English dropdown-ico

Manual Dell E04J001

70 pages 4.7 mb
Download

Go to site of 70

Summary
  • Dell E04J001 - page 1

    Dell™ PowerV ault™ MD1200 and MD1220 Storage Enclosures Hardware Owner’ s Manual Regulatory Model: E03J Se ries and E04J Series Regulatory T ype: E03J001 and E04J001 book.book Page 1 Monday, December 7, 2009 4:51 PM ...

  • Dell E04J001 - page 2

    Notes, Cautions, and W arnings NOTE: A NOTE indicates important information that helps you make better use of your computer . CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A W ARNING indicates a potential for property damage, personal injury , or death. ____________________ Info ...

  • Dell E04J001 - page 3

    Contents 3 Contents 1 About Y our Enclosure . . . . . . . . . . . . . . . . 7 Front-Panel Featu res and Indicators . . . . . . . . . . . 7 Front-Bezel Featur es and Indicators . . . . . . . . . . . 9 Hard-Drive Indicator Patterns . . . . . . . . . . . . . . 11 Back-Panel Features and Indicators . . . . . . . . . . 12 Enclosure Management Module . . ...

  • Dell E04J001 - page 4

    4 Contents Downloading Firmware . . . . . . . . . . . . . . . . . 26 3 Installing Enclosure Components . . . . . 27 Recommended T ools . . . . . . . . . . . . . . . . . . . 27 Front Bezel (Optional) . . . . . . . . . . . . . . . . . . 27 Removing the Front Bezel . . . . . . . . . . . . . . 27 Installing the Front Bezel . . . . . . . . . . . . . . 2 ...

  • Dell E04J001 - page 5

    Contents 5 Installing the Backplane . . . . . . . . . . . . . . 47 4 T roubleshooting Y our Enclosure . . . . . . . 49 Safety First—For Y ou and Y our Enclosure . . . . . . . 49 T roubleshooting Enclosure Startup Failure . . . . . . . 49 T roubleshooting Loss of Communication . . . . . . . . 49 T roubleshooting External Connections . . . . . . . ...

  • Dell E04J001 - page 6

    6 Contents book.book Page 6 Monday, December 7, 2009 4:51 PM ...

  • Dell E04J001 - page 7

    About Y our Enclosure 7 About Y our Enclosure Front-Panel Features and Indicators Figure 1-1. Front-Panel Features an d Indicators—Dell™ PowerV ault™ MD1200 Figure 1-2. Front-Panel Features and Indicators—De ll PowerV ault MD1220 1 2 3 5 4 6 1 2 3 4 6 5 book.book Page 7 Monday, December 7, 2009 4:51 PM ...

  • Dell E04J001 - page 8

    8 About Y our Enclosure Item Indicator , Button, or Connector Icon Description 1 Enclosure status LED The enclosure status LED lights when the enclosure power is on. Lights blue during normal operation and when the host server is identifying the enclosure. Blinks blue when a host server is identifying the enclosure or when the system identification ...

  • Dell E04J001 - page 9

    About Y our Enclosure 9 Front-Bezel Features and Indicators Figure 1-3. Front-Bezel Features and Indicators 5 Hard drives P owerV ault MD1200—Up to 12 3.5-inch SAS hot-swappable hard drives. P owerV ault MD1220—Up to 24 2.5-inch SAS hot-swappable hard drives. 6 Enclosure mode switch When set in the top position, the enclosure is configur ed in ...

  • Dell E04J001 - page 10

    10 About Y our Enclosure Item Indicator , Button, or Connector Icon Description 1 Enclosure status LED The enclosure status LED lights when the enclosure power is on. Lights blue during normal operation and when the host server is identifying the enclosure. Blinks blue when a host server is identifying the enclosure or when the system identificatio ...

  • Dell E04J001 - page 11

    About Y our Enclosure 11 Hard-Drive Indicator Patterns Figure 1-4. Hard Drive Indicators 1 hard-drive activity indicator (green) 2 hard-drive status indicator (green and amber) Drive-Status Indicator Pattern (RAID Only) Condition Blinks green two times per second Id entify drive/preparing for r emoval Off Drive ready for insertion or r emoval NOTE: ...

  • Dell E04J001 - page 12

    12 About Y our Enclosure Back-Panel Features and Indicators Figure 1-5. Back-Panel Features and Indicators Blinks green, amber , and off Drive predicted failur e Blinks amber four times per second Drive failed Blinks green slowly Drive rebuilding Steady green Drive online Blinks green thr ee seconds, amber three seconds, and off six seconds. Rebuil ...

  • Dell E04J001 - page 13

    About Y our Enclosure 13 Enclosure Management Module Each EMM provides the following data path and enclosure management functions for your enclosure: • Monitoring and controlling enclos ure environment elements such as temperature, fan, power supplies, and enclosur e LEDs. • Controlling access to hard drives. • Communicating enclosure attribu ...

  • Dell E04J001 - page 14

    14 About Y our Enclosure Figure 1-6. Enclosure Management Module Item Indicator , Button, or Connector Icon Description 1 System status indicator Blinks blue when the system identification button is pushed. Y ou can identify a particular enclosure in a rack using the system iden tification indicator . 2 Debug port F or engineering use only . 3 SAS ...

  • Dell E04J001 - page 15

    About Y our Enclosure 15 6 Out port link status Lights green when all the links out of the port are connected. Lights amber when one or more links out of the port are not co nnected. The LED remains off if enclosur e is not connected. 7 EMM status LED Lights green when the EMM is functioning properly . Lights amber when the enclosure does not boot ...

  • Dell E04J001 - page 16

    16 About Y our Enclosure Enclosure Failover When T wo EMMs are Installed If two EMMs are installed, a certain degr ee of failover is offered. Control and monitoring of the enclosure elements ca n be transferr ed from one EMM to another in the event of an EMM failure. A failover occurs whenever communication is lost between an EMM and its peer . In ...

  • Dell E04J001 - page 17

    About Y our Enclosure 17 The alarm sounds every 10 seconds if: • One power supply has failed. • One cooling fan has failed. • One or more temperatur e sensors ar e in warning range. • One EMM has failed. NOTE: The alarm is disabled by default. T o e nable the alarm, yo u must change the default setting in Server Administrato r . For more in ...

  • Dell E04J001 - page 18

    18 About Y our Enclosure Other Information Y ou May Need WARNING: See the safety and regulatory information that shipped with your sy stem. Warranty inform ation may be included within this document or as a separate document. • The rack documentation included with your rack solution describes how to install your system into a rack. •T h e Getti ...

  • Dell E04J001 - page 19

    Operating Y our Storage Enclosure 19 Operating Y our Storage Enclosure Before Y ou Begin Before connecting your storage enclosur e, ensur e that the following ar e available: • P ower cables • SAS cables • Rail kit • Dell Systems Management T ools and Documentation media • Documentation – Getting Started Guide – Rack Installation Inst ...

  • Dell E04J001 - page 20

    20 Operating Y our Storage Enclosure drives that are controlled by e ach enclosur e management module (EMM) in a split-mode configuration. See F igur e 2-4 for a cabling diagram of a split-mode configuration. NOTE: Clustering is not supported on PowerV ault MD1200 and PowerV ault M1220 enclosures. The operating mode is selected using the enclosure ...

  • Dell E04J001 - page 21

    Operating Y our Storage Enclosure 21 Figure 2-1. Connecting a SAS Cable NOTE: In a unified-mode configuration, con nect the host to the first EMM module (EMM 0). See Figure 2-2. For unified-mode configurations utilizing redundant paths, conne ct the host to the second EMM module (EMM1). See Figure 2-3. See your R AID controller documentatio n to en ...

  • Dell E04J001 - page 22

    22 Operating Y our Storage Enclosure Figure 2-2. EMM Cabling Di agram in Unified Mode host controller book.book Page 22 Monday, December 7, 2009 4:51 PM ...

  • Dell E04J001 - page 23

    Operating Y our Storage Enclosure 23 Figure 2-3. EMM Cabling Diagram in Unified Mode (Redundant Path) host controller book.book Page 23 Monday, December 7, 2009 4:51 PM ...

  • Dell E04J001 - page 24

    24 Operating Y our Storage Enclosure Figure 2-4. EMM Cabling Diagram in Split Mode 4 Using the enclosure mode switch, select the operating mode. CAUTION: T o safeguard your storage enc losure against power problems, connect the AC power cable to a prote cted power supply , such as a UPS, line conditioner , or surge protector . If possi ble, connect ...

  • Dell E04J001 - page 25

    Operating Y our Storage Enclosure 25 Changing Y our Enclosure’ s Operating Mode If you decide to change the operating mode of your enclosure after initial configuration, you must: 1 Back up all data contained in the enclosure and stor e the data in a secure location. 2 When changing the operating mode from: • Unified mode to split mode—If e x ...

  • Dell E04J001 - page 26

    26 Operating Y our Storage Enclosure Managing Y our Storage Enclosure Disk storage within the enclosure can be configur ed using either the BIOS configuration utility or Server Administrator . F or optimal management and serviceability of your enclosure, it is r ecommended that you use Server Administrator . NOTE: Online configuration, enclosure st ...

  • Dell E04J001 - page 27

    Installing Enclosure Components 27 Installing Enclosure Components Recommended T ools Y ou may need the following items to p erform the procedures in this section: • Key to the system k eylock • #2 Phillips screwdriver •W rist grounding stra p Front Bezel (Optional) Removing the Front Bezel 1 Using the system key , unlock the front bezel (if ...

  • Dell E04J001 - page 28

    28 Installing Enclosure Components Figure 3-1. Removing and Installing the Front Bezel Installing the Front Bezel 1 Hook the right end of the bezel onto the chassis. 2 F i t the free end of the bezel onto the system. 3 Secure the bezel with the k eylock. See F igure 3-1. 1 bezel 2 keylock 3 release latch 4 hinge tab 1 2 3 4 book.book Page 28 Monday ...

  • Dell E04J001 - page 29

    Installing Enclosure Components 29 Hard Drives SAFETY : Models AMT , E03J, and E04J Models AMT , E03J, and E04J are intend ed for installation only in restricted access locations as defined in cl 1.2.7.3 of IEC 60950-1:2005. Depending on your configuration, your enclosure either supports up to 24 2.5-inch SAS hard drives or up to 12 3.5- inch SAS h ...

  • Dell E04J001 - page 30

    30 Installing Enclosure Components Figure 3-2. Removing and Installing a 3.5-Inch Hard-Drive Blank Figure 3-3. Removing and Installing a 2.5-Inch Hard-Drive Blank 1 drive blank 2 release tab 1 drive blank 2 release tab 1 2 1 2 book.book Page 30 Monday, December 7, 2009 4:51 PM ...

  • Dell E04J001 - page 31

    Installing Enclosure Components 31 Installing a Drive Blank 1 If installed, remove the front bezel . See "Removing the F ront Bezel" on page 27. 2 Insert the drive blank into the drive bay until the blank is fully seated. 3 Close the handle to lock the blank in place. 4 If applicable, replace the front bezel. See "Installing the F ro ...

  • Dell E04J001 - page 32

    32 Installing Enclosure Components Figure 3-4. Removing and Installing a Hard Drive Installing a Hard Drive CAUTION: Many repairs may only be do ne by a certified se rvice technician. Y ou should only perform tr oubleshooting and simple repairs as authorized in your product documentation, or as directed by the o nline or teleph one service and supp ...

  • Dell E04J001 - page 33

    Installing Enclosure Components 33 4 Insert the hard-drive carrier into the drive bay until the carrier contacts the backplane. 5 Close the handle to lock the drive in place. Removing a Hard Drive From a Hard-Drive Carrier Remove the screws from the slide rails on the har d-drive carrier and separate the hard drive from the carrier . See F igur e 3 ...

  • Dell E04J001 - page 34

    34 Installing Enclosure Components Figure 3-6. Removing and Installing a Ha rd Drive Into a 2.5-Inch Drive Carrier 1 screws (4) 2 drive carrier 3 SAS screw hole 4 hard drive 1 screws (4) 2 drive carrier 3 SAS screw hole 4 hard drive 2 1 3 4 book.book Page 34 Monday, December 7, 2009 4:51 PM ...

  • Dell E04J001 - page 35

    Installing Enclosure Components 35 Installing a Hard Drive Into a Drive Carrier 1 Insert the hard drive into the har d -drive carrier with the connector end of the drive at the back. See F igur e 3-5. 2 Align the screw holes on the har d driv e with the back set of holes on the hard-drive carrier . When aligned correctly , the back of the hard driv ...

  • Dell E04J001 - page 36

    36 Installing Enclosure Components 6 Connect all the power cables to the enclosure. 7 T urn on the enclosure and the host server . Figure 3-7. Removing and Installing an EMM Blank Installing an EMM Blank T o install an EMM blank, align the blank with the EMM bay and insert the blank into the chassis until it clicks into place. 1 release latch 2 EMM ...

  • Dell E04J001 - page 37

    Installing Enclosure Components 37 Removing an EMM CAUTION: Many repairs may only be done by a certifi ed service technician. Y ou should only perform tr oubleshooting and simple repa irs as authorized in your product documentation, or as directed by the onli ne or telephone service and support team. Damage due to servicing that is not authoriz ed ...

  • Dell E04J001 - page 38

    38 Installing Enclosure Components Figure 3-8. Removing and Installing an EMM 1 EMM 2 release tab 3 release lever 2 3 1 book.book Page 38 Monday, December 7, 2009 4:51 PM ...

  • Dell E04J001 - page 39

    Installing Enclosure Components 39 Installing an EMM CAUTION: Many repairs may only be done by a certified service technician. Y ou should only perform trou bleshooting and simple rep airs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authoriz ed ...

  • Dell E04J001 - page 40

    40 Installing Enclosure Components 3 Remove the V elcro straps that secure the power cable and then disconnect the power cable from the power supply/cooling fan module. WARNING: The power supply/cooling fan modules are heav y . Use both hands while removing the module. 4 P r ess the release tab and pull the power supply out of the chassis. Figure 3 ...

  • Dell E04J001 - page 41

    Installing Enclosure Components 41 Installing a Power Supply/Cooling Fan Module 1 Slide the power supply/cooling fan module into the chassis until it is fully seated and the release tab clicks into place. See F igure 3-9. 2 Connect the power cable to the powe r supply/cooling fan module and plug the cable into a power outlet. 3 Secure the power cab ...

  • Dell E04J001 - page 42

    42 Installing Enclosure Components Control Panel Removing the Control Panel 1 T urn off the enclosure and host server . 2 Disconnect all the power cables connected to the enclosure. 3 Remove the hard drives from: – slots 0 to 2 in P owerV ault MD1200 – slots 0 to 5 in P owerV ault MD1220 See "Removing a Hard Drive" on page 31. NOTE: M ...

  • Dell E04J001 - page 43

    Installing Enclosure Components 43 Figure 3-11. Removing and Installing the Control Panel—PowerV ault MD1200 Figure 3-12. Removing and Installing the Control Panel—PowerV ault MD1220 1 control panel 2 release tab 1 control panel 2 release pin 2 1 2 1 book.book Page 43 Monday, December 7, 2009 4:51 PM ...

  • Dell E04J001 - page 44

    44 Installing Enclosure Components Installing the Control Panel 1 Align the control panel with the slot on the enclosure. 2 Slide the control panel into the enclosure until: – The r elease tab clicks into place in P owerV ault MD1200 . See F igur e 3-11. – The r elease pin clicks into place in P owerV ault MD1220 . See F igur e 3-12. 3 Replace ...

  • Dell E04J001 - page 45

    Installing Enclosure Components 45 8 Grasp the cage removal ring at the bottom center of the enclosur e and pull the EMM/power supply cage toward the back of the chassis. See F igur e 3-13. 9 Lift the EMM/power supply cage away from the chassis. See F igur e 3-13. 10 Loosen the captive screw that secure s the backplane to the chassis. See F igur e ...

  • Dell E04J001 - page 46

    46 Installing Enclosure Components Figure 3-14. Removing and Installing the Backplane—PowerV ault MD1200 Figure 3-15. Removing and Installing the Backplane—PowerV ault MD1220 1 screws (5) 2 backplane 3 captive screw 1 screws (4) 2 backplane 3 captive screw 2 1 3 2 1 3 book.book Page 46 Monday, December 7, 2009 4:51 PM ...

  • Dell E04J001 - page 47

    Installing Enclosure Components 47 Installing the Backplane 1 Align the holes on the backplane with the holes on the enclosure. 2 Tighten the captive scr ew to secur e the backplane to the chassis. See F igur e 3-14 for P owerV ault MD1200 or F igur e 3-15 for P owerV ault MD1220. 3 Replace the screws that secur e the backplane to the chassis. See ...

  • Dell E04J001 - page 48

    48 Installing Enclosure Components book.book Page 48 Monday, December 7, 2009 4:51 PM ...

  • Dell E04J001 - page 49

    T roubleshooting Y our Enclosure 49 T roubleshooting Y our Enclosure Safety First—For Y ou and Y our Enclosure CAUTION: Many repairs may only be done by a certifi ed service technician. Y ou should only perform tr oubleshooting and simple repa irs as authorized in your product documentation, or as directed by the onli ne or telephone service and ...

  • Dell E04J001 - page 50

    50 T roubleshooting Y our Enclosure T roubleshooting Power Supply/Cooling Fan Module CAUTION: Many repairs may only be do ne by a certified se rvice technician. Y ou should only perform tr oubleshooting and simple repairs as authorized in your product documentation, or as directed by the o nline or teleph one service and support team. Damage due to ...

  • Dell E04J001 - page 51

    T roubleshooting Y our Enclosure 51 2 Reseat the power supply by remov ing and r einstalling it. See "P ower Supply/Cooling F an Module" on page 39. NOTE: After installing a power supply , allow several seconds for the enclosure to recognize the power supply and to determine if it is working properly . If the problem is not resolved, see ...

  • Dell E04J001 - page 52

    52 T roubleshooting Y our Enclosure T roubleshooting Enclosure Management Modules CAUTION: Many repairs may only be done by a certified service technician. Y ou should only perform troubleshooting and simple repairs as authorized in your product documentation, or as dire cted by the online or telephone service and support team. Damage due to servic ...

  • Dell E04J001 - page 53

    T roubleshooting Y our Enclosure 53 T roubleshooting Hard Drives CAUTION: Many repairs may only be done by a certifi ed service technician. Y ou should only perform tr oubleshooting and simple repa irs as authorized in your product documentation, or as directed by the onli ne or telephone service and support team. Damage due to servicing that is no ...

  • Dell E04J001 - page 54

    54 T roubleshooting Y our Enclosure T roubleshooting Enclosure Connections 1 V erify that the EMM port link statu s LED and the EMM status LED are solid green for each port that is co nnected to a cable. If the LEDs ar e not solid green, see "Enclosur e Management Module" on page 13. 2 Ensure that all the cables ar e att ached corr ectly ...

  • Dell E04J001 - page 55

    T roubleshooting Y our Enclosure 55 T roubleshooting a Damaged Enclosure CAUTION: Many repairs may only be done by a certifi ed service technician. Y ou should only perform tr oubleshooting and simple repa irs as authorized in your product documentation, or as directed by the onli ne or telephone service and support team. Damage due to servicing th ...

  • Dell E04J001 - page 56

    56 T roubleshooting Y our Enclosure book.book Page 56 Monday, December 7, 2009 4:51 PM ...

  • Dell E04J001 - page 57

    Getting Help 57 Getting Help Contacting Dell F or customers in the United States , call 800- WWW -DELL (800-999-3355). NOTE: If you do not have an active Inter net connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telepho ne-based support and service ...

  • Dell E04J001 - page 58

    58 Getting Help book.book Page 58 Monday, December 7, 2009 4:51 PM ...

  • Dell E04J001 - page 59

    Glossary 59 Glossary A — Ampere(s). AC — Alternating current. ACP I — Advanced Configuration and P ower I nterface. A standard interface for enabling the operating system to dire ct configuration and power management. ambient temperature — The temperature of the ar ea or room wher e the system is located. ANSI — American National Standard ...

  • Dell E04J001 - page 60

    60 Glossary CPU — Central processing uni t. See processor . DC — Direct curr ent. DDR — Double-data rate. A technology in memo ry modules that potentially doubles the data rate by transferring data on both the rising and falling pulses of a clock cycle. device driver — A program that allows the operating system or some other program to inte ...

  • Dell E04J001 - page 61

    Glossary 61 storage devices. flash memory — A type of electronic chip that can be programmed and reprogrammed using a softwar e utility . FSB — F ront-side bus. The FSB is the data path and physical interface between the processor and the main memory (R AM). FTP — F ile transfer protocol. g — Gram(s). G — Gravities. Gb — Gigabit(s); 102 ...

  • Dell E04J001 - page 62

    62 Glossary Plastic plugs containing a wire fit down over the pins. The wir e connects the pins and creates a circuit, providing a simple and r e versible method of changing the circuitry in a board. K — Kilo-; 1000. Kb — Kilobit(s); 1024 bits. KB — Kilobyte(s); 1024 bytes. Kbps — Kilobit(s) per second. KBps — Kilobyte(s) per second. kg ? ...

  • Dell E04J001 - page 63

    Glossary 63 MBps — Megabytes per second. MBR — Master boot recor d. memory address — A specific location, usually expressed as a he xadecimal number , in the system’s R AM. memory module — A small circuit board containing DR AM chips that connects to the system board. memory — An area in your system that stor es basic system data. A sys ...

  • Dell E04J001 - page 64

    64 Glossary PDU — P ower distribution unit. A power so urce with multiple power outlets that provides electrical power to serve rs and storage systems in a rack. peripheral — An internal or extern al device, such as a disk ette drive or k eyboard, connected to a system. pixel — A single point on a video display . Pix e ls are arranged in rows ...

  • Dell E04J001 - page 65

    Glossary 65 system board and storage devices. SCSI — Small computer system interface. An I/O bus interface with faster data transmission rates than standard ports. SD card — Secure digital flash memory car d. SDRAM — Synchronous dynamic random-access memory . sec — Second(s). serial port — A legacy I/O port with a 9-pin connect or that tr ...

  • Dell E04J001 - page 66

    66 Glossary must be terminated to prevent r eflections and spurious signals in the cable. When such devices are connected in a series, yo u may need to enable or disable the termination on these devices by changing ju mper or switch settings on the devices or by changing settings in the config uration software for the devices. TOE — TCP/IP offloa ...

  • Dell E04J001 - page 67

    Glossary 67 WH — W att-hour(s). XML — Extensible Markup Language. XML is a way to create common information formats and to share both the format and the data on the W orld W ide W eb, intranets, and elsewhere. ZIF — Zero insertion force. book.book Page 67 Monday, December 7, 2009 4:51 PM ...

  • Dell E04J001 - page 68

    68 Glossary book.book Page 68 Monday, December 7, 2009 4:51 PM ...

  • Dell E04J001 - page 69

    Index 69 Index A alarms, 16 B backplane installing, 4 7 removing, 4 4 C cabling split mode, 2 0 unified mode, 2 0 contacting Dell, 57 control panel installing, 4 4 removing, 4 2 D Dell contacting, 5 7 drive carrier hard drive, 3 3 E enclosure managing, 2 6 enclosure mode cabling, 1 9 changing, 2 5 split, 1 9 unified, 1 9 F firmware downloading, 2 6 ...

  • Dell E04J001 - page 70

    Index 70 power , 7 installing backplane, 4 7 control panel MD1200, 4 4 drive blank, 3 1 EMM, 3 9 EMM blank, 3 6 front bezel, 2 8 hard drive, 3 2 hard drives, 3 2 power supply/cooling fan module, 4 1 M managing storage enclosure, 2 6 P phone numbers, 57 power indicators, 7 R recommended tools, 27 removing backplane, 4 4 control panel MD1200, 4 2 dri ...

Manufacturer Dell Category Computer Drive

Documents that we receive from a manufacturer of a Dell E04J001 can be divided into several groups. They are, among others:
- Dell technical drawings
- E04J001 manuals
- Dell product data sheets
- information booklets
- or energy labels Dell E04J001
All of them are important, but the most important information from the point of view of use of the device are in the user manual Dell E04J001.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Dell E04J001, service manual, brief instructions and user manuals Dell E04J001. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Dell E04J001.

Similar manuals

A complete manual for the device Dell E04J001, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Dell E04J001 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Dell E04J001.

A complete Dell manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Dell E04J001 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Dell E04J001, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Dell E04J001, that we can find in the current document
3. Tips how to use the basic functions of the device Dell E04J001 - which should help us in our first steps of using Dell E04J001
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Dell E04J001
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Dell E04J001 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Dell E04J001?

Use the form below

If you did not solve your problem by using a manual Dell E04J001, ask a question using the form below. If a user had a similar problem with Dell E04J001 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)