English dropdown-ico

Manual Pelco EH4718L/PSA

12 pages 0.24 mb
Download

Go to site of 12

Summary
  • Pelco EH4718L/PSA - page 1

    EH4718L/WPSA and EH4718L/PSA Envir onmental Enclosur es Installation/ Operation Manual C1415M-PSA (12/97) Pelco • 3500 W. Pelco Way, Clovis • CA 93612-5699 USA • www.pelco.com In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150 International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120 ® ...

  • Pelco EH4718L/PSA - page 2

    12 Pelco Manual C1415M-PSA (12/97) ii CONTENTS Section Page 1.0 GENERAL .................................................................................................. 1 1.1 IMPORT ANT SAFEGUARDS AND WARNINGS ............................... 1 2.0 DESCRIPTION ........................................................................................ ...

  • Pelco EH4718L/PSA - page 3

    Pelco Manual C1415M-PSA (12/97) 1 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Installation and servicing should only be done by Qualifie ...

  • Pelco EH4718L/PSA - page 4

    2 Pelco Manual C1415M-PSA (12/97) 2.0 DESCRIPTION The EH4718L/WPSA and EH4718L/PSA environmental enclosures are constructed of aluminum. They are installed by attaching the bottom of the enclosure to the tilt shaft of an PT780-24P/PPPSA pan/tilt. 2.1 MODELS EH4718L/WPSA Environmental enclosure with rear opening lid. Lid has gas spring to hold it op ...

  • Pelco EH4718L/PSA - page 5

    Pelco Manual C1415M-PSA (12/97) 3 3.0 INST ALLA TION 1. Unlatch and raise the enclosure lid. The gas spring will hold the lid in place when it is fully opened. 2. Remove the parts tied to the camera sled 3. Remove the elevator from the camera sled. 4. Mount the camera to the elevator with the 1/4-20 Phillips-head screws that are provided in the par ...

  • Pelco EH4718L/PSA - page 6

    4 Pelco Manual C1415M-PSA (12/97) Figure 1. Support Bracket Installation ...

  • Pelco EH4718L/PSA - page 7

    Pelco Manual C1415M-PSA (12/97) 5 4.0 WINDOW WIPER ADJUSTMENTS 1. Open the enclosure lid. 2. Refer to Figure 2 and set either of the following two options: a. The time between wiper strokes can be adjusted between 3 and 10 sec- onds by rotating the potentiometer R8. T urn the adjustment clockwise to increase the time. The potentiometer only makes o ...

  • Pelco EH4718L/PSA - page 8

    6 Pelco Manual C1415M-PSA (12/97) 5.0 OPERA TION The fan turns on at 1 10 ° F (43 ° C) and turns off at 88 ° F (31 ° C). ...

  • Pelco EH4718L/PSA - page 9

    Pelco Manual C1415M-PSA (12/97) 7 6.0 MAINTENANCE Clean the window with a mild nonabrasive detergent in water and a soft cloth to maintain picture clarity . ...

  • Pelco EH4718L/PSA - page 10

    8 Pelco Manual C1415M-PSA (12/97) 7.0 WIRING DIAGRAM Figure 3. EH4718L/WPSA and EH4718L/PSA Wiring Diagram ...

  • Pelco EH4718L/PSA - page 11

    Pelco Manual C1415M-PSA (12/97) 9 8.0 SPECIFICA TIONS ELECTRICAL Input Voltage: 24, 120 or 230 VAC, 50/60 Hz Electrical Connections: 9-pin round lens control connector Two wires for camera power BNC for video BNC for camera synchronization 26-pin RediLINK ™ D-type connector (links enclosure to pan/tilt) MECHANICAL Construction: Aluminum Finish: G ...

  • Pelco EH4718L/PSA - page 12

    10 Pelco Manual C1415M-PSA (12/97) 9.0 WARRANTY AND RETURN INFORMA TION Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco. © Copyright 1997, Pelco. All rights reserved. WARRANTY Pelco will repair or replace, without charge, any merchandise proved defe ...

Manufacturer Pelco Category Security Camera

Documents that we receive from a manufacturer of a Pelco EH4718L/PSA can be divided into several groups. They are, among others:
- Pelco technical drawings
- EH4718L/PSA manuals
- Pelco product data sheets
- information booklets
- or energy labels Pelco EH4718L/PSA
All of them are important, but the most important information from the point of view of use of the device are in the user manual Pelco EH4718L/PSA.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Pelco EH4718L/PSA, service manual, brief instructions and user manuals Pelco EH4718L/PSA. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Pelco EH4718L/PSA.

Similar manuals

A complete manual for the device Pelco EH4718L/PSA, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Pelco EH4718L/PSA by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Pelco EH4718L/PSA.

A complete Pelco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Pelco EH4718L/PSA - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Pelco EH4718L/PSA, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Pelco EH4718L/PSA, that we can find in the current document
3. Tips how to use the basic functions of the device Pelco EH4718L/PSA - which should help us in our first steps of using Pelco EH4718L/PSA
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Pelco EH4718L/PSA
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Pelco EH4718L/PSA in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Pelco EH4718L/PSA?

Use the form below

If you did not solve your problem by using a manual Pelco EH4718L/PSA, ask a question using the form below. If a user had a similar problem with Pelco EH4718L/PSA it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)