English dropdown-ico

Manual NEC V302H

110 pages Not applicable
Download

Go to site of 110

Summary
  • NEC V302H - page 1

    Projector V302X/V302W/ V332X/V332W/ V302H User ’ s Manual Model No. NP-V302X/NP-V302W/NP-V332X/NP-V332W/NP-V302H ...

  • NEC V302H - page 2

    Ver.1 4/15 • DLP, BrilliantColor, and DLP Link are trademarks of Texas Instruments. • IBM is a trademark or registered trademark of International Business Machines Corporation. • Macintosh, Mac OS X, iMac, and PowerBook are trademarks of Apple Inc., registered in the U.S. and other countries. • Microsoft, Windows, Windows 7, Windows Vista, ...

  • NEC V302H - page 3

    i English ... Impor tant Inf or ma tion Safety Cautions Precautions Please read this manual carefully before using your NEC projector and keep the manual handy for future reference. CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and shou ...

  • NEC V302H - page 4

    ii English ... Impor tant Inf or ma tion RF Interference (for USA only) W ARNING The Federal Communications Commission does not allow any modications or changes to the unit EXCEPT those specied by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equi ...

  • NEC V302H - page 5

    iii English ... Impor tant Inf or ma tion Fire and Shock Precautions • Ensure that there is sufcient ventilation and that vents are unobstructed to prevent the build-up of heat inside your projector. Allow at least 4 inches (10cm) of space between your projector and a wall. • Do not try to touch the exhaust vent as it can become heated while ...

  • NEC V302H - page 6

    iv English ... Impor tant Inf or ma tion Remote Control Precautions • Handle the remote control carefully. • If the remote control gets wet, wipe it dry immediately. • Avoid excessive heat and humidity. • Do not short, heat, or take apart batteries. • Do not throw batteries into re. • If you will not be using the remote control for a ...

  • NEC V302H - page 7

    v English ... Impor tant Inf or ma tion About High Altitude mode • Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 2500 feet/760 meters or higher. • Using the projector at altitudes approximately 2500 feet/760 meters or higher without setting to [HIGH ALTITUDE] can cause the projector to overheat and the pr ...

  • NEC V302H - page 8

    1 ... English Table of Contents T able of Contents............................... 1 Usage Notice ..................................... 2 Precautions .........................................2 Introduction ........................................ 4 Product Features ................................4 Package Overview ..............................5 Pr ...

  • NEC V302H - page 9

    2 English ... Usage Notice Precautions Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit. ■ Warning- This projector will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages. ■ Warning- Reset the “CLEAR LAMP HOURS” function ...

  • NEC V302H - page 10

    3 ... English Usage Notice Do: ■ Turn off the product before cleaning. ■ Use a soft cloth moistened with mild detergent to clean the display housing. ■ Disconnect the power plug from AC outlet if the product is not being used for a long period of time. ■ If the lens is soiled, use a commercially available cleaning cloth for lens. Do not: ? ...

  • NEC V302H - page 11

    4 English ... Introduction Product Features ■ High resolution Full HD (1920 x 1080) support. ■ 0.5 W in standby condition with energy saving technology Selecting [NORMAL] for [STANDBY MODE] from the menu can put the projector in power-saving mode that consumes only 0.5 W (typical value). ■ Two HDMI input ports provide digital signal The two H ...

  • NEC V302H - page 12

    5 ... English Introduction Power Cord x1 Remote Control (P/N:7N901052) Projector Package Overview This projector comes with all the items shown below. Check to make sure your unit is completed. Contact your dealer immediately if anything is missing.  Due to the difference in applications for each country, some regions may have different acces ...

  • NEC V302H - page 13

    6 English ... Introduction 1. Exhaust Vent 2. Focus Ring 3. Control Panel 4. Zoom Lever 5. Intake Vent 6. Security Lock Hunger 7. Remote Control Sensor 8. Lens Projector Product Overview 9. Tilt Foot Release Button 10. Lens Cap 11. Ports 12. Tilt Foot 13. Kensington TM Lock Port 14. Monaural Speaker (8W) 15. Lamp Cover 2 3 4 5 1 6 7 8 9 11 12 13 10 ...

  • NEC V302H - page 14

    7 ... English Introduction Ports 1. SERVICE Port (for service purpose only) 2. LAN Port (RJ-45) 3. HDMI 2 IN Port 4. HDMI 1/MHL IN or HDMI 1 Port 5. COMPUTER IN Port 6. MONITOR OUT Port (separate sync signal only) 7. PC CONTROL Port 8. VIDEO IN Port 9. AUDIO IN L/R Port 10. AUDIO IN Jack (3.5mm mini jack) 11. Kensington TM Lock Port 12. AUDIO OUT P ...

  • NEC V302H - page 15

    8 English ... Introduction Control Panel NP-V332X/NP-V332W/NP-V302H NP-V302X/NP-V302W 10 10 2 4 5 6 7 8 9 1 3 12 10 11 11 2 4 5 6 7 8 9 1 3 12 ...

  • NEC V302H - page 16

    9 ... English Introduction 1 VOLUME - Decrease speaker volume. 2 Four Directional Select Keys -Use , , or to select items or make adjustments to your selection. -Use as Quick Keys. Please see the page 13. 3 VOLUME + Increase speaker volume. 4 LAMP LED Indicate the projector’s lamp status. 5 STATUS LED Indicate the projector’s various status. 6 ...

  • NEC V302H - page 17

    10 English ... Introduction Remote Control 1 POWER ON Power on the projector. Please see the “Power On/Off the Projector” section on pages 29- 3 0 . 2 POWER OFF Power off the projector. Please see the “Power On/Off the Projector” section on pages 29- 3 0 . 3 4 5 18 10 11 13 19 24 26 28 30 27 12 1 16 2 8 23 21 9 25 14 29 31 17 15 6 7 20 22 ...

  • NEC V302H - page 18

    11 ... English Introduction 3 COMPUTER 1 Press “1” to choose Computer IN connector. 4 COMPUTER 2 No function. 5 HDMI 1 Press “4” to choose HDMI 1/ MHL IN connector (*1) or HDMI1 connector (*2). 6 VIDEO Press “VIDEO” to choose VIDEO IN connector. 7 USB A No function. 8 ID SET Press ID SET for indicating the ID number. 9 AV-MUTE Momentari ...

  • NEC V302H - page 19

    12 English ... Introduction 18 HDMI 2 Press “5” to choose HDMI 2 IN connector. 19 DISPLAY PORT No function. 20 USB B No function. 21 Number Button No function. 22 LAN No function. 23 CLEAR Clear the password while you input the password. 24 FREEZE Freeze To pause the screen image. Press again to resume the screen image. 25 EXIT Exit the setting ...

  • NEC V302H - page 20

    13 ... English Introduction Quick Key Activate Behavior Quick keys are available when no OSD is displayed. The Quick Keys can be accessed on Control Panel or remote control ( ). The behavior of the Quick Keys is as described in the following tables. NP-V302X/NP-V302W Quick Key Function Activate Condition LEFT ( ) / RIGHT ( ) Pop Volume OSD and allo ...

  • NEC V302H - page 21

    14 English ... Introduction Battery Installation Remote Control Precautions • Handle the remote control carefully. • If the remote control gets wet, wipe it dry immediately. • Avoid excessive heat and humidity. • Do not place the battery upside down. • Replace only with the same or equivalent type recommended by the manufacturer. • Disp ...

  • NEC V302H - page 22

    15 ... English Introduction Using the utility software “Virtual Remote Tool” that you can download from our web site (http://www.nec-display.com/ dl/en/index.html), Virtual Remote screen (or toolbar) can be displayed on your computer screen. This will help you perform operations such as projector’s power on or off and signal selection via a L ...

  • NEC V302H - page 23

    16 English ... Introduction Step 1: Install Virtual Remote Tool on the computer • Supported OS Virtual Remote Tool will run on the following operating systems. Wi nd ow s 8. 1 * 1, W in do ws 8 .1 P ro * 1, W in do ws 8 .1 E nt er pr i se * 1, W in do ws 8 * 1, Wi nd ow s 8 Pr o * 1, W in do ws 8 E nt er pr is e *1 , Windows 7 Home Basic, Windows ...

  • NEC V302H - page 24

    17 ... English Introduction Read “END USER LICENSE AGREEMENT” carefully. 4 If you agree, click “I accept the terms in the license agreement” and then click “Next”. Follow the instructions on the installer screens to complete the installation. After the installation is completed, the shortcut icon for Virtual Remote Tool. TIP:Uninstallin ...

  • NEC V302H - page 25

    18 English ... Introduction Step 3: Start Virtual Remote Tool Start using the shortcut icon Start from the Start menu Click [Start] -> [All Programs] or [Programs] -> [NEC Projector User Supportware] -> [Virtual Remote Tool] -> [Virtual Remote Tool]. When Virtual Remote Tool starts for the rst time, “Easy Setup” window will be di ...

  • NEC V302H - page 26

    19 ... English Introduction Exiting Virtual Remote Tool 1 Click the Virtual Remote Tool icon on the Taskbar. The pop-up menu will be displayed. 2 Click “Exit”. The Virtual Remote Tool will be closed. Viewing the help le of Virtual Remote Tool Displaying the help le using the taskbar 1 Click the Virtual Remote Tool icon on the taskbar when ...

  • NEC V302H - page 27

    20 English ... Introduction Controlling the Projector over a LAN [Using on Windows] Using the utility software “PC Control Utility Pro 4” that you can download from our web site (http://www.nec-display.com/dl/en/index.html), the projector can be controlled from a computer over a LAN. Control Functions Power On/Off, signal selection, picture fre ...

  • NEC V302H - page 28

    21 ... English Introduction Step 1: Install PC Control Utility Pro 4 on the computer • Supported OS - PC Control Utility Pro 4 will run on the following operating systems. Windows 8.1*1, Windows 8.1 Pro *1, Windows 8.1 Enterprise *1, Windows 8 *1, Windows 8 Pro *1, Windows 8 Enterprise *1, Windows 7 Home Basic, Windows 7 Home Premium, Windows 7 P ...

  • NEC V302H - page 29

    22 English ... Introduction Read “END USER LICENSE AGREEMENT” carefully. 4 If you agree, click “I accept the terms in the license agreement” and then click “Next”. Follow the instructions on the installer screens to complete the installation. TIP:Uninstalling PC Control Utility Pro 4 • To uninstall PC Control Utility Pro 4, do the sam ...

  • NEC V302H - page 30

    23 ... English Introduction 5 Click “Open” in the dialog box. If prompted, enter an administrator name and password. The installer will start. 6 Click “Next”. “END USER LICENSE AGREEMENT” screen will be displayed. 7 Read “END USER LICENSE AGREEMENT” and click “Next”. The conrmation window will be displayed. 8 Click “I accep ...

  • NEC V302H - page 31

    24 English ... Introduction Viewing 3D Images The projector provides 3D images to a user wearing commercially available LCD shutter eyeglasses. CAUTION Health precautions Before viewing, be sure to read health care precautions that may be found in the user’s manual included with your LCD shutter eyeglasses or your 3D compatible content such as DV ...

  • NEC V302H - page 32

    25 ... English Installation Connecting the Projector  Make sure that the power plug is fully inserted into both the projector AC IN termi- nal and the wall outlet.  The MONITOR OUT connector supports Separate sync signal only. Connect to Computer/Notebook 1................................................................................. ...

  • NEC V302H - page 33

    26 English ... Installation 1............................................................................................. Power cord (supplied) 2. .............................................................................................................. HDMI cable 3........................................................................ Comput ...

  • NEC V302H - page 34

    27 ... English Installation  Due to the difference in applications for each country, some regions may have different accessories.  When Deep Color is set to ON on your HDMI equipment, video or audio noise may be generated depending on the equipment or cable being used. Should this happen, set Deep Color to OFF (8 bit). Connect to Video ...

  • NEC V302H - page 35

    28 English ... Installation 1............................................................................................. Power cord (supplied) 2. ............................................................................................................ HDMI cable* 3.................................................... 15-Pin to 3 RCA Component/H ...

  • NEC V302H - page 36

    29 ... English Installation Powering On/Off the Projector  Turn on the projector rst and then the signal sources.  (*)When “Normal” is selected for “Standby Mode”, the Power LED indicator will turn red; when “Network standby” is selected for “Standby Mode”, the Power LED indicator will turn orange. POWER/ST ANDBY 1  W ...

  • NEC V302H - page 37

    30 English ... Installation Powering Off the Projector 1. Press the “ POWER OFF ” button on the remote control or the button on the control panel to turn off the projector lamp, you will see a message as below on the on-screen display. ARE YOU SURE YES NO POWER OFF 2. Press the “POWER OFF” button again to conrm. 3. Disconnect the power c ...

  • NEC V302H - page 38

    31 ... English Installation Warning Indicator  When the “STATUS” LED indicator ashes red, it indicates the projector has overheated. The projector will auto matically shut itself down. WARNING! TEMPERA TURE TOO HIGH 1. MAKE SURE AIR IN AND OUTLETS ARE NOT BLOCKED. 2. MAKE SURE THE ENVIRONMENT TEMPERA TURE IS UNDER 40 DEGREE C  When the ...

  • NEC V302H - page 39

    32 English ... Installation Adjusting the Projected Image Adjusting the Height of Projection Image The projector is equipped with the tilt foot for adjusting the image height. 1. Press the tilt foot release button. 1 K ee p to pre ss th e til t f oo t rel eas e bu tto n f or r ais ing o r lowering the projector, then lock the button by releasing it ...

  • NEC V302H - page 40

    33 ... English Installation Adjusting the Projector’s Focus To focus the image, rotate the focus ring until the image is clear. To zoom the image, turn the zoom lever in or out. Focus Ring Zoom Lever ...

  • NEC V302H - page 41

    34 English ... Installation Adjusting Projection Image Size (Diagonal) Projection Image Size from 30” to 300” (0.76 to 7.62 meters). Models: NP-V332X, NP-V302X Screen Size (B) (C) D (WIDE) α α Diagonal (A) Width Height Wide T ele Wide T ele inch mm inch mm inch mm inch mm inch mm inch mm inch mm d egree de gree 30 762 24 610 18 457 12 297 47 ...

  • NEC V302H - page 42

    35 ... English Installation B = V ertical distance between lens center and screen center . C = Throw distance. D = V ertical distance between lens center and bottom of screen (top of screen for ceiling application). = Throw angle. α Screen Size (B) (C) D (WIDE) α α Diagonal (A) Width Height Wide T ele Wide T ele inch mm inch mm inch mm inch mm i ...

  • NEC V302H - page 43

    36 English ... Installation Screen Size (B) (C) D (WIDE) α α Diagonal (A) Width Height Wide T ele Wide T ele inch mm inch mm inch mm inch mm inch mm inch mm inch mm d egree de gree 240 6096 204 5169 127 3231 80 2025 315 8012 346 8788 16 409 14.2 13.0 270 6858 229 5816 143 3635 90 2278 355 9014 389 9887 18 460 14.2 13.0 300 7620 254 6462 159 4039 ...

  • NEC V302H - page 44

    37 ... English User Controls The Projector has a multilingual On Screen Display that allows you to make image adjustments and change a variety of settings. How to operate 1. To open the OSD, press the MENU button on the Remote Control. 2. When OSD is displayed, use the buttons to select any item in the main menu. While making a selection on a parti ...

  • NEC V302H - page 45

    38 English ... User Controls Menu Tree MAIN MENU SUB MENU SETTINGS IMAGE GENERAL PICTURE MODE PRESENTATION/HIGH-BRIGHT/VIDEO/ MOVIE/SRGB/BLACKBOARD/USER1/ USER2 WALL COLOR OFF/RED/GREEN/BLUE/CYAN/ MAGENTA/YELLOW BRIGHTNESS 0~100 CONTRAST 0~100 SHARPNESS 0~31 SATURATION DEPEND ON SOURCE FORMAT HUE DEPEND ON SOURCE FORMAT ADVANCED GAMMA FILM/VIDEO/GR ...

  • NEC V302H - page 46

    39 ... English User Controls MAIN MENU SUB MENU SETTINGS SETTING GENERAL ORIENTATION DESKTOP FRONT/DESKTOP REAR/ CEILING FRONT/CEILING REAR HDMI SETTINGS (NP-V302H, NP-V332W, and NP-V332X) -VIDEO LEVEL (AUTO/NORMAL/ ENHANCED)/ AUDIO SELECT (HDMI1 and MHL/ COMPUTER), OR HDMI2/ COMPUTER (NP-V302W and NP-V302X) -VIDEO LEVEL (AUTO/NORMAL/ ENHANCED)/ AU ...

  • NEC V302H - page 47

    40 English ... User Controls MAIN MENU SUB MENU SETTINGS OPTIONS GENERAL INPUT SEARCH ON/OFF INPUT (NP-V302H, NP-V332W, and NP-V332X) - COMPUTER/HDMI1 and MHL/HDMI2, VIDEO (NP-V302W and NP-V302X) - COMPUTER/HDMI1/HDMI2, VIDEO FAN MODE AUTO/HIGH ALTITUDE INFORMATION HIDE ON/OFF ID DISPLAY ON/OFF BACKGROUND COLOR BLACK/BLUE RESET YES/NO LAMP SETTINGS ...

  • NEC V302H - page 48

    41 ... English User Controls PICTURE MODE There are many factory presets optimized for various types of images. Use the or button to select the item. PICTURE MODE PRESENT A TION HIGH-BRIGHT MOVIE VIDEO sRGB BLACKBOARD USER1 USER2  PRESENTATION: For computer or notebook.  HIGH-BRIGHT: Maximum brightness from PC input.  VIDEO: This mode is r ...

  • NEC V302H - page 49

    42 English ... User Controls WALL COLOR Use this function to choose a proper color according to the wall. It will compensate the color deviation due to the wall color to show the correct image tone. WALL COLOR OFF RED BLUE GREEN CY AN MAGENT A YELLOW BRIGHTNESS Adjust the brightness of the image.  Press the button to darken image.  Press the ...

  • NEC V302H - page 50

    43 ... English User Controls SHARPNESS Adjust the sharpness of the image.  Press the button to decrease the sharpness.  Press the button to increase the sharpness. SHARPNESS EXIT ADJUST EXIT SATURATION Adjust a video image from black and white to fully saturated color.  Press the button to decrease the amount of saturation in the image. ? ...

  • NEC V302H - page 51

    44 English ... User Controls  The Color Temp is not available when “HIGH- BRIGHT” or “sRGB” is selected for “PICTURE MODE”. SCREEN IMAGE SETTING OPTIONS GENERAL ADV ANCED GAMMA COLOR TEMP . DYNAMIC CONTRAST COLOR COLOR SP ACE FILM LOW COMPUTER SELECT EXIT MOVE MOVE OFF AUTO BrilliantColor™ GAMMA This allows you to choose a gamma ...

  • NEC V302H - page 52

    45 ... English User Controls BrilliantColor™ This adjustable item utilizes a new color-processing algorithm and system level enhancements to enable higher brightness while providing true, more vibrant colors. The range is from “0” to “10”. If you prefer a stronger enhanced image, adjust toward the maximum setting. For a smoother, more nat ...

  • NEC V302H - page 53

    46 English ... User Controls COLOR Press ENTER into the next menu as below and then use the or button to select item. COLOR RED GAIN GREEN GAIN BLUE GAIN CY AN GAIN MAGENT A GAIN YELLOW GAIN RED BIAS GREEN BIAS BLUE BIAS RESET  RED GAIN RED GAIN EXIT ADJUST EXIT  GREEN GAIN GREEN GAIN EXIT ADJUST EXIT  BLUE GAIN BLUE GAIN EXIT ADJUST EXIT ...

  • NEC V302H - page 54

    47 ... English User Controls  MAGENTA GAIN MAGENT A GAIN EXIT ADJUST EXIT  YELLOW GAIN YELLOW GAIN EXIT ADJUST EXIT  RED BIAS RED BIAS EXIT ADJUST EXIT  GREEN BIAS GREEN BIAS EXIT ADJUST EXIT  BLUE BIAS: BLUE BIAS EXIT ADJUST EXIT  Use the or button to select RED, GREEN, BLUE, CYAN, MAGENTA AND YELLOW COLORS. ...

  • NEC V302H - page 55

    48 English ... User Controls  RESET: Choose “YES” to return the factory default settings for color adjustments. RESET NO YES COLOR SPACE Select an appropriate color matrix type from AUTO, RGB or YUV. COLOR SP ACE AUTO RGB YUV ...

  • NEC V302H - page 56

    49 ... English User Controls SCREEN IMAGE SETTING OPTIONS GENERAL 3D SETTINGS H KEYSTONE AUTO COMPUTER SELECT EXIT MOVE MOVE OVERSCAN ASPECT RA TIO V KEYSTONE ASPECT RATIO Use this function to choose your desired aspect ratio.  4:3: This format is for 4×3 input sources.  16:9: This format is for 16×9 input sources, like HDTV and DVD enhance ...

  • NEC V302H - page 57

    50 English ... User Controls OVERSCAN Overscan function removes the noise in a video image. Overscan the image to remove video encoding noise on the edge of video source. OVERSCAN KEYSTONE (NP-V332W, NP-V332X, NP-V302H) Press the or button to adjust image distortion vertically (V Keystone) or horizontally (H Keystone). KEYSTONE EXIT ADJUST MOVE H K ...

  • NEC V302H - page 58

    51 ... English User Controls SCREEN IMAGE SETTING OPTIONS GENERAL 3D SETTINGS 3D STRUCTURE OFF COMPUTER SELECT EXIT MOVE MOVE 3D INVERT 3D OFF FRAME P ACKING 3D Choose “ON” to turn this item on for 3D images. (default: OFF) 3D OFF ON 3D INVERT  Choose “ON” to invert left and right frame contents.  Choose “OFF” for default frame co ...

  • NEC V302H - page 59

    52 English ... User Controls TIP: 3D supported signal • For PC Signal : 1024x768@60/120Hz 1280x720@60Hz 1280x800@60/120Hz 1920x1080@60Hz • For Video Signal : 480i@60Hz • For HDMI Signal : 720p (Frame Packing) 1280 x 720@50/60/59.94 1080p (Frame Packing) 1920 x 1080@23.98/24 720p (Top and Bottom) 1280 x 720@50/60/59.94* (*Select manually) 1080 ...

  • NEC V302H - page 60

    53 ... English User Controls SCREEN IMAGE SETTING OPTIONS GENERAL SIGNAL LANGUAGE ORIENT ATION HDMI SETTINGS MUTE VOLUME ENGLISH DESKTOP REAR COMPUTER SELECT EXIT MOVE MOVE ADV ANCED OFF LANGUAGE Choose the multilingual OSD menu. Press the or button into the sub menu and then use the or button to select your preferred language. Press ENTER to na ...

  • NEC V302H - page 61

    54 English ... User Controls  CEILING FRONT: When selected, the image will turn upside down.  CEILING REAR This is the default selection. The image will appear reversed in upside down position. ORIENT A TION DESKTOP FRONT CEILING FRONT DESKTOP REAR CEILING REAR HDMI SETTINGS Use this feature to set HDMI1/MHL or HDMI2 HDMI SETTINGS AUTO COMPUT ...

  • NEC V302H - page 62

    55 ... English User Controls  AUDIO SELECT: Use this function to select the audio souce from “HDMI1/MHL”, “HDMI2”or “COMPUTER ”. AUDIO SELECT HDMI1/MHL COMPUTER AUDIO SELECT HDMI2 COMPUTER MUTE  Choose “ON” to turn mute on.  Choose “OFF” to turn mute off. MUTE OFF ON VOLUME  Press the button to decrease the volume. ? ...

  • NEC V302H - page 63

    56 English ... User Controls SCREEN IMAGE SETTING OPTIONS GENERAL SIGNAL PHASE CLOCK H. POSITION V . POSITION COMPUTER SELECT EXIT MOVE MOVE ADV ANCED PHASE Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or ickers, use this function to correct it. PHASE EXIT ADJUST EXIT CLOCK Change the di ...

  • NEC V302H - page 64

    57 ... English User Controls H. POSITION  Press the button to move the image left.  Press the button to move the image right. H. POSITION EXIT ADJUST EXIT V. POSITION  Press the button to move the image down.  Press the button to move the image up. V . POSITION EXIT ADJUST EXIT ...

  • NEC V302H - page 65

    58 English ... User Controls SCREEN IMAGE SETTING OPTIONS GENERAL SIGNAL LOGO NETWORK CLOSED CAPTION SECURITY TEST P A TTERN OFF COMPUTER SELECT EXIT MOVE MOVE ADV ANCED OFF OFF LOGO Use th i s f u nct ion to d isplay t he sta r t up sc re en ( NEC logo ) .  ON: Displays the NEC logo.  OFF: Not display the NEC logo. LOGO OFF ON NETWORK Please ...

  • NEC V302H - page 66

    59 ... English User Controls SECURITY  OFF: Choose “OFF” to be able to switch on the projector without password verication.  ON: Choose “ON” to use security verication when turning on the projector. SECURITY OFF ON ENTER CURRENT SECURITY CODE SECURITY KEYWORD EXIT ENTER INV ALID-KEYWORD TOO SHORT First T ime: 1. The default pass ...

  • NEC V302H - page 67

    60 English ... User Controls SECURITY ADJUST EXIT SECURITY OFF SECURITY TIMER CHANGE P ASSWORD SELECT MOVE SECURITY TIMER Use th i s f u nct ion to s et how long (MONTH/ D A Y / HO U R ) t he proj ec tor ca n b e us ed. On ce t h is t i me h as el apsed you wi l l be re quested t o enter your pa ss word agai n. MONTH EXIT MOVE ADJUST SECURITY TIMER ...

  • NEC V302H - page 68

    61 ... English User Controls 4. Use di re ct ion keys, to ent er your new pa ss word and t hen press ENTER to con r m your pas sword.  Con r m ne w pas sword CONFIRM NEW SECURITY CODE CHANGE P ASSWORD EXIT ENTER 5 . Enter t he n ew pas sword agai n a nd pre ss ENTER to con r m.  If t he i ncor r ec t pas sword is ente red 3 t i me s, ...

  • NEC V302H - page 69

    62 English ... User Controls NETWORK NETWORK ST ATUS DISCONNECT DHCP IP ADDRESS SUBNET MASK GA TEWA Y APPL Y OFF NETWORK STATUS Display the network connection status. (default: DISCONNECT) DHCP Use this function to select your desired startup screen. If you change the setting from one to another, when you exit the OSD menu, the new setting will tak ...

  • NEC V302H - page 70

    63 ... English User Controls SUBNET MASK Select subnet mask number. SUBNET MASK ADJUST SELECT MOVE EXIT GATEWAY Select the default gateway of the network connected to the projector. GA TEWA Y ADJUST MOVE SELECT EXIT APPLY Press ENTER to appl y th e sele ct ion. ...

  • NEC V302H - page 71

    64 English ... User Controls 1. Turn on DHCP to allow the DHCP server to automatically assign an IP, or manually enter the required network information. ENTER CURRENT SECURITY CODE SECURITY KEYWORD EXIT ENTER INV ALID-KEYWORD TOO SHORT NETWORK NETWORK ST ATUS DISCONNECT DHCP IP ADDRESS SUBNET MASK GA TEWAY APPL Y OFF 2. Then choose apply and press ...

  • NEC V302H - page 72

    65 ... English User Controls 4. Open “Projector Status and Control ” to control your projector. When making a direct connection from your computer to the projector Step 1: Find an IP Address (default:192.168.0.10) from LAN function of projector. 192.168.0.10 Step 2: Select apply and press th e ENTER b utton on t he r emote cont rol or t he cont ...

  • NEC V302H - page 73

    66 English ... User Controls Step 4: On the General tab, under This connection uses the following items , click Internet Protocol (TCP/IP) , and then click “Properties. ” Step 5: Click Use the following IP address , and type in as below: 1) IP address: 192.168.0.20 2) Subnet mask: 255.255.255.0 3) Default gateway:192.168.0.1 Step 6: To open Int ...

  • NEC V302H - page 74

    67 ... English User Controls Step 7: The Local Area Network (LAN) Setting dialog box appears , In the Proxy Server area , cancel the Use a proxy server for your LAN check box ., then click “ OK ” button twice. Step 8: Open your IE and type in the IP address of 192.168.0.10 in the URL then press th e ENTER b utton key. ...

  • NEC V302H - page 75

    68 English ... User Controls Step 9: Open “Projector Status and Control” to control your projector. ...

  • NEC V302H - page 76

    69 ... English User Controls SCREEN IMAGE SETTING OPTIONS GENERAL LAMP SETTINGS INPUT SEARCH INPUT F AN MODE INFORMA TION HIDE BACKGROUND COLOR RESET COMPUTER SELECT EXIT MOVE MOVE BLUE OFF OFF AUTO ID DISPLA Y OFF INPUT SEARCH  ON: The projector will search for other signals if the current input signal is lost.  OFF: The projector will only ...

  • NEC V302H - page 77

    70 English ... User Controls NP-V302X, NP-302W INPUT COMPUTER HDMI1 HDMI2 VIDEO FAN MODE  AUTO: The built-in fans automatically run at a variable speed according to the internal temperature.  HIGH ALTITUDE: The built-in fans run at high speed. Select this option when using the projector at altitudes approximately 2500 feet/760 meters or highe ...

  • NEC V302H - page 78

    71 ... English User Controls  ( * ) Except “LANGUAGE”, “LOGO”, “NETWORK”, “SECURITY”, “FAN MODE”, “BACKGROUND COLOR”, “LAMP LIFE REMAINING”, “LAMP HOURS USED”, and “STANDBY MODE”. BACKGROUND COLOR Use this feature to display a “BLACK”or “BLUE” screen when no signal is available. BACKGROUND COLOR BLA ...

  • NEC V302H - page 79

    72 English ... User Controls SCREEN IMAGE SETTING OPTIONS GENERAL LAMP SETTINGS LAMP LIFE REMAINING LAMP HOURS USED ECO MODE LAMP LIFE REMINDER COMPUTER SELECT EXIT MOVE MOVE OFF OFF CLEAR LAMP HOURS LAMP LIFE REMAINING Showing the Lamp life. LAMP HOURS USED Display the projection time. ECO MODE Choose “ECO” to dim the projector lamp which will ...

  • NEC V302H - page 80

    73 ... English User Controls LAMP LIFE REMINDER Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear when the lamp has reached the end of its life. LAMP LIFE REMINDER OFF ON USE THE SPECIFIED LAMP FOR SAFETY AND PERFORMANCE. ARE YOU SURE ? YES NO CLEAR LAMP HOURS Reset the ...

  • NEC V302H - page 81

    74 English ... User Controls INFORMATION To display the projector information for model no., serial number, source, resolution, and software version on the screen. COMPUTER SCREEN IMAGE SETTING OPTIONS INFORMA TION ADV ANCED MODEL NO. SERIAL NUMBER SOURCE RESOLUTION SOFTWARE VERSION SELECT EXIT MOVE MOVE COMPUTER CONTROL ID OPTIONS | INFORMATION ...

  • NEC V302H - page 82

    75 ... English User Controls SCREEN IMAGE SETTING OPTIONS INFORMA TION ADV ANCED ST ANDBY MODE DIRECT POWER ON AUTO POWER OFF (MIN) OFF TIMER (MIN) CONTROL P ANEL LOCK NORMAL COMPUTER SELECT EXIT MOVE MOVE OFF OFF CONTROL ID STANDBY MODE  NETWORK STANDBY: Choose “NETWORK STANDBY” to save power dissipation further < 0.5W.  NORMAL: Choos ...

  • NEC V302H - page 83

    76 English ... User Controls AUTO POWER OFF (MIN) Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has nished (in minutes). AUTO POWER OFF (MIN) EXIT ADJUST EXIT OFF TIMER (MIN) Sets the countdown timer interval. T ...

  • NEC V302H - page 84

    77 ... English User Controls CONTROL ID Use this feature to display the ID number of the projector when the "ID SET" button is pressed on the remote control. CONTROL ID EXIT MOVE SELECT CONTROL ID NUMBER CONTROL ID OFF CONTROL ID NUMBER ADJUST EXIT EXIT CONTROL ID (ACTIVE) ADJUST EXIT EXIT CONTROL ID OFF ON CONTROL ID WILL BE ENABLED ARE ...

  • NEC V302H - page 85

    78 English ... Appendices Problem: No image appears on screen  Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section.  Ensure the pins of connectors are not crooked or broken.  Check if the projection lamp has been securely installed. Please refer to the “Replacing ...

  • NEC V302H - page 86

    79 ... English Appendices 5. Select the “Change” under the “Monitor” tab . 6. Click on “Show all devices”. Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box.  If you are using a Notebook: 1. First, follow the steps above to adjust resolution of the computer. 2. ...

  • NEC V302H - page 87

    80 English ... Appendices Problem: Image is out of focus  Adjust the Focus Lever on the projector lens.  Make sure the projection screen is between the required distance from the projector. Please see the pages 3 2- 33). Problem: The image is stretched when displaying 16:9 DVD The projector automatically detects 16:9 DVD and adjusts the aspec ...

  • NEC V302H - page 88

    81 ... English Appendices Problem: LED Indicator message POWER LED Indicator Indicator Condition Projector Condition Note Off The main power is off. Without connecting power cable. Blinking light GREEN 0.5sec ON / 0.5sec OFF The projector is getting ready to turn on. -- GREEN 2.5sec ON / 0.5sec OFF Off Timer is working. -- ORANGE 0.5sec ON / 0.5sec ...

  • NEC V302H - page 89

    82 English ... Appendices LAMP LED Indicator Indicator Condition Projector Condition Note Off Normal Condition -- Blinking light RED 0.5sec ON / 0.5sec OFF Lamp has reached its end of life. -- Steady light RED Lamp has been used beyond its limit. The projector will not turn on until the lamp is replaced. GREEN [ECO MODE] is set to [ECO] ...

  • NEC V302H - page 90

    83 ... English Appendices Problem: Message Reminders  Over temperature - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. WARNING! TEMPERA TURE TOO HIGH 1. MAKE SURE AIR IN AND OUTLETS ARE NOT BLOCKED. 2. MAKE SURE THE ENVIRONMENT TEMPERA TURE IS UNDER 40 DEGREE C  Replac ...

  • NEC V302H - page 91

    84 English ... Appendices Replacing the lamp Optional lamp NP35LP (for NP-V332X / NP-V332W / NP-V302H) NP36LP (for NP-V302X / NP-V302W) The time to replace the lamp is differed from models. On NP-V302X, and NP-V302W, the projectors will detect the lamp life at 4500 hours in ECO Mode Off (6000 hours in ECO Mode) On NP-V332X, NP-V332W, and NP-V302H, ...

  • NEC V302H - page 92

    85 ... English Appendices Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped. Lamp Replacing Procedure: 1. Switch off the power to the projector by pressing the POWER OFF button on the remote control or the button on the control panel. 2. Allow t ...

  • NEC V302H - page 93

    86 English ... Appendices Cleaning procedure for the lens If the projection lens is dusty or blemished, please clean the lens as following procedure: 1. Turn off the projector and cool projector down for a while. 2. Unplug the power cord from outlet. 3. Blow the dust by blower for cameras which you could buy from camera shops.Wipe the lens gently u ...

  • NEC V302H - page 94

    87 ... English Appendices Specications Optical NP-V302X NP-V302W NP-V332X NP-V332W NP-V302H Projection System Single DLP ® chip (0.55", Aspect ratio 4:3) Single DLP ® chip (0.65", Aspect ratio 16:10) Single DLP ® chip (0.55", Aspect ratio 4:3) Single DLP ® chip (0.65", Aspect ratio 16:10) Single DLP ® chip (0.65", A ...

  • NEC V302H - page 95

    88 English ... Appendices Electrical NP-V302X NP-V302W NP-V332X NP-V332W NP-V302H Inputs 1 x VGA and Y/Pb/Pr, 2 x HDMI *4 (Standard HDMI connector), 1 x VGA Audio (Stereo mini jack), 1 x Composite Video (RCA (yellow)), 2 x Composite Audio (RCA for both left and right) 1 x VGA and Y/Pb/Pr, 2 x HDMI *4 (Standard HDMI connector and one with MHL functi ...

  • NEC V302H - page 96

    89 ... English Appendices *4 HDMI ® (Deep Color, Lip Sync) with HDCP What is HDCP/HDCP technology? HDCP is an acronym for High-bandwidth Digital Content Protection. High bandwidth Digital Content Protection (HDCP) is a system for preventing il- legal copying of video data sent over a High-Denition Multimedia Interface (HDMI). If you are unable ...

  • NEC V302H - page 97

    90 English ... Appendices Mechanical NP-V302X NP-V302W NP-V332X NP-V332W NP-V302H Installation Orientation Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear Dimensions 12.8"(W) x 3.5" (H) X 9.3" (D) / 324 mm (W) x 88 mm (H) x 237 mm (D) (not including protrusions) Weight 2.7 kg/6.0lbs 2.8 kg/6.2lbs 2.9 kg/6.4lbs Enviro nmenta ...

  • NEC V302H - page 98

    91 ... English Appendices Compatibility Modes Modes Resolution (dots) V.Frequency [Hz] H.Frequency [KHz] VGA 640x480 60 31.47 VGA 640x480 72 37.86 VGA 640x480 75 37.5 VGA 640x480 85 43.27 SVGA 800x600 56 35.2 SVGA 800x600 60 37.88 SVGA 800x600 72 48.08 SVGA 800x600 75 46.88 SVGA 800x600 85 53.67 XGA 1024x768 60 48.36 XGA 1024x768 70 56.48 XGA 1024x ...

  • NEC V302H - page 99

    92 English ... Appendices (2) VGA Analog - Extended Wide timing Modes Resolution (dots) V.Frequency [Hz] H.Frequency [KHz] HD 1280x720 60 44.8 WXGA 1280x768 60 47.78 WXGA 1280x768 75 60.29 WXGA 1280x768 85 68.63 WXGA 1280x800 60 49.6 WXGA 1366x768 60 47.71 WXGA+ 1440x900 60 55.9 WSXGA 1680x1050 60 65.3 Full HD 1920x1080 60 67.5 WUXGA 1920x1200 60 7 ...

  • NEC V302H - page 100

    93 ... English Appendices Signal Resolution (dots) Aspect Ratio Refresh Rate [Hz] VGA 640x480 4:3 59.94/60 SVGA 800x600 4:3 60 XGA 1024x768 *1 4:3 60 XGA 1280x768 15:9 60 WXGA 1280x800 *2 16:10 60 WXGA 1366x768 *4 16:9 60 SXGA 1280x1024 5:4 60 SXGA+ 1400x1050 4:3 60 WXGA+ 1440x900 16:10 60 WXGA++ 1600x900 16:9 60 WSXGA+ 1680x1050 16:10 60 UXGA 1600 ...

  • NEC V302H - page 101

    94 English ... Appendices (1) HDMI - 3D Timing Signal Resolution (dots) Aspect Ratio Refresh Rate [Hz] For PC Signal XGA 1024x768 *1 4:3 60/120 *5 1280x720 1280x720 16:9 60/120 RB *5 WXGA 1280x800 *2 16:10 60/120 RB *5 Full HD 1920x1080 *3 16:9 60 For Video Signal SDTV (480i) 720x480 4:3/16:9 60 For HDMI 3D 720p (Frame Packing) 1280x720 16:9 50/60/ ...

  • NEC V302H - page 102

    95 ... English Appendices TIP: • An image with higher or lower resolution than the projector’s native resolution will be displayed with scaling technology. • Sync on Green and Composite sync signals are not supported. • Signals other than those specied in the table above may not be displayed correctly. If this should happen, change the r ...

  • NEC V302H - page 103

    96 English ... Appendices 130,00 (5,12”) 219,00 (8,62”) 96,00 (3,78”) 79,00 (3,11”) 59,00 (2,32”) 116,00 (4,57”) 84,00 (3,31”) 142,00 (5,59”) 142,00 (5,59”) 37,00 (1,46”) 150,00 (5,91”) 4-M4*L8 (Max) for Ceiling Mount 57,89 (2,28”) Please note that damage resulting from incorrect installation will invalidate the warranty. Ce ...

  • NEC V302H - page 104

    97 ... English Appendices Cabinet Dimensions 103,00 (4,06”) 59,00 (2,32”) 324,00 (12,76”) 250,00 (9,84”) 43,41 (1,71”) 57,89 (2,28”) 91,50 (3.60”) 88,00 (3,46”) 9,80 (0,39”) Unit: mm (inch) ...

  • NEC V302H - page 105

    98 English ... Appendices Pin Assignments of D-Sub COMPUTER Input Connector Mini D-Sub 15 Pin Connector 1 2 3 4 5 11 12 13 14 15 6 7 8 9 10 Signal Level Video signal : 0.7Vp-p (Analog) Sync signal : TTL level Pin No. RGB Signal (Analog) YCbCr Signal 1 Red Cr 2 Green Y 3 Blue Cb 4 Ground 5 Ground 6 Red Ground Cr Ground 7 Green Gro Y Ground 8 Blue Gr ...

  • NEC V302H - page 106

    99 ... English Appendices PC Control Codes and Cable Connection PC Control Codes Function Code Data POWER ON 02H 00H 00H 00H 00H 02H POWER OFF 02H 01H 00H 00H 00H 03H INPUT SELECT COMPUTER 02H 03H 00H 00H 02H 01H 01H 09H INPUT SELECT HDMI 1 02H 03H 00H 00H 02H 01H A1H A9H INPUT SELECT HDMI 2 02H 03H 00H 00H 02H 01H A2H AAH INPUT SELECT VIDEO 02H 03 ...

  • NEC V302H - page 107

    Power   Nopower(POWERindicatordoesnotlightgreen).    Powercable'splugisfullyinsertedintothewalloutlet.    Lampcoverisinstalledcorrectly.    LampHoursUsed(lampoperationhours)wasclearedafter lampreplacement.    No? ...

  • NEC V302H - page 108

    In the space below please describe your problem in detail. Information on application and environment where your projector is used Projector Modelnumber: SerialNo.: Dateofpurchase: Lampoperatingtime(hours): EcoMode: Off Eco Informationoninputsignal: Horizontalsynchfrequency [ ]kHz Verti ...

  • NEC V302H - page 109

    REGISTER YOUR PROJECTOR! (for residents in the United States, Canada, and Mexico) Please take time to register your new projector. This will activate your lim- ited parts and labor warranty and InstaCare service program. Visit our web site at www.necdisplay.com , click on support center/register product and submit your completed form online. Upon r ...

  • NEC V302H - page 110

    NEC Display Solutions, Ltd. 2015 7N952171 ...

Manufacturer NEC Category Video projector

Documents that we receive from a manufacturer of a NEC V302H can be divided into several groups. They are, among others:
- NEC technical drawings
- V302H manuals
- NEC product data sheets
- information booklets
- or energy labels NEC V302H
All of them are important, but the most important information from the point of view of use of the device are in the user manual NEC V302H.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals NEC V302H, service manual, brief instructions and user manuals NEC V302H. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product NEC V302H.

Similar manuals

A complete manual for the device NEC V302H, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use NEC V302H by users. Manuals are usually written by a technical writer, but in a language understandable to all users of NEC V302H.

A complete NEC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual NEC V302H - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the NEC V302H, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the NEC V302H, that we can find in the current document
3. Tips how to use the basic functions of the device NEC V302H - which should help us in our first steps of using NEC V302H
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with NEC V302H
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of NEC V302H in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning NEC V302H?

Use the form below

If you did not solve your problem by using a manual NEC V302H, ask a question using the form below. If a user had a similar problem with NEC V302H it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)