English dropdown-ico

Manual Pelco MC3800

12 pages 0.17 mb
Download

Go to site of 12

Summary
  • Pelco MC3800 - page 1

    MC3800 Series 1/3-Inch Monochr ome Camera Installation/ Operation Manual C1901M (4/99) Pelco • 3500 Pelco Way • Clovis , CA 93612-5699 USA • www.pelco.com In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150 International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120 ...

  • Pelco MC3800 - page 2

    2 Pelco Manual C1901M (4/99) IMPOR T ANT SAFEGUARDS AND W ARNINGS 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes. 2. T o pre v ent fire or shock hazard, do not e xpose the unit to rain or moisture . DESCRIPTION The MC3800 Series cameras are 1/3-inch format monochrome CCD (charge coupl ...

  • Pelco MC3800 - page 3

    Pelco Manual C1901M (4/99) 3 NOTE: References to illus- trations in this manual are keyed to the illustrations in the manual that is supplied with the camera. MC3800-2 MC3800-2X MC3800-3 10 11 10 11 13 12 3 4 5 6 7 8 9 2 1 LOCA TION AND FUNCTION OF P ARTS Refer to Illustration B for the location of the camera parts. B T op/Front/Side/Rear V iews of ...

  • Pelco MC3800 - page 4

    4 Pelco Manual C1901M (4/99) D Changing the Plug on an Auto Iris Lens Cable 2 3 4 1 1 2 3 4 Cover (supplied) Auto-iris lens cable Rib (If the cable is thick and the plug cover does not seat properly , cut away this rib.) Lens plug (supplied) 42 1 3 Pin # DC-servo Lens Pin 3: Drive (+) Pin 1: Control (-) Pin 2: Control (+) Pin 4: Drive (-) (Ground) ...

  • Pelco MC3800 - page 5

    Pelco Manual C1901M (4/99) 5 E C CS 2 1 4 3 Lens Installation A CCD-IRIS ON OFF CCD-Iris Function ...

  • Pelco MC3800 - page 6

    6 Pelco Manual C1901M (4/99) NOT A V AILABLE ON 3800 SERIES Incident Light LENS CAMERA (STYLIZED) Iris opening (sometimes referred to as aperture) is defined by f/stop numbers. The higher the number the more closed the iris is. IRIS CCD IMAGER CCD Iris (Electronic Shutter) CCD out- put voltage is electronically sampled and used to adjust for small ...

  • Pelco MC3800 - page 7

    Pelco Manual C1901M (4/99) 7 Information Box Information Box LENS TYPE MANUAL IRIS V ARIABLE LIGHT CONDITIONS ST A TIC LIGHT CONDITIONS AUT O IRIS • Turn Manual Iris ring so iris is fully open and set the Focus ring for ∞ (or distant object). • Adjust Backfocus with CCD IRIS switch initially set to the OFF position. • Use the C/CS adjust- m ...

  • Pelco MC3800 - page 8

    8 Pelco Manual C1901M (4/99) Information Box Information Box The purpose of backfocusing is to make the adjustments necessary for the picture to remain in focus throughout the camera’s zoom range, which is the case for instance, in motorized zoom, auto iris configurations. Manual Iris lens/camera combinations also need to be backfocused. Follow t ...

  • Pelco MC3800 - page 9

    Pelco Manual C1901M (4/99) 9 G Connecting the Monitor to the MC3800 Series Cameras F Connecting the MC3800-2 12 3 1 2 CAMERA Install the camera where it will not be affected by fluorescent lights or window reflections. If the camera is used under illumination that is not steady , the picture may flicker . The MC3800-2 must be operated with a 24 V A ...

  • Pelco MC3800 - page 10

    10 Pelco Manual C1901M (4/99) I V ertical Phase V ertical phase adjustment is not vertical roll adjustment. Each camera is adjusted to the AC zero crossover point at the factory . Problems arise, however, especially in larger systems, when: 1. Switching rapidly between widely separated cameras with manual or sequential switchers. 2. Switching betwe ...

  • Pelco MC3800 - page 11

    Pelco Manual C1901M (4/99) 11 INCIDENT LIGHT LEVEL ADJUSTMENT Since the incident light level has been preset at the factory , usually no further adjustment is required. If the picture is too dark, however , or if the picture’s highlights are extremely overexposed, adjust the LEVEL adjustment screw . This adjustment can only be used for auto-iris ...

  • Pelco MC3800 - page 12

    12 Pelco Manual C1901M (4/99) REVISION HISTOR Y Manual # Date Comments C1901M 1 1/96 Original version. 4/99 Added MC3800-2X model. Revised manual to new format. ® Pelco and the Pelco logo are registered trademarks of Pelco. © Copyright 1999, Pelco. All rights reserved. Power Consumption: MC3800-2: Approximately 4.5 W MC3800-2X: Approximately 4.5 ...

Manufacturer Pelco Category Home Security System

Documents that we receive from a manufacturer of a Pelco MC3800 can be divided into several groups. They are, among others:
- Pelco technical drawings
- MC3800 manuals
- Pelco product data sheets
- information booklets
- or energy labels Pelco MC3800
All of them are important, but the most important information from the point of view of use of the device are in the user manual Pelco MC3800.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Pelco MC3800, service manual, brief instructions and user manuals Pelco MC3800. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Pelco MC3800.

Similar manuals

A complete manual for the device Pelco MC3800, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Pelco MC3800 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Pelco MC3800.

A complete Pelco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Pelco MC3800 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Pelco MC3800, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Pelco MC3800, that we can find in the current document
3. Tips how to use the basic functions of the device Pelco MC3800 - which should help us in our first steps of using Pelco MC3800
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Pelco MC3800
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Pelco MC3800 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Pelco MC3800?

Use the form below

If you did not solve your problem by using a manual Pelco MC3800, ask a question using the form below. If a user had a similar problem with Pelco MC3800 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)