It is not nec essarily the exact same location as shown in the screenshot. The drivers could have been sa ved anywhere of the users choosing. - After entering the address select “N EXT” to start the in ...

  • Fujitsu MB9B100A - page 54

    AN706-00044-1v0-E - When the installation is finished a completion screen is displayed. Figure 6-29 - Note this screen also displays the COM port assigned to the device. Press Close button to close this window and go back to the Device Manager Window . 53 ...

  • Fujitsu MB9B100A - page 55

    AN706-00044-1v0-E Figure 6-30 This time the Device Manager does not have a TTL232R entry under Ot her Devices but does show entries under Universal Serial Bu s Controllers and Ports (COM & LPT). The above screen shot displays a correct installation. The device is now re ady to use on COM3. NOTE: Not all devices will install to COM3. The COM por ...

  • Fujitsu MB9B100A - page 56

    AN706-00044-1v0-E 55 6.2 Motor parameter item T able 6-1: motor p arameter Motor parameter name Unit Init V alue compressor model - DA89 pole pairs Pole pairs 2 Ld mh 8.8 Lq mh 14.4 target rotational speed Hz 30 target S peed RPM 1800 KP for Id （ KD ） - 0.8 KI for Id （ ID ） - 0.01 KP for Iq （ KQ ） - 0.8 KI for Iq （ IQ ） - 0.01 KP fo ...

Manufacturer Fujitsu Category Computer Hardware

Documents that we receive from a manufacturer of a Fujitsu MB9B100A can be divided into several groups. They are, among others:
- Fujitsu technical drawings
- MB9B100A manuals
- Fujitsu product data sheets
- information booklets
- or energy labels Fujitsu MB9B100A
All of them are important, but the most important information from the point of view of use of the device are in the user manual Fujitsu MB9B100A.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Fujitsu MB9B100A, service manual, brief instructions and user manuals Fujitsu MB9B100A. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Fujitsu MB9B100A.

Similar manuals

A complete manual for the device Fujitsu MB9B100A, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Fujitsu MB9B100A by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Fujitsu MB9B100A.

A complete Fujitsu manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Fujitsu MB9B100A - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Fujitsu MB9B100A, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Fujitsu MB9B100A, that we can find in the current document
3. Tips how to use the basic functions of the device Fujitsu MB9B100A - which should help us in our first steps of using Fujitsu MB9B100A
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Fujitsu MB9B100A
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Fujitsu MB9B100A in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Fujitsu MB9B100A?

Use the form below

If you did not solve your problem by using a manual Fujitsu MB9B100A, ask a question using the form below. If a user had a similar problem with Fujitsu MB9B100A it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)