English dropdown-ico

Manual NEC NC800C

62 pages 2.5 mb
Download

Go to site of 62

Summary
  • NEC NC800C - page 1

    NC800C User ’ s Manual DLP Cinema ® Projector NEC V iewtechnology , Ltd. ...

  • NEC NC800C - page 2

    W ARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT T O RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPT ACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN BE FULL Y INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH-VOL T AGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERS ...

  • NEC NC800C - page 3

    Cleaning 1. Unplug the projector before cleaning. 2. Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use strong detergents or solvents such as alcohol or thinner . 3. Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the lens. Fire and Shock Pr ecautions 1. Ensure tha ...

  • NEC NC800C - page 4

    Pr é caution: lire attentivement ce manuel avant d ’ utiliser le NC800C et le conserver à port é e de main pour future r é f é rence. A VERTISSEMENT POUR EVITER UN INCENDIE OU UN RISQUE D ’ ELECTROCUTION NE P AS EXPOSER CET ENSEMBLE A LA PLUIE OU A L ’ HUMIDITE; DE MEME, NE P AS BRANCHER LA PRISE POLAIRE A VEC UNE RALLONGE A MOINS QUE LE ...

  • NEC NC800C - page 5

    Pr é cautions contre l ’ incendie ou la d é char ge 1. S ’ assurer qu ’ il y ait une ventilation suffisante et que les ouvertures ne soient pas obstru é es afin d ’é viter des concentrations potentiellement dangereuses d ’ ozone et l ’ accumulation de chaleur à l ’ int é rieur du projecteur . Laisser au moins 20 cm d ’ espace ...

  • NEC NC800C - page 6

    Maschinenl ä rminformations-V erordnung – 3. GPSGV , Der h ö chste Schalldruckpegel betr ä gt 70 dB(A) oder weniger gem äß EN ISO 7779. W ARNUNG ZUR VERMEIDUNG VON FEUER UND ELEKTRISCHEN SCHL Ä GEN DARF DAS GER Ä T WEDER REGEN NOCH FEUCHTIGKEIT AUSGESETZT WERDEN. DER POLARISIER TE STECKER DIESES GER Ä TES DARF NUR DANN IN EIN VERL Ä NGER ...

  • NEC NC800C - page 7

    V orsichtsmasnahmen zur V ermeidung von Br ä nden und elektrischen Schl ä gen 1. Sorgen Sie f ü r ausreichende Bel ü uftung und stellen Sie au ß erdem sicher , dass die L ü ftungsschlitze frei bleiben, damit sich innerhalb des Projektors kein Hitzestau bilden kann. Lassen Sie mindestens 20 cm Abstand zwischen Ihrem Projektor und der W and. De ...

  • NEC NC800C - page 8

    G-3 (MEMO) Important Information ...

  • NEC NC800C - page 9

    1 T able of Contents T able of Contents ............................................................................ 1 1.What’ s in the Box? and the Names of the Projector Parts ............. 2 1-1. Features .................................................................................................................. ......................... ...

  • NEC NC800C - page 10

    2 1-1. Features • Compact projector for dedicated use with DLP Cinema ® We have made the projector and the lamp console into one unit and achieved a quite compact pr ojector exclusively used for DLP Cinema ® . • V arious setups possible thanks to a variety of optional lens units and the facility for invertedinstallation The DLP Cinema ® proj ...

  • NEC NC800C - page 11

    3 1. What ’ s in the Box? and the Names of the Projector Parts • Up-to-date functions of DLP Cinema ® available This projector supports CineLink TM , CineCanvas TM , CinePallette TM and CineBlack TM which ar e the new functions for security , subtitles, etc., developed by T exas Instruments Incorporated. (1) CineLink TM : Security management T ...

  • NEC NC800C - page 12

    1. What ’ s in the Box? and the Names of the Projector Parts 4 1-2. What ’ s in the Box? Check the content of the accessories. User ’ s Manual NC800C projector Remote control (RD-371E) UM-3 AA size battery (for the remote control) x 2 Remote cable (4 m) x 1 Remote cable (16 m) x 1 Power cord (gr ounded) Connect this projector to the power out ...

  • NEC NC800C - page 13

    5 1. What ’ s in the Box? and the Names of the Projector Parts 1-3. Names of the Projector Parts 1-3-1. Front of the projector M M S S T A T U S 1 2 3 4 5 6 1. Air inlet Air is taken in here to pr ovide cooling of the projector . 2. Control panel On the control panel, power to your pr ojector is turned on or off, signals are selected, and various ...

  • NEC NC800C - page 14

    1. What ’ s in the Box? and the Names of the Projector Parts 6 1-3-2. Rear of the projector 1 2 3 4 5 6 1. Air inlet Air is taken in here to pr ovide cooling of the projector . 2. Air outlet The heat of the lamp is vented here. 3. Power cord Connect the power cord to an AC outlet. 4. Function ground The function ground is used when you wish to es ...

  • NEC NC800C - page 15

    7 1. What ’ s in the Box? and the Names of the Projector Parts 1-3-3. Connection terminals 1 8 6 2 5 3 4 7 9 10 12 11 1. Remote control input terminal (REMOTE IN) (Stereo mini) Connect the remote contr ol of the projector , using the supplied remote contr ol cable. Memo • The projector ’ s remote control can be used by connecting with the r e ...

  • NEC NC800C - page 16

    1. What ’ s in the Box? and the Names of the Projector Parts 8 9. DVI-D B input terminal (DVI-B) (DVI-D 24P) Connect the DVI-D output terminal of a PC to this ter minal. Use a commercially available DVI-D signal cable (Single Link). 10. External control terminal (GP I/O) (D-Sub 37P) Use this terminal when controlling your projector fr om an exter ...

  • NEC NC800C - page 17

    9 1. What ’ s in the Box? and the Names of the Projector Parts 1-3-4. Control panel MMS ST A TUS 12 8 9 10 11 19 20 12 13 18 16 17 5 6 7 15 14 3 4 1. Remote control light reception unit This receives signals from the r emote control. 2. BACKLIGHT switch Operate this switch to turn on/off the back light of the LCD screen and operation panel. 3. MM ...

  • NEC NC800C - page 18

    1. What ’ s in the Box? and the Names of the Projector Parts 10 9. 1 to 8 buttons Press the 1 to 8 buttons while depr essing the CTL (MACRO) button to select titles (input signals) assigned to each button. T o this projector , 100 titles at most can be register ed (input signal registration). Among the r egistered titles, any 8 titles can be assi ...

  • NEC NC800C - page 19

    11 1. What ’ s in the Box? and the Names of the Projector Parts 1-4. Names on the Remote Control 1. POWER ON button Operate this button to turn on the power to your projector . Press it thr ee seconds or longer . When turning on the power to your projector , first set the main power switch to the main unit to ON, which puts your projector on stan ...

  • NEC NC800C - page 20

    1. What ’ s in the Box? and the Names of the Projector Parts 12 1 1. SELECT  buttons • Press the SELECT  /  button when the menu is displayed, and a menu item can be selected. • Press the SELECT  button when the menu is displayed, and a submenu will be displayed. • Press the SELECT  button when the menu is displayed, ...

  • NEC NC800C - page 21

    13 1. What ’ s in the Box? and the Names of the Projector Parts Using the remote control cable Use the remote contr ol cable when there ar e objects that interrupt or obstruct the space between the r emote control reception unit on the projector and the r emote control, or when you ar e using the r emote control beyond its effective range. Note t ...

  • NEC NC800C - page 22

    14 2-1. Steps for setting up and connecting Use the following steps for setting up your projector: • Step 1 Setup the screen and pr ojector . (Contact your dealer to carr y out the setup.) • Step 2 Connect cables to the image input terminals. (See page 15) Connect cables to the various control terminals. (See page 16) • Step 3 Connect the pow ...

  • NEC NC800C - page 23

    2. Installation and Connection 15 2-2. Connecting the image input terminals Y our projector has four image input terminals, namely , the HDSDI A input ter minal, the HDSDI B input terminal, the DVI-D A input terminal, and the DVI-D B input terminal. • HDSDI A/B input terminal (SDI A/SDI B) ................. Inputs serial digital images from a Vid ...

  • NEC NC800C - page 24

    2. Installation and Connection 16 2-3. Connecting the various control terminal For control, your projector comes with such ports as the PC contr ol terminal and the Ether net port (RJ-45). • PC control terminal (PC CONTROL) .......... Use this terminal when controlling the pr ojector in serial connection from a PC. • Ethernet port (LAN 1/LAN 2) ...

  • NEC NC800C - page 25

    2. Installation and Connection 17 2-4. Connecting the power cord After making certain that the main power switch of your projector is OFF , connect the power cord to 100-120V AC or 200- 240V AC three-prong outlet (grounded). CAUTION • Please contact your dealer/distributor to perform the wiring for connection of the power cord to your projector . ...

  • NEC NC800C - page 26

    18 3-1. Steps of projecting images • Step 1 T ur n on the power to the projector . (See page 19) • Step 2 Select the title of input signal. (See page 21) • Step 3 Adjust the position and size of the projected scr een. (See page 22) • Step 4 T ur n off the power to the projector . (See page 24) 3. Projection of Images (Basic Operation) ...

  • NEC NC800C - page 27

    19 3. Projection of Images (Basic Operation) 3-2. T urning your projector on Preparation: Supply AC power to the projector head. Please contact your dealer/distributor to connect the power cord. NO TE • T ur n off the main power switch to the pr ojector head when supplying or cutting AC power to the projector . If power is supplied or cut while t ...

  • NEC NC800C - page 28

    20 3. Projection of Images (Basic Operation) 3 Press the POWER button on the control panel of your projector three seconds or longer . Y our projector is turn on, and the screen glows light about 30 seconds later . The POWER indicator of the projector lights up green. • When controlling with the r emote control, pr ess the POWER ON button three s ...

  • NEC NC800C - page 29

    21 3. Projection of Images (Basic Operation) 3-3. Selecting the title of input signal This projector allows you to select pr e-register ed signals using the signal selection buttons on the control panel (up to 8 signals). Request your dealer/distributor for details on registering and changing titles. This section explains the steps for selecting re ...

  • NEC NC800C - page 30

    22 3. Projection of Images (Basic Operation) 3-4. Adjusting the position and the size of projected screen 3-4-1. Displaying the test pattern 1 Press the TEST button on the remote control. Alternatively , select the test pattern from the signal selection button. If you register the test patterns to the signal selection buttons (<1> to <8> ...

  • NEC NC800C - page 31

    23 3. Projection of Images (Basic Operation) 3-4-3. Fine adjustment of the size of the projected screen (Zoom) 1 Press the ZOOM +/- buttons while depressing the CTL (LENS) button on the control panel of your projector as required. • When controlling with the r emote control, pr ess the ZOOM +/- button while depressing the CTL (LENS) button. 3-4-4 ...

  • NEC NC800C - page 32

    24 3. Projection of Images (Basic Operation) 3-5. T urning your projector off 1 Press the POWER button on the projector control panel for three seconds or longer . The power to the projector is turned off. The POWER indicator will blink in orange (cooling state). The fan will continue to rotate while cooling, and the amount of time r emaining for c ...

  • NEC NC800C - page 33

    25 4-1. Basic operation with adjustment menus T o adjust the projector , display the menu on the LCD screen of the pr ojector control panel. 4-1-1. Screen display The menu display screen is composed of a menu display field (the upper two lines) and a setting item display field (the bottom two lines). ← Displays the main menu or submenus. ← Disp ...

  • NEC NC800C - page 34

    26 4. Using Menus When not displaying menus, the following screen is normally displayed. When in standby When the projector is in a standby state (the main power switch in on), the following is displayed. When power is turned on When the power is turned on, the following is displayed. ← Displays the hours of lamp bulb use. ← Displays the lamp o ...

  • NEC NC800C - page 35

    27 4. Using Menus 3 Press the [MENU CTL] DOWN button. The submenu “ Lamp ” of “ Information ” is displayed. The menu item can be selected by pressing the ENTER button instead of the SELECT DOWN button T o return to the previous state, pr ess the [MENU CTL] UP button, or the CANCEL button. 4 Press the [MENU CTL] LEFT/RIGHT button to select t ...

  • NEC NC800C - page 36

    28 4. Using Menus 4-1-3. How to enter alphanumeric characters Alphanumeric characters are entered for items, such as the title of input signal. With this projector , the characters are inputted by pr essing numeric buttons on the remote contr ol. By pressing the numeric buttons, the characters can be inputted as shown in the table below . • T o d ...

  • NEC NC800C - page 37

    29 4. Using Menus 4-2. T able of adjustment menus Menus in parentheses ar e menus for our service personnel. Normally , these menus cannot be used. Main menu Title Select Configuration (Title Setup) Information Submenu "Title Memory Name" TEST Pattern Lamp Setup (Setup) (Installation) (Memory) Macro Key Lamp Macro Key Usage Error Code V e ...

  • NEC NC800C - page 38

    30 4. Using Menus 4-3. T itle Select 4-3-1. T itle select (Title Memory) Selects the title of the signal to be projected. Y ou can register up to 100 titles. Y ou can also assign r egistered titles to the Macro keys of 1 to 8 on the pr ojector ’ s control panel and call them up directly using those buttons. Request your dealer/distributor for det ...

  • NEC NC800C - page 39

    31 4. Using Menus 4-4. Configuration Please request your dealer/distributor to perform the settings. 4-4-1. Lamp Setup Adjust Adjusts the lamp output (brightness). Contr ol the output at 30 to 34 W increments. ← Displays the lamp output (%) with regar d to the setting. ← Adjusts the lamp brightness. Feedback Sets the lamp brightness constant mo ...

  • NEC NC800C - page 40

    32 4. Using Menus 4-6. Information Displays the hours of lamp bulb use, the version information and error codes. 4-6-1. Lamp Displays information relating to the lamp. (Such as lamp output and the utilization time of lamp bulb.) Output Displays the lamp brightness (output) setting. ← Displays the power consumption (W). 4-6-2. Macro Key Displays t ...

  • NEC NC800C - page 41

    33 4. Using Menus 4-6-5. V ersion Displays the versions of the projector head. BIOS Firmware Data Serial No. Displays the BIOS version of the projector head. Displays the firmware version of the projector head. Displays the data version of the projector head. Displays the serial number of the projector head. ← Selects the item to display. ← Dis ...

  • NEC NC800C - page 42

    34 NO TE Please request your dealer to perform lamp replacement, filter replacement and cleaning of the pr ojector inside. 5-1. Cleaning the Cabinet Be sure to always check that the AC power supply of the pr ojector head is disconnected before carrying out maintenance of your projector . • Wipe with a dry , soft cloth without nap. When the cabine ...

  • NEC NC800C - page 43

    35 6-1. T roubleshooting Before asking for r epair , please check your connection, settings and operation once again. If the trouble cannot be corrected, please contact your dealer/distributor for instructions or repair . 6-1-1. Problems and where to check Problem The projector cannot be turned on. The image cannot be projected. The image is distor ...

  • NEC NC800C - page 44

    36 6. Appendix Problem The projector cannot be operated with the remote contr ol. The ST A TUS indicator blinks in red. An error code is displayed. Check these items Make sure the r emote control transmission unit is facing the light reception unit on the pr ojector . Check whether the batteries are still good. Replace with new batteries. Check whe ...

  • NEC NC800C - page 45

    37 6. Appendix 6-2. Indicator display list See the descriptions below when the blinking or lighting of the two indicators on the pr ojector ’ s control panel is observed. MMS STA TUS MMS ST A TUS indicator POWER indicator ST A TUS indicator 6-2-1. POWER indicator Indicator condition Off Blinking light Steady light Projector condition The main pow ...

  • NEC NC800C - page 46

    38 6. Appendix 6-3. Error code list Please inquire your dealer/distributor about action to be taken for each error code. Description is omitted for error codes 20 to 92. Error code 1 2 3 4 5 8 9 10 11 12 15 16 17 18 19 20 21 22 23 24 25 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 60 61 62 Error message Lamp Cover Open Over T emp Lamp F ...

  • NEC NC800C - page 47

    39 6. Appendix Error code 63 64 65 66 67 68 69 70 71 90 91 92 120 123 130 Error message PB McBSP XRDY Fail PB FPGA Done Fail PB FPGA Reg R/W Fail PB Serial-ID Chip Fail PB CLUT -SRAM Fail PB OvFS-SDRAM Fail PB Resizer FIR Fail PB Resizer FIFO Fail PB Other Fail FB Red RDRAM Signature Fail FB Green RDRAM Signatur e Fail FB Blue RDRAM Signature Fail ...

  • NEC NC800C - page 48

    40 6. Appendix 6-4. Operation using an HTTP browser 6-4-1. Overview The use of HTTP server functions will allow control of the projector fr om a web browser . Please be sure to use “ Microsoft Internet Explorer 4.x ” or a higher version for the web browser . This device uses “ JavaScript ” and “ Cookies ” and the browser should be set t ...

  • NEC NC800C - page 49

    41 6. Appendix 6-4-4. Structure of the HTTP server Power Title List Basic Control Lens Mute Projector Status Controls the power to your pr ojector . • On: T ur ns the power on. • Off: T urns the power off. Displays titles set in the projector (such as input port, screen type, and title). Check, and the title will be changed. Displays the basic ...

  • NEC NC800C - page 50

    42 6. Appendix 6-5. Outline Drawing Units: mm (inch) ...

  • NEC NC800C - page 51

    43 6. Appendix 6-6. Specifications Model No. Projection method Panel resolution Lamp type Screen sizes Contrast ratio Lens adjustment function Signal input terminal External Control Power supply voltage Input current Power consumption Cooling method Noise level Installation Dimensions Net weight Environment Regulations NC800C 3 chip DMD reflector m ...

  • NEC NC800C - page 52

    44 6. Appendix Caracteristiques techniques Num é ro du mod è le Mode de projection R é solution du panneau T ype de lampe T ailles d' é cran Rapport de contraste Fonction de r é glage de l'objectif Borne d'entr é e des signaux Commande ext é rieure Alimentation é lectrique Intensit é d ’ entr é e Puissance absorb é e Mod ...

  • NEC NC800C - page 53

    45 6. Appendix T echnische Daten Modellnummer Projektionsverfahren Bildfl ä chenaufl ö sung Lampentyp Bildschirmgr öß en Kontrastverh ä ltnis Linsenbewegung Signaleingangsanschluss Externe Steuerung Spannungsversorgung Eingangsstrom Leistungsaufnahme Abk ü hlverfahren Ger ä uschpegel Installation Abmessungen (B/T/H) Gewicht Umgebungsbedingun ...

  • NEC NC800C - page 54

    46 6. Appendix 6-7. Pin Assignment and Functions of T erminal 6-7-1. PC CONTROL connector (D-Sub 9 pin) This is an RS-232C interface for controlling the projector head fr om a PC. The projector operates as a DCE (Data Communication Equipment), so use a straight cable when connecting to a PC. Pin No. 1 2 3 4 5 6 7 8 9 RS-232C Signal Name CD RXD TXD ...

  • NEC NC800C - page 55

    47 6. Appendix 6-7-2. Remote control input connector (REMOTE IN) (Stereo mini) Connected with the projector ’ s remote control the accessory remote cable. When the remote cable is connected to this connector , the remote cable connector operates with the following functions. DC power supply unit for remote contr ol Remote signal unit GND unit The ...

  • NEC NC800C - page 56

    48 6. Appendix 6-7-4. External control connector (GP I/O) (D-Sub 37 pin) It is possible to control the projector with an external device and to control the external device fr om the projector using an external control connector (GP I/O: General Purpose I/O Ports). Each pin is electrically separated from the projector internal circuits by a photo-co ...

  • NEC NC800C - page 57

    49 6. Appendix Input Connector GP I/O Connector Inside Projector Photo-coupler Forward dir ection voltage: 1.1 V (@5 mA) Resist = 390 Ω Ext_GPIN_P Pin No.: 1234567 Ext_GPIN_N Pin No.: 20 21 22 23 24 25 26 8 27 V oltage applied across the pins of Ext_GPIN_P and Ext_GPIN_N should be in the range from 3.3 Vdc to 10 Vdc. Recommended Operating Current ...

  • NEC NC800C - page 58

    50 6. Appendix 6-7-5. SDI-A, SDI-B (HD-SDI input connector) (BNC) This is a signal input connector (SMPTE 292/HDSDI) for CINEMA. The SMPTE 292/HD-SDI transfers HDTV signals with 1.5 GHz digital serial signals, so use a 75 É ∂ coaxial cable having a thickness and characteristics higher than 5C-FB, and use a BNC for the connector . Signal GND 6-7- ...

  • NEC NC800C - page 59

    51 6. Appendix 6-8. Related products list Product name Lens Anamorphic lens Anamorphic lens manually operated turret Lamp house module (excluding lamp) Lamp Wireless LAN car d Zoom Lens 1.45 to 1.8:1 Zoom Lens 1.8 to 2.4:1 Zoom Lens 2.2 to 3.0:1 Zoom Lens 3.0 to 4.3:1 Anamorphic lens 1.25 Anamorphic turret Lamp house module Lamp Wireless LAN Card N ...

  • NEC NC800C - page 60

    52 6. Appendix (MEMO) ...

  • NEC NC800C - page 61

    © NEC Viewtechnology . Ltd. 2006 Printed in Japan V er .2 06/06 ...

  • NEC NC800C - page 62

    7N8P6422 NC800C User ’ s Manual Printed on recycled paper ...

Manufacturer NEC Category Projection Television

Documents that we receive from a manufacturer of a NEC NC800C can be divided into several groups. They are, among others:
- NEC technical drawings
- NC800C manuals
- NEC product data sheets
- information booklets
- or energy labels NEC NC800C
All of them are important, but the most important information from the point of view of use of the device are in the user manual NEC NC800C.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals NEC NC800C, service manual, brief instructions and user manuals NEC NC800C. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product NEC NC800C.

Similar manuals

A complete manual for the device NEC NC800C, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use NEC NC800C by users. Manuals are usually written by a technical writer, but in a language understandable to all users of NEC NC800C.

A complete NEC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual NEC NC800C - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the NEC NC800C, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the NEC NC800C, that we can find in the current document
3. Tips how to use the basic functions of the device NEC NC800C - which should help us in our first steps of using NEC NC800C
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with NEC NC800C
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of NEC NC800C in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning NEC NC800C?

Use the form below

If you did not solve your problem by using a manual NEC NC800C, ask a question using the form below. If a user had a similar problem with NEC NC800C it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)