English dropdown-ico

Manual SIIG 04-0343C

12 pages 0.04 mb
Download

Go to site of 12

Summary
  • SIIG 04-0343C - page 1

    1 CyberPro PCI 4S Quick Installation Guide 04-0343C Introducing the CyberPro PCI 4S The CyberPro PCI 4S high-speed serial I/O card provides four additional 9-pin serial ports. Depending on the model purchased, this board will fit into either a Full or Low Profile chassis. Features and Benefits • Conforms to PCI v2.2 Plug and Play • Full support ...

  • SIIG 04-0343C - page 2

    2 Package Contents • CyberPro PCI 4S board • 4-port fan-out cable • Low profile bracket (Dual Profile board only) • Driver CD • Quick installation guide Layout Full profile bracket 4-pin power connector (optional)* JP1 (S1) JP4 (S4) JP2 (S2) JP3 (S3) 44-pin connector Figure 1. Layout * Note: Make this connection only when two or more seri ...

  • SIIG 04-0343C - page 3

    3 Fan-out Cable 44-pin connector Serial ports DB9 (9-pin) Figure 2. Fan-out cable Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed. Static Electricity Discharge may permanentl ...

  • SIIG 04-0343C - page 4

    4 5. Set JP1 - JP4 jumper settings to the desired voltage only if your serial device(s) needs additional power from the serial port. However, most serial devices do not require additional power. For more information, see Figure 1 on page 2 . Skip this step if power is not required. 6. To install the card, carefully align the card's bus connect ...

  • SIIG 04-0343C - page 5

    5 Windows 98/98SE 1. At the Add New Hardware Wizard , click Next . 2. Select Search for the best driver for your device (Recommend) , then click Next . 3. Insert the driver CD, check Specify a location , uncheck the other boxes, , type in D:9x , then click Next . (Change D: to match your CD-ROM drive letter) 4. Click Next, then Finish . 5. Repeat ...

  • SIIG 04-0343C - page 6

    6 Windows NT 4.0 1. From the desktop click Start, then Run . 2 . Insert the driver CD, type in D:NT4Install_serial.exe, then click OK . (Change D: to match your CD-ROM drive letter) 3. Click Next when the Welcome window appears. 4. Select Install , then click Next . 5. Click Yes , then click Exit . 6. Restart Windows to complete the installation. ...

  • SIIG 04-0343C - page 7

    7 32-bit Windows XP/Server 2003 1. At the Found New Hardware Wizard, insert the driver CD. For XP w/SP1 or earlier/ Server 2003 : go to step #2. For XP w/SP2 or later/Server 2003 wSP1 or later : select No, not this time , click Next . 2 . Select Install the software automatically (Recommended , then click Next . 3. Click Finish . 4. Repeat steps 1- ...

  • SIIG 04-0343C - page 8

    8 2. Click on the + (plus sign) in front of Ports (COM & LPT) , and CyberSerial PCI 16Cxxx... should be displayed four times. 3 . Double click Multifunction adapters , SIIG CyberPro 4S PCI board should be displayed. To Verify Windows 2000/XP/Server 2003 Installation 1. Right click My Computer , click Manage , then click Device Manager . Windows ...

  • SIIG 04-0343C - page 9

    9 Changing COM Port Address Some serial devices need a specific COM port in order to work. If your serial device works properly, do not change this setting. Windows 95/98/98SE/ME 1. From the Device Manager window double click Ports (COM & LPT) , then double click the CyberSerial PCI serial port you want to change. 2. Click Settings tab, click t ...

  • SIIG 04-0343C - page 10

    10 Blank Page ...

  • SIIG 04-0343C - page 11

    11 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analyst ...

  • SIIG 04-0343C - page 12

    CyberPro PCI 4S is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. Other names used in this publication are for identification only and may be trademarks of their r ...

Manufacturer SIIG Category Computer Hardware

Documents that we receive from a manufacturer of a SIIG 04-0343C can be divided into several groups. They are, among others:
- SIIG technical drawings
- 04-0343C manuals
- SIIG product data sheets
- information booklets
- or energy labels SIIG 04-0343C
All of them are important, but the most important information from the point of view of use of the device are in the user manual SIIG 04-0343C.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals SIIG 04-0343C, service manual, brief instructions and user manuals SIIG 04-0343C. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product SIIG 04-0343C.

Similar manuals

A complete manual for the device SIIG 04-0343C, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use SIIG 04-0343C by users. Manuals are usually written by a technical writer, but in a language understandable to all users of SIIG 04-0343C.

A complete SIIG manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual SIIG 04-0343C - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the SIIG 04-0343C, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the SIIG 04-0343C, that we can find in the current document
3. Tips how to use the basic functions of the device SIIG 04-0343C - which should help us in our first steps of using SIIG 04-0343C
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with SIIG 04-0343C
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of SIIG 04-0343C in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning SIIG 04-0343C?

Use the form below

If you did not solve your problem by using a manual SIIG 04-0343C, ask a question using the form below. If a user had a similar problem with SIIG 04-0343C it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)