English dropdown-ico

Manual APC 6000 VA

13 pages 0.09 mb
Download

Go to site of 13

Summary
  • APC 6000 VA - page 1

    CSI SECTION 16611 STATIC UNINTERR UPTIBLE SYSTEM APC Smart-UPS RT BID SPECIFICATIONS FOR 3000VA, 5000VA and 6000 VA Smart-UPS RT 230VAC Uninterruptible Power Supply PART 1 - GENERAL 1.1 SUMMARY A. This specification describes the operation and functionality of a continuous duty, single- phase, solid-state, static Uninterruptible Po wer System (UPS) ...

  • APC 6000 VA - page 2

    CSI SECTION 16611 STATIC UNINTERR UPTIBLE SYSTEM H. Configuration Specifics: The UPS is available in one of the following configurations: MODEL SKU # TOWER APC Smart-UPS RT 3000VA RM 230V SURT3000XLI APC Smart-UPS RT 5000VA RM 230V SURT5000XLI APC Smart-UPS RT 6000VA RM 230V SURT6000XLI RACK MOUNT APC Smart-UPS RT 3000VA RM 230V SURT3000RMXLI APC S ...

  • APC 6000 VA - page 3

    CSI SECTION 16611 STATIC UNINTERR UPTIBLE SYSTEM A. Online: The input PFC power stage and the output power stage (inverter) shall operate in an on-line manner to continuously re gulate power to the critical load. The input PFC stage shall be capable of full battery rech arge while simultaneously providing regulated power to the load for all line an ...

  • APC 6000 VA - page 4

    CSI SECTION 16611 STATIC UNINTERR UPTIBLE SYSTEM 2.1 MECHANICAL DESIGN A. The UPS is contained in a rugged steel cabinet with two plastic front bezels; B. The UPS dimensions are 13 x 43 x 66cm (5.1 x 17 x 26 in.); C. The UPS cabinet is capable of conversion between Tower and Rack-Mount configurations; 2.2 SYSTEM CHARACTERISTICS A. System Capacity: ...

  • APC 6000 VA - page 5

    CSI SECTION 16611 STATIC UNINTERR UPTIBLE SYSTEM 3. Output frequency: 50/60 +/- 3Hz tracking or 5 0/60 +/- 0.1Hz tracking (user selectable); 4. AC output voltage distortion: Max. 2% @ 100% linear load; Max. 5% @ 100% non-linear Load; 5. AC output static voltage regulation: +/-1%; 6. AC output dynamic voltage regulation: +/- 8% maximum for 100% load ...

  • APC 6000 VA - page 6

    CSI SECTION 16611 STATIC UNINTERR UPTIBLE SYSTEM C. Input Current Limit: 1. The input converter shall control and limit the input current draw from utility to 150% of the UPS output. During cond itions where input current limit is active, the UPS shall be able to support 100% load, charge batteries at 10% of the UPS output rating, and provide volta ...

  • APC 6000 VA - page 7

    CSI SECTION 16611 STATIC UNINTERR UPTIBLE SYSTEM condition is removed from the critical bus output of the system. Automatic transfers of load to bypass also take place if for any reason the UPS cannot support the critical bus. D. Manual Transfers: Manually initiated tran sfers to and from bypass may be initiated through the UPS computer interface ( ...

  • APC 6000 VA - page 8

    CSI SECTION 16611 STATIC UNINTERR UPTIBLE SYSTEM 6. Self-diagnostics, self-test and proactive fault detection; 7. Communication to the host server via serial port; 8. Communication to the Network Interface Card or another SmartSlot accessory card if equipped. 9. Etc. B. Display/Control Unit: A display/control comprised of 16 LEDs and 2 pushbutton s ...

  • APC 6000 VA - page 9

    CSI SECTION 16611 STATIC UNINTERR UPTIBLE SYSTEM 6. The UPS is in fault state; 7. The battery needs to be replaced; 8. The battery capacity/utility voltage LED bar G. Audible Alarms: Using audio signal, the UPS will notify the user about important events. The following is the list of distinct audio alarms: 1. The UPS is on battery; 2. The UPS is on ...

  • APC 6000 VA - page 10

    CSI SECTION 16611 STATIC UNINTERR UPTIBLE SYSTEM 3.2 SOFTWARE AND CONNECTIVITY A. Network Adaptor: APC SmartSlot Network Ma nagement Card shall allow one or more network management systems (NMS) to monitor and m anage the UPS in TCP/IP network environments. B. Unattended Shutdown 1. The UPS, in conjunction with a networ k interface card, shall be c ...

  • APC 6000 VA - page 11

    CSI SECTION 16611 STATIC UNINTERR UPTIBLE SYSTEM 7. TurboLinux v.7.0 and 8.0 8. Novell Netware 6.0 with Support Pack 1 9. Novell Netware 6.5 10. Novell Netware 5.1 with Support Pack 3 or above (using PowerChute Business Edition v6.2.2 agent) 11. Sun Solaris 8 and 9 PART 4 - Part 4 - EXECUTION 4.1 FACTORY ASSISTED START-UP If a factory assisted UPS ...

  • APC 6000 VA - page 12

    CSI SECTION 16611 STATIC UNINTERR UPTIBLE SYSTEM 1. Ensure proper system start-up. 2. Verify proper firmware control functions. 3. Verify proper firmware bypass operation. 4. Verify proper bypass switch operation (where applicab le). 5. Verify proper inverter operation and regulation circuits. 6. Simulate utility power failure. 7. Verify proper cha ...

  • APC 6000 VA - page 13

    CSI SECTION 16611 STATIC UNINTERR UPTIBLE SYSTEM CSI SECTION 16611 STATIC UNINTERR UPTIBLE SYSTEM identification and operation, system controls and adjustment, preventative maintenance, and troubleshooting. End Of Section 16611 ...

Manufacturer APC Category Power Supply

Documents that we receive from a manufacturer of a APC 6000 VA can be divided into several groups. They are, among others:
- APC technical drawings
- 6000 VA manuals
- APC product data sheets
- information booklets
- or energy labels APC 6000 VA
All of them are important, but the most important information from the point of view of use of the device are in the user manual APC 6000 VA.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals APC 6000 VA, service manual, brief instructions and user manuals APC 6000 VA. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product APC 6000 VA.

Similar manuals

A complete manual for the device APC 6000 VA, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use APC 6000 VA by users. Manuals are usually written by a technical writer, but in a language understandable to all users of APC 6000 VA.

A complete APC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual APC 6000 VA - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the APC 6000 VA, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the APC 6000 VA, that we can find in the current document
3. Tips how to use the basic functions of the device APC 6000 VA - which should help us in our first steps of using APC 6000 VA
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with APC 6000 VA
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of APC 6000 VA in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning APC 6000 VA?

Use the form below

If you did not solve your problem by using a manual APC 6000 VA, ask a question using the form below. If a user had a similar problem with APC 6000 VA it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)