English dropdown-ico

Manual Fisher D500243X012

24 pages 0.46 mb
Download

Go to site of 24

Summary
  • Fisher D500243X012 - page 1

    www.Fisher.com D500243X012 Type 1 035/El-O-Matic Rack-and-Pinion R otary A ctuator Contents Introduction 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Scope of Manual 1 . . . . . . . . . . . . . . . . . . . . . . . . . Description 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specifications 2 . . . . . . . . . . . ...

  • Fisher D500243X012 - page 2

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 2 Table 1. Specifications Type 1035 Actuator: Double Acting Spring Return EDA 25 ESA 25 EDA 40 ESA 40 EDA 65 ESA 65 EDA 100 ESA 100 EDA 200 ESA 200 EDA 350 ESA 350 EDA 600 ESA 600 EDA 950 ESA 950 EDA 1600 ESA 1600 PDA 2500 PSA 2505 PDA 4000 PSA 4005 Output Shaft : J Double D insert ...

  • Fisher D500243X012 - page 3

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 3 Table 2 . Performance Characteristics E SERIES ACTUATOR BORE STROKE AVERAGE STROKE FREE AIR VOLUME (2) FREE AIR VOLUME (2) ACTUATOR SIZE mm Inch mm Inch STROKE TIME (SEC) (1) Port ‘‘A’’(liter) Port ‘‘A’’(in 3 ) Port ‘‘B’’(liter) Port ‘‘B’’(in 3 ) E ...

  • Fisher D500243X012 - page 4

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 4 Table 3 . Approximate Weights ACTUATOR kg lbs ACTUATOR SIZE EDA ESA EDA ESA E25 1.2 1.7 2.7 3.7 E40 1.8 2.4 4.0 5.3 E65 2.4 3.6 5.3 7.9 E100 2.8 4.6 6.1 10.1 E200 5.8 9.1 12.8 20.1 E350 10.4 16.9 22.9 37.3 E600 19.4 27.6 42.8 60.8 E900 26.4 38.6 58.2 85.0 E1600 42.7 65.8 94.1 145 ...

  • Fisher D500243X012 - page 5

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 5 be used to mount the actuator to the yoke/mounting actuator. W ARNING Exceeding any torque requirement may impair the safe operation of this actuator by causing broken or damaged parts. Refer to table 4 for bolting torque requirements. The LSP, if used, will also have to be attac ...

  • Fisher D500243X012 - page 6

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 6 1 Figure 3. Mounting Style Codes and Positions (Section 1) E SERIES DOUBLE ACTING ACTUA TOR CODES CODE A ST ANDARD CONSTRUCTION S CODE A V ALVEĆACTUA T OR POSITION IS SHOWN. S ACTUA TOR IS P ARALLEL WITH PIPELINE (TOP VIEW). S AIR A T PORT A ROTA TES PINION GEAR CCW , AND AIR A ...

  • Fisher D500243X012 - page 7

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 7 Figure 3. Mounting Style Codes and Positions (Section 2) E SERIES SPRING RETURN ACTUA TOR CODES CODE A ST ANDARD CONSTRUCTION S CODE A V ALVEĆACTUA T OR POSITION IS SHOWN. S ACTUA TOR IS P ARALLEL WITH PIPELINE (TOP VIEW). S AIR A T PORT A ROTA TES PINION GEAR CCW , AND SPRING C ...

  • Fisher D500243X012 - page 8

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 8 Figure 3. Mounting Style Codes and Positions (Section 3) P SERIES DOUBLE ACTING ACTUA TOR CODES CODE A ST ANDARD CONSTRUCTION S CODE A V ALVEĆACTUA T OR POSITION IS SHOWN. S ACTUA TOR IS P ARALLEL WITH PIPELINE (TOP VIEW). S AIR A T PORT A ROTA TES PINION GEAR CCW , AND AIR A T ...

  • Fisher D500243X012 - page 9

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 9 Figure 3. Mounting Style Codes and Positions (Section 4) P SERIES SPRING RETURN ACTUA TOR CODES CODE A ST ANDARD CONSTRUCTION S CODE A V ALVEĆACTUA T OR POSITION IS SHOWN. S ACTUA TOR IS P ARALLEL WITH PIPELINE (TOP VIEW). S AIR A T PORT A ROTA TES PINION GEAR CCW , AND SPRING C ...

  • Fisher D500243X012 - page 10

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 10 LOCK NUT TOP VIEW Figure 4. T ravel Stop Adjustments LIMIT STOP PLA TE DET AIL FOR P SERIES ACTUA TORS OPEN STOP 2 STOP 1 3 _ 10 _ 3 _ 15 _ CLOSED ADJUSTABLE RANGE STROKE ADJUSTMENT CAM END CAP ADJUSTMENT HOUSING ADJUSTMENT SIDE VIEW DUAL STOP DET AIL FOR EĆSERIES ACTUA TORS EL ...

  • Fisher D500243X012 - page 11

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 11 Figure 5 . Code A Assemblies AB AB DOUBLE ACTING SPRING RETURN A7047 / IL Troubleshooting If the actuator does not function, make the following checks: 1. Check for worn teeth on piston racks, if the actuator exhibits excessive amounts of backlash. If worn, replace piston/gear r ...

  • Fisher D500243X012 - page 12

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 12 any maintenance operations to avoid personal injury. D The valve packing area may contain process fluids that are pressurized, even when the valve has been removed from the pipeline . Process fluids may spray out under pressure when removing the packing hardware or packing rings ...

  • Fisher D500243X012 - page 13

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 13 Figure 6. Spring Return End Cap Assembly NOTE: THE PISTON IS SHOWN IN THE FULLY RETRACTED POSITION. SPRINGS ARE FULLY EXTENDED AND CONTAINED WITHIN THE SPRING HOLDER BY THE WASHER (KEYS 9 AND 34). THE WASHER KEEPS THE SPRING RETAINER CONNECTED TO THE END CAP. TRA VEL STOP SCREW ...

  • Fisher D500243X012 - page 14

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 14 4. Remove the adjustable travel stop/ housing adjustment (see figure 4). 5. Removing the Pistons: The two pistons (key 2) can now be removed by rotating the drive shaft, moving the piston assemblies outward until the pinion gear has released them. The gear rack in E Series actua ...

  • Fisher D500243X012 - page 15

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 15 construction does not use the adjustment screw, install the drive shaft, and go to step 6 below. 5. Note the alignment of the cam with respect to the housing adjustment screw while installing the shaft into the body. Install the drive shaft. 6. Install the washer, thrust washer, ...

  • Fisher D500243X012 - page 16

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 16 Figure 7. Installing Actuator Pistons NOTE: PISTONS ARE SHOWN IN THE CODE A POSITION ST ART PISTONS A T BODY ENDS PISTONS A T BODY CENTER 45 _ 0 _ 90 _ 75B0509-A A7042 / IL Figure 8. Spring Arrangement for E Series Actuators SPRING SET 2 MID SPRING SPRING SET 3 OUTER SPRING (OR ...

  • Fisher D500243X012 - page 17

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 17 Figure 9. Spring Arrangement for P Series Actuators ELO A 4.201 A7041-1 / IL 8 SPRINGS 14 SPRINGS 12 SPRINGS 10 SPRINGS 4. Place the end cap bolts through the retention holes of the end cap. If converting a double acting unit to a spring return unit, be sure to use new end cap s ...

  • Fisher D500243X012 - page 18

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 18 Installing the Bypass Valve The optional bypass valve should be used when pressure needs to be stabilized between port A and port B (see figure 10). The following steps provide installation of the bypass valve. Removing the bypass valve simply requires performing these steps in ...

  • Fisher D500243X012 - page 19

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 19 Parts Kits Table 5. Repair Kits Actuator Standard Construction Nitrile O-Rings High Temperature Fluorocarbon O-Rings Low Temperature EPDM O-Rings E25 75B0594X012 75B0595X012 75B0596X012 E40 75B0594X022 75B0595X022 75B0596X022 E65 75B0594X032 75B0595X032 75B0596X032 E100 75B0594X ...

  • Fisher D500243X012 - page 20

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 20 Parts Reference Table 7. E Series Parts List Key Number Description Quantity 1 Body, If you need an actuator body (key 1) as a replacement part , order by actuator size, serial number, and desired material. Contact your Emerson sales office. 1 2 Piston, Aluminum alloy 2 3 Drive ...

  • Fisher D500243X012 - page 21

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 21 Figure 1 1. T ype 1035 E Series Actuator Assembly ELO A 1.101.33 (3-96) DOUBLE ACTING SPRING RETURN END CAP NOTE: P ARTS NOT SHOWN ARE HOUSING ADJUSTMENT SCREW , HEX (LOCK) NUT AND STROKING CAM. REFER TO FIGURE 4 FOR LOCA TION OF P ARTS. OPTIONAL CENTER-PLA TE ...

  • Fisher D500243X012 - page 22

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 22 Figure 12. T ype 1035 P Series Actuator Assembly A 1.101.30 (3-96) SIDE VIEW DOUBLE ACTING SPRING RETURN TOP VIEW ...

  • Fisher D500243X012 - page 23

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 23 ...

  • Fisher D500243X012 - page 24

    1035/El-O-Matic Actuator Instruction Manual Form 5417 February 2007 24 Emerson Process Management Marshalltown, Iowa 50158 USA Cernay 68700 France Sao Paulo 05424 Brazil Singapore 128461 www.Fisher.com The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they ...

Manufacturer Fisher Category Automobile Parts

Documents that we receive from a manufacturer of a Fisher D500243X012 can be divided into several groups. They are, among others:
- Fisher technical drawings
- D500243X012 manuals
- Fisher product data sheets
- information booklets
- or energy labels Fisher D500243X012
All of them are important, but the most important information from the point of view of use of the device are in the user manual Fisher D500243X012.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Fisher D500243X012, service manual, brief instructions and user manuals Fisher D500243X012. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Fisher D500243X012.

Similar manuals

A complete manual for the device Fisher D500243X012, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Fisher D500243X012 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Fisher D500243X012.

A complete Fisher manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Fisher D500243X012 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Fisher D500243X012, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Fisher D500243X012, that we can find in the current document
3. Tips how to use the basic functions of the device Fisher D500243X012 - which should help us in our first steps of using Fisher D500243X012
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Fisher D500243X012
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Fisher D500243X012 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Fisher D500243X012?

Use the form below

If you did not solve your problem by using a manual Fisher D500243X012, ask a question using the form below. If a user had a similar problem with Fisher D500243X012 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)