English dropdown-ico

Manual Wright Manufacturing 31897

23 pages 0.24 mb
Download

Go to site of 23

Summary
  • Wright Manufacturing 31897 - page 1

    Commercial Mower Owner’s Manual For the Wright Z serial #31897 and higher until superseded WARNING: READ THIS MANUAL BEFORE USING For your safety and for proper operation and maintenance read carefully and keep readily ava ilable for future reference. Revised 06/2007 Additional replacement owner’ s manuals as well as illustrated part s lists ar ...

  • Wright Manufacturing 31897 - page 2

    Foreword Welcome to the progressive group of mowing professionals who use Wright mowers. We are focused on giving you advanced engineering and quality construction in each mower we build. This manual explains the features and promotes safer use of the mower. Please read it in its entirety and follow the instructions carefully so that you can have m ...

  • Wright Manufacturing 31897 - page 3

    TABLE OF CONTENTS PRE-DELIVERY SERVICE OF MOWER BY DEALER ............................................................. 1 SAFETY INSTRUCTIONS ......................................................................................................... 3 I NTRODUCTION ...................................................................................... ...

  • Wright Manufacturing 31897 - page 4

    * * This Page Intentionally Left Blank * * ...

  • Wright Manufacturing 31897 - page 5

    1 Pre-Delivery Service of Mower by Dealer If you are not completely famili ar with the Safety Instruction Manual read it now before pr oceeding with the Pre-Delivery Service of the mower. Only your authorized Wright dealer should perform the Pre-Delivery Service of the mower. WARNING The Wright Z is shipped assembled and has bee n adjusted and test ...

  • Wright Manufacturing 31897 - page 6

    2 • Before starting the engine be ready to stop it if the wheels begin to turn with the brake on. (If this happens, check that the manual bypass valves on side of each pump are open at least a half-a-turn counterclockwise.) • Start the engine according to the engine manufacturer’s recommendation. Let the engine run at low RPM for several minu ...

  • Wright Manufacturing 31897 - page 7

    3 SAFETY INSTRUCTIONS WRIGHT MOWER USERS & OWNERS: RE AD THIS MANUAL BEFORE USING PLEASE BE CAREFUL! CAUTION This symbol with the word “CAUTION” indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury. WARNING This symbol with the word “WARNING” indicates a potentially hazardous situat ...

  • Wright Manufacturing 31897 - page 8

    4 WARNING User Clothing DO NOT operate the mower while wearing sandals, tennis shoes, sneakers, or shorts. Always wear long non-baggy pants. Wear high- top leather steel-toed work boots with thick, textured tread, soft-rubber soled at all times. Hard or smooth soled shoes are too slippery for a good footing on mower platform. NEVER wear loose-fitti ...

  • Wright Manufacturing 31897 - page 9

    5 direct the grass discharge toward bystanders, traffic, cars or buildings nor allow anyone within 50 feet of the machine while in operation. Thrown objects can pass through glass wind ows and some walls of buildings. There is extreme risk of danger from thrown objects or being cut by the blades of the mower. Never operate the mower in an enclosed ...

  • Wright Manufacturing 31897 - page 10

    6 Operation In Reverse Keep both feet on the foot platform at all times. Look behind you before backing to prevent injuring yourself or anyone behind you. Operate the mower very slowly, inching it backward until you become familiar with how the mower operates. Always operate slowly if in an awkward location or position. While backing up never place ...

  • Wright Manufacturing 31897 - page 11

    7 WARNING depending on mowing environment, operator driving style and preference. • To reduce the chances of “popping-a-wheelie”, do not accelerate quickly. Note: Excessively worn tire tread is dangerous. Replace tire(s) with less than 3/32” of any tread groove left. Use tires with the tread pattern recommended by Wright Mfg., Inc. only. Ke ...

  • Wright Manufacturing 31897 - page 12

    8 ...

  • Wright Manufacturing 31897 - page 13

    9 OPERATING INSTRUCTIONS WARNING If you are not completely famili ar with the Safety Instruction Manual read it now before pro ceeding with the operation of the mower. REMEMBER THERE ARE CERTAIN PRECAUTIONS LISTED IN THIS MANUAL THAT YOU MUST NOW TAKE BEFORE STARTING THE MOWER. Inspect Mower Before Each Use Inspection of Mower : Do not use the mowe ...

  • Wright Manufacturing 31897 - page 14

    10 slightly, forward and backward. Check to see if t he wheels move forward and backward according to the position of the levers. If not, check to see that the pump release valves are closed. The pump release valves are accessible by lifting the seat. With both f eet still firmly placed on the foot platform, increase the engine speed to about half ...

  • Wright Manufacturing 31897 - page 15

    11 How to Adjust Neutral Neutral refers to the mower movement when the engine is set to full throttle, parking brake is off, and the control levers are in the neutral position. The mower should not move forward or backward during this time. If the mower is moving forward or rearward, the neutral setting must be adjusted. The hydraulic pump has a Re ...

  • Wright Manufacturing 31897 - page 16

    12 WARNING Service and Adjustments Tire Maintenance and Pressure Excessively worn tire tread is dangerous on all hills. Replace drive tires with less than 3/32” of any tread groove left. Use tires with the tread pattern recommended by Wright Mfg., Inc. only. Keep the tire pressure in the drive tires between 18 and 22 psi. Higher pressures w ill c ...

  • Wright Manufacturing 31897 - page 17

    13 battery charger for proper and safe charging of the battery. Always make sure the Positive terminal is connected to the Positive battery post and the Negative terminal is connected to the Negative battery post. Reversal could cause damage to the electrical system. Cleaning the Mower The underside of the mower deck should be checked and cleaned t ...

  • Wright Manufacturing 31897 - page 18

    14 ...

  • Wright Manufacturing 31897 - page 19

    15 Maintenance Interval Chart MA I NTENANC E I TEM E N G I N E I T E M S S E E N O T E B E L O W FI R S T 8 H O U R S D A I L Y E V E R Y 2 5 H O U R S E V E R Y 1 0 0 H O U R S E V E R Y 2 0 0 H O U R S E V E R Y 3 0 0 H O U R S A N N U A L L Y I nspect f or cr acks i n fr am e, cutt er deck or other st eel part s *3 XX I nspect al l bel ts for we ...

  • Wright Manufacturing 31897 - page 20

    16 ...

  • Wright Manufacturing 31897 - page 21

    17 Maintenance Record Dat e M ai nt enance/ Servi ce Perf ormed Un it Ho u r s Shop/ T echni ci an ...

  • Wright Manufacturing 31897 - page 22

    18 Wright Manufactur ing, Inc. ( herein after: WMI) warra nts to t he origin al owner th at the new WMI mower accompanying this document will be free from manufacturing d efects in mat erials or workmanship subject to the following limitations and exclusions. Any part of the WMI commerc ial mower manufactured by WMI and found , in the reasonabl e j ...

  • Wright Manufacturing 31897 - page 23

    4600X Wedgewood Blvd Frederick, MD 21703 www.wrightmfg.com ...

Manufacturer Wright Manufacturing Category Lawn Mower

Documents that we receive from a manufacturer of a Wright Manufacturing 31897 can be divided into several groups. They are, among others:
- Wright Manufacturing technical drawings
- 31897 manuals
- Wright Manufacturing product data sheets
- information booklets
- or energy labels Wright Manufacturing 31897
All of them are important, but the most important information from the point of view of use of the device are in the user manual Wright Manufacturing 31897.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Wright Manufacturing 31897, service manual, brief instructions and user manuals Wright Manufacturing 31897. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Wright Manufacturing 31897.

Similar manuals

A complete manual for the device Wright Manufacturing 31897, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Wright Manufacturing 31897 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Wright Manufacturing 31897.

A complete Wright Manufacturing manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Wright Manufacturing 31897 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Wright Manufacturing 31897, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Wright Manufacturing 31897, that we can find in the current document
3. Tips how to use the basic functions of the device Wright Manufacturing 31897 - which should help us in our first steps of using Wright Manufacturing 31897
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Wright Manufacturing 31897
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Wright Manufacturing 31897 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Wright Manufacturing 31897?

Use the form below

If you did not solve your problem by using a manual Wright Manufacturing 31897, ask a question using the form below. If a user had a similar problem with Wright Manufacturing 31897 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)