English dropdown-ico

Manual Giant P200A-3100/5100

12 pages 0.47 mb
Download

Go to site of 12

Summary
  • Giant P200A-3100/5100 - page 1

    Contents: Installation Instructions: page 2 Pump Specifications: pages 3-7 Parts List / Kits: page 8 Torque Specifications: page 8 Exploded View: page 9 Repair Instructions: page 10-11 Warranty Information: back page Triplex Ceramic Plunger Pump Operating Instructions/ Repair and Service Manual Seri e s P 200 A-3100/5100 Updated 3/98 Stainless Stee ...

  • Giant P200A-3100/5100 - page 2

    INSTALLATION INSTRUCTIONS 4. Use of a dampener is necessary to minimize pulsation at drive elements, plumbing, connec- tions, and other system areas. The use of a dampener with Giant Industries, Inc. pumps is optional, although recommended by Giant Industries, Inc. to further reduce system pulsa- tion. Dampeners can also reduce the severity of pres ...

  • Giant P200A-3100/5100 - page 3

    P217A-3100/5100 HORSEPOWER REQUIREMENTS RPM GPM 800 PSI 1200 PSI 1500 PSI 1700 PSI 2000 PSI 1725 1.7 0.9 1.4 1.7 2.0 2.3 3000 3.0 1.7 2.5 3.1 3.5 4.1 3200 3.2 1.8 2.6 3.3 3.8 4.4 3450 3.4 1.9 2.8 3.5 4.0 4.7 Specifications Model P217A-3100/5100 NOTE: In order to drive the pump from the side opposite the present shaft extension, simply remove the va ...

  • Giant P200A-3100/5100 - page 4

    P218A-3100/5100 HORSEPOWER REQUIREMENTS RPM GPM 800 PSI 1200 PSI 1500 PSI 1700 PSI 2000 PSI 1150 2.1 1.2 1.7 2.2 2.5 2.9 1450 2.6 1.5 2.2 2.7 3.1 3.6 1750 3.4 1.9 2.8 3.5 4.0 4.7 NOTE: In order to drive the pump from the side opposite the present shaft extension, simply remove the valve casing from the crank- case and rotate the pumps 180 degrees t ...

  • Giant P200A-3100/5100 - page 5

    V olume ....................................................................................................... Up to 4.2 GPM Discharge Pressure ..................................................................................... Up to 2000 PSI Inlet Pressure ......................................................................................... ...

  • Giant P200A-3100/5100 - page 6

    Specifications Model P220A-3100/5100 V olume ....................................................................................................... Up to 4.7GPM Discharge Pressure ..................................................................................... Up to 2000 PSI Inlet Pressure ..................................................... ...

  • Giant P200A-3100/5100 - page 7

    Specifications Model P221A-3100 NOTE: In order to drive the pump from the side opposite the present shaft extension, simply remove the valve casing from the crank- case and rotate the pumps 180 degrees to the desired position. Be certain to rotate the seal case (item #20) as well, so that the weep holes are down at the six o'clock position. Ex ...

  • Giant P200A-3100/5100 - page 8

    ITE M PART NO. DESCRIPTION QTY. 1 08300 Crankcase 1 2 08301 Dipstick (Except P217, black ) 1 2 08480 Dipstick (P217, red ) 1 3 08302 Crankcase Plug Cover 1 3A 07190 Drain Plug & Gasket 1 4 08005 O-Ring 1 5 08185 Oil Drain Plug 1 6 07188-0100 Screw, 316 S.S. 4 6A 07223-0100 Spring Washer, 316 S.S. 7 08303 Bearing Cover I 2 8 08490 Sight Glass 1 ...

  • Giant P200A-3100/5100 - page 9

    Exploded View - P200A-3100/5100 Series Unique for P221- 3100 or ...

  • Giant P200A-3100/5100 - page 10

    REPAIR INSTRUCTION - P200A-3100/5100 SERIES Disassembly sequence of fluid end of P200A-3100/5100 series pump Note: Always take time to lubricate all metal and nonmetal parts with a light film of oil before reassembly. This step will ensure proper fit, at the same time protecting the pump nonmetal parts (i.e., the elas- tomers) from cutting and scor ...

  • Giant P200A-3100/5100 - page 11

    Disassembly sequence of the back end of the P200A-3100/5100 series pump. 1 ) Before you begin, drain the oil from the crankcase. 2) Remove the crankcase cover (3) and o-ring (4) from the crankcase (1). To remove the crankshaft (13), remove the bearing cover (7) and sight glass (8). Using a rubber mallet, remove the crankshaft axially through the co ...

  • Giant P200A-3100/5100 - page 12

    GIANT INDUSTRIES, INC. , 900 N. Westwood Ave., P.O. Box 3187, Toledo, Ohio 43607 PHONE (419) 531-4600, FAX (419) 531-6836, www.giantpumps.com  Copyright 1998 Giant Industries, Inc. P200A-3100/5100 DIMENSIONS (mm) 3/98 P200A-3100.PM6 GIANT INDUSTRIES LIMITED WARRANTY Giant Industries, Inc. pumps and accessories are warranted by the manufacturer t ...

Manufacturer Giant Category Plumbing Product

Documents that we receive from a manufacturer of a Giant P200A-3100/5100 can be divided into several groups. They are, among others:
- Giant technical drawings
- P200A-3100/5100 manuals
- Giant product data sheets
- information booklets
- or energy labels Giant P200A-3100/5100
All of them are important, but the most important information from the point of view of use of the device are in the user manual Giant P200A-3100/5100.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Giant P200A-3100/5100, service manual, brief instructions and user manuals Giant P200A-3100/5100. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Giant P200A-3100/5100.

Similar manuals

A complete manual for the device Giant P200A-3100/5100, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Giant P200A-3100/5100 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Giant P200A-3100/5100.

A complete Giant manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Giant P200A-3100/5100 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Giant P200A-3100/5100, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Giant P200A-3100/5100, that we can find in the current document
3. Tips how to use the basic functions of the device Giant P200A-3100/5100 - which should help us in our first steps of using Giant P200A-3100/5100
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Giant P200A-3100/5100
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Giant P200A-3100/5100 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Giant P200A-3100/5100?

Use the form below

If you did not solve your problem by using a manual Giant P200A-3100/5100, ask a question using the form below. If a user had a similar problem with Giant P200A-3100/5100 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)