English dropdown-ico

Manual Harmar Mobility CPL1200

22 pages 2.27 mb
Download

Go to site of 22

Summary
  • Harmar Mobility CPL1200 - page 1

    This manual has been provided to assist you with lift installation and operation. For further assistance please contact your authorized Harmar dealer or Harmar’s Technical Service department. Tel: 866-378-6648 Fax: 816-537-0641  Commercial  Platform  Lift CPL400  CPL600  CPL800  CPL1000 CPL1200 CPL1400 HIGHLANDER ...

  • Harmar Mobility CPL1200 - page 2

    Table of Contents Installing the lift Using the Manual 2 When You Receive the Lift 3 Specifications 3 Safety 3 Code Requirements 4 Site Requirements 4 Required Tools 4 Required Materials 4 Preparing to Install the Lift 5 Controller Harness Connections 5 Installing the platform 6 Installing the outer guard panel 7 Installing the fixed ramp 7 Install ...

  • Harmar Mobility CPL1200 - page 3

    When You Receive the Lift • Check the lift for shipping damage. If you see any dam age contact the freight carrier to file a da mage claim. • Verify the products match that described on the packing list attached to the exterior packaging. • Verify the contents of the package match that shown below to the right. Specifications Payload Capacity ...

  • Harmar Mobility CPL1200 - page 4

    Code Requirements Your lift has been designed to meet ASME A18.1 section 2 and CSA B44/ASME A17.5, with the addition of certain options. Code requirements for Ve rtical Platform lifts vary depending on location. It is the installers responsibility to contact their local code enforcement office and d etermine all of the regulations they are subject ...

  • Harmar Mobility CPL1200 - page 5

    Preparing to Install the Lift Final Site Inspection Verify the surface the lift will mount to is smooth and level. This surface m ust be made from 3,500 psi reinforced concrete with a minimum thickness of 4”. Verify that there is enough space for the lifts foot print. Be su re to include space neccesary for platform. Caution: Verify that the runn ...

  • Harmar Mobility CPL1200 - page 6

    Installing the Platform Step 1 The mounting bolts, nuts and spacers that secure the platform to the lift carriage are packaged in the small parts box. Begin by locating these pieces and setting aside. Step 2 Position the platform by aligning the support legs with the carriage flanges that protrude from the front cover. Step 3 Align the four mountin ...

  • Harmar Mobility CPL1200 - page 7

    Installing the Outer Guard Panels Step 1 Remove the hexbolts on the corners of the platform. Insert the guard panel posts into the pockets in the platform. The smooth side of the guard panels should face in towards the center of the platform. If you have a 90 degree exit platform, install the end guard panel using the provided bracket and bolt to i ...

  • Harmar Mobility CPL1200 - page 8

    Installing Auto-folding Ramp (optional) Step 1 Install the ramp roller guide on the side of the lift tower using the screws already installed in the panels. Step 2 Attach the two ramp pivot tabs to the lower landing sides of the platform. Reinsert the hex bolts, one of which will go through the guard panel post, and tighten. Step 3 Attach the ramp ...

  • Harmar Mobility CPL1200 - page 9

    Anchoring the Lift Anchors Harmar recommends securing the lift using the concrete anchors provided. If you purchase you own floor anchors they must be 3/8” minimum of sufficient length. All four floor anchors must be installed correctly in accordance to their instructions. Step 1 • Position the lift in its final location. • Verify that it is ...

  • Harmar Mobility CPL1200 - page 10

    Setting the Limit Switches Your lift is equipped with upper and lower limit switches. The vertical location of these switches may be adjusted to fit your application. Typically the upper lim it swit ch will need to be adjusted so the platform will stop level with the upper landing. The lower limit will typically not need adjusting. Step 1 Verify th ...

  • Harmar Mobility CPL1200 - page 11

    Verifying Operation of the Lift Caution: Complete the following section before training the customer to use the lift. Step 1 Run the lift up and down for 5 complete cycles. Hold the direction button down and allow the limit switches to stop the lift. At the top, verify that the platform stops level with the upper landing. At th e bottom, verify the ...

  • Harmar Mobility CPL1200 - page 12

    Manual Override Your lift is equipped with a manual handcrank, to be used in the case of a power failure. Step 1 Before using the manual handcrank verify that it’s use is required. Check that the emergency stop switch is pulled out. Check that the electrical cord is connected to the supply. Also check that the building s circuit breaker has not t ...

  • Harmar Mobility CPL1200 - page 13

    Top Landing Gate (optional) The optional top landing gate is provided with a combination mechanical lock and electric contact (interlock) . The interlock: • Prevents the lift from running if the gate is not closed. • Prevents the gate from being opened if the platform is not at the top landing. • Unlocks when the lift is on the upper limit sw ...

  • Harmar Mobility CPL1200 - page 14

    EMI and Flush Strike Interlocks (optional) The optional EMI or Flush Strike Interlocks are provided with a combination mechanical lock and electric contact. They are to be used with existing doors. The interlock: • Prevents the lift from running if the door is not closed. • Prevents the door from being opened if the platform is not at the landi ...

  • Harmar Mobility CPL1200 - page 15

    Platform Gate (optional) The optional platform gate is provided with a combination mechanical lock and electric contact (interlock) . The interlock: • Prevents the lift from running if the gate is not closed. • Prevents the gate from being opened if the platform is not at the bottom landing. • Unlocks when the lift is on the lower limit switc ...

  • Harmar Mobility CPL1200 - page 16

    Fascia Panel (optional) A fascia panel provides a smooth surface for th e platform edge to run against to prevent any shear or obstruction hazards and must be utilized. A running clearance of no more than 3/4” and no less than 3/8” must be maintained between the edge of the platform and the fascia panel. 16 ...

  • Harmar Mobility CPL1200 - page 17

    Commercial Platform Lift - Owners Section L Read the manual thoroughly before operating the lift. 17 ...

  • Harmar Mobility CPL1200 - page 18

    Congratulations on the purchase of your Harmar Vertical Platform Lift. This lift has been engineered to provide trouble free se rvice for many, many years. Please read this manual completely before operating your lift. Safety • Do not exceed the maximum payload capacity of 750 lbs. • Do not ride on the lift until it is anchored in place. • Th ...

  • Harmar Mobility CPL1200 - page 19

    Controls Emergency Stop In an emergency push this red button to stop the lift. Turn the button clockwise to run. Up Controls upward movement of lift platform. To move platform up, depress and hold the upper half of the rocker switch. To cease movement, release switch. Down Controls downward movement of lift platform. To move platform down, depress ...

  • Harmar Mobility CPL1200 - page 20

    Operating the Lift Step 1 - Up Drive onto and stop in the middle of the platform. Apply the brakes of your chair or scooter. Step 2 Verify that the emergency stop button is not activated by giving it a quick turn clockwies. Step 3 Press and hold the UP rocker. The lift will move in the up direction and stop when it reaches the upper landing. Warnin ...

  • Harmar Mobility CPL1200 - page 21

    Step 1 - Down Drive onto and stop in the middle of the platform. Apply the brakes of your chair or scooter. Step 2 Verify that the emergency stop button is not activated by giving it a quick turn clockwise. Step 3 Press and hold the DOWN rocker. The lift will move in the down direction and stop when it reaches the lower landing. Warning: Always ver ...

  • Harmar Mobility CPL1200 - page 22

    Please fill out all fields and return within 10 days of product purchase. Toll-Free Fax: 1-866-234-5680, Online: www.harmar.com or Mail to: Harmar Summit, LLC., A ttn: Warranty Department 2075 47th Street, Sarasota, FL 34234 _____ Harmar warrants to the original purchas er of a Highlande r Commercial ve rtical platform lift manufactured by u s to b ...

Manufacturer Harmar Mobility Category Personal Lift

Documents that we receive from a manufacturer of a Harmar Mobility CPL1200 can be divided into several groups. They are, among others:
- Harmar Mobility technical drawings
- CPL1200 manuals
- Harmar Mobility product data sheets
- information booklets
- or energy labels Harmar Mobility CPL1200
All of them are important, but the most important information from the point of view of use of the device are in the user manual Harmar Mobility CPL1200.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Harmar Mobility CPL1200, service manual, brief instructions and user manuals Harmar Mobility CPL1200. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Harmar Mobility CPL1200.

Similar manuals

A complete manual for the device Harmar Mobility CPL1200, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Harmar Mobility CPL1200 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Harmar Mobility CPL1200.

A complete Harmar Mobility manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Harmar Mobility CPL1200 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Harmar Mobility CPL1200, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Harmar Mobility CPL1200, that we can find in the current document
3. Tips how to use the basic functions of the device Harmar Mobility CPL1200 - which should help us in our first steps of using Harmar Mobility CPL1200
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Harmar Mobility CPL1200
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Harmar Mobility CPL1200 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Harmar Mobility CPL1200?

Use the form below

If you did not solve your problem by using a manual Harmar Mobility CPL1200, ask a question using the form below. If a user had a similar problem with Harmar Mobility CPL1200 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)