English dropdown-ico

Manual Jumppod OR1213

23 pages 7.27 mb
Download

Go to site of 23

Summary
  • Jumppod OR1213 - page 1

    YJ USA Corp., 3970 Lindbergh Drive Adison, TX 75001 www .jumppod.com 877-928-8777 WARNING ...

  • Jumppod OR1213 - page 2

    ...

  • Jumppod OR1213 - page 3

    3 ...

  • Jumppod OR1213 - page 4

    3. Place the trampoline and trampoline enclosure on a level surface before use. 4. Must place the trampoline on lawn, bark wood chip, sand or cushioning materials. 5. Adequate overhead clearance is essential. A minimum of 7.3 m (24 ft) from ground level is recommended. Provide clearance for wires, tree limbs, and other possible hazards. 6. Maintain ...

  • Jumppod OR1213 - page 5

    5 25. Do not attach anything to the barrier that is not a manufacturer approved accessory or part of the enclosure system. 26. Wear clothing free of drawstrings, hooks, loops, or anything that could get caught in the barrier . 27. Enter and exit the trampoline enclosure only at the door designed for that purpose. 28. Do not attempt to crawl under t ...

  • Jumppod OR1213 - page 6

    6 Note: The ...

  • Jumppod OR1213 - page 7

    ...

  • Jumppod OR1213 - page 8

    ...

  • Jumppod OR1213 - page 9

    ...

  • Jumppod OR1213 - page 10

    ...

  • Jumppod OR1213 - page 11

    the sharply spot. ...

  • Jumppod OR1213 - page 12

    ...

  • Jumppod OR1213 - page 13

    ...

  • Jumppod OR1213 - page 14

    1 4 ...

  • Jumppod OR1213 - page 15

    15 1. Make sure you understand the information in the box at the top of this page before you begin assembling the trampoline. Lay three T op T ubes (1), (2) and (3) on the ground as shown. Make sure there is a T-connector (4) on T op Tube (1, A marking with bigger end), Socket(7) on the Top Tube(2, B marking with bigger end) and T-connector(4) on t ...

  • Jumppod OR1213 - page 16

    16 ３ F rame Holes V-rings 8 10 10 10 10 S p r i n gs (10) 22 Hook the V-ring V-ring 8 10 10 F rame Black webbing with yellow line No yellow line 3. Lay the Bed (8) on the ground inside of the assembled frame. Make sure that the two warn- ing decals (not shown) are on top of the Bed. Note: There are V -rings around the edge of th e Bed (8) and hol ...

  • Jumppod OR1213 - page 17

    17 4 4. Lay the Frame Pad (9) on the frame. Do not use the trampoline without the Frame Pad (9) , which is designed to reduce the likelihood of injury to the user from coming in con- tact with the trampoline frame. If you do not have a Frame Pad, call our Customer Hot Line toll-free at 877-927-8777, Monday-Friday,8 a.m. -5 p.m. Central Time.(Exclud ...

  • Jumppod OR1213 - page 18

    6. Using the included plastic tie, attach the Safety Placard (11) to the frame near the point where jumpers will climb onto and off the trampoline. The trampoline is now fully assembled. Make sure that all parts are securely attached. Familiarize yourself and all users of the tram- poline with the safety precautions, use and instructional materials ...

  • Jumppod OR1213 - page 19

    10. Attach the other three Pole(16,17) in the same way. See inset drawing. 10 19 １６ １７ １１ 1 1. Lay out T op G3 Pole (18), joint each section Connector to a straight line as shown. Assemble the remaining T op G3 Pole (18) in the same way . Spread the Netting (20) on the trampoline bed, insert a T op G3 Pole (18) into the opening of T op ...

  • Jumppod OR1213 - page 20

    Attach the first hanging point at the upper edge of the Netting (20) with the G3 Pole (18) to the Hemisphere Cap (19) of T op enclosure pole(17). Attach a second hanging point directly across the Netting (20) from the first hanging point. Attach the other two hanging point halfway between the first two hanging points, so four hanging points are att ...

  • Jumppod OR1213 - page 21

    15. Using the included plastic tie,attach the Safety Placard(10)to the Netting(20) near the door as shown. The trampoline/enclosure is now fully assembled. Make sure that all parts are securely attached. Familiarize yourself and all users of the trampo- line/enclosure with the safety precautions, use and instructional materials, and care and mainte ...

  • Jumppod OR1213 - page 22

    22 It is possible for the trampoline/enclosure be blown about by high wind. If you anticipate high winds, the trampoline/enclosure should be moved to a sheltered location, disassembled, or tied down to the ground with ropes and stakes (not included). At least three ropes and three stakes should be used. The tops of the stakes should be at ground le ...

  • Jumppod OR1213 - page 23

    1 4 T op Tu be(With T-connector, A marking) 2 4 Top Tube(With Socket, B marking) 3 4 Top Tube(With T-connector, C marking) 4 8 T-Connector 5 8 Leg Extension 6 4 Center 7 4 Socket 8 1 Stitched Bed with V-ring 9 1 Frame Pad 1 58 U-bolts 16 4 Bottom enclosure pole 17 4 Top enclosure pole 18 2 G3 Pole (Black) 10 60 5.5” Springs 19 4 Hemisphere Cap ( ...

Manufacturer Jumppod Category Fitness Equipment

Documents that we receive from a manufacturer of a Jumppod OR1213 can be divided into several groups. They are, among others:
- Jumppod technical drawings
- OR1213 manuals
- Jumppod product data sheets
- information booklets
- or energy labels Jumppod OR1213
All of them are important, but the most important information from the point of view of use of the device are in the user manual Jumppod OR1213.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Jumppod OR1213, service manual, brief instructions and user manuals Jumppod OR1213. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Jumppod OR1213.

Similar manuals

A complete manual for the device Jumppod OR1213, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Jumppod OR1213 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Jumppod OR1213.

A complete Jumppod manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Jumppod OR1213 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Jumppod OR1213, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Jumppod OR1213, that we can find in the current document
3. Tips how to use the basic functions of the device Jumppod OR1213 - which should help us in our first steps of using Jumppod OR1213
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Jumppod OR1213
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Jumppod OR1213 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Jumppod OR1213?

Use the form below

If you did not solve your problem by using a manual Jumppod OR1213, ask a question using the form below. If a user had a similar problem with Jumppod OR1213 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)