-
Extron electronics IPL T SF24 - page 1
Extron Electronics, USA 1230 South Lewis Street Anaheim, CA 92805 USA 714.491.1500 Fax 714.491.1517 Extron Electronics, Europe Beeldschermweg 6C 3821 AH Amersfoort The Netherlands +31.33.453.4040 Fax +31.33.453.4050 Extron Electronics, Asia 135 Joo Seng Road, #04-01 PM Industrial Building Singapore 368363 +65.6383.4400 Fax +65.6383.4664 Extron Elec ...
-
Extron electronics IPL T SF24 - page 2
Precautions This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product's enclosure that may present a risk of electric shock. Caution Read In ...
-
Extron electronics IPL T SF24 - page 3
IPL T SF24 and IPL T SFI244 • Quick Start Guide T o install and set up an IPL T SF24 or SFI244 interface, follow these steps: Step 1 T urn all of the equipment of f and disconnect it from the power source. Step 2 Mount the IPL T interface , on a device, under a desktop, or on a rack shelf, as illustrated below . Step 3 Attach the network (LAN) ca ...
-
Extron electronics IPL T SF24 - page 4
IPL T SF24 and IPL T SFI244 • Quick Start Guide Quick Start Guide — IPL T SF24, IPL T SFI244, cont’d IPL T SF24 and IPL T SFI244 • Table of Contents Chapter 1 • Introduction .......................................................... 1-1 About this Manual ................................................................ 1-2 About the IPL T ...
-
Extron electronics IPL T SF24 - page 5
IPL T SF24 and IPL T SFI244 • Table of Contents IPL T SF24 and IPL T SFI244 • Table of Contents T able of Contents, cont’d Appendix A • Specifications, Part Numbers, and Accessories ............................................................................. A-1 Specifications ............................................................... ...
-
Extron electronics IPL T SF24 - page 6
IPL T SF24 and SFI244 1 Chapter One Introduction About this Manual About the IPL T SF24 and SFI244 Interfaces Features ...
-
Extron electronics IPL T SF24 - page 7
IPL T SF24 and IPL T SFI244 • Introduction Introduction IPL T SF24 and IPL T SFI244 • Introduction (Extron part # 60-190-01 ). They can also be mounted under a desk or podium top, or on a projector mount. The IPL T interfaces ship with an external, desktop, 12VDC, 1A power supply (Extron part # 28-071-01 ), that accepts 100-240V AC input. Featu ...
-
Extron electronics IPL T SF24 - page 8
IPL T SF24 and IPL T SFI244 • Introduction Introduction, cont’d IPL T SF24 and SFI244 2 Chapter T wo Installation and Operation Installation Overview Mounting the IPL T Interface Rear Panel Features and Cabling Operation Easily configured and controlled — • Using a standard W eb browser (Internet Explorer V5.5, Netscape V6.0 or higher) and ...
-
Extron electronics IPL T SF24 - page 9
IPL T SF24 and IPL T SFI244 • Installation and Operation IPL T SF24 and IPL T SFI244 • Installation and Operation Installation and Operation 2-3 Figure 2-1 — Rack mounting the interface on the VersaTools shelf (SFI244 model shown) Only products in the IPT ools ™ or V ersaT ools lines can be mounted to a V ersaT ools shelf. Any 1U rack-mount ...
-
Extron electronics IPL T SF24 - page 10
IPL T SF24 and IPL T SFI244 • Installation and Operation IPL T SF24 and IPL T SFI244 • Installation and Operation Installation and Operation, cont’d 2-5 Rear Panel Features and Cabling All connections, including power , input and output, and control, are on the r ear panel of the IPL T SF24 and IPL T SFI244. See figures 2-4 and 2-5. Figure 2- ...
-
Extron electronics IPL T SF24 - page 11
IPL T SF24 and IPL T SFI244 • Installation and Operation IPL T SF24 and IPL T SFI244 • Installation and Operation Installation and Operation, cont’d 2-7 Serial communication 3 Flex I/O ports — Four I/O ports permit connection of switches and sensors to provide input to the system, and contact closure activation of relays for power , screen, ...
-
Extron electronics IPL T SF24 - page 12
IPL T SF24 and IPL T SFI244 • Installation and Operation Installation and Operation, cont’d IPL T SF24 and IPL T SFI244 • Installation and Operation 2-9 Information flows both ways through the IPL T SF24 and SFI244 interfaces, but control only goes from the LAN connection to the serial ports. See figure 2-10. Figure 2-10 — Control / Informa ...
-
Extron electronics IPL T SF24 - page 13
IPL T SF24 and IPL T SFI244 • Installation and Operation IPL T SF24 and IPL T SFI244 • Installation and Operation Installation and Operation, cont’d If the Reset button is continuously held down, every 3 seconds the LED will pulse (blink) and put the unit in a different mode, corresponding to the underscor ed notes in Modes 3 through 5. The M ...
-
Extron electronics IPL T SF24 - page 14
IPL T SF24 and IPL T SFI244 • Installation and Operation Installation and Operation, cont’d IPL T SF24 and SFI244 3 Chapter Thr ee Connection and Configuration Connecting the Hardware Configuring the Hardware 2-12 • If the events ar e curr ently stopped following the momentary (<1 second) press, the Power LED will flash twice indicating th ...
-
Extron electronics IPL T SF24 - page 15
IPL T SF24 and IPL T SFI244 • Connection and Configuration IPL T SF24 and IPL T SFI244 • Connection and Configuration Connection and Configuration, cont’d 3-3 Serial connection The IPL T interface can be connected to any existing A/V product that has a serial control port. Figure 3-2 — Typical IPL T SFI244 Serial connection 1 . Connect one ...
-
Extron electronics IPL T SF24 - page 16
IPL T SF24 and IPL T SFI244 • Connection and Configuration IPL T SF24 and IPL T SFI244 • Connection and Configuration Connection and Configuration, cont’d 3-5 Configuring the Hardwar e T o function together properly , both the controlling PC and the IPL T interfaces must be configured correctly: the PC must be network-capable, with the proper ...
-
Extron electronics IPL T SF24 - page 17
IPL T SF24 and IPL T SFI244 • Connection and Configuration IPL T SF24 and IPL T SFI244 • Connection and Configuration Connection and Configuration, cont’d After issuing this command, the unit will change to the new address and start responding to the ping r equests, as shown below . The IPL T unit’s IP addr ess should now be updated to the ...
-
Extron electronics IPL T SF24 - page 18
IPL T SF24 and IPL T SFI244 • Connection and Configuration Connection and Configuration, cont’d IPL T SF24 and SFI244 4 Chapter Four Communication and Control Ports Overview Communication with the Interface Programmer’s Guide for the Telnet and Web Browser Customization A/V Device Control Troubleshooting 3-8 4. Select Internet Protocol (TCP/I ...
-
Extron electronics IPL T SF24 - page 19
IPL T SF24 and IPL T SFI244 • Communication and Control IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d Digital input When a Flex I/O port is configured as a digital input, the port is set to measure two states: 1 or 0; On or Off; high or low . A closed circuit = a logic 1 and an open circuit = a logi ...
-
Extron electronics IPL T SF24 - page 20
IPL T SF24 and IPL T SFI244 • Communication and Control IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d 4-5 Analog input When a Flex I/O port is configured as an analog input, the port can measure 0 to 25.3VDC with 12bit accuracy . A DC level will be indicated by a count from 0-4096 ( 6mv/count). Figu ...
-
Extron electronics IPL T SF24 - page 21
IPL T SF24 and IPL T SFI244 • Communication and Control IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d will not happen the first time you access the interface, as no password is set at the factory). Figure 4-8 — Web server Password window 3. The System Status page (figure 4-9) is displayed, showing ...
-
Extron electronics IPL T SF24 - page 22
IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d IPL T SF24 and IPL T SFI244 • Communication and Control Controlling IR devices or sending IR commands (SFI244 only) In order to send IR commands to IR devices via the default W eb pages, do the following: 1. Select the File Management tab and the File Ma ...
-
Extron electronics IPL T SF24 - page 23
IPL T SF24 and IPL T SFI244 • Communication and Control IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d 4-11 T o clear a password, enter a single space, repeat the entry , and press ‘Submit’. If there is no administrator password, your user password will not be saved. Editing and adding e-mail ale ...
-
Extron electronics IPL T SF24 - page 24
IPL T SF24 and IPL T SFI244 • Communication and Control IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d 4-13 4-12 c. Click Save to keep changes to recipient e-mail addresses and file names. CA UTION File names must end with an .eml extension. Due to the 7 character limit for full file names, it’ s a ...
-
Extron electronics IPL T SF24 - page 25
IPL T SF24 and IPL T SFI244 • Communication and Control IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d 4-14 IP L T S F I2 44 1 R 100 COM T X IR LINK ACT 2 R X R T S C T S 2 4 1 3 2 4 I/O IR 2-12" 15 deg. (typ) 2. Click the Browse button to locate the file you want to upload. 3. Click the Upload ...
-
Extron electronics IPL T SF24 - page 26
IPL T SF24 and IPL T SFI244 • Communication and Control IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d 4-17 4-16 At this point the driver is populated with unlearned functions. T o learn driver functions: 1. Select those functions that are to be learned (see figure 4-20). Then begin a learning sessio ...
-
Extron electronics IPL T SF24 - page 27
IPL T SF24 and IPL T SFI244 • Communication and Control IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d 4-19 X18 = Hardwar e (MAC) address (xx-xx-xx-xx-xx-xx). X19 = Subnet mask (xxx.xxx.xxx.xxx); leading zer os in each of four fields are optional in setting values, and are suppr essed in returned val ...
-
Extron electronics IPL T SF24 - page 28
IPL T SF24 and IPL T SFI244 • Communication and Control IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d 4-21 4-20 X38 = Event data size: b = bit; B = byte (8 bit); S = short (16 bit); L = long (32 bit) This parameter is case sensitive. X39 = Event data to write. X40 = I/O mode: 0 = input; 1 = output; ...
-
Extron electronics IPL T SF24 - page 29
IPL T SF24 and IPL T SFI244 • Communication and Control IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d 4-23 4-22 Command/response table for Simple Instruction Set (SIS) commands Command ASCII (T elnet) URL Encoded (W eb) Response Bidirectional Serial Data port Send data string Esc X1 * X17 * X20 * X2 ...
-
Extron electronics IPL T SF24 - page 30
IPL T SF24 and IPL T SFI244 • Communication and Control IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d 4-25 4-24 Command ASCII ( T elnet) URL Encoded (W eb) Response IP Setup Commands Set Unit name 24 Esc X12 CN W X12 CN| Ipn• X12 Set Unit name to factory default 24 Esc •CN W%20CN| Ipn• X49 Rea ...
-
Extron electronics IPL T SF24 - page 31
IPL T SF24 and IPL T SFI244 • Communication and Control IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d 4-27 4-26 Command ASCII ( T elnet) URL Encoded (Web) Response IP Setup Commands, continued Clear user password 24 Esc •CU W%20 CU| Ipu• Read user password 24 Esc CU WCU| X33 Set verbose mode Esc ...
-
Extron electronics IPL T SF24 - page 32
IPL T SF24 and IPL T SFI244 • Communication and Control IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d Customization In the IPL T interface family , varying degrees of customization are possible. Server side includes make it possible to obtain information from the unit and display the information on ...
-
Extron electronics IPL T SF24 - page 33
IPL T SF24 and IPL T SFI244 • Communication and Control IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d Figure 4-23 — Example of SSI “remote” command In figure 4-23 above, a “remote” serial command sends the word “hello” and will wait up to 50ms for a response (until three characters are ...
-
Extron electronics IPL T SF24 - page 34
IPL T SF24 and IPL T SFI244 • Communication and Control IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d <html> <head><title>Example 2</title></head> <h2><b>HTML Example 2</b></h2> <body> The following lines demonstr ate how to send commands t ...
-
Extron electronics IPL T SF24 - page 35
IPL T SF24 and IPL T SFI244 • Communication and Control IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d Example 3 The next example shows how the flex I/O outputs can be controlled using a query string and the SIS commands. Figure 4-28a — HTML source code using a query string Figure 4-28b — Browser ...
-
Extron electronics IPL T SF24 - page 36
IPL T SF24 and IPL T SFI244 • Communication and Control IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d Example 5 This example demonstrates how to send out an IR string from the IPL T SFI244. The line below shows an HTML hyperlink with an Extron IR command encoded into the URL. <a href=”index.htm ...
-
Extron electronics IPL T SF24 - page 37
IPL T SF24 and IPL T SFI244 • Communication and Control IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d Figure 4-31b — Browser view URL encoding URL encoding is the method of using ASCII hexadecimal characters to display specific characters in a URL. URL encoding is used for several reasons. On some ...
-
Extron electronics IPL T SF24 - page 38
IPL T SF24 and IPL T SFI244 • Communication and Control IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d 4. If passwords were set up for the connected system, you will be prompted to log in as Administrator or User . Otherwise the system will respond with a <cr/lf>. Figure 4-33 — Connecting to ...
-
Extron electronics IPL T SF24 - page 39
IPL T SF24 and IPL T SFI244 • Communication and Control IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d 4-43 4-42 4. Send serial commands directly through the selected COM port to the attached A/V device. 5. Close the T elnet session to end the direct access session. Y ou can force the dir ect access ...
-
Extron electronics IPL T SF24 - page 40
IPL T SF24 and IPL T SFI244 • Communication and Control Communication and Control, cont’d IPL T SF24, IPL T SFI244 • Specs, Part Numbers, Accessories A Appendix A Specifications, Part Numbers, and Accessories Specifications Parts 4-44 ...
-
Extron electronics IPL T SF24 - page 41
IPL T SF24, IPL T SFI244 • Specifications, Part #s, Accessories IPL T SF24, IPL T SFI244 • Specifications, Part #s, Accessories Specifications, Part Numbers, Accessories, cont’d Digital inputs Input voltage range ......... 0-24VDC, clamped at +30VDC Input impedance .............. 28 kohms Programmable pullup ..... 2 kohms to +5VDC Threshold l ...
-
Extron electronics IPL T SF24 - page 42
IPL T SF24, IPL T SFI244 • Specifications, Part #s, Accessories Specifications, Part Numbers, Accessories, cont’d IPL T SF24 and IPL T SFI244 • Glossary B Appendix B Glossary or or A-4 or or Parts Included parts Included parts Replacement part number IPL T SFI244 60-544-06 IPL T SF24 60-544-02 12VDC, 1A external power supply (U.S., Can) 70-05 ...
-
Extron electronics IPL T SF24 - page 43
IPL T SF24 and IPL T SFI244 • Glossary IPL T SF24 and IPL T SFI244 • Glossary Glossary B-3 Global V iewer (GV) is a set of W eb pages (HTML, XML, JS) and graphics that are loaded into the memory of an IPL. These pages provide an interface for controlling devices attached to the IPL. They communicate with the event scripts running on the IPL, an ...
-
Extron electronics IPL T SF24 - page 44
IPL T SF24 and IPL T SFI244 • Glossary IPL T SF24 and IPL T SFI244 • Glossary Glossary , cont’d B-5 B-4 Pass-through allows control systems to work with the IPL and provides a link between two ports. Ping is a utility that tests network connections. It is used to determine if the host has an operating connection and is able to exchange inform ...
Do you have a question concerning Extron electronics IPL T SF24?
Use the form below
If you did not solve your problem by using a manual Extron electronics IPL T SF24, ask a question using the form below. If a user had a similar problem with Extron electronics IPL T SF24 it is likely that he will want to share the way to solve it.