English dropdown-ico

Manual Life Fitness 841101

14 pages 0.73 mb
Download

Go to site of 14

Summary
  • Life Fitness 841101 - page 1

    841 101 WEIGHT ST ACK OPTION CLASS H P AR T # 6754401 REV . A V ersion: 841101 Revision: 06/19/01 1 ASSEMBL Y INSTRUCTIONS ...

  • Life Fitness 841101 - page 2

    IMPOR T ANT NOTES Please note: T ools Required for Assembly * Thank you for purchasing the Parabody 841 101 WEIGHT ST ACK OPTION. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function. * 3/4” wrench * 9/16” wrench * Ratchet with 3/4” ...

  • Life Fitness 841101 - page 3

    3 P A R TS LIST PA R T # 6750803 6753703 6274402 6275302 6609002 6610402 6750503 6176201 6754501 6189501 31 16101 31 16201 6284501 6714601 6758701 6577701 6542402 3103102 3108002 6595201 31 17401 6467001 KEY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 QTY 1 1 1 1 1 1 1 2 2 1 1 6 1 1 1 1 2 4 2 2 4 1 PA R T # 3102901 3102933 3102922 3102 ...

  • Life Fitness 841101 - page 4

    4 FIGURE 2 STEP 2: • SECUREL Y assemble the LOW ROW A TT ACHMENT (5) and the UPRIGHT (1) to the POWER RACK using two 3/8 X 3-1/4” BOL TS (27), four 3/8” W ASHERS (31), and two 3/8” LOCK NUTS (32). See FIGURE 2. 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 1 36 5 31 32 POWER RACK • Insert two 2” SQ ENDCAPS (36) into the ends of the UPRIGHT (1) a ...

  • Life Fitness 841101 - page 5

    5 FIGURE 4 • Insert two WEIGHT PLA TE BUSHINGS (42) into the “P ARABODY” side of each of the twenty WEIGHT PLA TES (43) as shown in FIGURE 4. STEP 4 43 42 FIGURE 3 STEP 3 • Slide one 2” SQ. COVER CAP (22) over the end of the WEIGHT ST ACK BASE (7 ) as shown in FIGURE 3. • SECUREL Y assemble the WEIGHT ST ACK BASE (7) to the UPRIGHT (1) ...

  • Life Fitness 841101 - page 6

    6 • Insert four CAP PLUGS (21) into the bottom end & top end of the two GUIDE RODS (9) as shown in FIGURE 5. STEP 5: FIGURE 5 9 31 23 3/8 X 1-1/4” 13 43 10 21 7 19 14 21 • Insert two GUIDE RODS (9) into the WEIGHT ST ACK BASE (7) as shown on FIGURE 5. (NOTE: Lubricate GUIDE RODS (9) with silicon or teflon spray available at most hardwar e ...

  • Life Fitness 841101 - page 7

    7 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • SECUREL Y assemble two 3-1/2” PULLEYS (12) to the TO P BOOM (2) using two 3/8 X 2-3/4” BOL TS (25), four 3/8” FLANGE SP ACERS (33), and two 3/8” LOCK NUTS (32). See FIGURE 6. (NOTE: BEFORE TIGHTENING , MAKE SURE CABLE (15) IS IN THE GROOVES OF THE PULLEYS.) STEP 6: • Insert two 2 X 3” END CAPS ...

  • Life Fitness 841101 - page 8

    8 STEP 8: FIGURE 8 • SECUREL Y assemble two 3-1/2” PULLEYS (12) to the TO P BOOM (2) using two 3/8 X 2-3/4” BOL TS (25), four 3/8” FLANGE SP ACERS (33), and two 3/8” LOCK NUTS (32). See FIGURE 8. (NOTE: BEFORE TIGHTENING , MAKE SURE CABLE (15) IS IN THE GROOVES OF THE PULLEYS.) • Route threaded end of the LA T CABLE (15) around the one ...

  • Life Fitness 841101 - page 9

    9 STEP 9: FIGURE 9 • Swing the GUIDE RODS (9) under the T OP BOOM (2) as shown on FIGURE 9. • Assemble the TO P BOOM (2) over the GUIDE RODS (9) and SECUREL Y assemble the T OP BOOM (2) to the UPRIGHT (1) using two 1/2 X 3” BOL TS (28), two 1/2” W ASHERS (29), and one 1/2” LOCK NUT (30). See FIGURE 9. • SECUREL Y assemble the T OP BOOM ...

  • Life Fitness 841101 - page 10

    10 FIGURE 10 STEP 10: 3/8 X 2-3/4” 25 • Loop the ball end of the LOW ROW CABLE (16) around one 4-1/2” PULLEY (11) and SECUREL Y assemble the 4-1/2” PUL- LEY (1 1) to the UPRIGHT (1) using two 3/8 X 2-3/4” BOL TS (25), two 3/8” FLANGE SP ACERS (33), two 3/8” W ASHERS (31), and two 3/8” LOCKNUTS (32). (NOTE: Make sure CABLE is r outed ...

  • Life Fitness 841101 - page 11

    11 FIGURE 1 1 STEP 1 1: • Route the threaded end of the LOW ROW CABLE (16) around the bottom PULLEY of the PULLEY & PLA TE ASSEMBL Y (17) as shown in FIGURE 11 . 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 FIGURE 12 STEP 12: 16 • Screw the threaded end of the LOW ROW CABLE (16) approximately 3/4” into the end of the post on the WEIGHT ST ACK BAS ...

  • Life Fitness 841101 - page 12

    12 STEP 13: FIGURE 13 • Attach the LA T BAR (4) to the ball end of the LA T CABLE (15) using one 5/16” SNAP LINK (40) as shown in FIGURE 13.. • Attach the LOW ROW BAR (3) to the ball end of the LOW ROW CABLE (16) using two SNAP LINKS (40) and one 12 LINK CHAIN (41) as shown in FIGURE 14. 4 15 40 STEP 14: FIGURE 14 • Slide two 1 X 8” GRIPS ...

  • Life Fitness 841101 - page 13

    FIGURE 15 STEP 15: 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 FIGURE 16 STEP 16: • When performing the LA T PULL exercise, insert the KNEE SUPPOR T (6) into the hole of the SAFETY RAIL as shown in FIG- URE 16 and simply lower the SAFETY RAIL down until roller pads contact knees. • Slide two ROLLER P ADS (8) onto the KNEE SUPPOR T (6), then insert one ...

  • Life Fitness 841101 - page 14

    14 STEP 17: FIGURE 17 • If upon completion of assembly , the HEAD PLA TE (14) does not sit on top of the first WEIGHT PLA TE (43), push the HEAD PLA TE (14) down, insert the WEIGHT ST ACK PIN (39) and perform several repetitions at the press station. This will relax the cable system and prevent the HEAD PLA TE (14) from lifting up. See FIGURE 17. ...

Manufacturer Life Fitness Category Home Gym

Documents that we receive from a manufacturer of a Life Fitness 841101 can be divided into several groups. They are, among others:
- Life Fitness technical drawings
- 841101 manuals
- Life Fitness product data sheets
- information booklets
- or energy labels Life Fitness 841101
All of them are important, but the most important information from the point of view of use of the device are in the user manual Life Fitness 841101.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Life Fitness 841101, service manual, brief instructions and user manuals Life Fitness 841101. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Life Fitness 841101.

Similar manuals

A complete manual for the device Life Fitness 841101, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Life Fitness 841101 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Life Fitness 841101.

A complete Life Fitness manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Life Fitness 841101 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Life Fitness 841101, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Life Fitness 841101, that we can find in the current document
3. Tips how to use the basic functions of the device Life Fitness 841101 - which should help us in our first steps of using Life Fitness 841101
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Life Fitness 841101
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Life Fitness 841101 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Life Fitness 841101?

Use the form below

If you did not solve your problem by using a manual Life Fitness 841101, ask a question using the form below. If a user had a similar problem with Life Fitness 841101 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)