-
AEG AGN2451 - page 1
AGN2451 AGN2901 EN FREEZER USER MANUAL ...
-
AEG AGN2451 - page 2
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG we ...
-
AEG AGN2451 - page 3
CONTENTS 4 Safety information 6 Control panel 9 First use 10 Daily use 11 Helpful hints and tips 12 Care and cleaning 13 What to do if… 15 Technical data 15 Installation 19 Noises 21 Environmental concerns The following symbols are used in this user manual : Important information concerning your personal safety and information on how to avoid dam ...
-
AEG AGN2451 - page 4
SAFETY INFORMATIO N In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the ap- pliance are thoroughly familiar with its operation ...
-
AEG AGN2451 - page 5
– thoroughly ventilate the room in which the appliance is situated • It is dangerous to alter the specifications or modify this product in any wa y. Any damage to the cord may cause a short - circuit, fire and/or electric shock. WARNING! Any electrical component (power cord, plug, co mpres sor) must be replaced by a certified service agent or q ...
-
AEG AGN2451 - page 6
• Never use a hair drier or other heating appliances to speed up defrosting. Excessive heat may damage the plastic interior, and humidity could enter the electric system making it live. Installati on For electrical connection carefully follow the instructions given in specific paragraphs. • Unpack the appliance and check if there are damages on ...
-
AEG AGN2451 - page 7
2 Temperature warmer button 3 Temperature colder button 4 OK button 5 Mode button 6 ON/OFF button It is possible to change predefined sound of buttons to a loudly one by press ing together Mode button and Temperature colder button fo r some seconds. Change is reversible. Display/Indicator 3 4 5 6 2 1 1 Timer indica tor 2 FROSTMATIC function 3 Minut ...
-
AEG AGN2451 - page 8
• - 18°C for the freezer The temperature indicator shows the set temperature. The set temperature will be reached within 24 hours. After a power failure the set temperature remains stored. FROSTMATIC function To switch on the function: 1. Press the Mode button until the corresponding icon appears. The FROSTMATIC indicator flashes. 2. Press the O ...
-
AEG AGN2451 - page 9
It is possible to change the time during the co untdown and at the end by pressing the Tem- perature colder button and the Temperature warmer button. Child Lock function To lock the buttons from unintentional operation select the Child Lock function. To switch on the function: 1. Press the Mode button until the corresponding icon appears. 2. The Ch ...
-
AEG AGN2451 - page 10
Check that the drain hose at the rear of the cabi- net discharges into the drip tray. DAILY USE Freezing fresh food The freezer compartment is suitable for fr eezing fresh food and storing frozen and deep - frozen food for a long time. To freeze small amount of fresh foods it is not necessary to change the present setting. To freeze fresh food acti ...
-
AEG AGN2451 - page 11
Removal of freezing ba skets from the freezer The freezing baskets have a limit stop to prevent their accidental removal or falling out. At the time of its removal from the freezer, pull the basket to- wards yourself and, upon reaching the end point, remove the basket by tilting its front upwards. At the time of putting it back, slightly lift the f ...
-
AEG AGN2451 - page 12
• make sure that the commercially frozen foodstuffs were adequately stored by the retai l- er; • be sure that frozen foodstuffs are transferred from the foods tore to the freezer in the shortest possible time; • not open the door frequently or leav e it open longer than absolutely necessary. • Once defrosted, food deteriorates rapidly and c ...
-
AEG AGN2451 - page 13
Make sure the door is open and then: 1. Loosen the upper edge of the grille by pulling outward/downward. 2. Pull the grille straight out to completel y remove it. 3. Vacuum clean under the cabinet. Defrosting of the freezer The freezer compartment of this model, on the other hand, is a "no frost" type. This means that there is no buildup ...
-
AEG AGN2451 - page 14
Problem Possible cause Solution The door is not closed correctly. Refer to "Door open alarm". upper or lower square is shown in the tempera - ture display. An error has occurred in meas- uring the temperature. Call your service representa tive (the cooling system will continue to keep food products cold, but temperature adjustment will no ...
-
AEG AGN2451 - page 15
Problem Possible cause Solution The appliance has no power. There is no voltage in the mains socket. Connect another electrical appli- ance to the mains socket. Check fuse. Cont act a quali fied electr i- cian. The lamp does not work. The lamp is defective. Refer to "Replacing th e lamp". The door has been open to long. Close the door. Do ...
-
AEG AGN2451 - page 16
Positioning Install this appliance at a location where the ambient temperature correspo nds to the cli- mate class indicated on the rating plate of the appliance: Climate class Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C Location To ensure best performance, if the appliance is positioned bel ...
-
AEG AGN2451 - page 17
1. Open the door. 2. Remove the transport support from the door sides. 3. Remove the transport support from the lower hinge (some models). Some models are fitted with a silencing pad under the cabinet. Do not remove this pad. Spacers Install the spacers provided within the accessory bag as shown in the figures. When two appliances are placed beside ...
-
AEG AGN2451 - page 18
Levelling When placing the appliance ensure that it stands level. If necessary adjust the feet using the adjust- ment spanner supplied. Door alignment is dependent on proper levelling. Door reversibility To change the opening direction of the door, do these steps: 1. Remove the plug from the power. 2. Remove the ventilation grille. Remove the fi ll ...
-
AEG AGN2451 - page 19
8. Unscrew the handle. On the opposi te side remove the hole covers by driving a 3 - 4 mm drift or drill into them. Install the handle. Fit the handle on to the opposite side by turning it on half circle. Install the hole covers provided within the accessory bag. 9. Put the cabinet in position. WARNING! Reposition, level the appliance, wait for at ...
-
AEG AGN2451 - page 20
CLICK! CLICK! BRRR! BRRR! BLUBB! BLUBB! HISSS! HISSS! 20 Noises ...
-
AEG AGN2451 - page 21
SSSRRR! SSSRRR! CRACK! CRACK! ENVIRONMENTAL CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will hel ...
-
AEG AGN2451 - page 22
22 ...
-
AEG AGN2451 - page 23
23 ...
-
AEG AGN2451 - page 24
www.aeg.com/shop 298376901 - C - 192011 ...
Do you have a question concerning AEG AGN2451?
Use the form below
If you did not solve your problem by using a manual AEG AGN2451, ask a question using the form below. If a user had a similar problem with AEG AGN2451 it is likely that he will want to share the way to solve it.