English dropdown-ico

Manual Orient Technologies BTP-R880NP

34 pages Not applicable
Download

Go to site of 34

Summary
  • Orient Technologies BTP-R880NP - page 1

    U USER’S MANUAL Receipt Printer BTP-R880NP Shandong New Beiyang Information T echnology Co., Lt d ...

  • Orient Technologies BTP-R880NP - page 2

    BTP-R880NP User’s Manual 1 Declaration Information in this document is subject to change without notice. SHANDONG NEW BEIY ANG INFORMA TION TECHNOLOGY CO., L TD. (hereinafter re ferred to as “SNBC”) reserves the ri ght to improve products as new technology , compone nts, so ftware, and firmware become available. If users need further data abo ...

  • Orient Technologies BTP-R880NP - page 3

    BTP-R880NP User’s Manual 2 General Safety Information Before installing and using the printer, please read the following items carefully. 1. Safety instructions Don’t touch the tear bar of printer. The print head is a thermal element and it is at high temperature du ring printing or just after operation, therefore please do not touch it and its ...

  • Orient Technologies BTP-R880NP - page 4

    BTP-R880NP User’s Manual 3 Content s TU 1 ． INTRODUCTION UT ............................................................................................................................... ........... 1 TU 1.1 O UTLINE UT ............................................................................................................................. ...

  • Orient Technologies BTP-R880NP - page 5

    BTP-R880NP User’s Manual 4 TU 6.4 E THERNET INTERF ACE UT ............................................................................................................................... 16 TU 6.5 WLAN INTERF ACE UT ............................................................................................................................... ..... ...

  • Orient Technologies BTP-R880NP - page 6

    BTP-R880NP User’s Manual - 1 - 1 ． Introduction 1.1 Outline BTP-R880NP is a high performance thermal printer, which can be widely used for real-time printing application, such as POS system , restaurant syste m, ATM, etc. BTP-R880NP can be connected with ot her devices via parallel interfac e, serial interface, USB, Ethernet or WIFI and is avai ...

  • Orient Technologies BTP-R880NP - page 7

    BTP-R880NP User’s Manual - 2 - 2 ． S pecifications 2.1 Main specification Item Specification Color Black or Ivory Print Method Direct Thermal Resolution 203 × 180 DPI(standard) Paper width 57.5/ 69.5/76/80/82.5mm Print width Max. 80mm Standard: Max 230mm/s Gray scale print speed:Max.150mm/s Print speed Bi-colour print speed: Max. 120mm/s Flash ...

  • Orient Technologies BTP-R880NP - page 8

    BTP-R880NP User’s Manual - 3 - Button FEED button LED POWER LED, ERROR LED Machine Interface Buzzer Built-inInternal Buzzer, the volume can be adjusted. Lifetime of print head 150 km(standard test condition) Lifetime of cutter 1,800,000 cu ts(standard test condition) MCBF 60,000,000 lines Reliability MTBF 360,000 hours Operation condition 5°C to ...

  • Orient Technologies BTP-R880NP - page 9

    BTP-R880NP User’s Manual - 4 - z Paper type: Continuous thermal paper z Paper supply method: Paper roll z Paper width: 82.5±0.5mm,80±0.5 mm, 76±0.5 mm,69.5±0.5mm 57±0.5mm z Paper thickness: 0.06mm-0.1mm z Thermal senstive layer: Outside z Paper roll specifications OD(MAX): ф 83mm z Recommended reference paper: Paper type Manufacturer TF50KS ...

  • Orient Technologies BTP-R880NP - page 10

    BTP-R880NP User’s Manual - 5 - Caution: The printer will measure the marks during the printing or feeding process. If the l engths of the mark (L1) is larger than the default value (default: 13 mm), the printer will give a paper-end alarm. 2.4 Print and tear off position 2.4.1 Print position z L1: Paper holder width: 83.5±0.5mm z L2:Max Print wi ...

  • Orient Technologies BTP-R880NP - page 11

    BTP-R880NP User’s Manual - 6 - 3 Outline and component s 3.1 Outline and Parts 1—Power LED 2—Error LED 3—Feed button 4—Tear bar 5—T op cover latch 6—Cutter cover 7—Middle cover 8—Power switch 9—T op cover 10—LOGO plate 1 1—T op cover 12—T op-cover-open sensor 13—Paper sensor 14—Paper guide 15—Paper near-end sensor 16 ...

  • Orient Technologies BTP-R880NP - page 12

    BTP-R880NP User’s Manual - 7 - d- Power switch (8) “O” power is to turn off printer . “—” power is to turn on printer . e- T op cover uplifting alarm sensor Monitor top cover status: open/close. f- Paper end sensor T o detect if p aper is existing or not wh en using continuous paper; T o detect the paper mark when using black mark p ape ...

  • Orient Technologies BTP-R880NP - page 13

    BTP-R880NP User’s Manual - 8 - 4 Inst allation 4.1 Unpacking Check whether all items, which are listed on the pa cking list, are present and in a good condition. If any item is damaged or missing, please contact y our dealer . 4.2 Printer installation The BTP-R880NP can be installed in two positions: hor izontally on a t able or vertically on a w ...

  • Orient Technologies BTP-R880NP - page 14

    BTP-R880NP User’s Manual - 9 - 4.3 Connecting the Power Adapter 1) Confirm the power switch is turned off. 2) Insert the power cord into the pow er socket on the back of the printer. Caution:  Use only the manufacture rs supplied power adapter or other equal model.  When connecting or disconnecting the cable connector of the po wer adapter, ...

  • Orient Technologies BTP-R880NP - page 15

    BTP-R880NP User’s Manual - 10 - 1) Turn off the printer. 2) Open the printer top cover, as in the following figure. 3) Drop in a paper roll in the paper house. 4) Pull the paper roll into the paper holder , and close the printer top cover . 5) T ear of f the surplus portion of the paper by using the tear bar . Caution: User can adjust the paper g ...

  • Orient Technologies BTP-R880NP - page 16

    BTP-R880NP User’s Manual - 1 1 - Paper guide in the slot 3&4: 57 ±0.5mm  Confirm that the paper is rolled ti ghtly on the paper roll, otherwise, paper jam or other fault may occur.  The paper roll should be placed stra ight in the paper compartment and not at an angle. The paper roll should be able to move freely. 4.8 Paper near end ad ...

  • Orient Technologies BTP-R880NP - page 17

    BTP-R880NP User’s Manual - 12 - 4.8.2 Remaining p aper amount adjustment of Paper near end sensor Remaining paper amount can be adjusted by adjus ti ng the position of paper near end sensor Paper near end sensor has six levels, the red mark (actual color on printer is white) shows the current leve l and it can be adjusted to a different position ...

  • Orient Technologies BTP-R880NP - page 18

    BTP-R880NP User’s Manual - 13 - 5 Printer maintenance Caution:  Before starting routine maintenance, confir m that the printer power is turned off.  Do not use solvents like gasoline or acetone.  When cleaning sensors, the prin ter should not be switched on until the pure alcohol has totally evaporated.  It is recommended that the mai ...

  • Orient Technologies BTP-R880NP - page 19

    BTP-R880NP User’s Manual - 14 - Caution:  The cutter sliding blade act s slowly during revo lving the thumb wheel. Go on revolving and observe carefully;  If the thumb wheel cannot be turned, do not force the wheel, instead turn it the opposite direction. ...

  • Orient Technologies BTP-R880NP - page 20

    BTP-R880NP User’s Manual - 15 - 6 Interface Signal 6.1Parallel interface Parallel interface can work in IEEE 1284 comp atible mode or half-byte mode. The interface is 36PIN CENTRONICS. The Interface is defined as below: PIN Source Functio n 1 H nStrobe 2 H Data 0 (Least Significant Bit) 3 H Data 1 4 H Data 2 5 H Data 3 6 H Data 4 7 H Data 5 8 H D ...

  • Orient Technologies BTP-R880NP - page 21

    BTP-R880NP User’s Manual - 16 - 6.2 RS-232 serial interface The serial interface of the printer is comp atible with RS-232, its connector is 25PIN female D type. PIN No. Signal de finition PIN1 Frame Ground PIN2 TXD PIN 3 RXD PIN 4 RTS PIN 5 Not connected PIN6 DSR PIN 7 Sign al Ground PIN 8~19 Not connected PIN 20 DT R PIN 21~25 Not connected Use ...

  • Orient Technologies BTP-R880NP - page 22

    BTP-R880NP User’s Manual - 17 - ¾ Supports status back ¾ Supports parameter configuration ¾ Supports firmware update on-line ¾ Supports printer status query and interfac e module maintenance bas ed on HTTP(only JK-E02 interface supports, while JK-E 04 interface does not support) 2) Interface signal definition Interface adopts 10BASE-T standar ...

  • Orient Technologies BTP-R880NP - page 23

    BTP-R880NP User’s Manual - 18 - requested from the local di stributor or manufacture. 6.6 Power interface definition Power supply interface signal definition PIN Signal Name 1 E 2 L 3 N 24V power interface definition PIN Signal Name 1 E 2 L 3 N 6.7 Cashdrawer interface signal definition 1) Electrical features ¾ Driving voltage: DC 24 V ¾ Drivin ...

  • Orient Technologies BTP-R880NP - page 24

    BTP-R880NP User’s Manual - 19 - 7 T roubleshooting In case of printer fault, consult th is section for solutions and advice. If you do not find a solution in this section, pl ease contact your local dealer for assistance. 7.1 Printer doesn’t work Problems Possible causes Solution Printer has no power supply Connect the printer power Printer pow ...

  • Orient Technologies BTP-R880NP - page 25

    BTP-R880NP User’s Manual - 20 - 8. Accessories 8.1 Spill proof cover 8.2 HERALD – kitchen alarm system 8.3 Power Supply CASE This cover is used to install the AC power adapter under the printer; so that the power adapter would become an internal part of the printer (the pow er adapter will be inside of the printer). 8.4 Wall Mounting The printe ...

  • Orient Technologies BTP-R880NP - page 26

    BTP-R880NP User’s Manual - 21 - 2) Insert the plastic plugs in the holes and make su re that the plugs are fully inside the holes and do not stick out. 3) Screw the two screws in the plastic plugs and keep10mm spac e between the screw head and the wall surface. 4) Regulate the paper near end sensor (Please refer to 3.4.1) ,)Mount, Mount the print ...

  • Orient Technologies BTP-R880NP - page 27

    BTP-R880NP User’s Manual - 22 - 8.5 Cable for PoweredUSB Connections ...

  • Orient Technologies BTP-R880NP - page 28

    BTP-R880NP User’s Manual - 23 - 9. Power Management The power management of BTP-R880NP has four operation modes: Ready , Active, Sleep, Off. 1. Printer will enter into Ready mode after pow ering on printer or completing printing job. 2. Printer will enter into Sleep mode if there is not any printing job for 5 minutes in Ready mode. 3. Printer wil ...

  • Orient Technologies BTP-R880NP - page 29

    BTP-R880NP User’s Manual - 24 - APPENDIX A: Configuration setting function Parameter setting (configuring) by Feed button 1) Hold the FEED button pressed while switching the printer on. 2) After the printer has printed t he configuration sheet, pr ess and hold the FEED bu tton to configure the printer . The main menu for the key- stroke setting p ...

  • Orient Technologies BTP-R880NP - page 30

    BTP-R880NP User’s Manual 25 P ARAMETER SETTING BY FEED BU TTON MAIN MENU Exit ->1 Print Self T est ->2 Configuratio n ->3 CONFIGURA TION Exit W ithout Save ->1 Exit W ith Save ->2 Communication ->3 B ack T o Las t Menu ->1 USB Interface ->2 USB MODE:API MODE Back T o Last Menu ->1 WinDriver Mode ->2 API Mode ->3 S ...

  • Orient Technologies BTP-R880NP - page 31

    BTP-R880NP User’s Manual 26 Print '?' ->3 Rx Buff Size ->4 RX BUFFER SIZE :4K Bytes Back T o Last Menu ->1 4k Bytes ->2 45 Bytes ->3 64K Bytes ->4 Mechanism & Hardware ->4 HARDWARE SETTINGS Back T o Last Menu ->1 Mark Sensor ->2 MARK SENSOR: Disable Back T o Last Menu ->1 Enable ->2 Disable ->3 Cu ...

  • Orient Technologies BTP-R880NP - page 32

    BTP-R880NP User’s Manual 27 82.5mm ->6 Left Margin ->4 LEFT MARGIN:7mm Back T o Last Menu ->1 0mm ->2 1mm ->3 3mm ->4 5mm ->5 7mm ->6 9mm ->7 Right Margin ->5 RIGHT MARGIN:9mm Back T o Last Menu ->1 0mm ->2 1mm ->3 3mm ->4 5mm ->5 7mm ->6 9mm ->7 CR Command ->6 CR COMMAND: Disable Back T o Las ...

  • Orient Technologies BTP-R880NP - page 33

    BTP-R880NP User’s Manual 28 55% ->3 50% ->4 45% ->5 40% ->6 35% ->7 30% ->8 Gray Scale Mode ->10 Gray Scale Mode:Mode3 Back T o Last Menu ->1 Mode 0 ->2 Mode 1 ->3 Mode 2 ->4 Mode 3 ->5 Mode 4 ->6 Mode 5 ->7 Mode 6 ->8 Mode 7 ->9 Paper Senso r Settings ->6 P APER NEAR END SETTINGS Back T o Last M ...

  • Orient Technologies BTP-R880NP - page 34

    BTP-R880NP User’s Manual 29 Select UDFONTB ->5 Beep settings ->9 Beep settings: Disabled Back T o Last Menu ->1 Enable Ex ternal Herald ->2 Enable Int ernal buzzer ->3 BEEP MODE Back T o Last Menu ->1 Mode 1 ->2 Mode 2 ->3 Mode 3 ->4 Mode 4 ->5 Mode 5 ->6 All Beep disa bled ->4 Set Printer Mode ->10 Printer ...

Manufacturer Orient Technologies Category Printer

Documents that we receive from a manufacturer of a Orient Technologies BTP-R880NP can be divided into several groups. They are, among others:
- Orient Technologies technical drawings
- BTP-R880NP manuals
- Orient Technologies product data sheets
- information booklets
- or energy labels Orient Technologies BTP-R880NP
All of them are important, but the most important information from the point of view of use of the device are in the user manual Orient Technologies BTP-R880NP.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Orient Technologies BTP-R880NP, service manual, brief instructions and user manuals Orient Technologies BTP-R880NP. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Orient Technologies BTP-R880NP.

Similar manuals

A complete manual for the device Orient Technologies BTP-R880NP, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Orient Technologies BTP-R880NP by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Orient Technologies BTP-R880NP.

A complete Orient Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Orient Technologies BTP-R880NP - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Orient Technologies BTP-R880NP, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Orient Technologies BTP-R880NP, that we can find in the current document
3. Tips how to use the basic functions of the device Orient Technologies BTP-R880NP - which should help us in our first steps of using Orient Technologies BTP-R880NP
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Orient Technologies BTP-R880NP
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Orient Technologies BTP-R880NP in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Orient Technologies BTP-R880NP?

Use the form below

If you did not solve your problem by using a manual Orient Technologies BTP-R880NP, ask a question using the form below. If a user had a similar problem with Orient Technologies BTP-R880NP it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)