English dropdown-ico

Manual D-Link DAP-1350

138 pages 9.34 mb
Download

Go to site of 138

Summary
  • D-Link DAP-1350 - page 1

    ...

  • D-Link DAP-1350 - page 2

    2 D-Link DAP-1350 User Manual D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions T rademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries. ...

  • D-Link DAP-1350 - page 3

    3 D-Link DAP-1350 User Manual T able of Contents Manual Revisions .................................................... 2 Trademarks ............................................................. 2 Product Overview ........................................................ 6 Package Contents ................................................... 6 System ...

  • D-Link DAP-1350 - page 4

    4 D-Link DAP-1350 User Manual T able of Contents Logs ............................................................. 60 Statistics ....................................................... 61 Help .............................................................. 62 Router Mode .................................................... 63 Setup Wizard ......... ...

  • D-Link DAP-1350 - page 5

    5 D-Link DAP-1350 User Manual T able of Contents Connect to a Wireless Network .............................. 122 Using Windows ® XP ............................................. 122 Congure WEP .................................................... 123 Congure WPA-PSK ........................................... 125 Troubleshooting ........... ...

  • D-Link DAP-1350 - page 6

    6 D-Link DAP-1350 User Manual Section 1 - Product Overview Product Over view Note: Using a power supply with a different voltage rating than the one included with the DAP-1350 will cause damage and void the warranty for this product. D-Link DAP-1350 Wireless N Pocket Router /Access Point Power Adapter Ethernet Cable CD-ROM USB Power Cable Travel Ca ...

  • D-Link DAP-1350 - page 7

    7 D-Link DAP-1350 User Manual Section 1 - Product Overview Network Requirements • An Ethernet-based Cable or DSL modem (router mode only) • IEEE 802.11n or 802.11g wireless clients (router or AP mode) • IEEE 802.11n or 802.11g wireless AP or router (client mode) • 10/100/1000 Ethernet Web-based Conguration Utility Requirements Computer w ...

  • D-Link DAP-1350 - page 8

    8 D-Link DAP-1350 User Manual Section 1 - Product Overview Introduction D-Link, an industry leader in networking, introduces the new D-Link DAP-1350 Wireless N Range Extender. With the ability to transfer les with a maximum wireless signal rate of up to 300Mbps*, the DAP-1350 gives you high-speed wireless network access for your home or when you ...

  • D-Link DAP-1350 - page 9

    9 D-Link DAP-1350 User Manual Section 1 - Product Overview TOTAL PERFORMANCE Co mb in es a wa rd w in ni ng acc es s po in t fe at ur es and 8 02 .1 1n w ir el es s te ch no lo gy t o pr ov id e th e be st w ir el es s perf or ma nc e. TOTAL SECURITY The most complete set of security features including WPA/WPA2 encryption to protect your network ag ...

  • D-Link DAP-1350 - page 10

    10 D-Link DAP-1350 User Manual Section 1 - Product Overview • Faster Wireless Networking - The DAP-1350 provides up to 300Mbps* wireless connection with other 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, onl ine gamin g, and real- tim e audi o. The perf orm anc e of ...

  • D-Link DAP-1350 - page 11

    11 D-Link DAP-1350 User Manual Section 1 - Product Overview Hardware Over view Connections Mode Selector Select from one of the three modes: AP (top) - Access Point (AP) Mode CL (middle) - Wireless Client Mode RT (bottom) - Router Mode Power Receptor Receptor for the supplied power adapter. LAN/WAN Port When using as a LAN port, connect Ethernet de ...

  • D-Link DAP-1350 - page 12

    12 D-Link DAP-1350 User Manual Section 1 - Product Overview Hardware Over view Side USB Port The USB port is used to connect USB devices such as a printer to share on your network. Bottom WPS Button/LED Press to start the WPS process. You will have 120 seconds to start the WPS process on another wireless device. When enabling WPS, the light will bl ...

  • D-Link DAP-1350 - page 13

    13 D-Link DAP-1350 User Manual Section 1 - Product Overview Hardware Over view LEDs Power LED A solid light indicates a proper connection to the power supply. Wireless LED A solid light indicates that the wireless segment is ready. This LED blinks during wireless data transmission. LAN/WAN LED A solid light indicates a connection to an Ethernet-ena ...

  • D-Link DAP-1350 - page 14

    14 D-Link DAP-1350 User Manual Section 2 - Installation Installation Please congure the DAP-1350 by following the Install Guide poster. The next few pages will explain the different operational modes you can use. Operation Modes Depending on how you want to use your DAP-1350 will determine which mode you use. This section will help you gure o ...

  • D-Link DAP-1350 - page 15

    15 D-Link DAP-1350 User Manual Section 2 - Installation Access Point Mode In the Access Point mode, the DAP-1350 acts as a central connection point for any computer (client) that has a 802.11n or backward-compatible 802.11b/g wireless network interface and is within range of the AP. Clients must use the same SSID (wireless network name) and channel ...

  • D-Link DAP-1350 - page 16

    16 D-Link DAP-1350 User Manual Section 2 - Installation Wireless Client Mode In the Wireless Client mode, the DAP-1350 acts as a wireless network adapter for your Ethernet-enabled device (such as a game console or a laptop). Connect your Ethernet-enabled device to the AP using an Ethernet cable. The AP Client mode can support one wired client. Exam ...

  • D-Link DAP-1350 - page 17

    17 D-Link DAP-1350 User Manual Section 2 - Installation Router Mode In the Router mode, the DAP-1350 connects to a broadband modem. In this mode, the DAP-1350 also acts as a router for wireless clients on your network and provides NAT (Network Address Translation) and a DHCP server to generate IP addresses. NAT and the DHCP server allow many comput ...

  • D-Link DAP-1350 - page 18

    18 D-Link DAP-1350 User Manual Section 2 - Installation Wireless Installation Considerations The D-Link wireless access point lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or othe ...

  • D-Link DAP-1350 - page 19

    19 D-Link DAP-1350 User Manual Section 3 - Configuration Configuration This section will show you how to congure your new D-Link wireless access point using the web-based conguration utility. Access Point Mode If you wish to change the default settings or optimize the performance of the DAP-1350, you may use the web-based conguration uti ...

  • D-Link DAP-1350 - page 20

    20 D-Link DAP-1350 User Manual Section 3 - Configuration Cl ic k Lau nc h Wi re le ss Setu p Wi za rd to con g ur e yo ur a cc ess po int an d sk ip to th e ne xt pag e. To set up your wireless network, click Add Wireless Device With WPS and skip to page 24. If you want to enter your settings without running the wizard, click Wireless Setup on ...

  • D-Link DAP-1350 - page 21

    21 D-Link DAP-1350 User Manual Section 3 - Configuration Enter the Device Name of the AP and click Next to continue. This is the NetBIOS name for the AP. It is recommended to change the Device Name if there is mo re tha n on e D- Lin k de vi ce wit hin the sam e wireless network. This Wizard is designed to assist you in conguring your DAP-1350 ...

  • D-Link DAP-1350 - page 22

    22 D-Link DAP-1350 User Manual Section 3 - Configuration Click Save to save your network settings. In order for your network settings to take effect the AP will reboot automatically. When the device has nished rebooting the main screen will display. Select Auto as the conguration method only if your wireless device supports Wi-Fi Protected S ...

  • D-Link DAP-1350 - page 23

    23 D-Link DAP-1350 User Manual Section 3 - Configuration Select Manual as the conguration method to set up your network manually. Click Next to continue. Enter a name for your wireless network (SSID). Select Automa tica lly assign a networ k key to have the access point generate a key for you to enter on your wireless clients. If you want to en ...

  • D-Link DAP-1350 - page 24

    24 D-Link DAP-1350 User Manual Section 3 - Configuration The following screen will show you your network key to enter on your wireless clients. Click Save to nish the Setup Wizard. ...

  • D-Link DAP-1350 - page 25

    25 D-Link DAP-1350 User Manual Section 3 - Configuration This Wizard is designed to assist you in your wireless network setup. It will guide you through step-by-step instructions on how to set up your wireless network and how to make it secure. S e l e c t PIN t o u s e y o u r PIN number from your wireless device to connect to your network. For P ...

  • D-Link DAP-1350 - page 26

    26 D-Link DAP-1350 User Manual Section 3 - Configuration Press the Push Button on the wireless device that you are adding to your network to complete the setup. Select PBC to use the Push Button Conguration in order to connect to your network. Click Connect to continue. ...

  • D-Link DAP-1350 - page 27

    27 D-Link DAP-1350 User Manual Section 3 - Configuration Enable Wireless: Wireless Mode: Wireless Network Name: Enable Auto Channel Scan: Wireless Channel: 802.11 Mode: Check the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions. You may also set up a specic time range ...

  • D-Link DAP-1350 - page 28

    28 D-Link DAP-1350 User Manual Section 3 - Configuration Select the Channel Width: Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices. 20MHz - Select if you are not using any 802.11n wireless clients. Select the transmit rate. It is strongly suggested to select Best (automatic) for best performance. Check the box if ...

  • D-Link DAP-1350 - page 29

    29 D-Link DAP-1350 User Manual Section 3 - Configuration LAN Setup This section will allow you to change the local network settings of the access point and to congure the DHCP settings. LAN Connection T ype: Device Name: Us e the drop -d ow n men u to sele ct Dyna mi c IP (DHCP) to automatically obtain an IP address on the LAN/private network. ...

  • D-Link DAP-1350 - page 30

    30 D-Link DAP-1350 User Manual Section 3 - Configuration LAN Connection T ype: IP Address: Subnet Mask: Default Gateway: Device Name: Select Static IP from the drop-down menu. Enter the IP address of the access point. The default IP address is 192.168.0.50. If you change the IP address, once you click Apply , you will need to enter the new IP addr ...

  • D-Link DAP-1350 - page 31

    31 D-Link DAP-1350 User Manual Section 3 - Configuration MAC Address Filter Select Enable or Disable from the drop-down menu. Enter the MAC add ress you woul d li ke t o l ter. To nd the MAC add res s on a comput er, ple ase refer to the Networking Basics section in this manual. Click Save Settings to activate and save. Note: Make sure you e ...

  • D-Link DAP-1350 - page 32

    32 D-Link DAP-1350 User Manual Section 3 - Configuration Advanced Wireless T ransmit Power: Beacon Period: DTIM Interval: RTS Threshold: Fragmentation Threshold: WMM Enable: Short GI: Sets the transmit power of the antennas. N o t e : Tr a n s m i t po w e r is re g u l a t e d by in t e r n a t i o n a l standard. Users are forbidden to change it ...

  • D-Link DAP-1350 - page 33

    33 D-Link DAP-1350 User Manual Section 3 - Configuration User Limit Check the Enable User Limit box to enable this feature. Enter the maximum number of clients, between 1 and 32. Click Save Settings to save and activate the new changes. Enable User Limit: User Limit: Save Settings: Enter the maximum number of wireless clients that can connect at o ...

  • D-Link DAP-1350 - page 34

    34 D-Link DAP-1350 User Manual Section 3 - Configuration Password: Verify Password: Enable Graphical Authentication: Enter a new password for the Administrator Login Name. The administrator can make changes to the settings. Enter the same password that you entered in the previous textbox in order to conrm its accuracy. Enables a challenge-respo ...

  • D-Link DAP-1350 - page 35

    35 D-Link DAP-1350 User Manual Section 3 - Configuration Save to Local Hard Drive: Upload from Local Hard Drive: Restore to Factory Default: Reboot the Device: Use this option to save the current access point conguration settings to a le on the hard disk of the computer you are using. Click the Save button. You will then see a le dialog w ...

  • D-Link DAP-1350 - page 36

    36 D-Link DAP-1350 User Manual Section 3 - Configuration Browse: Upload: After you have downloaded the new rmware, click Br o ws e to l oc a te t h e rm w ar e u pd a te o n y ou r hard drive. Click Upload to complete the rmware upgrade. On ce y ou hav e a  rm war e up da te o n yo u r c o mp ute r, use this opti on to br ow se for the ...

  • D-Link DAP-1350 - page 37

    37 D-Link DAP-1350 User Manual Section 3 - Configuration Time Zone: Daylight Saving: Enable NTP Server: NTP Server Used: Date and Time: Select the Time Zone from the drop-down menu. To select Daylight Saving time manually, click the Enable Daylight Saving check box. Next use the drop-down menu to select a Daylight Saving Offset and then enter a st ...

  • D-Link DAP-1350 - page 38

    38 D-Link DAP-1350 User Manual Section 3 - Configuration Enter a name for your new schedule. Select a day, a range of days, or All Week to include every day. Check All Days or enter a start and end time for your schedule. Select On or Off from the drop-down menu. Click Add to save your schedule. You must click Save Settings at the top for your sch ...

  • D-Link DAP-1350 - page 39

    39 D-Link DAP-1350 User Manual Section 3 - Configuration General: LAN: Wireless LAN: Displays the access point’s time and rmware version. Displays the MAC address and the private (local) IP settings for the access point. Displays the wireless MAC address and your wireless settings such as SSID and Channel. Device Info This page displays the c ...

  • D-Link DAP-1350 - page 40

    40 D-Link DAP-1350 User Manual Section 3 - Configuration Logs The DAP-1350 keeps a running log of events and activities occurring on the AP. If the AP is rebooted, the logs are automatically cleared. You can save the log les under Log Settings. Log Options: First Page: Last Page: Previous: Next: Clear: Log Settings: Refresh: You can select the ...

  • D-Link DAP-1350 - page 41

    41 D-Link DAP-1350 User Manual Section 3 - Configuration Statistics T h e D A P - 13 5 0 k ee ps s t a ti s ti c s o f th e tr af c t h a t p as se s t h ro u gh i t . Y o u c a n v i e w th e am o un t of p ac k et s th at p a ss t h r o ug h t h e LA N a n d w ir e le s s p or t io n s o f t he ne t wo r k. Th e t r af  c c ou n te r w i l ...

  • D-Link DAP-1350 - page 42

    42 D-Link DAP-1350 User Manual Section 3 - Configuration Wireless The wireless section allows you to view the wireless clients that are connected to your wireless access point. Connection Time: MAC Address: Displays the amount of time the wireless client has been connected to the access point. The Ethernet ID (MAC address) of the wireless client. ...

  • D-Link DAP-1350 - page 43

    43 D-Link DAP-1350 User Manual Section 3 - Configuration Help ...

  • D-Link DAP-1350 - page 44

    44 D-Link DAP-1350 User Manual Section 3 - Configuration Wireless Client Mode If you wish to change the default settings or optimize the performance of the DAP-1350, you may use the web-based conguration utility. To access the conguration utility, open a web browser such as Internet Explorer and enter dlinkap o r 192.168.0.50 in the address ...

  • D-Link DAP-1350 - page 45

    45 D-Link DAP-1350 User Manual Section 3 - Configuration This Wizard is designed to assist you in conguring your DAP-1350 as a wireless client. If you want to change the admin account password, enter a new password and click Next . It is strongly recommended to change your password. Wireless Setup Wizard Enter the Device Name of the AP and clic ...

  • D-Link DAP-1350 - page 46

    46 D-Link DAP-1350 User Manual Section 3 - Configuration For PBC (Push Button Conguration), skip to the next page. Se l ec t PIN to c o nn e ct yo u r w ir e le s s d e vi c e w it h WPS. You may click Generate New PIN to us e a different PIN number. Click Connect to start the WPS scan. Wi th in 2 min utes , en te r the PI N numb er int o th e ...

  • D-Link DAP-1350 - page 47

    47 D-Link DAP-1350 User Manual Section 3 - Configuration Select PBC to use the Push Button Conguration to connect to your network. Click Connect to continue. Note: You may also press the WPS button located on the side of the DAP-1350 instead of running this wizard. On the device you want to connect to, start the PBC process on the device. You w ...

  • D-Link DAP-1350 - page 48

    48 D-Link DAP-1350 User Manual Section 3 - Configuration Select Manual conguration to setup your network manually. Click Next to continue. Enter the network name (SSID) of the network you wa n t t o c on nec t t o. If yo u do n o t k no w the ex act na me or would like to search for the wireless network, click Site Survey . Find your access poi ...

  • D-Link DAP-1350 - page 49

    49 D-Link DAP-1350 User Manual Section 3 - Configuration Choose which Security Mode you want to use and click Next to continue. If you select WEP , choose the key type (ASCII or HEX), the key size (64 or 128-bit), and enter the wireless security password. Click Next to complete the Setup Wizard. If you select WPA or WPA2 , enter the wireless secur ...

  • D-Link DAP-1350 - page 50

    50 D-Link DAP-1350 User Manual Section 3 - Configuration The Wir el ess Set up Wiza rd is com pl ete . Cl ic k Fi nis h to reboot the device. ...

  • D-Link DAP-1350 - page 51

    51 D-Link DAP-1350 User Manual Section 3 - Configuration Manual Wireless Setup Wireless Mode: Site Survey: Wireless T ype: Wireless Network Name: Wireless Channel: 802.11 Mode: Channel Width: T ransmission Rate: Wireless MAC Clone: Wireless Security Mode: WPS: Wireless Client Mode is selected. Click Site Survey to display a list of wireless networ ...

  • D-Link DAP-1350 - page 52

    52 D-Link DAP-1350 User Manual Section 3 - Configuration LAN Settings This section will allow you to change the local network settings of the access point and to congure the DHCP settings. LAN Connection T ype: IP Address: Subnet Mask: Default Gateway: Device Name: Use the drop-down menu to select Dynamic I P (DHCP) to automatically obtain an I ...

  • D-Link DAP-1350 - page 53

    53 D-Link DAP-1350 User Manual Section 3 - Configuration Logout This section will allow you to change the local network settings of the access point and to congure the DHCP settings. ...

  • D-Link DAP-1350 - page 54

    54 D-Link DAP-1350 User Manual Section 3 - Configuration Advanced Wireless T ransmit Power: RTS Threshold: Fragmentation Threshold: Short GI: Sets the transmit power of the antennas. No te : T r an sm i t pow er is re gu la te d by int er na ti on al standard. Users are forbidden to change its maximum limit. This value should remain at its default ...

  • D-Link DAP-1350 - page 55

    55 D-Link DAP-1350 User Manual Section 3 - Configuration Enter a new password for the Administrator Login Name. The administrator can make changes to the settings. Enter the same password that you entered in the previous textbox in order to conrm its accuracy. Enables a challenge-response test to require users to type letters or numbe rs from a ...

  • D-Link DAP-1350 - page 56

    56 D-Link DAP-1350 User Manual Section 3 - Configuration Save to Local Hard Drive: Load from Local Hard Drive: Restore to Factory Default: Reboot the Device: Use this option to save the current access point conguration settings to a le on the hard disk of the computer you are using. Click the Save button. You will then see a le dialog whe ...

  • D-Link DAP-1350 - page 57

    57 D-Link DAP-1350 User Manual Section 3 - Configuration Browse: Upload: After you have downloaded the new rmware, click Br o ws e to l oc a te t h e rm w ar e u pd a te o n y ou r hard drive. Click Upload to complete the rmware upgrade. On ce you ha ve a r mwa r e upd ate o n you r co mp ute r, use this opti on to br ow se for the  ...

  • D-Link DAP-1350 - page 58

    58 D-Link DAP-1350 User Manual Section 3 - Configuration Time Zone: Daylight Saving: Enable NTP Server: NTP Server Used: Date and Time: Select the Time Zone from the drop-down menu. To select Daylight Saving time manually, click the Enable Daylight Saving check box. Next use the drop-down menu to select a Daylight Saving Offset and then enter a st ...

  • D-Link DAP-1350 - page 59

    59 D-Link DAP-1350 User Manual Section 3 - Configuration General: LAN: Wireless LAN: Displays the access point’s time and rmware version. Displays the MAC address and the private (local) IP settings for the access point. Displays the wireless MAC address and your wireless settings such as SSID and Channel. Device Info This page displays the c ...

  • D-Link DAP-1350 - page 60

    60 D-Link DAP-1350 User Manual Section 3 - Configuration Log Options: First Page: Last Page: Previous: Next: Clear: Log Settings: Refresh: You can select the types of messages that you want to display from the log: System Activity , Debug Information , Attacks , Dropped Packets , and Notice . Select and click Apply Log Settings Now . This button d ...

  • D-Link DAP-1350 - page 61

    61 D-Link DAP-1350 User Manual Section 3 - Configuration Statistics T h e D A P - 13 5 0 k ee ps s t a ti s ti c s o f th e tr af c t h a t p as se s t h ro u gh i t . Y o u c a n v i e w th e am o un t of p ac k et s th at p a ss t h r o ug h t h e LA N a n d w ir e le s s p or t io n s o f t he ne t wo r k. Th e t r af  c c ou n te r w i l ...

  • D-Link DAP-1350 - page 62

    62 D-Link DAP-1350 User Manual Section 3 - Configuration Help ...

  • D-Link DAP-1350 - page 63

    63 D-Link DAP-1350 User Manual Section 3 - Configuration Router Mode If you wish to change the default settings or optimize the performance of the DAP-1350, you may use the web-based conguration utility. To access the conguration utility, open a web browser such as Internet Explorer and enter dlinkap o r 192.168.0.50 in the address eld. T ...

  • D-Link DAP-1350 - page 64

    64 D-Link DAP-1350 User Manual Section 3 - Configuration Click Launch Internet Connection Setup Wizard to begin. If you want to enter your settings without running the wizard, click Manual Internet Conguration Setup and skip to page 65. Setup Wizard Click Next to continue. Create a new password and then click Next to continue. ...

  • D-Link DAP-1350 - page 65

    65 D-Link DAP-1350 User Manual Section 3 - Configuration Sele ct your time zone from the drop -dow n menu and then click Next to continue. Select the type of Internet connection you use and then click Next to continue. ...

  • D-Link DAP-1350 - page 66

    66 D-Link DAP-1350 User Manual Section 3 - Configuration If you selected Dynamic, you may need to enter the MA C add re ss of th e co mp ut er th at wa s la st co nn e ct ed dir ec tl y to your mode m. If you are cur ren tly usi ng that co mpu te r, cli ck Cl one Yo ur PC’ s MAC Ad dre ss an d then click Next to continue. The Host Name is option ...

  • D-Link DAP-1350 - page 67

    67 D-Link DAP-1350 User Manual Section 3 - Configuration Internet Setup If you opt to set up your Internet connection manually, you will be redirected to a WAN page that allows you to select your Internet type and enter the correct conguration parameters. Select your Internet connection type using the “ My Internet Connection is” drop-down ...

  • D-Link DAP-1350 - page 68

    68 D-Link DAP-1350 User Manual Section 3 - Configuration Dynamic IP (DHCP) Select Dynamic IP(DHCP) to obtain IP Address information automatically from your ISP. Select this option if your ISP does not give you any IP number to use. This option is commonly used for Cable modem services. Host Name: Use Unicasting: DNS Server: MTU: MAC Address: The H ...

  • D-Link DAP-1350 - page 69

    69 D-Link DAP-1350 User Manual Section 3 - Configuration Static IP Select Static IP if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. IP Address: Subnet Mask: Default Gateway: Primary DNS Ser ver: Secondary DNS Ser ver: ...

  • D-Link DAP-1350 - page 70

    70 D-Link DAP-1350 User Manual Section 3 - Configuration PPPoE Select PPPoE (Point-to-Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your computer. The software is no longer needed ...

  • D-Link DAP-1350 - page 71

    71 D-Link DAP-1350 User Manual Section 3 - Configuration PPTP Choose PPTP (Point-to-Point Tunneling Protocol) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. PPTP IP Address: PPTP Subnet Mask: PPTP Server IP Address: Username: Password: Reconnect Mode: Maxi ...

  • D-Link DAP-1350 - page 72

    72 D-Link DAP-1350 User Manual Section 3 - Configuration L2TP Choose L2TP (Point-to-Point Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. PPTP IP Address: PPTP Subnet Mask: PPTP Server IP Address: Username: Password: Reconnect Mode: Maxi ...

  • D-Link DAP-1350 - page 73

    73 D-Link DAP-1350 User Manual Section 3 - Configuration 3G Mobile Connection Choose USB3G if you want to connect your router to the Internet through a compatible D-Link 3G USB adapter. Plug in your USB 3G adapter to the DAP-1350’s USB port, then select USB3G from the drop down box and click on Save Settings . Your DAP-1350 will reboot and auto- ...

  • D-Link DAP-1350 - page 74

    74 D-Link DAP-1350 User Manual Section 3 - Configuration Select Always-on , On Demand , or Manual to congure how the DAP-1350 stays connected. Enter the maximum idle time during which the Internet connection is maintained during inactivity. This function does not apply if you have selected Reconnect Mode as Always on . Set the number of seconds ...

  • D-Link DAP-1350 - page 75

    75 D-Link DAP-1350 User Manual Section 3 - Configuration Wireless Setup Wizard You may cli ck Wir el ess Netwo rk Setup Wizar d to quickly congure your router. Refer to the next page. To set up your wireless network, click Add Wireless Device With WPS and skip to page 76. If you want to enter your settings without running the wizard, click Manu ...

  • D-Link DAP-1350 - page 76

    76 D-Link DAP-1350 User Manual Section 3 - Configuration Type your desired wireless network name (SSID). Au tom ati cal ly: Sel ect thi s op tio n to aut oma ti ca lly generate the router’s network key and click Next . Manually: Select this option to manually enter your network key and click Next . If you sele cte d Aut oma tic all y , the summ ...

  • D-Link DAP-1350 - page 77

    77 D-Link DAP-1350 User Manual Section 3 - Configuration If you selected Manually assign a network key as the conguration method, enter your network key. This key must be entered on your wireless clients. Check the Use WPA encryption instead of WEP box to use WPA Encryption instead of WEP. Click Next to continue. For WEP encryption, enter a Net ...

  • D-Link DAP-1350 - page 78

    78 D-Link DAP-1350 User Manual Section 3 - Configuration If you select WPA , enter the wireless security password (8-32 characters). Click Next to complete the Setup Wizard. Click Next to continue. The summary screen will appear. Click Save to continue. The summary screen will appear. Click Save to continue. ...

  • D-Link DAP-1350 - page 79

    79 D-Link DAP-1350 User Manual Section 3 - Configuration From the Setup > Wireless Settings screen, click A d d Wireless Device with WPS . Add Wireless Device with WPS Wizard PIN: Select this option to use PIN method. In order to use this method you must know the wireless client’s 8 digit PIN and click Connect . PBC: Select this option to use ...

  • D-Link DAP-1350 - page 80

    80 D-Link DAP-1350 User Manual Section 3 - Configuration Wireless Settings Enable Wireless: Wireless Network Name: Wireless Mode: Enable Auto Channel Scan: Wireless Channel: T ransmission Rate: Channel Width: Visibility Status: Wireless Security Mode: Select this to turn the Wi-Fi module on and off. Use the drop-down box to select if you want to u ...

  • D-Link DAP-1350 - page 81

    81 D-Link DAP-1350 User Manual Section 3 - Configuration Network Settings Enter the IP address of the router. The default IP address is 192.168.0.1. If you change the IP address, once you click Apply , you will need to enter the new IP address in your browser to get back into the conguration utility. Enter the Subnet Mask. The default subnet ma ...

  • D-Link DAP-1350 - page 82

    82 D-Link DAP-1350 User Manual Section 3 - Configuration Check this box to enable the DHCP server on your router. Uncheck to disable this function. Enter the starting and ending IP addresses for the DHCP server’s IP assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are out ...

  • D-Link DAP-1350 - page 83

    83 D-Link DAP-1350 User Manual Section 3 - Configuration DHCP Reser vation If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the IP address only to that computer or device. Note: This IP address must be within the DHCP IP Address Range. Check this box to enable t ...

  • D-Link DAP-1350 - page 84

    84 D-Link DAP-1350 User Manual Section 3 - Configuration USB Settings Use this section to congure your USB port. Share Port will be selected. Note: If using the SharePort option, users will need to install the SharePort Utility into the computers to share the USB device through the router. Please see the SharePort Manual on the CD for more info ...

  • D-Link DAP-1350 - page 85

    85 D-Link DAP-1350 User Manual Section 3 - Configuration The DAP-1350 can be congured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network). The DAP-1350 rewall feature lters out unrecogn ized packets to protec t you ...

  • D-Link DAP-1350 - page 86

    86 D-Link DAP-1350 User Manual Section 3 - Configuration This will allow you to open ports (port forwarding). Enter a name for the rule or select an application from the drop-down menu. Select an application and click << to populate the elds. Enter the IP address of the computer on your local network that you want to allow the incoming se ...

  • D-Link DAP-1350 - page 87

    87 D-Link DAP-1350 User Manual Section 3 - Configuration Application Rules Enter a name for the rule. You may select a pre-dened application from the drop-down menu and click << . This is the port used to trigger the application. It can be either a single port or a range of ports. Select the protocol of the trigger port (TCP, UDP, or Both ...

  • D-Link DAP-1350 - page 88

    88 D-Link DAP-1350 User Manual Section 3 - Configuration MAC Address Filter Select Turn MAC Filtering Off, allow MAC ad dr ess es lis te d be low , or den y MA C ad dr esse s listed below from the drop-down menu. Enter the MAC add ress you woul d li ke t o l ter. To nd the MAC add res s on a comput er, ple ase refer to the Networking Basics ...

  • D-Link DAP-1350 - page 89

    89 D-Link DAP-1350 User Manual Section 3 - Configuration Enter the keywords or URLs that you want to block (or allo w). Any URL with the keyword in it will be blocked. Website URL/ Domain: Website Filters are used to deny LAN computers from accessing specic web sites by the URL or domain. A URL is a specially formatted text string that denes ...

  • D-Link DAP-1350 - page 90

    90 D-Link DAP-1350 User Manual Section 3 - Configuration SPI (Stateful Packet Inspection, also known as dynamic packet ltering) helps to prevent cyber attacks by tracking more state per session. It validates that the trafc passing through the session conforms to the protocol. Select one of the following for TCP and UDP ports: Endpoint Indepe ...

  • D-Link DAP-1350 - page 91

    91 D-Link DAP-1350 User Manual Section 3 - Configuration Set the transmit power of the antennas. Note: Transmit power is regulated by international standard. Users are forbidden to change its maximum limit. Beacons are packets sent by an Access Point to synchronize a wireless network. Specify a value. 100 is the default setting and is recommended. ...

  • D-Link DAP-1350 - page 92

    92 D-Link DAP-1350 User Manual Section 3 - Configuration Enable the Wi-Fi Protected Setup feature. Locking the wireless security settings prevents the set ti ngs from bein g chang ed by the Wi-F i Prot ect ed Setup feature of the router. Devices can still be added to the network using Wi-Fi Protected Setup. Ho we ver , the set tin gs of th e ne tw ...

  • D-Link DAP-1350 - page 93

    93 D-Link DAP-1350 User Manual Section 3 - Configuration This Wizard helps you add wireless devices to the wireless network. The wizard will either display the wireless network settings to guide you through manual conguration, prompt you to enter the PIN for the device, or ask you to press the conguration button on the device. If the device ...

  • D-Link DAP-1350 - page 94

    94 D-Link DAP-1350 User Manual Section 3 - Configuration To use the Universal Plug and Play (UPnP ™ ) feature click on Enabled . UPnP provides compatibility with networking equipment, software and peripherals. UPnP Settings: UPnP Settings ...

  • D-Link DAP-1350 - page 95

    95 D-Link DAP-1350 User Manual Section 3 - Configuration Guest Zone Check to enable the Guest Zone feature. Th e sch edul e of ti me when the Gues t Zo ne will be active . The schedul e may be set to Alwa ys, wh ic h wil l all ow the pa rt ic ul ar serv ic e to al wa ys be enabled. You can create your own times in the Tools > Schedules section. ...

  • D-Link DAP-1350 - page 96

    96 D-Link DAP-1350 User Manual Section 3 - Configuration DMZ Check this box to enable DMZ. Enter the IP address of the computer you would like to open all ports to. You can select a computer from the Computer Name drop-down menu and click << to enter the computer name into the DMZ Host IP Address eld. Enable DMZ: DMZ Host IP Address: This ...

  • D-Link DAP-1350 - page 97

    97 D-Link DAP-1350 User Manual Section 3 - Configuration Enter a new password for the Administrator Login Name. The administrator can make changes to the settings. Enter the new password for the User login. If you login as the User, you can only see the settings, but cannot change them. Enter a name for the DAP-1350 router. En ab les a ch al len g ...

  • D-Link DAP-1350 - page 98

    98 D-Link DAP-1350 User Manual Section 3 - Configuration T ime Settings Select the Time Zone from the drop-down menu. To select Daylight Saving time manually, select enabled or disabled, and enter a start date and an end date for daylight saving time. NTP is short for Network Time Protocol. NTP syn chr on ize s compu ter clock time s in a netw or ...

  • D-Link DAP-1350 - page 99

    99 D-Link DAP-1350 User Manual Section 3 - Configuration SysLog The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs to a SysLog server on your network. Enable Logging to SysLog Server: SysLog Server IP Address: Check this box to send the router logs to a SysLog Server. The address of t ...

  • D-Link DAP-1350 - page 100

    100 D-Link DAP-1350 User Manual Section 3 - Configuration Use this option to save the current router conguration settings to a le on the hard disk of the computer you are using. First, click the Save button. You will then see a le dialog, where you can select a location and le name for the settings. Use this option to load previously s ...

  • D-Link DAP-1350 - page 101

    101 D-Link DAP-1350 User Manual Section 3 - Configuration Cl ick on Che ck Onl ine No w fo r La t es t Fi r mw are Ve rsi o n to n d out if th ere is an up dat ed r mwa re; if so, download the new rmware to your hard drive. After you have downloaded the new rmware, click Browse to locate the rmware update on your hard drive. Click U ...

  • D-Link DAP-1350 - page 102

    102 D-Link DAP-1350 User Manual Section 3 - Configuration Enter a name for your new schedule. Select a day , a range of day s, or All Week to include every day. Check All Day - 24hrs or enter a start and end time for your schedule. Click Save to save your schedule. You must click Save Settings at the top for your schedules to go into effect. The l ...

  • D-Link DAP-1350 - page 103

    103 D-Link DAP-1350 User Manual Section 3 - Configuration This page displays the current information for the DAP-1350. It will display the LAN, WAN (Internet), and Wireless information. If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use Release to disconnect from your ISP ...

  • D-Link DAP-1350 - page 104

    104 D-Link DAP-1350 User Manual Section 3 - Configuration The wireless client table displays a list of current connected wireless clients. This table also displays the connection rate and MAC address of the connected wireless clients. Wireless ...

  • D-Link DAP-1350 - page 105

    105 D-Link DAP-1350 User Manual Section 3 - Configuration Logs Log Options: First Page: Last Page: Previous: Next: Clear: Log Settings: Refresh: Save Log: You can select the types of messages that you want to display from the log: System Activity , Debug Information , Attacks , Dropped Packets , and Notice . Select and click Apply Log Settings Now ...

  • D-Link DAP-1350 - page 106

    106 D-Link DAP-1350 User Manual Section 3 - Configuration Statistics T h e sc re en be lo w di sp la y s th e Tr af  c St at i st i cs . He re yo u ca n vi ew th e am ou n t of pa ck e ts th at pa ss th ro u gh th e DA P- 13 5 0 on the Internet, wireless, and the LAN ports. The trafc counter will reset if the device is rebooted. ...

  • D-Link DAP-1350 - page 107

    107 D-Link DAP-1350 User Manual Section 3 - Configuration Internet Sessions The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN- side computer. Local: NA T : Internet: Pro ...

  • D-Link DAP-1350 - page 108

    108 D-Link DAP-1350 User Manual Section 3 - Configuration Dir: Priority: Time Out: The direction of initiation of the conversation: Out - Initiated from LAN to WAN. In - Initiated from WAN to LAN. The preference given to outbound packets of this conversation by the QoS Engine logic. Smaller numbers represent higher priority. The number of seconds ...

  • D-Link DAP-1350 - page 109

    109 D-Link DAP-1350 User Manual Section 3 - Configuration Help ...

  • D-Link DAP-1350 - page 110

    110 D-Link DAP-1350 User Manual Section 4 - Security Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DAP-1350 offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) • WPA2-PSK (Pre-Shared Key) • WPA (Wi-Fi Protected Access) • WPA-PSK (Pre-S ...

  • D-Link DAP-1350 - page 111

    111 D-Link DAP-1350 User Manual Section 4 - Security What is WP A? WPA, or Wi-Fi Protected Access, is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy). The 2 major improvements over WEP: • Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using ...

  • D-Link DAP-1350 - page 112

    112 D-Link DAP-1350 User Manual Section 4 - Security Configure WEP It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead. 1. Log into the web-ba ...

  • D-Link DAP-1350 - page 113

    113 D-Link DAP-1350 User Manual Section 4 - Security Configure WP A/WP A2 Personal It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead. 1. Lo ...

  • D-Link DAP-1350 - page 114

    114 D-Link DAP-1350 User Manual Section 4 - Security It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead. 1. Log into the web -b as ed con g ...

  • D-Link DAP-1350 - page 115

    115 D-Link DAP-1350 User Manual Section 4 - Security Using Windows ® 7 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Cli ck on the wi re le ss ic o ...

  • D-Link DAP-1350 - page 116

    116 D-Link DAP-1350 User Manual Section 4 - Security 3 . Highlight the wireless network (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Ne tw orki ng Ba si cs se ct ion in thi s man ua l for mo re in fo rmat ...

  • D-Link DAP-1350 - page 117

    117 D-Link DAP-1350 User Manual Section 4 - Security 5. Enter the same security key or passphrase that is on your router and click Connect . You can also connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The ke ...

  • D-Link DAP-1350 - page 118

    118 D-Link DAP-1350 User Manual Section 5 - Connecting to a Wireless Network Connect to a Wireless Network Using Windows Vista ® Windows Vista ® users may use the convenient, built-in wireless utility. Follow these instructions: From the Start menu, go to Control Panel, and then click on Network and Sharing Center . The utility will display any a ...

  • D-Link DAP-1350 - page 119

    119 D-Link DAP-1350 User Manual Section 5 - Connecting to a Wireless Network Click Connect Anyway to continue. The utility will display the following window to indicate a connection is being made. The nal window indicates the establishment of a successful connection. The next two pages display the windows used to connect to either a WEP or a WPA ...

  • D-Link DAP-1350 - page 120

    120 D-Link DAP-1350 User Manual Section 5 - Connecting to a Wireless Network Click on a network (displayed using the SSID) using WEP under Select a network to connect to and then click the Connect button. Enter the appropriate security key or passphrase in the eld provided and then click the Connect button. Configure WEP It is recommended to en ...

  • D-Link DAP-1350 - page 121

    121 D-Link DAP-1350 User Manual Section 5 - Connecting to a Wireless Network Click on a network (displayed using the SSID) using WPA-PSK und er Sel ect a net wor k to conn ec t to and the n cli ck the Conn ec t button. Enter the appropriate security key or passphrase in the eld provided and then click the Connect button. Configure WP A-PSK It i ...

  • D-Link DAP-1350 - page 122

    122 D-Link DAP-1350 User Manual Section 5 - Connecting to a Wireless Network Connect to a Wireless Network Using Windows ® XP Windows ® XP users may use the built-in wireless utility (Zero Conguration Utility). The following instructions are for Service Pack 2 users. If you are using another company’s utility or Windows ® 2000, please refer ...

  • D-Link DAP-1350 - page 123

    123 D-Link DAP-1350 User Manual Section 5 - Connecting to a Wireless Network Configure WEP It is recommended to enable WEP on your wireless bridge or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the WEP key being used. 2. Highlight the wireless network (SSID) you would like t ...

  • D-Link DAP-1350 - page 124

    124 D-Link DAP-1350 User Manual Section 5 - Connecting to a Wireless Network 3. The Wireless Network Connection box will appear. Enter the same WEP key that is on your access point and click Connect. It may take 20-30 seconds to connect to the wireless network. If the con ne cti on fail s, plea se veri fy th at th e WEP set tin gs are co rre ct. Th ...

  • D-Link DAP-1350 - page 125

    125 D-Link DAP-1350 User Manual Section 5 - Connecting to a Wireless Network Configure WP A-PSK It is recommended to enable WEP on your wireless bridge or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the WEP key being used. 2. Highlight the wireless network (SSID) you would l ...

  • D-Link DAP-1350 - page 126

    126 D-Link DAP-1350 User Manual Section 5 - Connecting to a Wireless Network 3. The Wireless Network Connection box will appear. Enter the WPA-PSK passphrase and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be ex ...

  • D-Link DAP-1350 - page 127

    127 D-Link DAP-1350 User Manual Section 6 - T roubleshooting T roubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DAP-1350. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows ® XP. If you have a different operating system, th ...

  • D-Link DAP-1350 - page 128

    128 D-Link DAP-1350 User Manual Section 6 - T roubleshooting • Congure your Internet settings: • Go to Start > Settings > Control Panel . Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. • Click the Connection tab and set the dial-up option to Never Dial a Conn ...

  • D-Link DAP-1350 - page 129

    129 D-Link DAP-1350 User Manual Section 6 - T roubleshooting 3. Why can’t I connect to certain sites or send and receive emails when connecting through my pocket router (router mode only)? If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in ...

  • D-Link DAP-1350 - page 130

    130 D-Link DAP-1350 User Manual Section 6 - T roubleshooting You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size ...

  • D-Link DAP-1350 - page 131

    131 D-Link DAP-1350 User Manual Appendix A - Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to s ...

  • D-Link DAP-1350 - page 132

    132 D-Link DAP-1350 User Manual Appendix A - Wireless Basics What is Wireless? Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or ofce. D-Link is the worldwide leader and ...

  • D-Link DAP-1350 - page 133

    133 D-Link DAP-1350 User Manual Appendix A - Wireless Basics Wireless Personal Area Network (WPAN) Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use near ...

  • D-Link DAP-1350 - page 134

    134 D-Link DAP-1350 User Manual Appendix A - Wireless Basics Where is wireless used? Wireless technology is expanding everywhere not just at home or ofce. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places ...

  • D-Link DAP-1350 - page 135

    135 D-Link DAP-1350 User Manual Appendix A - Wireless Basics Security Don’t let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the access point. Refer to product manual for detail information on how to set it up. There are basically two modes of ...

  • D-Link DAP-1350 - page 136

    136 D-Link DAP-1350 User Manual Appendix B - Networking Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > ...

  • D-Link DAP-1350 - page 137

    137 D-Link DAP-1350 User Manual Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/access point, or you need to assign a static IP address, please follow the steps below: Step 1 Windows Vista ® - Clic k on Start > Cont rol Panel > Networ k and Inter net > Net work and Shari ng Cent e ...

  • D-Link DAP-1350 - page 138

    138 D-Link DAP-1350 User Manual Appendix C - T echnical Specifications T echnical Specifications Standards • IEEE 802.11n • IEEE 802.11g • IEEE 802.3 • IEEE 802.3u Security • Wi-Fi Protected Access (WPA, WPA2) ® • Wi-Fi Protected Setup ™ (WPS) - WPS Push Button - PIN Interface Type • 1 10/100 LAN/WAN Port • 1 USB Port for Share ...

Manufacturer D-Link Category Network Router

Documents that we receive from a manufacturer of a D-Link DAP-1350 can be divided into several groups. They are, among others:
- D-Link technical drawings
- DAP-1350 manuals
- D-Link product data sheets
- information booklets
- or energy labels D-Link DAP-1350
All of them are important, but the most important information from the point of view of use of the device are in the user manual D-Link DAP-1350.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals D-Link DAP-1350, service manual, brief instructions and user manuals D-Link DAP-1350. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product D-Link DAP-1350.

Similar manuals

A complete manual for the device D-Link DAP-1350, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use D-Link DAP-1350 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of D-Link DAP-1350.

A complete D-Link manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual D-Link DAP-1350 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the D-Link DAP-1350, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the D-Link DAP-1350, that we can find in the current document
3. Tips how to use the basic functions of the device D-Link DAP-1350 - which should help us in our first steps of using D-Link DAP-1350
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with D-Link DAP-1350
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of D-Link DAP-1350 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning D-Link DAP-1350?

Use the form below

If you did not solve your problem by using a manual D-Link DAP-1350, ask a question using the form below. If a user had a similar problem with D-Link DAP-1350 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)