English dropdown-ico

Manual Wagner SprayTech FLEXiO 590

21 pages Not applicable
Download

Go to site of 21

Summary
  • Wagner SprayTech FLEXiO 590 - page 1

    English Fr ançais Español 0113 • Form No. 0529835B Owner’s Manual Read this manual for complete instructions Français (page 17) / Español (página 33) Contents 2 Important Safety Information 4 Controls and Functions 6 Material Preparation 7 Assembly 8 Air and Material Controls 9 Spray Pattern Adjustment 10 Proper Spraying Technique 12 Clean ...

  • Wagner SprayTech FLEXiO 590 - page 2

    English 2 © Wagner Spray Tech - All Rights Reserved Important Safety Information Read all safety information before operating the equipment. Save these instructions. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. To reduce the risks of re or explosion, electrical shock and the injury to persons, ...

  • Wagner SprayTech FLEXiO 590 - page 3

    English © Wagner Spray Tech - All Rights Reserved 3 Important Safety Information WARNING - To reduce the risk of injury: 1. Always wear appropriate gloves, eye protection, clothing and a respirator or mask when painting. Hazardous vapors – Paints, solvents, insecticides, and other materials can be harmful if inhaled or come in contact with body. ...

  • Wagner SprayTech FLEXiO 590 - page 4

    English 4 © Wagner Spray Tech - All Rights Reserved Controls and Functions - Model 570 iSpray® Nozzle X-Boost™ T urbine 2-stage Tr igger Spray width lever (for large projects) Ad justment ring 1.5 qt cup X- Boost™ po wer dial (2-speed) Ma terial ow contro l Filter housin g (both sides) Filter Filter X-Boost™ Power Dial: The X-Boost power ...

  • Wagner SprayTech FLEXiO 590 - page 5

    English © Wagner Spray Tech. - All Rights Reserved 5 Controls and Functions - Model 590 Detail Finish Nozzle™ X-Boost™ T urbine Filter housin g (both sides) Filter Filter iSpray® Nozzle 2- stage Tr igger *Spray width lever *A djustment ring 1.5 qt cup X- Boost™ po wer dial (variable speed) (for larger jobs) F unnel (2) Ma terial ow contr ...

  • Wagner SprayTech FLEXiO 590 - page 6

    English 6 © Wagner Spray Tech. - All Rights Reserved Material Preparation Note: Material to be sprayed may need to be strained to remove any impurities in the paint which may enter and clog the system. Impurities in the paint will give poor performance and a poor finish. Note: Only thin the material if absolutely necessary to improve spray perform ...

  • Wagner SprayTech FLEXiO 590 - page 7

    English © Wagner Spray Tech - All Rights Reserved 7 Assembly Before you begin: NEVER point the spray gun at any part of the body. To Assemble: IMPORTANT: Make sure the power cord is unplugged. 1. Insert the suction tube into the intake opening. 2. Align the suction tube - a. If you are going to be spraying in a downward direction, the angled end o ...

  • Wagner SprayTech FLEXiO 590 - page 8

    English 8 © Wagner Spray Tech - All Rights Reserved Air and Material Controls Spray performance will depend upon a number of factors: material thickness, spray pattern selected, and material ow. Testing dierent variations of the control settings will help you achieve the desired results. See descriptions and suggested Air and Material Settin ...

  • Wagner SprayTech FLEXiO 590 - page 9

    English © Wagner Spray Tech - All Rights Reserved 9 Spray Pattern Adjustment Adjust Spray Shape - both nozzles The spray pattern shape is adjusted by turning the adjustment ring (iSpray) or air cap ears (Detail Finish) to either the vertical, horizontal, or diagonal positions. The positions of the air cap and the corresponding spray pattern shapes ...

  • Wagner SprayTech FLEXiO 590 - page 10

    English 10 © Wagner Spray Tech - All Rights Reserved Proper Spraying Technique STOP The room you are spraying must be properly masked in order to prevent overspray from covering woodwork, oors or furnishings. Make sure you have properly masked the room per the instructions on the enclosed “Taping Guide”. If spraying with an air-assisted spr ...

  • Wagner SprayTech FLEXiO 590 - page 11

    English © Wagner Spray Tech - All Rights Reserved 11 Proper Spraying Technique Pattern Examples Use the images and guidelines below in order to assist you in achieving the desired spray pattern for your project. These are meant to be general starting points - you may have to slightly modify certain controls on the system in order to get the exact ...

  • Wagner SprayTech FLEXiO 590 - page 12

    English 12 © Wagner Spray Tech - All Rights Reserved Cleanup Flushing the unit Before you begin: When cleaning, use the appropriate cleaning solution (warm, soapy water for latex materials; mineral spirits for oil-based materials) IMPORTANT: Never clean air cap or air holes in the nozzle with sharp metal objects. Do not use solvents or lubricants ...

  • Wagner SprayTech FLEXiO 590 - page 13

    English © Wagner Spray Tech - All Rights Reserved 13 Cleanup (continued) Cleaning the Nozzle To Clean the Nozzle: 1. Make sure power cord is unplugged. Push the tab below the trigger, twist and separate the nozzle from the turbine. Wipe the exterior of the cup and nozzle until clean. 2. iSpray nozzle only - a. Remove the adjustment ring (a) carefu ...

  • Wagner SprayTech FLEXiO 590 - page 14

    English 14 © Wagner Spray Tech - All Rights Reserved Reassembly To Reassemble: 1. Install the nozzle seal* with the groove (a) (slot) facing toward the nozzle (away from the front end assembly). Insert the nozzle. Make sure to align the groove (b) and notch (c) and align the nozzle opening with the needle. 2. Put the air screen (d) in the air cap ...

  • Wagner SprayTech FLEXiO 590 - page 15

    English © Wagner Spray Tech. - All Rights Reserved 15 Maintenance Cleaning the Filters: IMPORTANT: Before every use, you should inspect the air lters in the turbine to see if it is excessively dirty. If it is dirty, follow these steps to replace it. IMPORTANT: Never operate your unit without the air lters. Dirt could be sucked in and interfe ...

  • Wagner SprayTech FLEXiO 590 - page 16

    English 16 © Wagner Spray Tech. - All Rights Reserved Troubleshooting PROBLEM CAUSE SOLUTION Problem A: Little or no material ow 1. Nozzle clogged. 2. Suction tube clogged. 3. Material ow setting too low. 4. Suction tube loose. 5. Air vent on suction tube blocked. 6. No pressure build up in container. 7. Air valve tube disconnected. 8. Air ? ...

  • Wagner SprayTech FLEXiO 590 - page 17

    English © Wagner Spray Tech. - All Rights Reserved 49 Parts List • Liste de pièces • Lista de piezas English Fr ançais Español 1 2 X-Boost™ Turbine • Turbine de X-Boost™ • Turbina de X-Boost™ # Part No. Nº de piéce Pieza No. English Description Français Description Español Descripción Qty. Qte. Cant. 1 --------- X-Boost Turbi ...

  • Wagner SprayTech FLEXiO 590 - page 18

    Español Français English 50 © Wagner Spray Tech - All Rights Reserved Parts List • Liste de pièces • Lista de piezas 1 8 2 3 4 6 7 5 # Part No. Nº de piéce Pieza No. English Description Français Description Español Descripción Qty. Qte. Cant. 1 0529014 Spray gun assembly (includes items 1-8) Ensemble de pistolet (inclut des pièces 1 ? ...

  • Wagner SprayTech FLEXiO 590 - page 19

    English Fr ançais Español © Wagner Spray Tech - All Rights Reserved 51 Parts List • Liste de pièces • Lista de piezas 1 2 3 4 5 10 11 9 7 8 # Part No. Nº de piéce Pieza No. English Description Français Description Español Descripción Qty. Qte. Cant. 1 0529013 Detail Finish Nozzle assembly (includes items 1-8) Ensemble de buse de Detail ...

  • Wagner SprayTech FLEXiO 590 - page 20

    Español Français English 52 © Wagner Spray Tech - All Rights Reserved Accessories • Accessoires • Accesorios Part No. Nº de piéce Pieza No. English Description Français Description Español Descripción 0529014 iSpray nozzle assembly Ensemble de buse de iSpray Ensamblaje del boquilla de iSpray 0529013 Detail Finish Nozzle™ assembly Ense ...

  • Wagner SprayTech FLEXiO 590 - page 21

    English 56 © Wagner Spray Tech. - All Rights Reserved Limited Warranty HVLP paint spray equipment This product, manufactured by Wagner Spray Tech Corporation (Wagner), is warranted against defects in material and work-manship for one year following date of purchase if operated in accordance with Wagner’s printed recommendations and instructions. ...

Manufacturer Wagner SprayTech Category Paint Sprayer

Documents that we receive from a manufacturer of a Wagner SprayTech FLEXiO 590 can be divided into several groups. They are, among others:
- Wagner SprayTech technical drawings
- FLEXiO 590 manuals
- Wagner SprayTech product data sheets
- information booklets
- or energy labels Wagner SprayTech FLEXiO 590
All of them are important, but the most important information from the point of view of use of the device are in the user manual Wagner SprayTech FLEXiO 590.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Wagner SprayTech FLEXiO 590, service manual, brief instructions and user manuals Wagner SprayTech FLEXiO 590. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Wagner SprayTech FLEXiO 590.

Similar manuals

A complete manual for the device Wagner SprayTech FLEXiO 590, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Wagner SprayTech FLEXiO 590 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Wagner SprayTech FLEXiO 590.

A complete Wagner SprayTech manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Wagner SprayTech FLEXiO 590 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Wagner SprayTech FLEXiO 590, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Wagner SprayTech FLEXiO 590, that we can find in the current document
3. Tips how to use the basic functions of the device Wagner SprayTech FLEXiO 590 - which should help us in our first steps of using Wagner SprayTech FLEXiO 590
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Wagner SprayTech FLEXiO 590
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Wagner SprayTech FLEXiO 590 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Wagner SprayTech FLEXiO 590?

Use the form below

If you did not solve your problem by using a manual Wagner SprayTech FLEXiO 590, ask a question using the form below. If a user had a similar problem with Wagner SprayTech FLEXiO 590 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (1)

GILDA

nON RIESCO A TROVARE IL MANUALE IN iTALIANO