Manual Teledex SIP LD4210S

10 pages 0.87 mb
Download

Go to site of 10

Summary
  • Teledex SIP LD4210S - page 1

    SIP LD4100/4200 Series User Guide WHEN USING YOUR TELEPHONE EQUIPMENT , BASIC SAFETY PRECAUTIONS SHOULD AL WA YS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: 1. READ AND UNDERST AND ALL INSTRUCTIONS. 2. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE PRODUCT . 3. UNPLUG THE PRODUCT FROM T ...

  • Teledex SIP LD4210S - page 2

    1. Introduction to the T eledex iPhone SIP LD Series IP Phone 3 1.1 Definitions, acronyms and abbreviations 3 1.2 The SIP LD Series works like a telephone 3 1.3 T wo lines 3 1.4 The network 3 1.5 The IP-PBX 3 1.6 The network system administrator 3 2. Installing the SIP LD Series IP phone 3 2.1 A Matter of Safety 3 2.2 V ersions of the SIP LD Serie ...

  • Teledex SIP LD4210S - page 3

    1. Introduction to the T eledex iPhone SIP LD Series IP Phone The T ele dex iP hone SI P LD s eries I P phon e is a SIP-co mpliant network terminal. Instead of using standard analog or digital telephone lines, it connects to the network in the same manner as computers and printers do. The voice and control signals to and from the SIP LD series phon ...

  • Teledex SIP LD4210S - page 4

    2.4 Connecting the Handset Plug one end of the coil cord into the RJ-10 receptacle on the handset, and the other end into the receptacle on the left side of the base. Place the handset into the cradle of the base. 2.5 Connecting the SIP LD Series to the network W ARNING! Risk of electrical shock! Dangerous voltages may be present on the terminals o ...

  • Teledex SIP LD4210S - page 5

    Figure 2 shows the welcome page of the configuration portal. The phone can be configured through the main menu provided by this portal. NOTE: Except for upgrading the software online (decribed in subsection 3.2.7), the configuration for the SIP LD series will not be activated until the phone has been reset. Fig 2: T eledex iPhone Configuration ...

  • Teledex SIP LD4210S - page 6

    3.2.5 Configure the Call Featur es (Fig. 6) The configurable call features include Do Not Disturb, Call T ransfer , Call Forward No Answer , Call Forward Busy , Call Waiting, and Call Forward All. A call forward extension number can be pre-configured. A description of each feature is below: Do Not Disturb: The phone will not ring upon any incomi ...

  • Teledex SIP LD4210S - page 7

    Fig 9: Reset the Phone 3.2.9 Restore to Factory Configuration T o restore the phone to the factory (default) configuration via the configuration portal, follow these steps: 1. Click “Restore to Factory” on the left menu. 2. Click “Restore” to restore factory settings. 4. Using the SIP LD Series IP Phone After the SIP LD series has been c ...

  • Teledex SIP LD4210S - page 8

    4.7 TRANSFERRING A CALL Note: This feature will not be valid unless it is enabled. The ND2210S can transfer an ongoing call to another phone on the same network if this feature is enabled through web portal configuration. T o transfer a call: 1. Press the FLASH key; this will place the call on hold and activate the second line. 2. Dial the number ...

  • Teledex SIP LD4210S - page 9

    5.4 Three-W ay Conference Calls The SIP LD series supports three-way conference calling. The CONF or FLASH key allows the user to include two other parties in a three-way conversation. One three-way conference could be done using only one line or both lines. 5.4.1 Initiating a Three-W ay Conference Call With One Line 1. Place or receive the first ...

  • Teledex SIP LD4210S - page 10

    Power Power supplied from network switch (PoE), or from approved local power adapter Dimensions & Weight W : 9.0” (22.86 cm) D: 8.5” (21.59 cm) H: 6.47” (16.43 cm) full upright position 3.97” (10.08 cm) full flat position Wt: 2.80 lb. (1.27 Kg) 9. Appendix C – Product Support If you need technical assistance with this product, please ...

Manufacturer Teledex Category Telephone

Documents that we receive from a manufacturer of a Teledex SIP LD4210S can be divided into several groups. They are, among others:
- Teledex technical drawings
- SIP LD4210S manuals
- Teledex product data sheets
- information booklets
- or energy labels Teledex SIP LD4210S
All of them are important, but the most important information from the point of view of use of the device are in the user manual Teledex SIP LD4210S.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Teledex SIP LD4210S, service manual, brief instructions and user manuals Teledex SIP LD4210S. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Teledex SIP LD4210S.

A complete manual for the device Teledex SIP LD4210S, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Teledex SIP LD4210S by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Teledex SIP LD4210S.

A complete Teledex manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Teledex SIP LD4210S - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Teledex SIP LD4210S, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Teledex SIP LD4210S, that we can find in the current document
3. Tips how to use the basic functions of the device Teledex SIP LD4210S - which should help us in our first steps of using Teledex SIP LD4210S
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Teledex SIP LD4210S
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Teledex SIP LD4210S in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Teledex SIP LD4210S?

Use the form below

If you did not solve your problem by using a manual Teledex SIP LD4210S, ask a question using the form below. If a user had a similar problem with Teledex SIP LD4210S it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)