-
Chicago Electric 43150 - page 1
6-FUNCTION MET AL DETECT OR 43150 SET UP AND OPERA TING INSTRUCTIONS Visit our website at http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2000 by Harbor Freight T ools ® . All rights reserved. No portion of this manual or any artwork contain ...
-
Chicago Electric 43150 - page 2
Page 2 For technical questions, please call 1-800-444-3353. SKU 43150 SA VE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures. Write the product’ s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product ha ...
-
Chicago Electric 43150 - page 3
Page 3 For technical questions, please call 1-800-444-3353. SKU 43150 This enables better control of the power tool in unexpected situations. Power tool use and care 3. Do not use the power tool if the a. switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. Remove the batter ...
-
Chicago Electric 43150 - page 4
Page 4 For technical questions, please call 1-800-444-3353. SKU 43150 is any question about a condition being safe of unsafe, do not operate the T ool. Keep the Metal Detector away from 8. any lights, TVs, computers, and moble telephones. These can all cause electromagnetic interference. Only the Search Coil (27) and 9. plastic section of the Lower ...
-
Chicago Electric 43150 - page 5
Page 5 For technical questions, please call 1-800-444-3353. SKU 43150 SPECIFICA TIONS Electrical Input 6 AA Batteries (not included) Earphone Jack 3.5 mm mini-jack Socket Functions Battery Check Light; Ferrous Metal Detector; T une Adjuster; One-T ouch Auto T one; V olume Control UNP ACKING When unpacking, make sure the item is intact and undamaged ...
-
Chicago Electric 43150 - page 6
Page 6 For technical questions, please call 1-800-444-3353. SKU 43150 OPERA TING INSTRUCTIONS Read the ENTIRE IMPORT ANT SAFETY INFORMA TION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. T ool Set Up TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL OPERA TION: T urn the Power S ...
-
Chicago Electric 43150 - page 7
Page 7 For technical questions, please call 1-800-444-3353. SKU 43150 Note: Y ou can extend battery life by using earphones, which require less power than the built-in speaker . Note: T o check the battery power , set the Mode Switch to BA TT TEST . If the dial on the View Meter does not uctuate on the BA TT TEST range, replace batteries. See Fi ...
-
Chicago Electric 43150 - page 8
Page 8 For technical questions, please call 1-800-444-3353. SKU 43150 Before Getting Started Before beginning an outside search, you must test the unit with samples of metal. Use the following: an iron nail • a ve-cent coin (nickel) • a one-cent penny (zinc coin, after • 1982) a silver quarter • Place the Metal Detector on a wooden or pl ...
-
Chicago Electric 43150 - page 9
Page 9 For technical questions, please call 1-800-444-3353. SKU 43150 Reset the balance of the Metal 5. Detector . Bring the nickel coins close to the 6. Search Coil. The indicator will move to the left and the sound will get softer . Bring the silver coins close to the Search Coil. The indicator will move to the right and the sound will get louder ...
-
Chicago Electric 43150 - page 10
Page 10 For technical questions, please call 1-800-444-3353. SKU 43150 General Operating Instructions Once all the proper tests and adjustments have been made, the Metal Detector is ready to be used outdoors. NOTE: Make sure Metal Detector is properly balanced before use. NOTE: Be sure to keep the angle between the Search Coil and the Detector ’s ...
-
Chicago Electric 43150 - page 11
Page 1 1 For technical questions, please call 1-800-444-3353. SKU 43150 If there is interference from similar 1. metal detectors in your searching area, lower the DISCRIMINA TION and adjust the TUNE setting to stop the interference. Y ou may also need to rebalance the Metal Detector . If there is interference from electrical 2. cables, TV , radio, ...
-
Chicago Electric 43150 - page 12
Page 12 For technical questions, please call 1-800-444-3353. SKU 43150 Part Description Qty 1 Button Cover 1 2 T uning Button 1 3 Left Handle Cover 1 4 Right Handle Cover 1 5 Screw (ST2.9 x 12) 1 6 Nut (M3) 1 7 Control Box Lid 1 8 View Meter 1 9 Speaker Bushing 1 10 Speaker 1 11 Control Knobs 3 12 PCB Board 1 13 Lining Board 1 14 Bushing 1 15 Screw ...
-
Chicago Electric 43150 - page 13
Page 13 For technical questions, please call 1-800-444-3353. SKU 43150 ASSEMBL Y DIAGRAM Record Product’ s Serial Number Here: Note: If product has no serial number , record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts. ...
Do you have a question concerning Chicago Electric 43150?
Use the form below
If you did not solve your problem by using a manual Chicago Electric 43150, ask a question using the form below. If a user had a similar problem with Chicago Electric 43150 it is likely that he will want to share the way to solve it.