English dropdown-ico

Manual ATEN CE-250

11 pages 0.25 mb
Download

Go to site of 11

Summary
  • ATEN CE-250 - page 1

    KVM Extender CE-250 User Manual Read this manual thoroughly and follow the installation procedures carefully to prevent any damage to the CE-250 and/or the devices it connects to. ©Copyright 2000-2003 Aten® International Co., Ltd. Manual Part No. PAPE-1221-100 Printed in Taiwan 01/2003 All brand names and trademarks are the registered property of ...

  • ATEN CE-250 - page 2

    Packing Checklist  1 x CE-250L KVM Extender Local Unit  1 x CE-250R KVM Extender Remote Unit  1 x CS Custom KVM Cable  2 x Power Adapters  1 x User Manual  1 x Quick Start Guide If anything is damaged or missing, contact your dealer . NOTE: This equipment has been tested and found to comply with li mits for a Class B digital devic ...

  • ATEN CE-250 - page 3

    The CE-250 features a custom ASIC to ensure the utmost in reliability and compatibility, and can also sense the distance to the system, and automatically adjust the gain to compensate. Setup is as easy as can be - simply connect the computer system box and local console to the Local CE-250 Module; run the Cat. 5 cable to the Remote CE-250 Module (u ...

  • ATEN CE-250 - page 4

    Computers The following equipment must be installed on each computer that is to be connected to the system:  With PS/2 Type Connectors:  A VGA, SVGA or Multi sync card.  A 6-pin mini-DIN mouse port.  A 6-pin mini-DIN keyboard port.  With AT Type Connectors:  A VGA, SVGA or Multi sync card.  A DB-9 (standard serial), mouse port ...

  • ATEN CE-250 - page 5

    1. Operating Mode Selection Switch Pressing this button cycles you through the operating mode choices:  Local: only the local console can control the system(s);  Auto: both consoles can control the system(s)). 2. LEDs The Local Unit has two LEDs to indicate the Operating Status of the Local and Remote units. 3. Mouse Port The local PS/2 mouse ...

  • ATEN CE-250 - page 6

    1. Monitor Port The HDB-15 Video connector of the KVM cable that connects to the computer's Video port plugs into this connector. 2. Keyboard Port The keyboard connector of the KVM cable that connects to the computer's Video port plugs into this connector. 3. Mouse Port The mouse connector of the KVM cabl e that connects to the computer&a ...

  • ATEN CE-250 - page 7

    1. LEDs The Remote Unit has two LEDs (Power and On Line) to indicate the Operating Status of the Local and Remote units. 2. Mouse Port The remote PS/2 mouse plugs into this connector. 3. Keyboard Port The remote PS/2 keyboard plugs into this connector. 4. Monitor Port The remote monitor plugs into this connector. 5. Remote I/O The Category 5 cable ...

  • ATEN CE-250 - page 8

    8. Plug the cables from the remote console devices (mouse, keyboard, monitor), into their ports on the Console side of the CE-250R. Each port is marked with an appropriate icon to indicate itself. 9. Plug the second power adapter (supplie d with this package) into an AC source; plug the adapter's power cable into the CE-250R's Power Jack. ...

  • ATEN CE-250 - page 9

    Operating Mode LED Local Auto Local Lights to indicate that the local console is active (the Remote LED is out). 1. Lights when the local console is active (the Remote LED is out). 2. Turns off when the remote console is active (the Remote LED turns on) 3. Flashes on and off alternately with the Remote LED when neither console is active. Remote The ...

  • ATEN CE-250 - page 10

    No Video Make sure that all cables are securely plugged into their sockets. TP Wiring Diagram TP Pin Assignments Pin Assignment 1 V OUT B 2 /V OUT B 3 V OUT G 4 V OUT R 5 /V OUT R 6 /V OUT G 7 /DO 8 DO Specifications Function CE-250L CE-250R Keyboard 2 x 6 pin mini-DIN female 6 pin mini-DIN female Mouse 2 x 6 pin mini-DIN female 6 pin mini-DIN fema ...

  • ATEN CE-250 - page 11

    Video Resolution 1280 x 1024; DDC; DDC2; DDC2B * Power Consumption AC 9V 2.7W (max.) Operating Temp. 5 to 40° C Storage Temp. -20 to -60° C Humidity 0 - 80% Housing Plastic Weight 300 g 220 g Dimensions (L x W x H) 130 x 100 x 35 mm 100 x 80 x 35 mm * DDC, DDC2, and DDC2B support is for the Local monitor only. Limited Warranty IN NO EVENT SHALL T ...

Manufacturer ATEN Category KVM Extender

Documents that we receive from a manufacturer of a ATEN CE-250 can be divided into several groups. They are, among others:
- ATEN technical drawings
- CE-250 manuals
- ATEN product data sheets
- information booklets
- or energy labels ATEN CE-250
All of them are important, but the most important information from the point of view of use of the device are in the user manual ATEN CE-250.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals ATEN CE-250, service manual, brief instructions and user manuals ATEN CE-250. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product ATEN CE-250.

Similar manuals

A complete manual for the device ATEN CE-250, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use ATEN CE-250 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of ATEN CE-250.

A complete ATEN manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual ATEN CE-250 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the ATEN CE-250, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the ATEN CE-250, that we can find in the current document
3. Tips how to use the basic functions of the device ATEN CE-250 - which should help us in our first steps of using ATEN CE-250
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with ATEN CE-250
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of ATEN CE-250 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning ATEN CE-250?

Use the form below

If you did not solve your problem by using a manual ATEN CE-250, ask a question using the form below. If a user had a similar problem with ATEN CE-250 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)