-
Yamaha CDC-91 - page 1
IMPORTANT! Please record the serial number of this unit in the space below. Model: Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN ...
-
Yamaha CDC-91 - page 2
2 SAFETY INSTR UCTIONS 1 Read Instructions – All the safety and operating instructions should be read before the unit is operated. 2 Retain Instructions – The safety and operating instructions should be retained for future reference. 3 Heed Warnings – All warnings on the unit and in the operating instructions should be adhered to. 4 Follow In ...
-
Yamaha CDC-91 - page 3
3 1 To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install your unit in a cool, dry, clean place – away from windows, heat sources, and too much vibration, dust, moisture or cold. Avoid sources of hum (transformers, motors). To prevent fire or electrical shock, do not expose to ...
-
Yamaha CDC-91 - page 4
CONNECTIONS ● Before making any connections, switch OFF the power to the unit and the amplifier or other component. ● Connect the “LINE OUT” terminals to the “CD” (or “AUX”) terminals of the amplifier. If the amplifier does not have such terminals, use the “TAPE PB” terminals. For additional details concerning these connections, ...
-
Yamaha CDC-91 - page 5
IDENTIFICA TION OF COMPONENTS FRONT P ANEL REMO TE CONTROL TRANSMITTER The control functions on the main unit and on the remote- control transmitter are virtually identical, with the exceptions described below. * The PLAY/PAUSE button on the main unit has both the functions of the PLAY button and the PAUSE button on the remote control transmitter * ...
-
Yamaha CDC-91 - page 6
LO ADING THE DISC/DISC PLA Y 1 2 3 4 5 Select the disc play mode (DISC MODE: SINGLE or ALL) while watching the display. “SINGLE” mode: The unit will play a designated disc only. “ALL” mode: The unit will play all discs in the tray in sequence. 6 * If necessary, select a desired disc by using a DISC -select button or the DISC SKIP button. No ...
-
Yamaha CDC-91 - page 7
T o stop play temporarily * To resume play, press the PLAY/PAUSE button again (or press the PLAY or PAUSE button on the remote control transmitter). T o stop play completel y DIRECT PLA Y Select a desired track by using the numeric buttons on the remote control transmitter. Example: To select track 25 Press ➀ twice, then immediately press ➁ onc ...
-
Yamaha CDC-91 - page 8
T o adv ance or rever se pla y rapidly (MANU AL SEARCH) T o advance rapidl y T o reverse rapidl y ● The sound can be heard (although slightly garbled) during manual search in either direction. This is convenient for locating a precise position within a track, or for reviewing the contents quickly. ● Manual search can also be performed while dis ...
-
Yamaha CDC-91 - page 9
1 2 3 Select whether to play one disc or all discs in the tray. * If the “SINGLE” disc play mode is selected, next select a desired disc by using the DISC SKIP button or a DISC - select button. 4 T o cancel random-sequence play Press the STOP button or RANDOM button once again, or open the disc tray by pressing the OPEN/CLOSE button. Notes ● ...
-
Yamaha CDC-91 - page 10
➀ Shows the program number for the track to be set next. ➁ Shows the selected disc and track number. ➂ Shows the total time of the tracks currently programmed, if tracks are selected from one disc only. ➃ Shows only the numbers of programmed tracks. * If “P-01” does not appear in the display after the PROG button is pressed, press the T ...
-
Yamaha CDC-91 - page 11
Notes ● You can set as many as 20 programs at a stretch. ● If you will make program setting with the DISC 1 tray empty, be sure to press the DISC SKIP button before starting program setting. ● The total time of the programed tracks will not be displayed, if tracks are selected from more than one disc. ● The total time of the programmed trac ...
-
Yamaha CDC-91 - page 12
1 Select a track which has index numbers. 2 3 Select the desired index number. T o cancel the index searc h function Press the INDEX button. Notes ● Not all discs have index numbers. The index system is a method for sub-dividing tracks into smaller divisions (such as, for example, the movements within classical symphonies) for easier location of ...
-
Yamaha CDC-91 - page 13
NO TES ABOUT THE REMO TE CONTROL TRANSMITTER NO TES ABOUT HANDLING COMP A CT DISCS ● This compact-disc player is designed only for playing of compact discs bearing the mark. Never attempt to load any other type of disc into the unit. The unit will also play 3-inch (8-cm) compact discs. ● To remove a disc from its storage case, open the case and ...
-
Yamaha CDC-91 - page 14
AUDIO SECTION Frequency response ................... 2 Hz – 20 kHz, +0.5 / –1 dB De-emphasis equalization ......................................... ±0.5 dB Harmonic distortion+noise (with L.P.F.) ..................................... Less than 0.004% (1 kHz) S/N ratio ........................................................................ 108 ...
-
Yamaha CDC-91 - page 15
YAMAHA ELECTRONICS CORPORATION, US A 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD . 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H . SIEMENSSTR. 22-34, D-25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A . RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOUR ...
Do you have a question concerning Yamaha CDC-91?
Use the form below
If you did not solve your problem by using a manual Yamaha CDC-91, ask a question using the form below. If a user had a similar problem with Yamaha CDC-91 it is likely that he will want to share the way to solve it.