English dropdown-ico

Manual ZyXEL Communications Omni 56K II

88 pages 0.74 mb
Download

Go to site of 88

Summary
  • ZyXEL Communications Omni 56K II - page 1

    Omni 56K II and Omni 56K Plus II Voice/Fax/Data Modem User's Guide Version 1.0 August 2002 ...

  • ZyXEL Communications Omni 56K II - page 2

    Omni 56K II and Omni 56K Plus II User’s Guide i i C o p y r i g h t Copyright Copyright (c) 2002 by ZyXEL Comm unications Corporation . The contents of this publicat ion may not be reproduced in any part or a s a whole, tra nscribed, stored i n a retrieval system, translated into any langu age, or tr ansmitted in any form or by any means, electro ...

  • ZyXEL Communications Omni 56K II - page 3

    Omni 56K II and Omni 56K Plus II User’s Guide Warranty iii ZyXEL Limited W arranty ZyXEL warrants to the original end us er (purchaser) that this product is free from any defects in materials or workmanshi p for a peri od of up t o two years fr om the date of purchase. During the warranty pe riod, and u pon proof of purchase, should the product h ...

  • ZyXEL Communications Omni 56K II - page 4

    Omni 56K II and Omni 56K Plus II User’s Guide iv Customer Support Customer Support Please have th e following inf ormation re ady when you cont act customer support. • Product model and serial num ber. • Warranty Information. • Date that you received your device. • Brief descri ption of the problem and the steps yo u took to sol ve it. ME ...

  • ZyXEL Communications Omni 56K II - page 5

    Omni 56K II and Omni 56K Plus II User’s Guide Table of Contents v T able of Content s Copyright ...................................................................................................................... .....................................ii ZyXEL Limite d Warranty ..................................................................... ...

  • ZyXEL Communications Omni 56K II - page 6

    Omni 56K II and Omni 56K Plus II User’s Guide vi Table of Contents 3.5 Om ni 56K II and Omni 56 K Plus II Ca pability .............................................................................. 3-4 3.6 Data F unction.................................................................................................................. .............. ...

  • ZyXEL Communications Omni 56K II - page 7

    Omni 56K II and Omni 56K Plus II User’s Guide Table of Contents vii Index ................................................................................................................................................................. A ...

  • ZyXEL Communications Omni 56K II - page 8

    Omni 56K II and Omni 56K Plus II User’s Guide viii List of Figures List of Figures Figure 2-1 Omni 56K Plus II Rear Panel a nd Connec tions ......................................................................... ... 2-2 Figure 2-2 Windows 98 Ad d New Hardware Wizard................................................................................ ...

  • ZyXEL Communications Omni 56K II - page 9

    Omni 56K II and Omni 56K Plus II User’s Guide List of Tables ix List of T ables Table 2-1 Front Panel LE DS For Omni 56K Plus II ................................................................................ ...... 2-1 Table 2-2 Front Panel LE Ds for Om ni 56K II .................................................................................. ...

  • ZyXEL Communications Omni 56K II - page 10

    Omni 56K II and Omni 56K Plus II User’s Guide x L i s t o f T a b l e s Table 5-14 Voice Shie lde d DTE Re sponses ........................................................................................ ......... 5-24 Table 5-15 Basic S- Register s "ATSn=x" ............................................................................... ...

  • ZyXEL Communications Omni 56K II - page 11

    Omni 56K II and Omni 56K Plus II User’s Guide Preface xi Preface Thank you f or purchasi ng the ZyXEL Omni 56K II /Omni 56 K Plus II m odem. Register your modem online at www.z yxel.com for free futur e product up dates and information. About This User's Guid e This manual is designed to guide you through the installation an d configuration ...

  • ZyXEL Communications Omni 56K II - page 12

    ...

  • ZyXEL Communications Omni 56K II - page 13

    Omni 56K II and Omni 56K Plus II User’s Guide Getting to Know Your Modem 1-1 Chapter 1 Getting To Know Your Modem This chapter introduces you to the features and specifications for the ZyXEL Omni 56K II and Omni 56K Plus II modems. 1.1 The Omni 56K II and Omni 56K Plus II Modem The Omni 56K II and Om ni 56K Plus II are analog Data/Fax/Voice modem ...

  • ZyXEL Communications Omni 56K II - page 14

    Omni 56K II and Omni 56K Plus II User’s Guide 1-2 Getting to Know Your Modem Hot-swapp able with Other USB Devices (Omni 56K Plus II) The USB opti on allows y ou to sim ply plug in or disconnect you r modem wi thout the nee d for lengt hy computer restarts. This timesaving benefit simplifies th e instal lation process as well as providi ng a quic ...

  • ZyXEL Communications Omni 56K II - page 15

    Omni 56K II and Omni 56K Plus II User’s Guide Getting to Know Your Modem 1-3 Flash ROM Upgradeable ZyXEL has a poli cy of free dist ribution of new firm ware when it bec omes available. You can dow nload the updated firmware f rom www. zyxel.com and install it in your modems. ...

  • ZyXEL Communications Omni 56K II - page 16

    ...

  • ZyXEL Communications Omni 56K II - page 17

    Omni 56K II and Omni 56K Plus II User’s Guide Installation 2-1 Chapter 2 Installation This chapter guides you through the in stallation process for your modem. 2.1 Panel Descriptions 2.1.1 Front Panel LEDs The descriptions of the front panel LEDs are listed below: Table 2-1 Front Panel LEDS For Omni 56K Plus II LED FUNCTION STATUS DESCRIPTION USB ...

  • ZyXEL Communications Omni 56K II - page 18

    Omni 56K II and Omni 56K Plus II User’s Guide 2-2 Installation 2.1.2 Back Panel Table 2-3 Back Panel Description LABEL DESCRIPTION ON/OFF The power switch for the modem. AC IN This receptacle is the power input socket and is used to pl ug the power adapter into the modem. RS-232 This serial port DB-9 female conn ector is used to plug the RS-232 c ...

  • ZyXEL Communications Omni 56K II - page 19

    Omni 56K II and Omni 56K Plus II User’s Guide Installation 2-3 The rear panel for the Omni 56K Plus II is id entical to the r ear panel of th e Omni 56K Pl us II, except t hat the Omni 56K II does not ha ve the USB port. 2.2 Connecting Y our Omni 56K II (RS-232 Port) Step 1. Connect your modem to your analog phone or fax. Step 2. Use the phone co ...

  • ZyXEL Communications Omni 56K II - page 20

    Omni 56K II and Omni 56K Plus II User’s Guide 2-4 Installation Figure 2-2 Windows 98 Add New Hardware Wizard ...

  • ZyXEL Communications Omni 56K II - page 21

    Omni 56K II and Omni 56K Plus II User’s Guide Installation 2-5 Figure 2-3 Windows Me Add New Hardware Wizard Figure 2-4 Windows 2000 Found Ne w Hard ware Wizard ...

  • ZyXEL Communications Omni 56K II - page 22

    Omni 56K II and Omni 56K Plus II User’s Guide 2-6 Installation Figure 2-5 Windows XP Hardware Update Wizard Click Ye s or Continue Anyway if a w arning screen appears. Restart your c omputer i f prompted. If Windows does not automatically detect your modem, make sure that the m ode m is connected and t urned on. Then re start your c omputer or us ...

  • ZyXEL Communications Omni 56K II - page 23

    Omni 56K II and Omni 56K Plus II User’s Guide Installation 2-7 2.3 Connecting Y our Omni 56K Plus II (USB Port) Step 1. Connect your modem to your analog phone or fax. Step 2. Use the phone cord includ ed to connect to the ph one jack on the wall. Step 3. Plug one end of your USB cable to you r modem and t he other en d to your com puter's U ...

  • ZyXEL Communications Omni 56K II - page 24

    Omni 56K II and Omni 56K Plus II User’s Guide 2-8 Installation Figure 2-7 Windows Me Add New Hardware Wizard Figure 2-8 Windows 2000 Upgrade Dev ice Driver Wizard ...

  • ZyXEL Communications Omni 56K II - page 25

    Omni 56K II and Omni 56K Plus II User’s Guide Installation 2-9 Figure 2-9 Windows XP Hardware Update Wizard Click Ye s or Continue Anyway if a w arning screen appears. Restart your c omputer i f prompted. If Windows does not automatically detect your modem, make sure that the m ode m is connected and t urned on. Unplu g the USB c able and pl ug i ...

  • ZyXEL Communications Omni 56K II - page 26

    Omni 56K II and Omni 56K Plus II User’s Guide 2-10 Installation 2.4 TCP/IP Setup 2.4.1 Inst alling TCP/IP in Windows 95/98/Me Click Start , Setting s, Control Pa nel and double -click the Network icon. C lick Add in the Netw ork window Configuration tab. Select Protocol and then click Add . Select Microsoft from the list of manufacturers. Select ...

  • ZyXEL Communications Omni 56K II - page 27

    Omni 56K II and Omni 56K Plus II User’s Guide Installation 2-11 Click OK to close the Netwo rk window. Restart your computer if pro mpted. Insert the W indows CD if prompted. 2.5 Dial-Up Networking Fill in the wizard screens with information from your ISP to create a new dial-up connection. Windows 98 : Click Start , Programs , Accessories , Comm ...

  • ZyXEL Communications Omni 56K II - page 28

    ...

  • ZyXEL Communications Omni 56K II - page 29

    Omni 56K II and Omni 56K Plus II User’s Guide Specifications and Functions 3-1 Chapter 3 Specifications & Functions This chapter introduces the specifications and functions of the Omni 56K II and Omni 56K Plus II modems. This chapter a nd the next three chapte rs are designe d for adva nced users wh o might nee d more inform ation about the O ...

  • ZyXEL Communications Omni 56K II - page 30

    Omni 56K II and Omni 56K Plus II User’s Guide 3-2 Specifications and Functions V.22bis 2.4 Kbps V.22/Bell 212A 1.2K bps V.21/Bell 103 300 bps Auto Fallback/Forw ard LINK LAYER MNP 3-4 MNP 5 V42 V42bis V42 SREJ V44 FLOW CONTROL Hardware flow control: RTS/CT S Software flow control: XON/XOFF COMMAND SET Full AT command set Dialing type: DTMF/Pulse ...

  • ZyXEL Communications Omni 56K II - page 31

    Omni 56K II and Omni 56K Plus II User’s Guide Specifications and Functions 3-3 . ITU-T V. 22bis/V.22 . ITU-T V. 21 . ITU-T V. 23 . Bell 212A . Bell 103  Fax Physical Layer . ITU-T V. 17 . ITU-T V. 29 . ITU-T V. 27ter . ITU-T V. 21  Error Control an d Data Compre ssion . ITU-T V. 44 . ITU-T V. 42 . ITU-T V.42 bis . MNP3-5  Command Se ts . ...

  • ZyXEL Communications Omni 56K II - page 32

    Omni 56K II and Omni 56K Plus II User’s Guide 3-4 Specifications and Functions 3.5 Omni 56K II and Omni 56K Plus II Cap ability The data/fax/ voice feature of Omni 56 K II and Om ni 56K Plus II is descr ibed below: Table 3-3 Feature Descri ption FEATURE DESCRIPTION Data 2W Dial-Up Line Multi-auto/V.92/V.90/V. 34bis/ V.34/V.32bis/V.32/ V.22bis/V.2 ...

  • ZyXEL Communications Omni 56K II - page 33

    Omni 56K II and Omni 56K Plus II User’s Guide Specifications and Functions 3-5 STA NDA RD BIT RA TE [B PS] BA UD RA TE [BAUD] MODULATION CARRIER FREQUENCY [HZ] V.34bis/V.34 2400-33600 multiple TCM multiple V.32bis 14400 2400 128-TCM 1800 V.32bis 12000 2400 64-TCM 1800 V.32bis 7200 2400 16-TCM 1800 V.32 9600 240 0 32-TCM 180 0 V.32 uncoded 9600 24 ...

  • ZyXEL Communications Omni 56K II - page 34

    Omni 56K II and Omni 56K Plus II User’s Guide 3-6 Specifications and Functions 3.9 Sof tware XON/XOFF Flow Control This is a bi-directiona l flow control. XON and XOFF ch aracter defaults are decim als 17 and 19. These can be changed by modifying the S-Registers S31 and S32.Bo th the modem and the DTE will treat XOFF as a signal to stop transmitt ...

  • ZyXEL Communications Omni 56K II - page 35

    Omni 56K II and Omni 56K Plus II User’s Guide Specifications and Functions 3-7 3.14 Caller Number Delivery (Caller ID) Caller Number Delivery (CND), commonly called Caller ID, is a feature that m ay be offered by your local phone company. Check your phone company for availab ility. You must subscribe to it an d usually pay an additional monthly s ...

  • ZyXEL Communications Omni 56K II - page 36

    Omni 56K II and Omni 56K Plus II User’s Guide 3-8 Specifications and Functions RING In the multiple message format, if the caller's number and name are available, the ring message will display both: RING TIME: MM-DD hh:mm CALLER NUMBER: <Caller_ID> CALLER NAME: <Caller_Name> RING Here is an exam ple: RING TIME: 04-28 12:30 CALLER ...

  • ZyXEL Communications Omni 56K II - page 37

    Omni 56K II and Omni 56K Plus II User’s Guide Specifications and Functions 3-9 Setting S48.0=1 will cause the modem to report CND in form ation in its ASCII coded hexadecimal raw data format. The DTE s oftware is res ponsibl e for explaini ng the data. Please refer to the Bellcore T echnical Advisory document TR-NWT -000030 for the exact dat a fo ...

  • ZyXEL Communications Omni 56K II - page 38

    Omni 56K II and Omni 56K Plus II User’s Guide 3-10 Specifications and Function s TYPE BIT (ON) RING SEQUENCE 3 5 0.4s on, 0.2s off, 0.4s on, 0.2s off, 0.8s on; 4s off 4 6 0.3s on, 0.2s off, 1s on, 0.2s off, 0.3s on; 4s off 3.16 Security Function The Omni 56 K II and Om ni 56K Plus II modem s provide a security functi on, which (when enable d) pre ...

  • ZyXEL Communications Omni 56K II - page 39

    Omni 56K II and Omni 56K Plus II User’s Guide Specifications and Functions 3-11 Verify (Ent er the new s upervisor pas sword again ) ******** OK The comm and AT*Hn modi fies the nth user password and the super visor passw ord on the scree n for viewing. Agai n, the m odem prom pts you enter t he superv isor passwor d first. The comm ands below en ...

  • ZyXEL Communications Omni 56K II - page 40

    Omni 56K II and Omni 56K Plus II User’s Guide 3-12 Specifications and Function s 3.17 Fax function 3.17.1 Fax Physical Layer Protocol Table 3-7 Fax Physical Layer Capacity STA NDA RD BIT RA TE [B PS] BA UD RA TE [BAUD] MODULATION CARRIER FREQUENCY [HZ] V.17 14400-7200 2400 TCM 1800 V.29 9600-4800 240 0 QAM/DPSK 1700 V.27ter 4800-2400 160 0/1200 P ...

  • ZyXEL Communications Omni 56K II - page 41

    Omni 56K II and Omni 56K Plus II User’s Guide Specifications and Functions 3-13 3.18.2 4-bit V oice Data Compression The main issue in the digitized voice mode is the amount of storage required . A relatively simple ADPCM algorithm can reduce the speech data rate to half the rate and maintain about the same voice quality. Th is algorithm can also ...

  • ZyXEL Communications Omni 56K II - page 42

    ...

  • ZyXEL Communications Omni 56K II - page 43

    Omni 56K II and Omni 56K Plus II User’s Guide Result Codes 4-1 Chapter 4 Result Codes This chapter details the command responses for the Omni 56K II and Omni 56K Plus II modems. 4.1 Result Codes The result code is the command response or the Connect message to the DTE. The format of the result code is dependent on the Xn and Vn comman ds. The lis ...

  • ZyXEL Communications Omni 56K II - page 44

    Omni 56K II and Omni 56K Plus II User’s Guide 4 - 2 R e s u l t C o d e s RESULT CODE FOR ATV0 ATV1 X0 X1 X2 X3 X4 X5 X6 X7 16 CONNECT 12000 ● ● ● ● ╬ ╬ ╬ 17 CONNECT 14400 ● ● ● ● ╬ ╬ ╬ 18 CONNECT 16800 ● ● ● ● ╬ ╬ ╬ 19 CONNECT 38400 ● ● ● ● ╬ 20 CONNECT 57600 ● ● ● ● ╬ 21 CONNECT 7680 ...

  • ZyXEL Communications Omni 56K II - page 45

    Omni 56K II and Omni 56K Plus II User’s Guide Result Codes 4-3 RESULT CODE FOR ATV0 ATV1 X0 X1 X2 X3 X4 X5 X6 X7 41 42 CONNECT 24000 CONNECT21600 ● ● ● ● ╬ ╬ ╬ 100 CONNECT 56000 ● ● ● ● ╬ ╬ ╬ 101 CONNECT 54666 ● ● ● ● ╬ ╬ ╬ 102 CONNECT 53333 ● ● ● ● ╬ ╬ ╬ 103 CONNECT 52000 ● ● ● ● ? ...

  • ZyXEL Communications Omni 56K II - page 46

    Omni 56K II and Omni 56K Plus II User’s Guide 4 - 4 R e s u l t C o d e s Note: If error control result codes are enabled (X4, X5, X6, X7), the resulting message will be fo rmatted as: X4: CARRIER Rx Rate. PROTOCOL: Error Control Level COMPRESSION: Compression Level CONNECT DTE Speed X5: CONNECT DTE Speed/Protocol Rx Rate/Error control l evel X6: ...

  • ZyXEL Communications Omni 56K II - page 47

    Omni 56K II and Omni 56K Plus II User’s Guide Command Sets 5-1 Chapter 5 Command Sets This chapter lists the command sets that the Omni 56K II and Omni 56K Plus II modems support. These commands include data command sets, fax command sets and voice command sets. 5.1 Dat a command set s 5.1.1 Basic A T Command Set s Table 5-1 Basic AT Command Sets ...

  • ZyXEL Communications Omni 56K II - page 48

    Omni 56K II and Omni 56K Plus II User’s Guide 5-2 Command Sets COMMAND OPTIONS FUNCTION & DESCRIPTION REF. Dials (numbers and options) t hat follow (see also S38.0, S35.4). The opti ons of s are listed as follows: 0-9, A, B,C,D #, * Digits for dialing P Pulse dialing S23.1 T Tone dialing S23.1 , Pause for a time specified in S8. Remaining d i ...

  • ZyXEL Communications Omni 56K II - page 49

    Omni 56K II and Omni 56K Plus II User’s Guide Command Sets 5-3 COMMAND OPTIONS FUNCTION & DESCRIPTION REF. I2 Displays the modem link status report. I12 Displays the physical layer st atus. I13 Displays the channel respons e for V.34 Ln n=0-7 4 * Speak er volume contro l. The higher the va lue, the higher the volume. S24.4-6 Speaker control S ...

  • ZyXEL Communications Omni 56K II - page 50

    Omni 56K II and Omni 56K Plus II User’s Guide 5-4 Command Sets COMMAND OPTIONS FUNCTION & DESCRIPTION REF. V1 * Displays the result code in verbose form. Xn n=0-7 5 * Result code options, see T able 4-1. S23.3-5 n=0-2 Resets the modem and set p ower-on profile. S15.5-7 Zn Resets the modem and load user profile n ( 0-1). Zn Z2 Resets the modem ...

  • ZyXEL Communications Omni 56K II - page 51

    Omni 56K II and Omni 56K Plus II User’s Guide Command Sets 5-5 COMMAND OPTIONS FUNCTION & DESCRIPTION REF. Guard tone options S28.4-5 &G0 * No guard ton e (within USA, Canada). &Gn &G2 1800 Hz guard tone. Data flow control, DTE/DCE. S27.3-5 &H0 Flow control disabled. &H3 * Hardware (CTS/RTS) flow control. &Hn &H4 S ...

  • ZyXEL Communications Omni 56K II - page 52

    Omni 56K II and Omni 56K Plus II User’s Guide 5-6 Command Sets COMMAND OPTIONS FUNCTION & DESCRIPTION REF. &N18 V.32bis 12000/9600/72 00/4800 &N19 V.32bis 7200/4800 &N24 BELL 212A 1200 &N25 BELL 103 300 &N60 V.34 33600 &N61 V.34 31200 &N62 V.34 28800 &N63 V.34 26400 &N64 V.34 24000 &N65 V.34 21600 & ...

  • ZyXEL Communications Omni 56K II - page 53

    Omni 56K II and Omni 56K Plus II User’s Guide Command Sets 5-7 COMMAND OPTIONS FUNCTION & DESCRIPTION REF. &N90 V.90 40000 &N89 V.90 41333 &N88 V.90 42666 &N87 V.90 44000 &N86 V.90 45333 &N85 V.90 46666 &N84 V.90 48000 &N83 V.90 49333 &N82 V.90 50666 &N81 V.90 52000 &N80 V.90 53333 &N79 V.90 546 ...

  • ZyXEL Communications Omni 56K II - page 54

    Omni 56K II and Omni 56K Plus II User’s Guide 5-8 Command Sets COMMAND OPTIONS FUNCTION & DESCRIPTION REF. &T4 Grant a Remot e Digital Loop-back req uest from a remote modem. S14.1 &T5 Den y a Remote Digital Loop- back request from a remote modem. S14.1 &T6 Initiate a Rem ote Digit al Loop-back (RD L) test. &T7 Initiate a Rem ...

  • ZyXEL Communications Omni 56K II - page 55

    Omni 56K II and Omni 56K Plus II User’s Guide Command Sets 5-9 5.1.3 Extended A T* Command Set s Table 5-4 Extended AT* Command Sets COMMAND OPTIONS FUNCTION & DESCRIPTION REF. Character length, including start, stop and parit y bit. S15.3-4 *C0 * 10-bit character length *C1 11-bit character length *C2 9-bit character length *Cn *C3 8-bit cha ...

  • ZyXEL Communications Omni 56K II - page 56

    Omni 56K II and Omni 56K Plus II User’s Guide 5-10 Command Sets COMMAND OPTIONS FUNCTION & DESCRIPTION REF. Note: The command *Gn requests supervis or password checking. 1. In security type 1, the remote site must be a ZyXEL mode m. 2. In security type 2, the remote site can be any other t ype of modem. 3. The modem can store 4 (0-3) telephon ...

  • ZyXEL Communications Omni 56K II - page 57

    Omni 56K II and Omni 56K Plus II User’s Guide Command Sets 5-11 5.2 Fax Command Set s 5.2.1 Service Class 1 Commands Table 5-6 Service Class 1 Commands COMMAND DESCRIPTION VALUE +FCLASS=n Service Class Ident ification and Control n= 0:Sets to modem mode n=1:Sets to Class 1 mode n=2.0:Sets to Class 2.0 mode n=8:Sets to Voice mode +FTS=n Stops data ...

  • ZyXEL Communications Omni 56K II - page 58

    Omni 56K II and Omni 56K Plus II User’s Guide 5-12 Command Sets 122 V.17 short train 120 00 145 V.17 14400 146 V.17 short train 144 00 ...

  • ZyXEL Communications Omni 56K II - page 59

    Omni 56K II and Omni 56K Plus II User’s Guide Command Sets 5-13 5.2.2 Service Class 2 Commands The followin g Class 2 com mands are support ed and im plemented a s per TIA PN 2388 (8/20/ 90): Table 5-8 Service Class 2 Command Syntax COMMAND SYNTAX DESCRIPTION +<command>=<value> Execute a command or set a parameter. +<command>=? ...

  • ZyXEL Communications Omni 56K II - page 60

    Omni 56K II and Omni 56K Plus II User’s Guide 5-14 Command Sets COMMAND DESCRIPTION V ALUE Only check 1D phase C data. n=1 Check both 1D and 2D phase C data. n=2 +FCR= n "Capabilit y to receive" param eter. DCE will not receive message data or poll a r emote device. n=0 DCE receives message data or pol ls a remote device. n=1 +FDCC= vr, ...

  • ZyXEL Communications Omni 56K II - page 61

    Omni 56K II and Omni 56K Plus II User’s Guide Command Sets 5-15 COMMAND DESCRIPTION V ALUE Minimum scan time/line: 10 ms (normal); 5 ms (fine). st=2 Minimum scan time/line: 10 ms. st=3 Minimum scan time/line: 20 ms (normal); 10ms (fine). st=4 Minimum scan time/line: 20 ms. st=5 Minimum scan time/line: 40 ms (normal); 20ms (fine). st=6 Minimum sca ...

  • ZyXEL Communications Omni 56K II - page 62

    Omni 56K II and Omni 56K Plus II User’s Guide 5-16 Command Sets COMMAND DESCRIPTION V ALUE Indicates that a document is available for poll ing. n=1 +FMDL? Request the DCE model. +FMFR? Request the DCE manufacturer. +FMINSP= n Minimum phase C spee d parameter. 2400 bps. n=0 4800 bps. n=1 7200 bps. n=2 9600 bps. n=3 12000 bps. n=4 14400 bps. n=5 +F ...

  • ZyXEL Communications Omni 56K II - page 63

    Omni 56K II and Omni 56K Plus II User’s Guide Command Sets 5-17 All other +F commands are not su pported, but the modem will respond OK. In many cases this means "don't care." Table 5-10 Class 2 Command Responses RESPONSE VALUE FUNCTION A ND DESCRIPTION +FCFR Confirmation. +FCIG:"string" Reports the remote ID re sponse CI ...

  • ZyXEL Communications Omni 56K II - page 64

    Omni 56K II and Omni 56K Plus II User’s Guide 5-18 Command Sets RESPONSE VALUE FUNCTION AND DESCRIPTION command. +FTSI:"string" Report the remote ID response TSI. +FVOICE Cha nges to voice response. Class 2 Flow Control Flow control is necessary to match the DTE-DCE d ata rate to the line-signaling rate while transmitting or receiving G ...

  • ZyXEL Communications Omni 56K II - page 65

    Omni 56K II and Omni 56K Plus II User’s Guide Command Sets 5-19 COMMAND DESCRIPTION VALUE Bit Rate br=0:2400 bps br=1:4800 bps br=2:7200 bps br=3:9600 bps br=4:12000 bps br=5:14400 bps Page Width wd=0:1728 pixels in 215mm wd=1:2048 pixels in 255mm wd=2:2432 pixels in 303mm Page Length ln=0:A4;297mm ln=1:B4;364mm ln=2:unlimited length Data Compres ...

  • ZyXEL Communications Omni 56K II - page 66

    Omni 56K II and Omni 56K Plus II User’s Guide 5-20 Command Sets COMMAND DESCRIPTION VALUE +FNR=rpr,tpr,idr,nsr Enable Negotiation Reporting rpr= 0:Receive r parameters are not reported. rpr=1:Receiver parameters ar e reported. tpr= 0:Transmitter parameters are not reported. tpr=1:Transmitter parameters are reported. idr= 0: ID Strings are not rep ...

  • ZyXEL Communications Omni 56K II - page 67

    Omni 56K II and Omni 56K Plus II User’s Guide Command Sets 5-21 COMMAND DESCRIPTION VALUE +FCR=n Capabilit y to Receive n=0: Do not receive message data or poll a remote device. n=1: Receives message data or polls a remote device. +FCQ=<rq>,<tq> Copy Quality disabl e/enable rq= 0:Receive copy qualit y check is disabled. rq=1:Receive c ...

  • ZyXEL Communications Omni 56K II - page 68

    Omni 56K II and Omni 56K Plus II User’s Guide 5-22 Command Sets 5.3 V oice A T Commands Table 5-12 Voice AT Commands COMMAND FUNCTION OPTION DEFAULT DESCRIPTION +FLO Select F low control. 0, 1,2 2 0: NO flow control. 1: (XON/XOFF)Software flow control. 2: (RTS/CTS)Hardware flow control. +VIP Initialize parameters. N/A N/A +VSD=15,70 ( 15*4, 7 sec ...

  • ZyXEL Communications Omni 56K II - page 69

    Omni 56K II and Omni 56K Plus II User’s Guide Command Sets 5-23 COMMAND FUNCTION OPTION DEFAULT DESCRIPTION 2: The DCE is off-hook and is connected to the telephone li ne. Power is also provided to the local phone. The modem is able to record/play through the loc al telephone line. +VRA Ring back goes away timer 0 - 255 70 0 : turns off the timer ...

  • ZyXEL Communications Omni 56K II - page 70

    Omni 56K II and Omni 56K Plus II User’s Guide 5-24 Command Sets COMMAND FUNCTION OPTION DEFAULT DESCRIPTION +VTD Set default duration of DTMF tone. 1-255 100 Unit: 0.01 second. +VIT Inactivity timer. 0-255 70 Unit: 0.1 secon d. 5.4 V oice Shielded DTE Commands Table 5-13 Voice Shielded DTE Commands COMMAND DESCRIPTION <DLE>p Pause, suspend ...

  • ZyXEL Communications Omni 56K II - page 71

    Omni 56K II and Omni 56K Plus II User’s Guide Command Sets 5-25 RESPONSE CODE DESCRIPTION <DLE>u Transmission Buffer Underru n. The DCE reports this code if the DEC’s buffer becomes empty without first receiving a <DLE><ETX> command. <DLE><ETX> End of stream 5.6 S-Register Descriptions In most bit-mapped S-register ...

  • ZyXEL Communications Omni 56K II - page 72

    Omni 56K II and Omni 56K Plus II User’s Guide 5-26 Command Sets COMMAND FUNCTION & DESCRIPTION REF. S11= Sets duration a nd spacing, in milliseconds, o f dialed Touch-T ones. +070 5.6.2 Extended S-Registers "A TSn=x" Table 5-16 Extended S-Registers "ATSn=x" COMMAND BIT DEC HEX FUNCTION AND DESCRIPTION REF. bit dec hex Bit- ...

  • ZyXEL Communications Omni 56K II - page 73

    Omni 56K II and Omni 56K Plus II User’s Guide Command Sets 5-27 COMMAND BIT DEC HEX FUNCTION AND DESCRIPTION REF. 1 1 Analog Loop- back test in progress &T1 3 3 Local Digital Loop- back test in process 6 6 Remote Digital Loop- back test in process 7 7 Remote Digital Loop- back with self-test in process 8 8 Analog Loop- back with self-test in ...

  • ZyXEL Communications Omni 56K II - page 74

    Omni 56K II and Omni 56K Plus II User’s Guide 5-28 Command Sets COMMAND BIT DEC HEX FUNCTION AND DESCRIPTION REF. 11 B 4800 bps 12 C 2400 bps 13 D 1200 bps 14 E 460800 bps 15 F 300 bps 16 10 307 200 bps 17 11 153 600 bps 18 12 102 400 bps 20 14 614 40 bps 21 15 512 00 bps 22 16 624 000 bps 24 18 124 800 bps 25 19 624 00 bps 26 1A 41600 bps 27 1B ...

  • ZyXEL Communications Omni 56K II - page 75

    Omni 56K II and Omni 56K Plus II User’s Guide Command Sets 5-29 COMMAND BIT DEC HEX FUNCTION AND DESCRIPTION REF. 6 6 The speaker is ON after the last digit is dialed out the until carrier is detected. M3 3 0 0 DSR is al ways ON (default). &S0 8 8 According to CCITT (see also S44.4, S41.5). &S1 4 0 0 CD is al ways ON. &C0 16 10 CD tra ...

  • ZyXEL Communications Omni 56K II - page 76

    Omni 56K II and Omni 56K Plus II User’s Guide 5-30 Command Sets COMMAND BIT DEC HEX FUNCTION AND DESCRIPTION REF. 32 20 AT X4 X4 40 28 ATX5, error control result code is enabled (default). X5 48 30 ATX6, error control result code is enabled. X6 56 38 ATX7, error control result code is enabled. X7 6 0 0 Displ ays the result code in numeric format ...

  • ZyXEL Communications Omni 56K II - page 77

    Omni 56K II and Omni 56K Plus II User’s Guide Command Sets 5-31 COMMAND BIT DEC HEX FUNCTION AND DESCRIPTION REF. 40 28 Reserv ed 6-7 Signal qualit y. 0 0 No response to poor signal quality. *Q0 64 40 Retrain action taken if signal qualit y is poor. *Q1 128 80 Adaptive rate (auto fall- back/forward) when signal quality changes (default). *Q2 192 ...

  • ZyXEL Communications Omni 56K II - page 78

    Omni 56K II and Omni 56K Plus II User’s Guide 5-32 Command Sets COMMAND BIT DEC HEX FUNCTION AND DESCRIPTION REF. 7 128 80 Enable extend ed numerical result codes from 50 to 65 when an error corrected connection is made. Use with ATV0 (see result code table). V0 S23.6 bit dec hex Bit-mapped register. +000 0 1 1 Repeatedly dials the default number ...

  • ZyXEL Communications Omni 56K II - page 79

    Omni 56K II and Omni 56K Plus II User’s Guide Command Sets 5-33 COMMAND BIT DEC HEX FUNCTION AND DESCRIPTION REF. 7 128 80 Ignore calling t one, not to be used as fax detection. bit dec hex Bit-mapped register. 1 2 2 Enables throughput averaging. 2 2 4 4 A CND messa ge forces on even if ATQ2 is set. 3 8 8 T his disables the escape seq uence code ...

  • ZyXEL Communications Omni 56K II - page 80

    Omni 56K II and Omni 56K Plus II User’s Guide 5-34 Command Sets COMMAND BIT DEC HEX FUNCTION AND DESCRIPTION REF. 0 to 255 0-FF To process the CND, sil ence must be detect ed for the specified interval, in 20 ms units. bit dec hex Bit-mapped register. +000 0 1 1 T his causes CND information to be reported in ra w format. 2 4 4 T his enables the s ...

  • ZyXEL Communications Omni 56K II - page 81

    Omni 56K II and Omni 56K Plus II User’s Guide Command Sets 5-35 ...

  • ZyXEL Communications Omni 56K II - page 82

    ...

  • ZyXEL Communications Omni 56K II - page 83

    Omni 56K II and Omni 56K Plus II User’s Guide Firmware Upgrade 6-1 Chapter 6 Firmware Upgrade This section describes how you can upgr ade the firmware in your modem. The ZyXEL Om ni 56K II and Omni 56K Plus II provi des a firm ware upgrade function that allows you to upgrade the firmware eith er by upgrade software prov ided in the supplied CD, o ...

  • ZyXEL Communications Omni 56K II - page 84

    Omni 56K II and Omni 56K Plus II User’s Guide 6-2 Firmware Upgrade Are you sur e (Y/N)? Step 3. Be sure you have a new version of firm ware file on hand, then click 'Y.' The terminal will respond: Erase the flash ROM now. Please wait. Then, it will continue to show: Ready to program to flas h. Please start upl oad. Step 4. Now, select X ...

  • ZyXEL Communications Omni 56K II - page 85

    Omni 56K II and Omni 56K Plus II User’s Guide Troubleshooting 7-1 Chapter 7 Troubleshooting This chapter covers potential problems and the possible solutions. Table 7-1 Troubleshooting PROBLEM CORRECTIVE ACTION None of the LEDs turn on when I start the modem. Make sure your modem is turned on and the included po wer adapter is connected to it as ...

  • ZyXEL Communications Omni 56K II - page 86

    Omni 56K II and Omni 56K Plus II User’s Guide 7-2 Troubleshooting PROBLEM CORRECTIVE ACTION I cannot get the software driver to uninstall and reinstall properly. Close your Windo ws applications. Use the add and remove hardware option in the W indows Control Panel to remove the modem. Insert the included CD. If a screen automatically o pens, clos ...

  • ZyXEL Communications Omni 56K II - page 87

    Omni 56K II and Omni 56K Plus II User’s Guide Index A Index < <MOD> paramet ers ........................................ 5-11 4 4-bit Voice Data Compressi on ........................ 3-13 A Automatic Data/Fax call detecti on .................... 1-2 B Back Pane l ....................................................... 2-2 Basic S-Regi st ...

  • ZyXEL Communications Omni 56K II - page 88

    Omni 56K II and Omni 56K Plus II User’s Guide B Index S Security ................................................. 3-10, 3-11 Service Class 1 Commands ............................ 5-11 Service Class 2. 0 Commands ......................... 5-18 Specificat ions .................................................... 3-1 S-Register Desc riptions ...... ...

Manufacturer ZyXEL Communications Category Network Card

Documents that we receive from a manufacturer of a ZyXEL Communications Omni 56K II can be divided into several groups. They are, among others:
- ZyXEL Communications technical drawings
- Omni 56K II manuals
- ZyXEL Communications product data sheets
- information booklets
- or energy labels ZyXEL Communications Omni 56K II
All of them are important, but the most important information from the point of view of use of the device are in the user manual ZyXEL Communications Omni 56K II.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals ZyXEL Communications Omni 56K II, service manual, brief instructions and user manuals ZyXEL Communications Omni 56K II. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product ZyXEL Communications Omni 56K II.

Similar manuals

A complete manual for the device ZyXEL Communications Omni 56K II, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use ZyXEL Communications Omni 56K II by users. Manuals are usually written by a technical writer, but in a language understandable to all users of ZyXEL Communications Omni 56K II.

A complete ZyXEL Communications manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual ZyXEL Communications Omni 56K II - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the ZyXEL Communications Omni 56K II, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the ZyXEL Communications Omni 56K II, that we can find in the current document
3. Tips how to use the basic functions of the device ZyXEL Communications Omni 56K II - which should help us in our first steps of using ZyXEL Communications Omni 56K II
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with ZyXEL Communications Omni 56K II
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of ZyXEL Communications Omni 56K II in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning ZyXEL Communications Omni 56K II?

Use the form below

If you did not solve your problem by using a manual ZyXEL Communications Omni 56K II, ask a question using the form below. If a user had a similar problem with ZyXEL Communications Omni 56K II it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)