-
JVC HR-VP830U - page 1
H R-VP830U VIDEO CASSETTE RECORDER INSTRUCTIONS PU30425-1820 For Customer Use: Enter below the Serial No. which is located on the rear of cabinet. Retain this information for future reference. Model No. HR-VP830U/U(C) Serial No. w Channel Changer Cable I L L U M I G U I D E C . M E M O R Y S K I P S E A R C H POWER ENTER PLAY ...
-
JVC HR-VP830U - page 2
2 Dear Customer , Thank you for purchasing the JVC VHS video cassette recorder . Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new VCR. CAUTIONS W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION: This video cassette recorder sh ...
-
JVC HR-VP830U - page 3
3 IMPOR T ANT PRODUCT SAFETY INSTRUCTIONS Electrical ener gy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety . In order not to defeat the built-in safeguards, observe the following basic rules for its instal ...
-
JVC HR-VP830U - page 4
4 SERVICING 1. Servicing If your product is not operating correctly or exhibits a marked change in performance and you are unable to restore normal operation by following the detailed procedure in its operating instructions, do not attempt to service it yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Ref ...
-
JVC HR-VP830U - page 5
5 CONTENTS Recording ................................................... 41 Record One Program While W atching Another .................................................... 41 Display Elapsed Recording T ime .............................. 41 Stereo And SAP (Second Audio Program) ................. 42 T o Record SAP Programs .......................... ...
-
JVC HR-VP830U - page 6
6 CH3 OFF CH4 RF OUT INST ALLING YOUR NEW VCR CHECK CONTENTS 1 Make sure the package contains all of the accessories listed in “SPECIFICA TIONS” ( Z pg. 70). SITUA TE VCR 2 Place the VCR on a stable, horizontal surface. CONNECT VCR TO TV 3 The connection method you use depends on the type of TV you have. RF Connection ● T o Connect T o A TV W ...
-
JVC HR-VP830U - page 7
7 INITIAL SETTINGS Dual Quick Set Auto Clock Set/Auto T uner Set Dual Quick Set sets the clock and tuner channels automatically when power is first connected to the VCR. The antenna cable must be connected for dual quick set. The time and date can be set automatically from clock setting data that is transmitted by one of the regular TV broadcast ch ...
-
JVC HR-VP830U - page 8
8 INITIAL SETTINGS (cont.) Language This VCR offers you the choice to view on-screen messages in English, Spanish or French (not including messages superimposed on the TV picture). Select the desired language using this procedure. The default setting is "ENGLISH". TURN ON THE VCR 1 Press POWER . ACCESS ON-SCREEN MENU 2 Press MENU as many ...
-
JVC HR-VP830U - page 9
9 Clock 12 45 3 6 8 0 7 9 MENU OK TIME SCAN POWER CH Perform clock setting only if the clock has not been set correctly by Dual Quick Set. Access the Override Auto Clock Set screen to choose the Auto, Semi-Auto or Manual clock setting procedure. Each procedure starts from step 5. *Auto need only be selected if Semi-Auto or Manual had previously bee ...
-
JVC HR-VP830U - page 10
10 INITIAL SETTINGS (cont.) SELECT MODE 5 At the Override Auto Clock Set screen, place the arrow next to “SEMI- AUT O CLOCK SET” by pressing CH ▲▼ or TIME SCAN 5 ∞ , then press OK . ACCESS SELECT SCREENS 6 At the Semi-Auto Clock Set screen, place the arrow next to the desired mode by pressing CH ▲▼ or TIME SCAN 5 ∞ , then press OK . ...
-
JVC HR-VP830U - page 11
11 SELECT D.S.T . MODE 9 Y ou have three choices: a– Select “AUTO” and the adjustment to your VCR’ s clock will be made according to the incoming signal from the host channel. b– Select “ON” and the adjustment will be made based on the clock itself. c– Select “OFF” if Daylight Saving T ime doesn’t apply to you. Place the arrow ...
-
JVC HR-VP830U - page 12
12 T uner Set Receivable Channels TURN ON THE VCR 1 Press POWER . ACCESS MAIN MENU SCREEN 2 Press MENU as many times as necessary . ACCESS TUNER SET SCREEN 3 Place the arrow next to "TUNER SET" by pressing CH 5 ∞ or TIME SCAN 5 ∞ , then press OK . ACCESS BAND SCREEN 4 Place the arrow next to "BAND" by pressing CH 5 ∞ or TI ...
-
JVC HR-VP830U - page 13
13 PERFORM AUTO CHANNEL SET 6 Place the arrow next to "AUT O CHANNEL SET" by pressing CH 5 ∞ or TIME SCAN 5 ∞ , then press OK . Receivable channels in your area are automatically assigned to the CH 5 ∞ buttons, and non-receivable channels are skipped. NOTES: ● At the end of Auto Channel Set, “SCAN COM- PLETED” appears on scree ...
-
JVC HR-VP830U - page 14
14 Add Or Delete A Channel ACCESS TUNER SET SCREEN 1 Access by performing steps 2 and 3 of the T uner procedure on page 12. ● T o add a channel, go to step 2 . ● T o delete a channel, skip to step 4 . ACCESS AFC SCREEN 2 Place the arrow next to "AFC" by pressing CH 5 ∞ or TIME SCAN 5 ∞ , then press OK . MAKE SELECTION 3 Place the ...
-
JVC HR-VP830U - page 15
15 This procedure is required if you receive your TV channels through a cable box (descrambler). The Controller allows the VCR to automatically switch the cable box channel during timer -recording. The Controller is effective for recording shows that have been programmed using VCR Plus+ ( Z pg. 44) or On-Screen T imer Programming ( Z pg. 46). Cable ...
-
JVC HR-VP830U - page 16
16 Set Cable Box Output Channel TURN ON THE VCR 1 Press POWER . ACCESS MAIN MENU SCREEN 2 Press MENU as many times as necessary . ACCESS CUSTOM SET SCREEN 3 Press CH 5 ∞ or TIME SCAN 5 ∞ to place the arrow next to “CUST OM SET”, then press OK . ACCESS VCR PLUS+ SET -UP SCREEN 4 Press CH 5 ∞ or TIME SCAN 5 ∞ to place the arrow next to ? ...
-
JVC HR-VP830U - page 17
17 SELECT CABLE BOX OUTPUT CHANNEL 6 Y our selection depends on how your cable box is connected to your VCR. If your cable box is connected to your VCR using an RF connection . . . . . . press CH 5 ∞ or TIME SCAN 5 ∞ to place the arrow next to the channel number representing the cable box’ s output (2–6). If your cable box is connected to y ...
-
JVC HR-VP830U - page 18
18 RETURN TO NORMAL SCREEN 4 Press MENU as many times as necessary . Y ou can now set up the VCR Plus+ feature ( Z pg. 19). CABLE BOX BRAND LIST BRAND CODE ARCHER 49, 52, 53, 54 CABLEVIEW 49, 53 CITIZEN 49, 53 CURTIS 9, 10, 62, 63 DIAMOND 52, 53, 54 EAGLE 30, 31, 32, 33, 34, 35, 36, 37 EASTERN 51 GC BRAND 49, 53 GEMINI 8, 56 GENERAL ELECTRIC 67 GEN ...
-
JVC HR-VP830U - page 19
19 The VCR Plus+ timer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function. Simply key in the PlusCode number for the TV program you wish to record (found in most TV listings) and the VCR’ s timer is automatically programmed. Depending on the TV or cable stations that you ...
-
JVC HR-VP830U - page 20
20 ACCESS CUSTOM SET SCREEN 3 Press CH 5 ∞ or TIME SCAN 5 ∞ to place the arrow next to “CUST OM SET”, then press OK . ACCESS VCR PLUS+ SET -UP SCREEN 4 Press CH 5 ∞ or TIME SCAN 5 ∞ to place the arrow next to “VCR PLUS+ SET -UP”, then press OK . ACCESS GUIDE CHANNEL SET SCREEN 5 Press CH 5 ∞ or TIME SCAN 5 ∞ to place the arrow n ...
-
JVC HR-VP830U - page 21
21 INPUT RECEIVING CHANNEL NUMBER 7 Press CH 5 ∞ , TIME SCAN 5 ∞ or the appropriate NUMBER keys to input the number of the channel on which the Guide Channel’ s broadcasts are received. Then press OK . ● If there is more than one mismatch, repeat steps 6 and 7 for each instance. RETURN TO VCR PLUS+ SET -UP SCREEN 8 Press MENU . CHECK INPUT ...
-
JVC HR-VP830U - page 22
22 CABLE BOX DSS receiver Controller (suggested locations) DSS receiver Controller T ransmitter Connected to ANT . IN Connected to VIDEO/ AUDIO IN Y our VCR Y our VCR The following procedure is required if you receive satellite channels through a DSS (Digital Satellite System) receiver and you want your VCR to change to receiver's channels ...
-
JVC HR-VP830U - page 23
23 Set DSS Receiver Output Channel TURN ON THE VCR 1 Press POWER . ACCESS MAIN MENU SCREEN 2 Press MENU as many times as necessary . ACCESS CUSTOM SET SCREEN 3 Press CH 5 ∞ or TIME SCAN 5 ∞ to place the arrow next to “CUST OM SET”, then press OK . ACCESS DSS RECEIVER OUTPUT SCREEN 4 Press CH 5 ∞ or TIME SCAN 5 ∞ to place the arrow next ...
-
JVC HR-VP830U - page 24
24 INITIAL SETTINGS (cont.) Set DSS Receiver Brand TURN ON DSS RECEIVER 1 Select a channel other than channel 205 on your DSS receiver . ACCESS DSS RECEIVER BRAND SET SCREEN 2 At the Custom Set screen, press CH 5 ∞ or TIME SCAN 5 ∞ to place the arrow next to “DSS RECEIVER BRAND SET”, then press OK. ENTER DSS RECEIVER BRAND 3 Press the appro ...
-
JVC HR-VP830U - page 25
25 SIMPLE PLA YBACK AND RECORDING Simple Playback LOAD A CASSETTE 1 Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR. Don’ t apply too much pressure when inserting. ● The VCR’ s power comes on automatically . ● The counter is automatically reset to &quo ...
-
JVC HR-VP830U - page 26
26 8 •• • • •• •• • • • Simple Recording LOAD A CASSETTE 1 Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette. SELECT RECORDING CHANNEL 2 Press CH 5 ∞ . Or press the appropriate NUMBER keys, then press ENTER . (The channel changes after a few seconds whether you ...
-
JVC HR-VP830U - page 27
27 PLA YBACK AND RECORDING FEA TURES Playback Still Picture/Frame-By- Frame Playback P AUSE DURING PLA YBACK 1 Press P AUSE . If there is vertical jitter , use the CH 5 or ∞ button to correct the picture. ● During still picture, the sound from the previous 3 seconds (approx.) will be played back repeatedly (provided there was at least 6 seconds ...
-
JVC HR-VP830U - page 28
28 Manual T racking Once playback begins, the VCR’ s automatic tracking function is engaged. If noise appears in the picture, you can override this and make the adjustment manually . ENGAGE MANUAL TRACKING MODE 1 During playback, press the CH 5 ∞ buttons on the VCR's front panel simultaneously to cancel the automatic tracking mode and enab ...
-
JVC HR-VP830U - page 29
29 Select The Soundtrack Y our VCR can record two soundtracks simultaneously (Normal and Hi-Fi) and play back the selected one, or both together . ACCESS MAIN MENU SCREEN 1 Press MENU during playback or when VCR is in stop mode. ● If the VCR Plus+ screen appears press MENU again. ACCESS FUNCTION SET SCREEN 2 Place the arrow next to "FUNCTION ...
-
JVC HR-VP830U - page 30
30 PLA YBACK AND RECORDING FEA TURES (cont.) Superimpose This function, switchable between ON and OFF , determines whether or not operational indicators will appear on screen. ACCESS MAIN MENU SCREEN 1 Press MENU as many times as necessary . ACCESS FUNCTION SET SCREEN 2 Place the arrow next to "FUNCTION SET" by pressing CH 5 ∞ or TIME S ...
-
JVC HR-VP830U - page 31
31 Index Search This function seeks out index codes that are placed on the tape at recording start. ST AR T SEARCH 1 While the tape is stopped, press TIME SCAN ™ or £ . ACCESS DIST ANT CODE 2 T o access a recording 2–9 index codes away , press TIME SCAN ™ or £ repeatedly until the correct number is displayed on screen (only if SUPERIMPOSE i ...
-
JVC HR-VP830U - page 32
32 PLA YBACK AND RECORDING FEA TURES (cont.) Instant ReView At the press of a button, you can power up your VCR, rewind the tape and begin viewing the most recent timer -recorded program. ACTIV A TE INST ANT REVIEW 1 After ensuring that the VCR is off and the T imer mode is disengaged, press REVIEW . ● The power comes on and the VCR searches for ...
-
JVC HR-VP830U - page 33
33 T ape Position Indicator The T ape position indicator appears on screen when, from the stop mode, you press FF , REW , or use the TIME SCAN SHUTTLE ring, or perform an Index Sear ch or Instant ReV iew . The position of " " in relation to "B" (Beginning) or "E" (End) shows you where you are on the tape. NOTE: "S ...
-
JVC HR-VP830U - page 34
34 PLA YBACK AND RECORDING FEA TURES (cont.) ACCESS FUNCTION SET SCREEN 4 Press CH 5 ∞ or TIME SCAN 5 ∞ to place the arrow next to “FUNCTION SET”, then press OK . ACCESS SPECIAL FUNCTION SCREEN 5 Press CH 5 ∞ or TIME SCAN 5 ∞ to place the arrow next to “SPECIAL FUNCTION”, then press OK . ENABLE A V COMPU LINK PLA YBACK 6 Press CH 5 ...
-
JVC HR-VP830U - page 35
35 TimeScan Y our VCR is equipped with the T imeScan function. T imeScan allows noise free pictures to be displayed on your TV screen in the forward and reverse search modes. Audio will be played back at normal speed during any of the T imeScan modes ( Z pg. 36). T imeScan allows you to view a program in search mode while listening to the audio. NO ...
-
JVC HR-VP830U - page 36
36 PLA YBACK AND RECORDING FEA TURES (cont.) ● The VCR's TimeScan indicator lights during T imeScan. ● The speed is shown in the upper right corner of the TV screen for approx. 5 seconds. ● The T imeScan search speed is the same for SP and EP recordings. ● T o resume normal playback, press PLA Y . ● When using the VCR's TIME SCA ...
-
JVC HR-VP830U - page 37
37 12 45 3 6 8 0 7 9 CH TimeScan Audio The audio output can be set ON/OFF during T imeScan. Select ON/OFF as required. *The default setting is "ON". 8 •• • • •• •• • • • CH OK OK TIME SCAN MENU ACCESS MAIN MENU SCREEN 1 Press MENU as many times as necessary . ACCESS FUNCTION SET SCREEN 2 Place the arrow next to " ...
-
JVC HR-VP830U - page 38
38 PLA YBACK AND RECORDING FEA TURES (cont.) Active V ideo Calibration Y our VCR is equipped with the Active Video Calibration feature, which checks the condition of the tape in use during recording and playback, and compensates to provide the highest-possible recording and playback pictures. *The default setting for both recording and playback is ...
-
JVC HR-VP830U - page 39
39 Recording Perform steps 1 – 3 on page 26 ("Simple Recording") before continuing. A TTENTION: n As calibration takes place before recording actually starts, there is a delay of about 7 seconds after REC and PLA Y on the remote, or REC on the VCR's front panel, are pressed. T o make sure you record the desired scene or program com ...
-
JVC HR-VP830U - page 40
40 PLA YBACK AND RECORDING FEA TURES (cont.) Playback The VCR assesses the quality of the tape once you initiate playback. Before beginning, perform steps 1 and 2 on page 25. ST AR T PLA YBACK 1 Press PLAY . ● The VCR adjusts the playback picture quality based on the quality of the tape in use. NOTES: ● When using rental tapes, or tapes recorde ...
-
JVC HR-VP830U - page 41
41 Record One Pr ogram While W atching Another ENGAGE TV MODE 1 During recording... ● Press TV/VIDEO . The VCR's VIDEO indicator goes out. (If you are using the RF connection ( Z pg. 6). to view the output from your VCR, the TV broadcast being recorded disappears.) ● If you are using the A V connection ( Z pg. 6), to view the output from y ...
-
JVC HR-VP830U - page 42
42 PLA YBACK AND RECORDING FEA TURES (cont.) Stereo And SAP (Second Audio Pr ogram) Y our VCR’s built-in MTS decoder enables reception of Multi- channel TV Sound broadcasts. ● The ST indicator on the front display panel lights during stereo broadcast reception, and SAP lights during SAP program reception. ● Both indicators light when a stereo ...
-
JVC HR-VP830U - page 43
43 Hi-Fi Audio Recording Level Contr ol Y our VCR allows manual adjustment of the Hi-Fi audio recording level. Although the preset audio recording level is satisfactory for normal recording, if the sound you are going to record is too loud or too low , adjust the audio recording level while referring to the VCR's audio level meters. TURN ON TH ...
-
JVC HR-VP830U - page 44
44 VCR Plus+ Timer Pr ogramming Before VCR Plus+ T imer programming, see "VCR Plus+ Setup" on page 19. T imer recording allows you to program the VCR to automatically record a program which will be broadcast at some future time. The timer record function can be programmed using VCR Plus+ or On-Screen T imer Programming. ( Z pg. 46) During ...
-
JVC HR-VP830U - page 45
45 CHECK INPUT DA T A 4 Press OK and the Program screen appears. The PlusCode number you entered appears in the Program screen. Check to make sure it’ s accurate. ● T o timer -record daily or weekly serials, press DAILY ( NUMBER “8”) or WEEKL Y ( NUMBER “9”). “DAIL Y” or “WEEKL Y” appears on the Program screen. ● For weekly re ...
-
JVC HR-VP830U - page 46
46 TIMER RECORDING (cont.) Y ou can directly program the VCR’ s timer to record up to 8 shows, as far as a year in advance. Remember , the clock must be set before you can program the timer ( Z pg. 7 or 9). Y ou can also use the optional Illumi-Guide feature, where the relevant buttons on the remote control light to tell you which button to press ...
-
JVC HR-VP830U - page 47
47 12 45 3 6 8 0 7 9 CH MENU OK NUMBER NUMBER "9" NUMBER "8" TIMER SET PROGRAM INFORMA TION 5 Press the appropriate NUMBER keys to set the date, start/stop time and channel number . Press CH 5 ∞ or TIME SCAN 5 ∞ to set AM/PM and tape speed. Press OK after AM/PM, channel number and tape speed settings. The next setting that c ...
-
JVC HR-VP830U - page 48
48 TIMER RECORDING (cont.) DISENGAGE TIMER 1 Press TIMER , then press POWER . ACCESS MAIN MENU SCREEN 2 Press MENU as many times as necessary . ACCESS PROGRAM SET SCREEN 3 Press CH 5 ∞ or TIME SCAN 5 ∞ to place the arrow next to "PROGRAM SET", then press OK . CHECK PROGRAM INFOR- MA TION 4 Press CH 5 ∞ or TIME SCAN 5 ∞ to check th ...
-
JVC HR-VP830U - page 49
49 ACCESS MAIN MENU SCREEN 1 Press MENU as many times as necessary . ACCESS FUNCTION SET SCREEN 2 Place the arrow next to "FUNCTION SET" by pressing CH 5 ∞ or TIME SCAN 5 ∞ , then press OK . ACCESS AUTO TIMER SCREEN 3 Place the arrow next to "AUT O TIMER" by pressing CH 5 ∞ or TIME SCAN 5 ∞ , then press OK . Now skip to ...
-
JVC HR-VP830U - page 50
50 Instant Timer Recording (ITR) This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the VCR off after recording is finished. ST AR T RECORDING 1 Press REC on the front panel. ENGAGE ITR MODE 2 Press REC again. ITR blinks and 0:30 appears on the front display panel. SET RECORDING DURA TION 3 ...
-
JVC HR-VP830U - page 51
51 Edit T o Or Fr om Another VCR Y ou can use your VCR as the player or the recorder . MAKE CONNECTIONS 1 Connect an AV cable between the player’ s VIDEO OUT and AUDIO OUT connectors and the recorder’ s VIDEO IN and AUDIO IN connectors. ● When using your VCR as the recorder and a monaural VCR as the player , connect the player’ s AUDIO OUT ...
-
JVC HR-VP830U - page 52
52 12 45 3 6 8 0 7 9 8 •• • • •• •• • • • EDITING (cont.) Edit Fr om A Camcorder Y ou can use a camcorder as the player and your VCR as the recorder . MAKE CONNECTIONS 1 Connect an AV cable between the camcorder’ s VIDEO OUT and AUDIO OUT connectors and your VCR’ s VIDEO IN and AUDIO IN connectors. ● When a Master Edit C ...
-
JVC HR-VP830U - page 53
53 RETURN TO FUNCTION SET SCREEN 8 Press MENU . ACCESS AUX INPUT SCREEN 9 Press CH 5 ∞ or TIME SCAN 5 ∞ to place the arrow next to “AUX INPUT”, then press OK . SELECT INPUT 10 If you are connecting the A V cable to the AV connectors on the front of the VCR , place the arrow next to "FRONT" by pressing CH 5 ∞ or TIME SCAN 5 ∞ . ...
-
JVC HR-VP830U - page 54
54 Assemble Editing Assemble Editing adds one recorded scene to another in succession. T o use your VCR as the recorder ... LOAD CASSETTES 1 Insert the original cassette in the player , and the recording cassette in the recorder . SET T APE SPEED 2 Set to "SP" or "EP" by pressing the SP/EP button. ENGAGE RECORD- ST ANDBY MODE 3 ...
-
JVC HR-VP830U - page 55
55 8 •• • • •• •• • • • Audio dubbing replaces the normal audio sound of a previously recorded tape with a new soundtrack. Use your VCR as the recorder . Audio Dubbing MAKE CONNECTIONS 1 Connect an audio component to the AUDIO IN L + R connectors on the VCR's front panel. *When connect- ing monaural equipment, use only th ...
-
JVC HR-VP830U - page 56
56 8 •• • • •• •• • • • Insert editing replaces part of the recorded scene with new material. Both the picture and Hi-Fi audio soundtrack are replaced with new ones, while the normal audio soundtrack remains unchanged. If you wish to change the normal audio track as well, use the audio dubbing function simultaneously . Use you ...
-
JVC HR-VP830U - page 57
57 ENGAGE INSER T EDITING 6 Press INSERT . ● Y our VCR enters the Insert-Pause mode. (REC, PLAY and P AUSE light up on the front display panel.) ● The TV screen changes from the still picture to the input source you are going to record. ST AR T EDITING 7 Load the source cassette and play back the segment that is to be inserted. When you reach t ...
-
JVC HR-VP830U - page 58
58 PAUSE/ SPECIAL FUNCTION REMOTE PAUSE 8 •• • • •• •• • • • This function makes it easier to create edited videos when your VCR is used as the source player in combination with another VCR equipped with a Remote P AUSE Connector . Y ou can pre- program up to 8 scenes or “cuts” for automatic editing ...
-
JVC HR-VP830U - page 59
59 END R.A. EDIT 11 Press MENU as many times as necessary to return to the normal screen, and engage the Stop mode for the both VCRs. NOTES: ● Y ou can also monitor the sound when sear ching for scenes you want to edit in steps 7 – 8 . Since you can hear the soundtrack during selection, you can avoid abrupt or unnatural sounding scene-to-scene ...
-
JVC HR-VP830U - page 60
60 SPECIAL FEA TURES TV Multi-Brand Remote Contr ol The VCR's remote control can control several functions on JVC remote control TVs and on the brands of remote control TVs listed below . 12 45 3 6 8 0 7 9 POWER NUMBER ENTER CH VOL. +/- TV/VIDEO STOP TV/CABLE/VCR TURN ON THE TV 1 T urn the power on using the TV's remote control. SET REMOT ...
-
JVC HR-VP830U - page 61
61 Cable Box Multi-Brand Remote Control The VCR's remote control can control functions on the brands of cable boxes listed below . Some cable box brands have more than one code. If your cable box does not function with a specified code, try other codes. 12 45 3 6 8 0 7 9 POWER NUMBER ENTER CH STOP TV/CABLE/VCR CABLE BOX BRAND NAME BRAND CODE C ...
-
JVC HR-VP830U - page 62
62 Contr ol T wo JVC VCRs The supplied remote control is capable of controlling two JVC VCRs independently using the A/B CODE switch. Y ou can set this VCR so it responds to remote commands only when the switch is set to B , and another VCR so it responds to commands when the switch is set to A . The switch is preset to A because this VCR normally ...
-
JVC HR-VP830U - page 63
63 TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your VCR off for repair . POWER POSSIBLE CAUSE ● The power cord is disconnected. ● The TIMER mode is engaged with Auto T imer set to &q ...
-
JVC HR-VP830U - page 64
64 CORRECTIVE ACTION Insert a cassette. Remove the cassette and cover the hole with adhesive tape, or load a cassette on which the record safety tab is intact. Set the VCR to the appropriate channel. Refer to the directions and the illustration under “Edit T o Or From Another VCR” ( Z pg. 51) or “Edit From A Camcorder” ( Z pg. 52) and prope ...
-
JVC HR-VP830U - page 65
65 8. T imer recording begins as sched- uled, but the channel is always incorrect. 9. We moved, and now VCR Plus+ doesn’ t work properly . 10.“PROGRAM FULL” is displayed on the VCR Plus+ screen. ● Even though you don't use an external Cable Box, "CABLE BOX OUTPUT" is set to "ON". ● The receivable stations in the n ...
-
JVC HR-VP830U - page 66
66 QUESTIONS AND ANSWERS PLA YBACK Q. What happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. Can the VCR indefinitely remain in the still mode? A. No. It stops automatically after 5 minutes to protect the heads. Q. During search, slow , still and frame-by-frame playback, I ...
-
JVC HR-VP830U - page 67
67 INDEX List Of T erms This guide serves as a quick way to locate frequently used terms and on-screen display names. The first page on which the term appears is listed. Most terms appear more than once in the instruction manual. A A/B Code .................................................................... 62 Active V ideo Calibration ........... ...
-
JVC HR-VP830U - page 68
68 INDEX (cont.) FRONT VIEW 1 Power ON/OFF Button ( Z pg. 8) 2 Menu Button ( Z pg. 8) 3 INDEX MARK Button ( Z pg. 31) 4 Record [REC] Button ( Z pg. 26) 5 Pause Button ( Z pg. 26) 6 INDEX ERASE Button ( Z pg. 31) 7 Audio Dubbing [A. DUB] Button ( Z pg. 55) 8 INSER T Button ( Z pg. 56) 9 Recording Speed [SP/EP] Button ( Z pg. 26) 0 Cassette Loading S ...
-
JVC HR-VP830U - page 69
69 FRONT DISPLA Y P ANEL 1 Audio Level Meter ( Z pg. 43) 2 T imer Mode Indicator ( Z pg. 45) 3 Instant Timer Recording Indicator ( Z pg. 50) 4 Video Mode Indicator ( Z pg. 41) 5 “Cassette Loaded” Mark 6 Counter Memory Mark ( Z pg. 32) 7 T ape Speed Indicators ( Z pg. 26) 8 AM/PM Indicators ( Z pg. 7) 9 Clock Display ( Z pg. 7) 0 Channel Display ...
-
JVC HR-VP830U - page 70
70 GENERAL Power requirement : AC 120 V ` , 60 Hz Power consumption : 21 W T emperature Operating : 5°C to 40°C (41°F to 104°F) Storage : –20°C to 60°C (–4°F to140°F) Operating position : Horizontal only Dimensions (W x H x D) : 435 x 105 x 353 mm (15-3/16" x 4-3/16" x 13 -15/16") W eight : 5.5 kg (12.2 lbs) Format : VHS ...
-
JVC HR-VP830U - page 71
71 HOW TO LOCA TE YOUR JVC SERVICE CENTER TOLL FREE: 1-800-252-5722 JVC SER VICE & ENGINEERING COMP ANY OF AMERICA DIVISION OF US JVC CORP . F ACTORY SERVICE CENTER LOCA TIONS If you ship the product... ACCESSORIES 107 Little Falls Road 1500 Lakes Parkway 705 Enterprise Street Fairfield, NJ 07004-2105 Lawrenceville, GA 30243-5357 Aurora, IL 605 ...
-
JVC HR-VP830U - page 72
72 LIMITED WARRANTY CONSUMER VIDEO 1-90 JVC COMP ANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONL Y TO THE ORIGINAL PURCHASER A T RET AIL to be FREE FROM DEFECTIVE MA TERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below . ("The Warranty Period") THIS LIMIT ...
-
JVC HR-VP830U - page 73
73 MEMO ...
-
JVC HR-VP830U - page 74
MEMO ...
-
JVC HR-VP830U - page 75
...
-
JVC HR-VP830U - page 76
HR-VP830U COPYRIGHT © 1996 VICTOR COMPANY OF JAPAN, LTD. U/U(C) Printed in Malaysia 0696HOV * UN * PJ JV C COMP ANY OF AMERIC A DIVISION OF US JVC CORP . 41 Slater Drive, Elmwood Park, N .J . 07407 ...
Do you have a question concerning JVC HR-VP830U?
Use the form below
If you did not solve your problem by using a manual JVC HR-VP830U, ask a question using the form below. If a user had a similar problem with JVC HR-VP830U it is likely that he will want to share the way to solve it.