Manual SWR Sound 2X10C

16 pages 0.72 mb
Download

Go to site of 16

Summary
  • SWR Sound 2X10C - page 1

    SWR • CORONA, CA • USA W orkingman’s 2X10C OWNER’S MANUAL ...

  • SWR Sound 2X10C - page 2

    2 • WORKINGMAN’S 2X10C INTRODUCTION Congratulations on your purchase of the W orkingman's 2x1 0C Bass Combo Amplifier! Y ou now own the most powerful combo amp in SWR's world-renowned W orkingman's Line of products, a line designed for bassists who expect typical SWR professional quality at affordable prices. In today's crow ...

  • SWR Sound 2X10C - page 3

    WORKINGMAN’S 2X10C • 3 WORKINGMAN'S 2X10C - FRONT PANEL FEATURES • Discrete Solid State Front End • Balanced XLR Output • Tuner Out Jack • High and Low Sensitivity 1/4" Input Jacks • Gain Control with LED peak clipping indicator • Aural Enhancer Control • Bass Level Control • Lo Mid Level Control • Mid Level Control ...

  • SWR Sound 2X10C - page 4

    4 • WORKINGMAN’S 2X10C Cabinet Construction and Features 5/8" 7-ply , Maple or Birch plywood construction, waterproof glue. All joints Dado and Rabbet, glued and nailed. Front Slot P ort designed to eliminate unwanted noise Heavy Duty Removable Casters Heavy Duty Spring Handles Midnight Blue Carpeting with Stack Lock Corners Midnight Blue ...

  • SWR Sound 2X10C - page 5

    WORKINGMAN’S 2X10C • 5 WORKINGMAN'S 2X10C - FRONT PANEL FEATURES BALANCED D.I. (XLR) OUTPUT The Balanced XLR output is a true balanced output. No front panel controls affect its signal. The tone and output levels are controlled only by the instrument plugged into one of the input jacks. T o use this feature, run an XLR cable from the Balan ...

  • SWR Sound 2X10C - page 6

    6 • WORKINGMAN’S 2X10C GAIN CONTROL The Gain control adjusts the volume of the preamp section. Since the Gain control is similar to a "pad," a small amount of sign al will be heard even with the Gain control rotated fully counter-clockwise ("MIN") if the Master V olume is up. After all EQ settings and the Aural Enhancer are ...

  • SWR Sound 2X10C - page 7

    WORKINGMAN’S 2X10C • 7 WORKINGMAN'S 2X10C - 5-BAND GRAPHIC EQ SECTION OVERVIEW Y our W orkingman's 2x1 0C comes equipped with a 5-band graphic equalizer for versatile, active tone shaping in an easy-to-use int er- face. Each of the five bands utilizes a slider control that can cut or boost its designated frequency range by up to 1 5db ...

  • SWR Sound 2X10C - page 8

    8 • WORKINGMAN’S 2X10C EFFECTS BLEND CONTROL The Effects Blend Control "blends" the signal sent from your instrument with the signal coming from an outboard effects unit of your choice. With the Effects Blend fully counter-clockwise ("DRY"), no signal from your outboard effects unit will be heard. As you turn this control cl ...

  • SWR Sound 2X10C - page 9

    WORKINGMAN’S 2X10C • 9 MASTER (VOLUME) CONTROL The Master (meaning "Master V olume") control adjusts the level being sent to the power amplifier in your W orkingman's 2x1 0C − it controls the overall volume of the unit. Turning the control counter-clockwise reduces the overall level, while turning the con trol clock- wise boost ...

  • SWR Sound 2X10C - page 10

    10 • WORKINGMAN’S 2X10C WORKINGMAN'S 2X10C - REAR PANEL FEATURES (chassis and cabinet) EFFECTS LOOP (for outboar d ef fects devices) As mentioned previously in the "Effects Blend Control" section of the manual, the Effects Blend circuit in your W orkingman's 2x 1 0C is similar to that used on recording consoles, with the eff ...

  • SWR Sound 2X10C - page 11

    WORKINGMAN’S 2X10C • 11 NOTE : Inserting a plug into the Effects Receive jack activates the Effects Blend control. The control receives this command through the ground created by the phone plug making contact with the jack. The plug must be a mono plug (tip and ground). If yo u have a stereo plug only, it will be necessary to tie the ring and t ...

  • SWR Sound 2X10C - page 12

    12 • WORKINGMAN’S 2X10C section of the W orkingman's 2x1 0C may occur if speaker enclosures with total impedances less than the minimum loads listed above are connected to the speaker output section. The owner's manual that came with your speaker cabinet should state its tota l impedance. On SWR speaker enclosures, the total impedance ...

  • SWR Sound 2X10C - page 13

    WORKINGMAN’S 2X10C • 13 NOTE : The frequency response of the Workingman's 2x10C is far greater than usually found in musical instrument amplifiers (20 Hz to 40K Hz). This was engineered in order to give the bass player the same punch and clarity on stage as found in the studio o r concert P.A. systems. Therefore, it is doubly important tha ...

  • SWR Sound 2X10C - page 14

    14 • WORKINGMAN’S 2X10C TWEETER MODE SWITCH Also located on the small panel on the rear of the W orkingman's 2x1 0C's speaker cabinet, this three-position switch gives you three different options for operation of the piezo tweeter. In the Full Range (top) position, the tweeter will reproduce an unattenuated sig- nal of ever y frequenc ...

  • SWR Sound 2X10C - page 15

    WORKINGMAN’S 2X10C • 15 ...

  • SWR Sound 2X10C - page 16

    WORKINGMAN’S 2X10C LIMITED WARRANTY The WORKINGMAN’S 2X10C fr om SW R is w ar ranted to the original consumer pur chaser for ONE YEAR fr o m the date of pur chase against defects in materials and workmanship, pr ovided that it is pur chased fr om an Authorized SWR dealer . This war ranty applies only to pr oducts pur chased in the USA or Canada ...

Manufacturer SWR Sound Category Stereo Amplifier

Documents that we receive from a manufacturer of a SWR Sound 2X10C can be divided into several groups. They are, among others:
- SWR Sound technical drawings
- 2X10C manuals
- SWR Sound product data sheets
- information booklets
- or energy labels SWR Sound 2X10C
All of them are important, but the most important information from the point of view of use of the device are in the user manual SWR Sound 2X10C.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals SWR Sound 2X10C, service manual, brief instructions and user manuals SWR Sound 2X10C. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product SWR Sound 2X10C.

Similar manuals

A complete manual for the device SWR Sound 2X10C, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use SWR Sound 2X10C by users. Manuals are usually written by a technical writer, but in a language understandable to all users of SWR Sound 2X10C.

A complete SWR Sound manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual SWR Sound 2X10C - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the SWR Sound 2X10C, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the SWR Sound 2X10C, that we can find in the current document
3. Tips how to use the basic functions of the device SWR Sound 2X10C - which should help us in our first steps of using SWR Sound 2X10C
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with SWR Sound 2X10C
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of SWR Sound 2X10C in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning SWR Sound 2X10C?

Use the form below

If you did not solve your problem by using a manual SWR Sound 2X10C, ask a question using the form below. If a user had a similar problem with SWR Sound 2X10C it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)