English dropdown-ico

Manual Philips TDA8001

24 pages 0.14 mb
Download

Go to site of 24

Summary
  • Philips TDA8001 - page 1

    DA T A SH EET Product specification Supersedes data of 1995 Feb 01 File under Integrated Circuits, IC02 1996 Dec 12 INTEGRA TED CIRCUITS TDA8001 Smart card interface ...

  • Philips TDA8001 - page 2

    1996 Dec 12 2 Philips Semiconductors Product specification Smart card interface TDA8001 FEA TURES • Protected I/O line • V CC regulation (5 V ± 5%, 100 mA max. with controlled rise and fall times) • V PP generation (12.5, 15 or 21 V ± 2.5%, 50 mA max., with controlled rise and fall times) (only at TDA8001 and TDA8001T) • Clock generation ...

  • Philips TDA8001 - page 3

    1996 Dec 12 3 Philips Semiconductors Product specification Smart card interface TDA8001 QUICK REFERENCE DA T A SYMBOL P ARAMETER CONDITIONS MIN. TYP . MAX. UNIT V DD supply voltage 6.7 − 18 V I DD supply current idle mode; V DD =1 2V − 32 − mA active modes; unloaded − 45 − mA V th2 threshold voltage on V SUP 4.5 − 4.72 V V th4 threshol ...

  • Philips TDA8001 - page 4

    1996 Dec 12 4 Philips Semiconductors Product specification Smart card interface TDA8001 BLOCK DIAGRAM Fig.1 Block diagram. handbook, full pagewidth MBH813 PROTECTIONS AND ENABLE MAIN SUPPLY VOLTAGE SUPERVISOR INTERNAL CLOCK LOGIC V CC GENERATOR CLOCK ENABLE CLOCK CIRCUITRY 23 24 2 20 19 26 28 18 17 15 16 13 12 6 7 11 1 14 8 ...

  • Philips TDA8001 - page 5

    1996 Dec 12 5 Philips Semiconductors Product specification Smart card interface TDA8001 PINNING SYMBOL PIN DESCRIPTION TDA8001 TDA8001T TDA8001A TDA8001A T XT AL 1 1 crystal connection DETECT 2 2 card extraction open collector output (active LOW) I/O 3 3 data line to/from the card RST 4 4 card reset output CLK 5 5 clock output to the card VPP12.5 ...

  • Philips TDA8001 - page 6

    1996 Dec 12 6 Philips Semiconductors Product specification Smart card interface TDA8001 Fig.2 Pin configuration. handbook, halfpage TDA8001 TDA8001T MBH811 1 2 3 4 5 6 7 8 9 10 11 12 13 14 28 27 26 25 24 23 22 21 20 19 18 17 16 15 XT AL DETECT I/O RST CLK VPP12.5 VPP15 PRES PRES V PP V DD V CC V H GND1 I/O( µ C) CMD7 or CDMS RSTIN GND2 CLK OUT ...

  • Philips TDA8001 - page 7

    1996 Dec 12 7 Philips Semiconductors Product specification Smart card interface TDA8001 FUNCTIONAL DESCRIPTION Power supply The circuit operates within a supply voltage range of 6.7 to 18 V. V DD and GND are the supply pins. All card contacts remain inactive during power up or down. P OWER UP The logic part is powered first and is in the reset con ...

  • Philips TDA8001 - page 8

    1996 Dec 12 8 Philips Semiconductors Product specification Smart card interface TDA8001 R EAD MODE When the activation sequence is completed and, after the card has replied its Answer-to-Reset, the TDA8001 will be in the READ mode. Data is exchanged between the card and the microcontroller via the I/O line. W RITE MODE Cards with EPROM memory need ...

  • Philips TDA8001 - page 9

    1996 Dec 12 9 Philips Semiconductors Product specification Smart card interface TDA8001 handbook, full pagewidth MGG827 QB QC QD ENCLK QF CLK D CK CMD7 or CDMS = Z Z 1 1 0 0 CMD3.5 or CDMTC = 1 0 1 0 1 0 CLK = 2 4 0 4 2 4 Q Q CLK D CK Q Q D QI QH QD QG QA QAA QF QB QBA QCA QC QE ENCLK 1/2 CLK OUT XT AL CK Q Q S CDMTC S S CDMS S Fig.5 Clock c ...

  • Philips TDA8001 - page 10

    1996 Dec 12 10 Philips Semiconductors Product specification Smart card interface TDA8001 Fig.6 State diagram. handbook, full pagewidth MGG820 F AUL T READ WRITE PDOWN IDLE ACTIV A TION DEACTIV A TION Fig.7 Activation sequence. handbook, full pagewidth MGG828 t 2 t act OFF 01 3 2 PRES DETECT CMD VCC VEILLE (INTERNAL) INTERNAL CLOCK V CC I/O V ...

  • Philips TDA8001 - page 11

    1996 Dec 12 11 Philips Semiconductors Product specification Smart card interface TDA8001 Fig.8 Deactivation sequence. handbook, full pagewidth MGG829 t de CMD VCC 30 1 2 VEILLE (INTERNAL) V CC I/O V PP CMD3.5 CLK ENRST (INTERNAL) RSTIN RST INTERNAL CLOCK Fig.9 Deactivation after a card extraction during write mode. handbook, full pagewidt ...

  • Philips TDA8001 - page 12

    1996 Dec 12 12 Philips Semiconductors Product specification Smart card interface TDA8001 LIMITING V ALUES In accordance with the Absolute Maximum Rating System (IEC 134). Note 1. P tot =V DD × (I DD(unloaded) + ∑ I signals )+I CC × (V DD − V CC ) + max.{(V H − V PP ) × I PP(read) +( V H − V PP ) × I PP(write) } +V H × I H(unloaded) +V ...

  • Philips TDA8001 - page 13

    1996 Dec 12 13 Philips Semiconductors Product specification Smart card interface TDA8001 Fig.10 Power derating curve (DIP28). handbook, halfpage 4 3 1 0 2 MBE256 50 0 50 100 150 P tot (W) T ( C) amb o Fig.11 Power derating curve (SO28). handbook, halfpage 50 3 2 1 0 0 MBE255 50 100 150 P tot (W) T ( C) amb o HANDLING Every pin withstands the ESD t ...

  • Philips TDA8001 - page 14

    1996 Dec 12 14 Philips Semiconductors Product specification Smart card interface TDA8001 CHARACTERISTICS V DD =1 2V ; V H = 25 V ; V SUP =5V ; T amb =2 5 ° C; unless otherwise specified. SYMBOL P ARAMETER CONDITIONS MIN. TYP . MAX. UNIT Supply V DD supply voltage 6.7 − 18 V I DD supply current idle mode; V DD = 8 V 20 30 38 mA idle mode; V DD ...

  • Philips TDA8001 - page 15

    1996 Dec 12 15 Philips Semiconductors Product specification Smart card interface TDA8001 I IH HIGH level input current V IH = 5V −− 10 µ A Reset output to the card (RST) V IDLE output voltage in IDLE −− 0.4 V V OL LOW level output voltage I OL = 200 µ A −− 0.45 V V OH HIGH level output voltage I OH =− 200 µ A 4.3 − V CC V I OH = ...

  • Philips TDA8001 - page 16

    1996 Dec 12 16 Philips Semiconductors Product specification Smart card interface TDA8001 Card supply voltage (V CC ) V CC output voltage idle mode; active mode −− 0.4 V I CC < 100 mA 4.75 − 5.25 V ∆ I PP / ∆ t < 100 mA/100 ns ; note 4 4.75 − 5.25 V I CC output current V CC from 0 to 5 V −− − 100 mA V CC shorted to GND −? ...

  • Philips TDA8001 - page 17

    1996 Dec 12 17 Philips Semiconductors Product specification Smart card interface TDA8001 Notes 1. Pins CMDVCC, VPP21, VPP15, VPP12.5, CMD7, CMD3.5 and PRES are active LOW; pins RSTIN and PRES are active HIGH. 2. The transition time and duty cycle definitions are shown in Fig.12; . 3. P is the card programming voltage set by pin VPP12.5, VPP15 or V ...

  • Philips TDA8001 - page 18

    1996 Dec 12 18 Philips Semiconductors Product specification Smart card interface TDA8001 INTERNAL PIN CONFIGURA TION Fig.13 Internal pin configuration. handbook, full pagewidth MBE257 100 µ A 20 µ A 20 µ A 5310 Ω 4690 Ω V SUP 1.25 V 100 µ A 2.5 V V SUP 2.5 µ A DELAY ALARM V SUP ALARM OFF CMDVCC VPP21 650 Ω 1350 Ω DD V CMD3.5 CVNC CLKO ...

  • Philips TDA8001 - page 19

    1996 Dec 12 19 Philips Semiconductors Product specification Smart card interface TDA8001 APPLICA TION INFORMA TION Fig.14 Application in a pay TV decoder. (1) The capacitor should be placed as close as possible to the IC. (2) If pin V H is not connected to 25 V, it should be connected to V DD . handbook, full pagewidth MGG831  10 µ F 10? ...

  • Philips TDA8001 - page 20

    1996 Dec 12 20 Philips Semiconductors Product specification Smart card interface TDA8001 P ACKAGE OUTLINES UNIT A max. 1 2 b 1 (1) (1) (1) cD E w eM H L REFERENCES OUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC EIAJ mm inches DIMENSIONS (inch dimensions are derived from the original mm dimensions) SOT117-1 92-11-17 95-01-14 A min. A max. ...

  • Philips TDA8001 - page 21

    1996 Dec 12 21 Philips Semiconductors Product specification Smart card interface TDA8001 UNIT A max. A 1 A 2 A 3 b p cD (1) E (1) (1) eH E LL p Q Z y w v θ REFERENCES OUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC EIAJ mm inches 2.65 0.30 0.10 2.45 2.25 0.49 0.36 0.32 0.23 18.1 17.7 7.6 7.4 1.27 10.65 10.00 1.1 1.0 0.9 0.4 8 0 o o 0.25 ...

  • Philips TDA8001 - page 22

    1996 Dec 12 22 Philips Semiconductors Product specification Smart card interface TDA8001 SOLDERING Introduction There is no soldering method that is ideal for all IC packages. Wave soldering is often preferred when through-hole and surface mounted components are mixed on one printed-circuit board. However, wave soldering is not always suitable for ...

  • Philips TDA8001 - page 23

    1996 Dec 12 23 Philips Semiconductors Product specification Smart card interface TDA8001 DEFINITIONS LIFE SUPPORT APPLICA TIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these ...

  • Philips TDA8001 - page 24

    Internet: http://www.semiconductors.philips.com Philips Semiconductors – a worldwide company © Philips Electronics N.V. 1996 SCA52 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or cont ...

Manufacturer Philips Category Network Card

Documents that we receive from a manufacturer of a Philips TDA8001 can be divided into several groups. They are, among others:
- Philips technical drawings
- TDA8001 manuals
- Philips product data sheets
- information booklets
- or energy labels Philips TDA8001
All of them are important, but the most important information from the point of view of use of the device are in the user manual Philips TDA8001.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Philips TDA8001, service manual, brief instructions and user manuals Philips TDA8001. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Philips TDA8001.

Similar manuals

A complete manual for the device Philips TDA8001, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Philips TDA8001 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Philips TDA8001.

A complete Philips manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Philips TDA8001 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Philips TDA8001, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Philips TDA8001, that we can find in the current document
3. Tips how to use the basic functions of the device Philips TDA8001 - which should help us in our first steps of using Philips TDA8001
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Philips TDA8001
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Philips TDA8001 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Philips TDA8001?

Use the form below

If you did not solve your problem by using a manual Philips TDA8001, ask a question using the form below. If a user had a similar problem with Philips TDA8001 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)