English dropdown-ico

Manual Furman SP-20AB

12 pages 0.95 mb
Download

Go to site of 12

Summary
  • Furman SP-20AB - page 1

    SP-20AB MANUAL 0008A 960026-832 ...

  • Furman SP-20AB - page 2

    SP-20AB MANUAL Important Note: T o obtain best results from this Furman Sound electronic product, please be sure to read this manual carefully before using it. Please fi ll out and return the W arranty Registration Card immediately to obtain full protection under the terms of the Limited W arranty , in case your ownership documents are lost. Pleas ...

  • Furman SP-20AB - page 3

    SP-20AB MANUAL The SP-20AB’ s compact size and 20 watts per channel make it ideal for modu lar use in large commercial installations with multiple small speakers. Its power capacity is also just right for driving the small near fi eld monitors used in most recording studios as a comparison with the main control room monitors - it can power them ...

  • Furman SP-20AB - page 4

    SP-20AB MANUAL Descriptions of Controls Front Panel INPUT LEVEL: The Input Level control can be adjusted for maximum signal to noise and minimum clipping. The Input Level control is stereo - it af fects both left and right channels simultaneously and affects all outputs. SIGNAL PRESENT LIGHTS: These yellow LED’s turn on whenever a signal exceedin ...

  • Furman SP-20AB - page 5

    SP-20AB MANUAL contact between chassis, as in a rack with metal rails. Sliding the Ground Lift switch up completely isolates all signal grounds from the chassis, breaking any ground loops. The chassis always remains con nected to the ground pin on the AC cord for safety and to provide shielding against RF interference. T ry both positions of the Gr ...

  • Furman SP-20AB - page 6

    SP-20AB MANUAL two top (red) terminals. In this case, nothing should be connected to the bottom (black) terminals. Positive polarity will be on the left channel (red) terminal. SA TELLITE/REMOTE OUTPUT : This output is a single male XLR connector containing both the left and right channel outputs. It is wired as follows: Pin 3 -left (high); Pin 2 - ...

  • Furman SP-20AB - page 7

    SP-20AB MANUAL Installation For installation as a free-standing unit, attach the four adhesive rubber feet supplied with the SP-20AB to the bottom of its case. With either the HRKIT -1 or the HRKIT -2 adaptor kits the SP-20AB may be mounted in standard 19” equipment racks. The HRKIT -1 is for mounting one SP-20AB in the center of a 19” rack. Th ...

  • Furman SP-20AB - page 8

    SP-20AB MANUAL Limited W arranty Furman Sound, Inc., having its principal place of business at 1997 South McDowell Blvd., Petaluma, CA 94954 (“Manufacturer”) warrants its SP-20AB (the “Product”) as follows: Manufacturer warrants to the original Purchaser of the Product that the Product sold hereunder will be free from defects in material an ...

  • Furman SP-20AB - page 9

    SP-20AB MANUAL 8 Service Before returning any equipment for repair , please be sure that it is adequate ly packed and cushioned against damage in shipment, and that it is insured. We suggest that you save the original packaging and use it to ship the product for servicing. Also, please enclose a note giving your name, address, phone number and a de ...

  • Furman SP-20AB - page 10

    SP-20AB MANUAL SPECIFICA TIONS OUTPUTS: Power: 20 W atts per channel, stereo, into either 4 Ohms or 8 Ohms, or 40 W atts mono into 8 Ohms, 20 Hz to 20 KHz Connectors: Speakers: 5-way binding posts (accommodates dual banana plugs, spade lugs, bare wires, etc.) Remote Headphone: XLR. INPUTS: Input Impedance: 20K Ohms. Sensitivity: -6.5 dBU required f ...

  • Furman SP-20AB - page 11

    SP-20AB MANUAL ...

  • Furman SP-20AB - page 12

    SP-20AB MANUAL 7 Furman Sound, Inc. 1997 South McDowell Blvd. Petaluma, California 94954-6919 USA Phone: 707-763-1010 Fax: 707-763-1310 Web: www .furmansound.com E-mail: info@furmansound.com ...

Manufacturer Furman Category Stereo Amplifier

Documents that we receive from a manufacturer of a Furman SP-20AB can be divided into several groups. They are, among others:
- Furman technical drawings
- SP-20AB manuals
- Furman product data sheets
- information booklets
- or energy labels Furman SP-20AB
All of them are important, but the most important information from the point of view of use of the device are in the user manual Furman SP-20AB.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Furman SP-20AB, service manual, brief instructions and user manuals Furman SP-20AB. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Furman SP-20AB.

Similar manuals

A complete manual for the device Furman SP-20AB, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Furman SP-20AB by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Furman SP-20AB.

A complete Furman manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Furman SP-20AB - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Furman SP-20AB, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Furman SP-20AB, that we can find in the current document
3. Tips how to use the basic functions of the device Furman SP-20AB - which should help us in our first steps of using Furman SP-20AB
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Furman SP-20AB
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Furman SP-20AB in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Furman SP-20AB?

Use the form below

If you did not solve your problem by using a manual Furman SP-20AB, ask a question using the form below. If a user had a similar problem with Furman SP-20AB it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)