English dropdown-ico

Manual Cisco Systems 6400

54 pages 0.5 mb
Download

Go to site of 54

Summary
  • Cisco Systems 6400 - page 1

    A-1 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 APPENDIX A Attribute Reference This section references all object s and their attributes that are us ed by the Cisco 6400 Equipment Module. The attribute tables in this section f ollow a con v ention that will help you eas ily identify i mportant information such as deri v ed v alues an ...

  • Cisco Systems 6400 - page 2

    A-2 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e Table Conventions Table Conventions The follo wing codes describe attribute beha viour . They appear on a separate line in the attrib ute column for each attribute. Note Some attributes contain restrictio ns or dependencies that are out of the scope of t ...

  • Cisco Systems 6400 - page 3

    A-3 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference Network T able A -3 Networ k Attributes Acceptable Va l u es Default V alues Name [srname] This is the network name. This name must be unique across all netw orks. M, C Te x t ( 6 4 ) Customer [vpn] This is the customer name. This attrib ute is optional. W ...

  • Cisco Systems 6400 - page 4

    A-4 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e RADIUS Server RADIUS Server Object Name: C4rdRadius O AF: C4rdRadius.oaf Resource Map [srrmmap] This attrib ute is an integer used to carry a bit map of services supported by this Network. W Numb (10) Range=0-214748 3647 48 Pre-provisioned [srp reprov] I ...

  • Cisco Systems 6400 - page 5

    A-5 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference RADIUS Server RADIUS Radius V ersion [c4_rad_ver] This is the RADIUS v ersion. Cisco Provision ing Center support s Merit RADIUS v ersion 3.6B. R Enum (14) "none" "Merit_AAA_3.6 B" Primary RADIUS Radius User Name [c4_rad_use r1] Specify ...

  • Cisco Systems 6400 - page 6

    A-6 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e RADIUS Server Backup Radius Server [c4_ra d_name2] This is the name of the backup RADI US server . Y o u can use the hostname or the IP address of the RADIUS server . W Te x t ( 3 2 ) Backup Radius Auth Port [c4_ra d_authport2] This is the authentication ...

  • Cisco Systems 6400 - page 7

    A-7 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference Node Node Object Name: C4ndNode O AF: C4ndNode.oaf Ta b l e A - 5 N o d e Attributes Acceptable Va l u es Default V alues Common Attributes Name [srname] This is the node name. After the node is sa ved and committed to the database, this f ield will be rea ...

  • Cisco Systems 6400 - page 8

    A-8 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e Node Containing Region [srarea] The name of the administrativ e area containing the router (a LA T A, for example). This attrib ute is optional. W Te x t ( 3 2 ) Geographical Loc ation [srgeogloc] This is the geographical location of the rout er (for e x ...

  • Cisco Systems 6400 - page 9

    A-9 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference Physica l Port Physical Port Object Name: C4alA CLProf OA F : C 4 a l A C L P r o f . o af Access User Name [c4_accname] This is the same v alue as the NSP Management Access username config ured on the NSP . M | C Te x t ( 3 2 ) Access Password [c4_accpass ...

  • Cisco Systems 6400 - page 10

    A-10 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e Physical Port T able A -6 Physical P ort Attributes Acceptable V alues Default V alues Common Attributes Name [srname] This is the physical port n ame. M | C Te x t ( 2 4 ) Customer [vpn] This is the customer name. W Te x t ( 1 6 ) Domain [domain] This ...

  • Cisco Systems 6400 - page 11

    A-11 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference Physica l Port EMS Name [sremsname] The name of the physical port used i n the Element Management System. R Administrative State [sradminst atus] Indicates the administra tiv e state of the physical port prof ile. R Enum (8) Locked, Unlocked Resource Mode ...

  • Cisco Systems 6400 - page 12

    A-12 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e Logical P ort Logical Port Object Name: C4alA CLProf OA F : C 4 a l A C L P r o f . o af 6400 Phy sical Port Parameters Access Name [c4_accname ] The IOS account name for the NRP/NRP2 associated with this port. W Te x t ( 3 2 ) Access Password [c4_accpa ...

  • Cisco Systems 6400 - page 13

    A-13 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference Logical Port Domain [domain] This is the domain name. W Te x t ( 1 6 ) Protocol [srprotocol] Specify the protocol. M T ext (10) "A TM" Signalling Role [srsignallingrole] A DCE logical port represents the "netw ork side" equipment. This ...

  • Cisco Systems 6400 - page 14

    A-14 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e Logical P ort Priority [srpriority] The logical port usage priority . W Numb (10) Range=0-214748 3647 0 Multiple Service Ra nges [srmultirange] Indicates if the logical port has multiple service ranges. W Bool (5) Multiple Fabric Ra nges [sremultirange] ...

  • Cisco Systems 6400 - page 15

    A-15 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference Logical Port EMS Name [sremsname] The name of the logical port used in the Element Management Sy stem. R Te x t ( 6 5 ) Bandwidth Incoming Maximum (kbits/s) [sraz_bandwidth] The maximum incoming bandwi dth for the logical port. W Numb (10) Range=0-214748 ...

  • Cisco Systems 6400 - page 16

    A-16 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e Cross Connection Cross Connection Object Name: C4vcPvcx O AF: C4vcPvcx.oaf 6400 NRP Specific Routing [c4_routing] Specify whether to enable or d isable routing. W Bool (5) T unneling [c4_tunneling] Specify whether to enable or d isable tunneling. W Bool ...

  • Cisco Systems 6400 - page 17

    A-17 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference Cross Connection T able A -8 Cross Connection Attributes Acceptable Va l u es Default V alues Common Attributes Name [srname] Specify a name fo r the cross-co nnection. M | C Te x t ( 6 4 ) Customer [vpn] This is the customer . This attrib ute is optional ...

  • Cisco Systems 6400 - page 18

    A-18 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e Cross Connection T r ansit Cost [srcost] This is the cost of crossi ng the sub-network. This attrib ute is used by the Threader to determine the lowest co st path when threading a service. M Numb (10) Range=0-214748 3647 0 A TM LPort Associations A Endp ...

  • Cisco Systems 6400 - page 19

    A-19 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference Cross Connection Circuit T ype [ratype] Specify the circuit type. It can be either a virtual circuit (VP) or virtual path (VP). C | P Enum (2) "VC" "VP" Class of Service [raqos ] Y ou can specify the class of service fo r A TM traff ic ...

  • Cisco Systems 6400 - page 20

    A-20 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e Cross Connection Maximum Burst Size (cells) [raaz_mbs] MBS is the maximum num ber of cells that can b e recei ved at the PCR. This allo ws a burst of cells to arri ve at a rate higher than the SCR. If the burst i s larger than anticipated, the additiona ...

  • Cisco Systems 6400 - page 21

    A-21 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference Cross Connection Minimum Cell Rate (cells/s) [raza_mcr] MCR is the minimum cell rate, which is the minimum all ocated bandwidth for a connection. W | P Numb (10) Range=0-214748 3647 0 Maximum Burst Size (cells) [raza_mbs] MBS is the maximum num ber of cel ...

  • Cisco Systems 6400 - page 22

    A-22 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e NRP Internal PVC NRP Internal PVC Object Name: C4cxPvcx O AF: C4cxPvcx.oaf T able A -9 NRP Inte r nal PV C Attributes Acceptable V alues Default V alues Common Attributes Name [srname] Specify a name for the cross c onnection. M | C Te x t ( 3 0 ) Custo ...

  • Cisco Systems 6400 - page 23

    A-23 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference NRP Internal PVC CNX T ype [c4_type] This is the CNX type. W Enum (11) subscriber , service , multihop_in, idsl_sub, pppip, other Service Name [c 4_servicename] This attrib ute is used only on a Subscriber C4CNX-Static Domain binding. W Te x t ( 3 2 ) Sub ...

  • Cisco Systems 6400 - page 24

    A-24 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e NRP Internal PVC Next-Hop IP Ad dress [c4_remtipaadr] The IP address of the remote en d of the PVC sub interf ace. W Te x t ( 1 5 ) Upper Layer Proto col [c4_protocol] This is the upper layer prot ocol type. W Enum (14) ip_broadcast, ip_nobroadc ast, in ...

  • Cisco Systems 6400 - page 25

    A-25 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference Singlehop Tunnel Singlehop Tunnel Object Name: C4mtT unnel O AF: C4mtTunnel.oaf Authentication [c4_au thenticate] This is the authentication type. W ms-chap, pap, chap, callin, optional, one-time (or a combination of t hese in the correct sequence) Unnumb ...

  • Cisco Systems 6400 - page 26

    A-26 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e Multihop Tunnel Multihop Tunnel Object Name: C4mtT unnel O AF: C4mtTunnel.oaf T u nnel Name [tunnel name] The is the tunnel named used for au thentication at a remote site./ W Te x t ( 3 2 ) T u nnel Password [password] This is the tunnel passw ord. W T ...

  • Cisco Systems 6400 - page 27

    A-27 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference Multihop Tunnel Remote T unnel Name [rtunnel] The tunnel name for the coun terpart at the LA C. This attrib ute applies to only MHIT). W Te x t ( 6 4 ) Remote T unnel Password [rpassword] The remote tunnel passw ord (MHIT only). W Te x t ( 3 2 ) Authentic ...

  • Cisco Systems 6400 - page 28

    A-28 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e Aggregation Key Aggregation Key Object Name: C4akAggrKe y O AF: C4akAggrKe y .oaf T able A -12 A ggregation Ke y Attributes Acceptable V alues Default V alues Customer [vpn] This is the customer name. This attrib ute is optional. Te x t ( 1 6 ) Domain [ ...

  • Cisco Systems 6400 - page 29

    A-29 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference Singlehop Tunnel Destination Singlehop Tunnel Destination Object Name: C4tdTnldest O AF: C4tdTnldes t.oaf Common Parameters Aggregation Key [aggrk ey] This is the type of aggre gation ke y . Te x t ( 6 4 ) Aggregation T ype [aggrtype ] This is the cost of ...

  • Cisco Systems 6400 - page 30

    A-30 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e Multihop Tunnel Destination Multihop Tunnel Destination Object Name: C4tdTnldest O AF: C4tdTnldes t.oaf Authenticator Sp ecific Parameters Destination IP Address [dest_ip] The destination IP address. W Te x t ( 1 5 ) Session Limit [sessionlimit] The lim ...

  • Cisco Systems 6400 - page 31

    A-31 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference Service List Service List Object Name: C4slSservlist O AF: C4slSservlist.oaf T u nnel Specific Parameters Destination IP Address [dest_ip] The destination IP address. This is the IP address of the LNS. W Te x t ( 1 5 ) Session Limit [sessionlimit] The max ...

  • Cisco Systems 6400 - page 32

    A-32 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e IOS QOS IOS QOS Object Name: C4iqQos OA F : C 4 i q Q os . o a f Service List Parameters Subscriber ID [subsc riberid] Specify the subscriber ID. W Te x t ( 6 4 ) Service Name [servicename] This is the serv ice asso ciated with the tunnel. W Te x t ( 2 ...

  • Cisco Systems 6400 - page 33

    A-33 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference VC Class VC Class Object Name: C4clVCClass O AF: C4clVC Class.oaf PCR [pcr] PCR is the maximum allo wed cell transmission rate. It defines the shortest time period between cells and pr ovides the highes t guarantee t hat netw ork performanc e objecti ves ...

  • Cisco Systems 6400 - page 34

    A-34 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e VC Class Customer [vpn] This is the customer . This attrib ute is optional. W Te x t ( 1 6 ) VC-Class Parameters VC-Class Name [vcclassname] This is the VC-Class name as in IOS. By default, this v alue is autocalculated, but a v a lue ca n be supplied. ...

  • Cisco Systems 6400 - page 35

    A-35 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference VC Class Encapsulation [en capsulation] Specify the A TM adaptation layer (a al) and the encapsulation type. C Enum (12) "aal5ciscoppp" "aal5autoppp" "aal5snap" "aal5mux" "aal5nlpid" Used In [c4_use] This ...

  • Cisco Systems 6400 - page 36

    A-36 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e Virtual Template Virtual Template Object Name: C4vtVT OA F : C 4 v t V T . o a f Virtual T emplate Parameters Authentication [authentication] This is the authentication type . When none is selected, no authentication will be perfo rmed. P AP will enab l ...

  • Cisco Systems 6400 - page 37

    A-37 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference Virtual Template Virtual T emplate Parameters Virtual-T emplate index [vtindex] This is the virtual template in dex number th at is auto assigned b y IOS. A Numb (4) Range=0-200 0 0 Description [c4_description] This is a te xt f ield pro vided for a usag ...

  • Cisco Systems 6400 - page 38

    A-38 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e Access Control List Access Control List T able A -19 Access Contr ol List Attributes Acceptable V alues Default V alues Common Attributes Domain [domain] Customer [vpn] Profile [srprofile.sy_profname] Control List Parameters Access Control List ID [acl_ ...

  • Cisco Systems 6400 - page 39

    A-39 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference Access Control Element Access Control Element T able A -20 Access Control Element Attributes Acceptable V alues Default V alues Common Attributes Domain [domain] Customer [vpn] Access Control Element Para meters Service Name [a ce_service] Source T ype [s ...

  • Cisco Systems 6400 - page 40

    A-40 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e Route Entry Route Entry Destination Mask [dest_mask] Contained By Access Control List [c4acl.acl_id] Lport [nrp.srname] Node [srno de.srname] Network [srnode.srnetwork.sr name] T able A -20 Access Con trol Element (continu ed) Attributes Acceptable V al ...

  • Cisco Systems 6400 - page 41

    A-41 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference Authenticator Authenticator IP Address [ip_address] Netmask [mask] Mapping T arget [targ et] Contained/Carried By LPORT [c4lport.srname] Node [c4lport.srnod e.srname] Network [c4lport.srnetwo rk.srname] T able A -21 Route Entry (continued) Attributes Acce ...

  • Cisco Systems 6400 - page 42

    A-42 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e Physical Port Profile Physical Port Profile Profile [srprofile.sy_profname] Authenticator Sp ecific Parameters Username [usernam e] ‘ Password [password] The password for authentication. W Te x t ( 2 5 5 ) Encrypted [encry pted] Use this attrib ute to ...

  • Cisco Systems 6400 - page 43

    A-43 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference Physical Port Profile Customer [vpn] This is the customer name. W Te x t ( 1 6 ) Domain [domain] This is the domain name. W Te x t ( 1 6 ) Port T ype [srpor ttype] Indicates the type of port. W Enum (5) DS3, OC3, OC12, CPU, NRP , NRP2, Other Provisionable ...

  • Cisco Systems 6400 - page 44

    A-44 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e Logical Port Profile Logical Port Profile Object Name: C4lpLportProf ile O AF: C4lpLportProfile.oa f Access Password [c4_accpasswd] The IOS account passwor d for the NR P/NRP2 associated with this port. W Te x t ( 3 2 ) Enable Password [c4_enab lepasswd ...

  • Cisco Systems 6400 - page 45

    A-45 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference Logical Port Pr ofile Signalling Role [srsignallingrole] A DCE logical port represents the "n etwork side" equi pment. This logical port type supports all t ypes of PVCs. A DTE is almost identical to the DCE logical port e xcept for SVC applicat ...

  • Cisco Systems 6400 - page 46

    A-46 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e Logical Port Profile Multiple Fabric Ra nges [sremultirange] Indicates if there are multiple fabr ic ranges for th e logical port. W Bool (5) Multiple Reserved Ra nges [srmultiresrange Indicated if there are multiple rese rved ranges for the logical por ...

  • Cisco Systems 6400 - page 47

    A-47 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference Logical Port Pr ofile Bandwidth Incoming Maximum (kbits/s) [sraz_bandwidth] The maximum incoming bandwi dth for the logical port. W Numb (10) Range=0-2147483 64 7 Nominal Threshold (%) [sraz_cbnt] Specify the incoming committed bandwid th nominal threshol ...

  • Cisco Systems 6400 - page 48

    A-48 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e Cross Connection Profile Cross Connection Profile Object Name: C4vcPvcxProf O AF: C4vcPvcxProf.oaf Host Name [c4_hostname] The host name for the NRP/NRP2 a sso ciated with the logica l port. M | R Te x t ( 3 2 ) IOS V ersion [c4_iosversion] Specifies th ...

  • Cisco Systems 6400 - page 49

    A-49 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference Cross Connection Profile Recovery Priority [srpriority] This is the recov ery priority for NNI resilienc y .The lower the v alue, the higher the priority; 0 ha ving inf initely lo w priority , and 1 having the highest priority . M Numb (10) Range=0-214748 ...

  • Cisco Systems 6400 - page 50

    A-50 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e Cross Connection Profile Sustainable Cell Rate (cells/s) [raaz_scr] SCR is the maximum a verage cell transmission rate that is all owed ov er a gi ven perio d of time on a gi ven circuit. It allo ws the network to allocate suf ficient resources for guar ...

  • Cisco Systems 6400 - page 51

    A-51 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference Cross Connection Profile Sustainable Cell Rate (cells/s) [raza_scr] SCR is the maximum average cell transmission rate that is allowed over a given period of ti me on a given circuit. It allows the network to allocate suffic ient resources for guaranteeing ...

  • Cisco Systems 6400 - page 52

    A-52 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e NRP Internal PVC Profile NRP Internal PVC Profile Object Name: C4cxPvcxProf O AF: C4cxPvcxProf.oaf 6400 NSP Specific A to Z Usage Parameter Control [c 4az_upc] This is the usage parameter control type. Enum (4) pass, t ag, drop, none Cast T ype [c4az_ca ...

  • Cisco Systems 6400 - page 53

    A-53 Cisco 6400 Equipment Module Configuration Guide OL-1812-01 Appendix A Attribute Reference NRP Internal PVC Profile CNX T ype [c4_type] Specify the connection type. This at tribute i s used to determine what function the internal PVC will hav e. An NRP/NRP2 internal PVC can serve sev e ral role s. It can be a su bscriber downlink i n volved in ...

  • Cisco Systems 6400 - page 54

    A-54 Cisco 6400 Equipment Modul e Configuration Guide OL-1812-01 Appendix A Attribute Referenc e NRP Internal PVC Profile PCR [c4_pcr] PCR is the maximum allo wed cell transmission rate. It defines the shortest time period between cells and pro vides the highest guarantee that network p erformance objecti ves (based on cell loss ratio) will be met. ...

Manufacturer Cisco Systems Category Network Card

Documents that we receive from a manufacturer of a Cisco Systems 6400 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- 6400 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems 6400
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems 6400.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems 6400, service manual, brief instructions and user manuals Cisco Systems 6400. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems 6400.

Similar manuals

A complete manual for the device Cisco Systems 6400, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems 6400 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems 6400.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems 6400 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems 6400, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems 6400, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems 6400 - which should help us in our first steps of using Cisco Systems 6400
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems 6400
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems 6400 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems 6400?

Use the form below

If you did not solve your problem by using a manual Cisco Systems 6400, ask a question using the form below. If a user had a similar problem with Cisco Systems 6400 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)