English dropdown-ico

Manual Hoshizaki KM-61BAH

22 pages 0.37 mb
Download

Go to site of 22

Summary
  • Hoshizaki KM-61BAH - page 1

    SELF-CONT AINED CRESCENT CUBER INSTRUCTION MANUAL KM-61BAH KM-101BAH KM-151BAH KM-151BWH L1M006102 (100109) ...

  • Hoshizaki KM-61BAH - page 2

    IMPORT ANT Only qualified service technicians should install, service and maintain the product. No installation, service or maintenance should be undertaken until the technician has thoroughly read this Instruction Manual. Likewise, the owner/manager should not proceed to operate the product until the installer has instructed them on its proper ope ...

  • Hoshizaki KM-61BAH - page 3

    IMPORT ANT 1. This booklet is an integral and essential part of the product and should be handed over to the user . Read the warnings contained in this booklet carefully as they give important indications regarding the safety of the installation, use and maintenance. Please preserve this booklet for any further consultation that may be necessary . ...

  • Hoshizaki KM-61BAH - page 4

    1 I. Specifications A. Nameplate Rating Model Amperes Refrigerant ARI Energy Star KM-61BAH 3.4 AMPS R134a 7.1 oz. Not applicable Not applicable KM-101BAH 5.2 AMPS R134a 7.8 oz. Applicable Applicable KM-151BAH 7.0 AMPS R134a 8.5 oz. Applicable Applicable KM-151BWH 7.0 AMPS R134a 10.3 oz. Applicable Not applicable See the Nameplate for electrical an ...

  • Hoshizaki KM-61BAH - page 5

    2 B. Dimensions/Connections 1. KM-61BAH Unit: mm [inches] ...

  • Hoshizaki KM-61BAH - page 6

    3 2. KM-101BAH Unit: mm [inches] ...

  • Hoshizaki KM-61BAH - page 7

    4 3. KM-151BAH Unit: mm [inches] ...

  • Hoshizaki KM-61BAH - page 8

    5 4. KM-151BWH Unit: mm [inches] ...

  • Hoshizaki KM-61BAH - page 9

    6 II. Installation and Operating Instructions A. Checks Before Installation * V isually inspect the exterior of the shipping container , and any severe damage noted should be reported to the carrier . IMPORT ANT 1. Remove shipping carton, tape(s) and packing. If packing material is left in the icemaker , it will not work properly . 2. Ensure all co ...

  • Hoshizaki KM-61BAH - page 10

    7 C. Location W ARNING This icemaker is not intended for outdoor use. Normal operating ambient temperature should be within +45°F to +100°F (+7°C to +38°C); Normal operating water temperature should be within +45°F to +90°F (+7°C to +32° C). Operation of the icemaker , for extended periods, outside of these normal temperature ranges may aff ...

  • Hoshizaki KM-61BAH - page 11

    8 * The icemaker requires no clearance at either side. But allow enough space at rear for water supply and drain connections, at least 12” (approx. 30 cm) clearance at front, and at least 0.6” (approx. 15 mm) clearance at top for maintenance. D. Electrical Connection W ARNING THIS APPLIANCE MUST BE GROUNDED. This icemaker requires a ground that ...

  • Hoshizaki KM-61BAH - page 12

    9 F . W ater Supply and Drain Connections - See Fig. 4 CAUTION T o prevent damage to equipment, do not operate this icemaker when the water supply is OFF , or if the pressure is below 10 PSIG (0.7 bar). Do not run the icemaker until proper water pressure is reached. * Water supply inlet is 1/2” female pipe thread (FPT). * A water supply line shut ...

  • Hoshizaki KM-61BAH - page 13

    10 * Drain lines should not be piped directly to the sewer system. An air gap of a minimum of 2 vertical inches (5 cm) should be between the end of the drain pipes from the icemaker and the floor drain. * This icemaker should be installed in accordance with applicable national, state and local regulations. * A plumbing permit and services of a lice ...

  • Hoshizaki KM-61BAH - page 14

    11 Fig. 5 KM-151BWH Icemaking W ater Supply Inlet 1/2” FPT Bin Drain Outlet 3/4” FPT Condenser W ater Outlet 1/2” FPT Condenser W ater Inlet 1/2” FPT Shut-off V alve Drain V alve Shut-off V alve Drain V alve T wo-inch (5 cm) air gap Drain Floor Separate piping to approved drain. Leave a two-inch (5 cm) vertical air gap between the end of ea ...

  • Hoshizaki KM-61BAH - page 15

    12 G. Final Checklist 1) Is the icemaker level? 2) Is the icemaker in a site where the ambient temperature is within +45°F to +100°F (+7° C to +38°C) and the water temperature within +45°F to +90°F (+7°C to +32°C) all year around? 3) Is there at least 0.6” (15 mm) clearance at top of the icemaker for ease of maintenance or service? 4) Hav ...

  • Hoshizaki KM-61BAH - page 16

    13 H. Startup CAUTION 1. All parts are factory-adjusted. Improper adjustments may result in failure. 2. If the unit is turned of f, wait for at least 3 minutes before restarting the icemaker to prevent damage to the Compressor . * Check that shipping tape(s), string and packing are removed before starting the icemaker . 1) Open the W ater Supply Li ...

  • Hoshizaki KM-61BAH - page 17

    14 III. Cleaning and Maintenance Instructions IMPORT ANT Ensure all components, fasteners and screws are securely in place after any maintenance or cleaning is done to the equipment. A. Cleaning W ARNING 1 . Hoshizaki recommends cleaning this unit at least once a year . More frequent cleaning, however , may be required in some existing water condit ...

  • Hoshizaki KM-61BAH - page 18

    15 7) Same as step 4. 8) Move the Control Switch to the “ICE” position to fill the W ater T ank with water . 9) After 3 minutes, move the Control Switch to the “W ASH” position. 10) After 5 minutes, move the Control Switch to the “OFF” position. 1 1) Same as step 4. 12) Repeat steps 8 through 1 1 three more times to rinse thoroughly . ...

  • Hoshizaki KM-61BAH - page 19

    16 16) W ash the Bin Control Switch, W ater T ank, Float Switch, Cube Guide, Silicone Hose and Overflow Pipe by using a nylon scouring pad, brushes and the cleaning solution. In addition to the removed parts, also wash the bin liner and Bracket (L) (R) with the solution. 17) Discard the cleaning solution and rinse the parts thoroughly with water . ...

  • Hoshizaki KM-61BAH - page 20

    17 3) Discard the sanitizing solution and rinse the parts thoroughly with water . 4) Replace the removed parts in their correct positions in the reverse order of which they were removed. 5) Same as step 1. 6) Pour the sanitizing solution into the W ater T ank, and allow the sanitizer to sit for 10 minutes. 7) Move the Control Switch to the “WASH? ...

  • Hoshizaki KM-61BAH - page 21

    18 3. Air Filter The plastic mesh Air Filter removes dirt or dust from the air , and keeps the Condenser from getting clogged. As the filter gets clogged, the icemaker ’s performance will be reduced. Check the filter at least twice a month. When it is clogged, use warm water and a neutral cleaner to wash the filter . 4. Condenser Check the Con ...

  • Hoshizaki KM-61BAH - page 22

    19 8) Quickly blow the potable water supply line out using compressed air or carbon dioxide. 2. Drain the potable W ater T ank: 1) T urn off the power supply at the breaker box. 2) Move the Control Switch on the Control Box to the “OFF” position. 3) Open the Door . Disconnect the Silicone Hose to drain the water . See Fig. 6. 4) Reconnect the S ...

Manufacturer Hoshizaki Category Ice Maker

Documents that we receive from a manufacturer of a Hoshizaki KM-61BAH can be divided into several groups. They are, among others:
- Hoshizaki technical drawings
- KM-61BAH manuals
- Hoshizaki product data sheets
- information booklets
- or energy labels Hoshizaki KM-61BAH
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hoshizaki KM-61BAH.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hoshizaki KM-61BAH, service manual, brief instructions and user manuals Hoshizaki KM-61BAH. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hoshizaki KM-61BAH.

Similar manuals

A complete manual for the device Hoshizaki KM-61BAH, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hoshizaki KM-61BAH by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hoshizaki KM-61BAH.

A complete Hoshizaki manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hoshizaki KM-61BAH - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hoshizaki KM-61BAH, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hoshizaki KM-61BAH, that we can find in the current document
3. Tips how to use the basic functions of the device Hoshizaki KM-61BAH - which should help us in our first steps of using Hoshizaki KM-61BAH
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hoshizaki KM-61BAH
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hoshizaki KM-61BAH in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hoshizaki KM-61BAH?

Use the form below

If you did not solve your problem by using a manual Hoshizaki KM-61BAH, ask a question using the form below. If a user had a similar problem with Hoshizaki KM-61BAH it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)