Manual Ingersoll-Rand WG068A-F4

12 pages 0.66 mb
Download

Go to site of 12

Summary
  • Ingersoll-Rand WG068A-F4 - page 1

    ARO OPERATOR’S MANUAL Tool Products INCLUDING: OPERATION, INSTALLATION & MAINTENANCE SECTION M35 MANUAL 41 Released: 6-1-96 3/4” CAPACITY IMPACT WRENCH Model: WG068A-F4-( ) The ARO WG068A-F4 3/4” Impact Wrench is designed for use in the construction industry and in the production of heavy equipment such as locomotive, bulldozers, tractors ...

  • Ingersoll-Rand WG068A-F4 - page 2

    WARNING LABEL IDENTIFICATION FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY. WARNING Always wear eye protection when operating or perform- ing maintenance on this tool. WARNING Always turn off the air supply and disconnect the air supply hose before installing, removing or adjusting any accessory on this tool, or before perform- i ...

  • Ingersoll-Rand WG068A-F4 - page 3

    @35 41 PLACING TOOL IN SERVICE LUBRICATION IRAX No. 50 IRAX No. 100 Always use an air line lubricator with these tools. We recommend the following Filter-Lubricator-Regulator Unit: For USA - IRAX No. C31-06-G00 For International - IRAX No. FRL30-C6-A29 After each eight hours of operation, unless an air line lubricator is used, inject approximately ...

  • Ingersoll-Rand WG068A-F4 - page 4

    MAINTENANCE SECTION ...

  • Ingersoll-Rand WG068A-F4 - page 5

    PART NUMBER FOR ORDERING PART NUMBER FOR ORDERING 1 2 + 3 + 5 + 6 7 8 9 l 10 11 12 13 l 14 15 16 + 17 4 18 19 + 20 21 + 22 23 24 25 26 + 27 Motor Housing Assembly .............. Trigger Assembly .................. Throttle Valve .................... Throttle Valve Seat ................. Throttle Valve Spring ............... Exhaust Deflector ...... ...

  • Ingersoll-Rand WG068A-F4 - page 6

    M35 41 MAINTENANCE SECTION Always wear eye protection when operating or performing maintenance on this tool. Always turn off the air supply and disconnect the air supply hose before installing, removing or adjusting any accessory on this tool, or before performing any maintenance on this tool. LUBRICATION Each time a WG068A-F4 Impact Wrench is disa ...

  • Ingersoll-Rand WG068A-F4 - page 7

    M35 MAINTENANCE SECTION 41 4. 5. 6. 7. 8. The End Plate Dowel (26) will be free to move when the the Front End Plate (25) clears the Housing. Do not lose it. Remove the Rear End Plate Gasket (20). Slide the Front End Plate and Front Rotor Bearing (27) from the Rotor. Remove the Cylinder Dowel (24), Cylinder (23) and Vanes (22) from the Rotor. Using ...

  • Ingersoll-Rand WG068A-F4 - page 8

    M35 MAINTENANCE SECTION 41 3. Place the Reverse Valve Knob (15) on the end of the Valve and, after applying LoctiteB No. 601 to the Reverse Valve Knob Screw (16), fasten the Knob to the Valve with the Screw. Tighten the Knob Screw to 5 to 6 ft-lb (6.75 to 8.15 Nm) torque. Assembly of the Motor 1. 2. 3. 7. 8. 9. Using a sleeve that will contact only ...

  • Ingersoll-Rand WG068A-F4 - page 9

    M35 41 MAINTENANCE SECTION TROUBLESHOOTING GUIDE Double I Probable Cause Low power Motor will not run Tool will not impact Dirty Inlet Bushing or Air Strainer Screen and/or Exhaust Using a suitable cleaning solution, in a well ventilated area, clean Air Strainer Screen, Inlet Silencer Bushing and Exhaust Silencer. Worn or broken Vanes Worn or broke ...

  • Ingersoll-Rand WG068A-F4 - page 10

    M35 41 NOTES ...

  • Ingersoll-Rand WG068A-F4 - page 11

    M35 41 NOTES ...

  • Ingersoll-Rand WG068A-F4 - page 12

    ARO Part of worldwide Ingersoll-Rand M35 41 PN49999-525 ...

Manufacturer Ingersoll-Rand Category Impact Driver

Documents that we receive from a manufacturer of a Ingersoll-Rand WG068A-F4 can be divided into several groups. They are, among others:
- Ingersoll-Rand technical drawings
- WG068A-F4 manuals
- Ingersoll-Rand product data sheets
- information booklets
- or energy labels Ingersoll-Rand WG068A-F4
All of them are important, but the most important information from the point of view of use of the device are in the user manual Ingersoll-Rand WG068A-F4.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Ingersoll-Rand WG068A-F4, service manual, brief instructions and user manuals Ingersoll-Rand WG068A-F4. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Ingersoll-Rand WG068A-F4.

A complete manual for the device Ingersoll-Rand WG068A-F4, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Ingersoll-Rand WG068A-F4 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Ingersoll-Rand WG068A-F4.

A complete Ingersoll-Rand manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Ingersoll-Rand WG068A-F4 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Ingersoll-Rand WG068A-F4, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Ingersoll-Rand WG068A-F4, that we can find in the current document
3. Tips how to use the basic functions of the device Ingersoll-Rand WG068A-F4 - which should help us in our first steps of using Ingersoll-Rand WG068A-F4
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Ingersoll-Rand WG068A-F4
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Ingersoll-Rand WG068A-F4 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Ingersoll-Rand WG068A-F4?

Use the form below

If you did not solve your problem by using a manual Ingersoll-Rand WG068A-F4, ask a question using the form below. If a user had a similar problem with Ingersoll-Rand WG068A-F4 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)