English dropdown-ico

Manual TechniSat 11/20K

12 pages 0.82 mb
Download

Go to site of 12

Summary
  • TechniSat 11/20K - page 1

    GigaSwitch 1 1/20G GigaSwitch 1 1/20K Installation Manual and User Instructions MS11-20-1.qxd 20.09.00 12:57 Seite 1 ...

  • TechniSat 11/20K - page 2

    1 Function The GigaSwitch 1 1/20 multiswitch is used to supply between 20 and 120 receiving partici- pants with a satellite intermediate frequency as well as with a terrestrial signal. The following combinations can be distributed by this piece of equipment:: > two full bands of the Astra satellite Low and High Band plus the EUTELSA T Low and Hi ...

  • TechniSat 11/20K - page 3

    2 Safety Hints For your own protection, you should read the safety hints carefully before installing the GigaSwitch multiswitch. The manufacturer accepts no responsibility for damage caused by non-observance of the safety hints, or by inappropriate handling. > The components must be mounted in dry rooms on flat, non-flammable surfaces. > Air ...

  • TechniSat 11/20K - page 4

    3.3 Intermediate Amplifier 9Z (Part No. 000/3231) The intermediate amplifier 9z has been designed to compensate for the damping effect of 25m of multimedia cable, or of 40m of CoaxSat 2150 cable, when used to transmit satellite signals. The amplification of terrestrial signals can be adjusted. 3.4 Distributor 9V This is used to achieve a three-way ...

  • TechniSat 11/20K - page 5

    DiSEqC control functions can utilise the 22KHz control signal to switch to the Low Band set- ting of Eutelsat 13°. All other outputs are fixed in terms of their switching position. T he setting of this switch is irr elevant f or and not applicable to DiSEqC- compatible receivers. 4.2 Setting of terrestrial Inputs T errestrial signals can be fed in ...

  • TechniSat 11/20K - page 6

    5.3 LNBs > Y ou may choose quattro, dual output or twin LNBs, but not universal twin types. > Use only high-quality LNBs from reputable manufacturers, such as T echniSat Part. No. 0000/8880, providing either linear or diagonal frequency compensation. The out- put level should be >75 dBµV . > The LNBs receive their mains power supply vi ...

  • TechniSat 11/20K - page 7

    6 Installation Hints > W e recommend a star-form distribution originating in the attic, or near the centre of the house/building. > Please ensure that the levels of the various satellite signals fed into the system are approximately equal in strength. > The outputs for participants 5…10 and 16…20 supply a higher output level in the sat ...

  • TechniSat 11/20K - page 8

    8 7 Installation examples 60 60 Installation for up to 20 participants Distribution from attic; Output levels at connec- tor from unit Recommended Input Levels MS11-20-1.qxd 20.09.00 12:57 Seite 8 ...

  • TechniSat 11/20K - page 9

    9 Installation for 80 participants Max. cable length with 9Z: 35m multimedia cable Max. cable length without 9Z 10m multimedia cable 220V AC, max. 40W F-toF connector 9 terminators 75 Ohm Max. 20m multimedia cable MS11-20-1.qxd 20.09.00 12:57 Seite 9 ...

  • TechniSat 11/20K - page 10

    10 Installation for 120 participtans Adjustable damping unit Part No. 0000/3145 T o adjust terrestrial signal level Max. 20m multimedia cable If greater length required, insert Intermediate amplifier 9Z 10m multimedia cable 10m multimedia cable Max. 20m multimedia cable 10m multimedia cable MS11-20-1.qxd 20.09.00 12:58 Seite 10 ...

  • TechniSat 11/20K - page 11

    11 Y our equipment bears the CE-logo and complies with all relevant EU regulations! Subject to change and printing errors. Last revised 10/00. T echniSat is a registered trademark of T echniSat Digital GmbH P .O. Box 560 D-54541 Daun Germany www .technisat.de 460/99 8 T roubleshooting guide Problem No reception on any polarisation plane > green ...

  • TechniSat 11/20K - page 12

    12 GigaSwitc h 11/20, 11/20K 950...2150 MHz VHF 48...68, 1 18...300 MHz/ UKW 87,5...108 MHz/ UHF 470...862 MHz or (switchable) Broad band 48...862 MHz >40 dB >35 dB 30dB at 862 MHz 25dB at 1000 MHz 1 1/20K: 2dB (+/-1dB) 1 1/20K: 1...3dB (+/-1dB) -6 dB...+2 dB (+/- 3 dB) -4 dB...0 dB (+/- 2 dB) 88 dBµV 90 dBµV 75 dBµV <4 dB >70 dB 1 1 ...

Manufacturer TechniSat Category Switch

Documents that we receive from a manufacturer of a TechniSat 11/20K can be divided into several groups. They are, among others:
- TechniSat technical drawings
- 11/20K manuals
- TechniSat product data sheets
- information booklets
- or energy labels TechniSat 11/20K
All of them are important, but the most important information from the point of view of use of the device are in the user manual TechniSat 11/20K.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals TechniSat 11/20K, service manual, brief instructions and user manuals TechniSat 11/20K. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product TechniSat 11/20K.

Similar manuals

A complete manual for the device TechniSat 11/20K, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use TechniSat 11/20K by users. Manuals are usually written by a technical writer, but in a language understandable to all users of TechniSat 11/20K.

A complete TechniSat manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual TechniSat 11/20K - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the TechniSat 11/20K, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the TechniSat 11/20K, that we can find in the current document
3. Tips how to use the basic functions of the device TechniSat 11/20K - which should help us in our first steps of using TechniSat 11/20K
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with TechniSat 11/20K
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of TechniSat 11/20K in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning TechniSat 11/20K?

Use the form below

If you did not solve your problem by using a manual TechniSat 11/20K, ask a question using the form below. If a user had a similar problem with TechniSat 11/20K it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)