English dropdown-ico

Manual Paradyne 8310 MVLt

108 pages 0.83 mb
Download

Go to site of 108

Summary
  • Paradyne 8310 MVLt - page 1

    HOTWIRE  DSLAM FOR 8310 MVL  AND 8510 RADSL CARDS USER’S GUIDE Document No. 8000-A2-GB26-10 January 1999 ...

  • Paradyne 8310 MVLt - page 2

    Printed on recycled paper A 8000-A2-GB26-10 January 1999 Copyright E 1999 Paradyne Corporation. All rights reserved. Printed in U.S.A. Notice This publication is protected by federal copyright law . No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or compu ...

  • Paradyne 8310 MVLt - page 3

    i 8000-A2-GB26-10 January 1999 Contents About This Guide H Document Purpose and Intended Audience v . . . . . . . . . . . . . . . . . . . . . . . . . H Document Summary vi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H Product-Related Documents vii . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Paradyne 8310 MVLt - page 4

    Contents ii 8000-A2-GB26-10 January 1999 H Logging In to the System 2-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reviewing the Levels of Access 2-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . User Login Screen 2-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Paradyne 8310 MVLt - page 5

    Contents iii 8000-A2-GB26-10 January 1999 5 Monitoring the Hotwir e DSLAM H Overview 5-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H DSL Monitoring Card Status Screens 5-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H DSL Monitoring Physical Layer Screens 5-4 . . . . ...

  • Paradyne 8310 MVLt - page 6

    Contents iv 8000-A2-GB26-10 January 1999 This page intentionally left blank. ...

  • Paradyne 8310 MVLt - page 7

    v 8000-A2-GB26-10 January 1999 About This Guide Document Purpose and Intended Audience This guide describes how to configure and operate the software component of the Hotwire Digital Subscriber Line Access Multiplexer (DSLAM) system. It is intended for administrators and operators who maintain the networks that support Hotwire operation. A basic un ...

  • Paradyne 8310 MVLt - page 8

    About This Guide vi 8000-A2-GB26-10 January 1999 Document Summary Section Description Chapter 1 Hotwire DSLAM System Description. Provides an overview of the Hotwire 8600 and 8800 systems. Chapter 2 Hotwire Menus and Screens. Describes the operation of Hotwire menus, screens, and commonly used navigation keys. Also provides instructions on how to l ...

  • Paradyne 8310 MVLt - page 9

    About This Guide vii 8000-A2-GB26-10 January 1999 Pr oduct-Related Documents Document Number Document Title 5020-A2-GN10 Hotwire 5020 POTS Splitter Central Office Installation Instructions 5030-A2-GN10 Hotwire 5030 POTS Splitter Customer Premises Installation Instructions 5038-A2-GN10 Hotwire 5038 Distributed POTS Splitter Customer Premises Install ...

  • Paradyne 8310 MVLt - page 10

    About This Guide viii 8000-A2-GB26-10 January 1999 ...

  • Paradyne 8310 MVLt - page 11

    1-1 8000-A2-GB26-10 January 1999 Hotwire DSLAM System Description 1 What is the Hotwir e DSLAM? The Hotwire t Digital Subscriber Line Access Multiplexer (DSLAM) is a Digital Subscriber Line (DSL) platform that houses a Management Communications Controller (MCC) card and up to 18 DSL cards. These can be 8310 Multiple Virtual Lines (MVL t ) cards, 85 ...

  • Paradyne 8310 MVLt - page 12

    Hotwire DSLAM System Description 1-2 8000-A2-GB26-10 January 1999 The following illustration shows a typical Hotwire configuration. Legend: DSL - Digital Subscriber Line SN - Ser vice Node MDF - Main Distribution F rame PO TS - Plain Old T elephone Ser vice IPC - Interworking P acket Concentrator DSL CARD DSLAM Central Office (CO) 98-15974 Customer ...

  • Paradyne 8310 MVLt - page 13

    Hotwire DSLAM System Description 1-3 8000-A2-GB26-10 January 1999 Hotwire DSLAM Chassis There are three types of chassis: H The Hotwire 8600 DSLAM chassis is an independent, standalone system. The stackable design provides for up to six chassis to share management access through a single MCC card, which in turn, allows an additional slot for a DSL ...

  • Paradyne 8310 MVLt - page 14

    Hotwire DSLAM System Description 1-4 8000-A2-GB26-10 January 1999 H The Hotwire 8800 DSLAM chassis is a 20-slot chassis designed to house up to 18 DSL cards and one MCC card. (The remaining slot is reserved for the future use of a redundant MCC card.) For more information, see the Hotwire 8800 Digital Subscriber Line Access Multiplexer (DSLAM) Inst ...

  • Paradyne 8310 MVLt - page 15

    Hotwire DSLAM System Description 1-5 8000-A2-GB26-10 January 1999 MCC Card The chassis requires one MCC card, which is a processor card that administers and provides diagnostic connectivity to the DSL cards. It acts as a mid-level manager and works in conjunction with a Simple Network Management Protocol (SNMP) system, such as Paradyne’s OpenLane ...

  • Paradyne 8310 MVLt - page 16

    Hotwire DSLAM System Description 1-6 8000-A2-GB26-10 January 1999 Levels of Access There are two levels of diagnostic/administrative access in the Hotwire DSLAM system: H Administrator The Administrator has complete read/write access to the DSLAM system. With Administrator permission, you can set specific parameters and variables to configure cards ...

  • Paradyne 8310 MVLt - page 17

    Hotwire DSLAM System Description 1-7 8000-A2-GB26-10 January 1999 Monitoring the DSL Cards The Hotwire DSLAM software provides submenu options to monitor the activity of the Hotwire DSL cards. The monitoring screens allow you to: H List the status of active ports and interfaces in a card, as well as display statistics about other physical layers an ...

  • Paradyne 8310 MVLt - page 18

    Hotwire DSLAM System Description 1-8 8000-A2-GB26-10 January 1999 T r oubleshooting and Diagnostics The Hotwire DSLAM system provides DSL diagnostic submenu options that: H Display self-test results for CPU health, memory and ports, and resets. H Show major alarms such as Selftest Failure, Processor Failure, and DSL or Ethernet port failure. H Show ...

  • Paradyne 8310 MVLt - page 19

    2-1 8000-A2-GB26-10 January 1999 Hotwire Menus and Scr eens 2 Overview The Hotwire DSLAM has a menu- and screen-driven user interface system that enables the user to configure and monitor the Hotwire cards. This chapter contains: H Menu and Screen Formats H Commonly Used Navigation Keys H Hotwire Menu Hierarchy H Logging In to the System H Exiting ...

  • Paradyne 8310 MVLt - page 20

    Hotwire Menus and Screens 2-2 8000-A2-GB26-10 January 1999 Menu and Scr een Formats The Hotwire DSLAM uses an ASCII-based text format for its menus and screens. This section describes the components of a typical Hotwire menu and screen. Components of a Hotwire Menu A typical Hotwire menu format looks like this: 1 2 3 1. Menu Title is the top line o ...

  • Paradyne 8310 MVLt - page 21

    Hotwire Menus and Screens 2-3 8000-A2-GB26-10 January 1999 Components of a Hotwire Scr een A typical Hotwire screen looks like this: 2 1 4 3 1. System Header Line is the top line of the screen. This line has two fields that provide system login information. — The first field displays the system name or the individual card name. (Access the System ...

  • Paradyne 8310 MVLt - page 22

    Hotwire Menus and Screens 2-4 8000-A2-GB26-10 January 1999 4. Status Line is the last line on the screen. This line displays status information about the selected card. For information about these fields, see Card Selection Screen on page 2-10. Commonly Used Navigation Keys The following table lists navigation keys and their definitions. These comm ...

  • Paradyne 8310 MVLt - page 23

    Hotwire Menus and Screens 2-5 8000-A2-GB26-10 January 1999 Hotwir e Menu Hierarchy This section describes the menu structure of the Hotwire user interface. Hotwire Chassis Main Menu The following illustration shows the Hotwire Chassis Main Menu. Hotwire Chassis A. Chassis Inf o B. Card Selection C . Logout 97-15566-01 From the Hotwire Chassis Main ...

  • Paradyne 8310 MVLt - page 24

    Hotwire Menus and Screens 2-6 8000-A2-GB26-10 January 1999 Hotwire – DSL Menu After selecting a specific DSL card from the Card Selection screen, the DSLAM system displays the Hotwire – DSL Menu. See Monitoring Menu See Configuration Menu* Hotwire – DSL A. Configuration* B. Monitor ing C. Applications D . Diagnostics E. Exit 98-15975 Applicat ...

  • Paradyne 8310 MVLt - page 25

    Hotwire Menus and Screens 2-7 8000-A2-GB26-10 January 1999 DSL Card Configuration Menu The following figure illustrates the complete Configuration menu hierarchy from the Hotwire – DSL menu. 98-15899-01 (A) Configuration A. Card Status B. Por ts C. Interf aces D . Users E. Bridge F . SN Configuration G. Filters (F) Download Code A. Download Code ...

  • Paradyne 8310 MVLt - page 26

    Hotwire Menus and Screens 2-8 8000-A2-GB26-10 January 1999 DSL Card Monitoring Menu The following figure illustrates the complete Monitoring menu hierarchy from the Hotwire – DSL menu. (A) Card Status A. Card Inf o B. Login Histor y C . Syslog (B) Physical La yer A. Activ e List B. Ether net Stats C. EtherHDLC Stats D . DSL Link P erf E. DSL P er ...

  • Paradyne 8310 MVLt - page 27

    Hotwire Menus and Screens 2-9 8000-A2-GB26-10 January 1999 Reviewing the Levels of Access There are two levels of privileges on the Hotwire DSLAM system. Y our user accounts can be configured with a user name, password, and privilege of: H Administrator , giving you access to all of the features of the system including configuration options, or H O ...

  • Paradyne 8310 MVLt - page 28

    Hotwire Menus and Screens 2-10 8000-A2-GB26-10 January 1999 NOTE: The login ID and password are case-sensitive; that is, the system recognizes both upper- and lowercase letters. For example, if you enter your user name and password information in uppercase letters and your assigned user name and password are in upper- and lowercase letters, the sys ...

  • Paradyne 8310 MVLt - page 29

    Hotwire Menus and Screens 2-1 1 8000-A2-GB26-10 January 1999 The status of each DSL card is indicated by codes displayed in any of eight positions to the right of the card selected. The following table explains the valid codes by position. Column Heading Position Display Description Slt <slot number> M = MCC card 1–18 = slot number for DSL ...

  • Paradyne 8310 MVLt - page 30

    Hotwire Menus and Screens 2-12 8000-A2-GB26-10 January 1999 For more information about the status displayed on this screen, such as major and minor alarms, see T roubleshooting in Chapter 6, Diagnostics and T roubleshooting. Accessing the Hotwire – DSL Menu " Procedur e T o access the Hotwire – DSL menu: 1. From the Hotwire Chassis Main Me ...

  • Paradyne 8310 MVLt - page 31

    3-1 8000-A2-GB26-10 January 1999 Configuring the Hotwire DSLAM 3 Overview The Hotwire DSLAM enables you to configure and manage the Hotwire MCC and DSL cards. This chapter describes the basic card configuration instructions. Domain T ypes T o monitor and control the overall system, the Hotwire Access Network should be partitioned into two distinct ...

  • Paradyne 8310 MVLt - page 32

    Configuring the Hotwire DSLAM 3-2 8000-A2-GB26-10 January 1999 Configuring the DSL Cards Use the procedures in the following order to minimally configure DSL cards for user data connectivity . For detailed information on these instructions, see Chapter 4, 8310 MVL and 8510 RADSL Card Configuration . For information about MCC and DSL card network to ...

  • Paradyne 8310 MVLt - page 33

    Configuring the Hotwire DSLAM 3-3 8000-A2-GB26-10 January 1999 Configuring VNID(s) on a DSL Card " Procedur e T o configure at least one VNID for this RADSL or MVL card from the Hotwire – DSL Card menu: 1. Follow this menu selection sequence : Configuration → Bridge → Card VNID ( A-E-B ) 2. T ype 0 or press Enter at the Item Number (0 to ...

  • Paradyne 8310 MVLt - page 34

    Configuring the Hotwire DSLAM 3-4 8000-A2-GB26-10 January 1999 Configuring the Active VNID on each DSL Port Y ou can configure multiple VNIDs with dif ferent next hop routers with one active VNID configured per port. " Procedur e T o configure the active VNID on each RADSL or MVL port from the Hotwire – DSL menu: 1. Follow this menu selectio ...

  • Paradyne 8310 MVLt - page 35

    Configuring the Hotwire DSLAM 3-5 8000-A2-GB26-10 January 1999 Configuring Static Users " Procedur e From the Hotwire – DSL menu: 1. Follow this menu selection sequence: Configuration → Bridge → Client VNID ( A-E-D ) 2. Enter the port number at the DSL Port #: prompt. 3. T ype 0 or press Enter at the Input Number: prompt. 4. Enter the IP ...

  • Paradyne 8310 MVLt - page 36

    Configuring the Hotwire DSLAM 3-6 8000-A2-GB26-10 January 1999 Configuring Subnet Addressing T o define a subnet entry , the IP address has to be entered as the lower boundary address of the subnet. Otherwise, only a host entry can be configured. For example, a subnet with a mask of 255.255.255.192 requires one of the following IP addresses: H 255. ...

  • Paradyne 8310 MVLt - page 37

    Configuring the Hotwire DSLAM 3-7 8000-A2-GB26-10 January 1999 Configuring IP Filter Rules " Procedur e Configure IP Filters and associated rules in the following sequence: 1. Define each filter . An IP filter consists of a set of rules. 2. Configure rules for each filter . TCP/UDP/ICMP traf fic types can be selectively forwarded or discarded ...

  • Paradyne 8310 MVLt - page 38

    Configuring the Hotwire DSLAM 3-8 8000-A2-GB26-10 January 1999 This page intentionally left blank. ...

  • Paradyne 8310 MVLt - page 39

    4-1 8000-A2-GB26-10 January 1999 8310 MVL and 8510 RADSL Card Configuration 4 Overview This chapter describes configuration options on the DSL card. Use these options to customize your applications. For information on customizing the MCC card, see the Hotwire Management Communications Controller (MCC) Card, IP Conservative, User ’s Guide. DSL Con ...

  • Paradyne 8310 MVLt - page 40

    8310 MVL and 8510 RADSL Card Configuration 4-2 8000-A2-GB26-10 January 1999 NOTE: Only a user who logs in to the Hotwire DSLAM with Administrative permission can configure the DSL card. " Procedur e T o configure card information, time/date, clear NVRAM, upload or download configuration sets, download new firmware, or reset card: 1. Follow thi ...

  • Paradyne 8310 MVLt - page 41

    8310 MVL and 8510 RADSL Card Configuration 4-3 8000-A2-GB26-10 January 1999 T able 4-1. Card Status Options (2 of 3) NVRAM Cfg Loader (NVRAM Configuration Loader) A-A-D Gives the user the ability to upload or download a copy of the card’s binary configuration data to or from a T rivial File Transfer Protocol (TFTP) server . Configuration File Nam ...

  • Paradyne 8310 MVLt - page 42

    8310 MVL and 8510 RADSL Card Configuration 4-4 8000-A2-GB26-10 January 1999 T able 4-1. Card Status Options (3 of 3) Download Code (Download Code and Apply Download) A-A-F (A and B) Gives the user the ability to download a new version of code and apply the downloaded code. For further information on this feature, see Appendix A, Download Code . Dow ...

  • Paradyne 8310 MVLt - page 43

    8310 MVL and 8510 RADSL Card Configuration 4-5 8000-A2-GB26-10 January 1999 DSL Configuration Ports Scr eens Use the system information submenu of the Ports screens to display the DSL Ports screen. " Procedur e T o configure ports: 1. Follow this menu selection sequence: Configuration → Ports ( A-B ) 2. The Ports menu appears. Enter the desi ...

  • Paradyne 8310 MVLt - page 44

    8310 MVL and 8510 RADSL Card Configuration 4-6 8000-A2-GB26-10 January 1999 T able 4-2. Ports Options (2 of 3) DSL Ports (RADSL Parameters) 8510 RADSL Card A-B-B Gives the user the ability to configure the operational and alarm parameters of the RADSL ports on the RADSL 8510 card. Each RADSL port is configured separately . NOTE: For the 8310 MVL ca ...

  • Paradyne 8310 MVLt - page 45

    8310 MVL and 8510 RADSL Card Configuration 4-7 8000-A2-GB26-10 January 1999 T able 4-2. Ports Options (3 of 3) DSL Ports (MVL Parameters) 8310 MVL Card A-B-B Gives the user the ability to configure the operational and alarm parameters of the MVL ports on the 8310 card. Each MVL port is configured separately . NOTE: For the 8510 RADSL card, refer to ...

  • Paradyne 8310 MVLt - page 46

    8310 MVL and 8510 RADSL Card Configuration 4-8 8000-A2-GB26-10 January 1999 DSL Configuration Interfaces Scr eens Use the system information submenu of the Interfaces screens to configure basic interface information. " Procedur e T o view DSL card information, configure Maximum T ransmission Unit (MTU) settings, bind filters to DSL interfaces, ...

  • Paradyne 8310 MVLt - page 47

    8310 MVL and 8510 RADSL Card Configuration 4-9 8000-A2-GB26-10 January 1999 T able 4-3. Interfaces Options General (General Interfaces) A-C-A Gives the user the ability to configure and view basic card interface information about a given interface, including binding filters. Interface Name – 3 characters. e1a = Ethernet port; s1c, s1d, s1e and s1 ...

  • Paradyne 8310 MVLt - page 48

    8310 MVL and 8510 RADSL Card Configuration 4-10 8000-A2-GB26-10 January 1999 DSL Configuration Users Scr eens Use the system information submenu of the Users screens to configure login accounts for T elnet sessions directly to the DSL cards. This menu item is not currently supported on this card. DSL Configuration Bridge Scr eens Use the system inf ...

  • Paradyne 8310 MVLt - page 49

    8310 MVL and 8510 RADSL Card Configuration 4-1 1 8000-A2-GB26-10 January 1999 T able 4-4. Bridge Options (1 of 3) General (General Bridge Parameters) A-E-A Gives the user the ability to configure general bridge parameters. Complete Entry Timeout – Enter the bridge aging timeout (10–1,000,000 seconds) (Default = 300). VNID T agging – Enable/Di ...

  • Paradyne 8310 MVLt - page 50

    8310 MVL and 8510 RADSL Card Configuration 4-12 8000-A2-GB26-10 January 1999 T able 4-4. Bridge Options (2 of 3) Client VNID A-E-D Gives the user the ability to configure static clients on VNIDs. Up to 32 entries per port (static users, DHCP users, or subnets) are allowed. Multiple screens are required to completely configure the port. For a list o ...

  • Paradyne 8310 MVLt - page 51

    8310 MVL and 8510 RADSL Card Configuration 4-13 8000-A2-GB26-10 January 1999 T able 4-4. Bridge Options (3 of 3) ARP (Parameters and Add ARP Entry) A-E-E (A and B) Select Parameters (A) or ARP Entry (B) Parameters (A) Gives the user the ability to configure general Address Resolution Protocol (ARP) cache parameters. Complete Entry Timeout (minutes) ...

  • Paradyne 8310 MVLt - page 52

    8310 MVL and 8510 RADSL Card Configuration 4-14 8000-A2-GB26-10 January 1999 DSL Configuration Service Node Scr eens Use the SN Configuration screen to configure endpoint Service Node information. " Procedur e 1. Follow this menu selection sequence: Configuration → SN Configuration ( A-F ). 2. The SN Configuration menu appears. Enter the des ...

  • Paradyne 8310 MVLt - page 53

    8310 MVL and 8510 RADSL Card Configuration 4-15 8000-A2-GB26-10 January 1999 T able 4-5. Service Node Options SN Configuration A-F Displays endpoint information for the 5620 RTU or 6310 MVL modem. Port # – Enter the RADSL or MVL port number (1–4). SN T ype – Model number of SN connected to the DSL port. For Model 8510 RADSL, the SN is 5620. F ...

  • Paradyne 8310 MVLt - page 54

    8310 MVL and 8510 RADSL Card Configuration 4-16 8000-A2-GB26-10 January 1999 DSL Configuration Filters Scr een Use the IP Router Filters to add, delete, or edit a filter . " Procedur e 1. Follow this menu selection sequence: Configuration → Filters → IP Filters ( A-G-A ). 2. The IP Filters screen appears. Enter the desired value on the sel ...

  • Paradyne 8310 MVLt - page 55

    8310 MVL and 8510 RADSL Card Configuration 4-17 8000-A2-GB26-10 January 1999 T able 4-6. Filters Options (1 of 2) IP Filters (IP Filter T able) A-G-A The IP Filter T able screen displays the following information: Item # – Enter a value from 1–8 to add, delete, or modify individual filter entries. Filter Name – Name of the IP filter . (This f ...

  • Paradyne 8310 MVLt - page 56

    8310 MVL and 8510 RADSL Card Configuration 4-18 8000-A2-GB26-10 January 1999 T able 4-6. Filters Options (2 of 2) IP Filters (IP Filter Configuration) ( continued) A-G-A Filter Name – Up to 12 characters. Default Filter Action – Forward (Packet)/Discard (Packet) (Default = Forward). The Default Filter Action applies when there is no match or th ...

  • Paradyne 8310 MVLt - page 57

    5-1 8000-A2-GB26-10 January 1999 Monitoring the Hotwire DSLAM 5 Overview The Hotwire DSLAM lets you monitor the activity of the Hotwire DSL cards. When you select Monitoring from the Hotwire DSL Main Menu, a menu tree of selections on history and error logs, performance statistics, card status, and physical and logical interface status information ...

  • Paradyne 8310 MVLt - page 58

    Monitoring the Hotwire DSLAM 5-2 8000-A2-GB26-10 January 1999 " Procedur e T o view general card information, login history , and the system log: 1. Follow this menu selection sequence: Monitoring → Card Status ( B-A ) 2. The Card Status menu appears. Select the submenu option as shown in T able 5-1 and press Enter . T able 5-1. Card Status ...

  • Paradyne 8310 MVLt - page 59

    Monitoring the Hotwire DSLAM 5-3 8000-A2-GB26-10 January 1999 Syslog Screen Example ...

  • Paradyne 8310 MVLt - page 60

    Monitoring the Hotwire DSLAM 5-4 8000-A2-GB26-10 January 1999 DSL Monitoring Physical Layer Scr eens Use the Physical Layer screens to display read-only system information about physical ports. " Procedur e T o view the active ports list, Ethernet statistics, and HDLC bus statistics: 1. Follow this menu selection sequence: Monitoring → Physi ...

  • Paradyne 8310 MVLt - page 61

    Monitoring the Hotwire DSLAM 5-5 8000-A2-GB26-10 January 1999 T able 5-2. Physical Layer Options (2 of 6) Ethernet Stats (Ethernet Statistics) B-B-B Displays a list of the Ethernet statistics of the LAN port (e1a). The counters increment in real time and you may press Ctrl-r at any time to reset the counters. Port – T ype of port (e1a). Initializ ...

  • Paradyne 8310 MVLt - page 62

    Monitoring the Hotwire DSLAM 5-6 8000-A2-GB26-10 January 1999 T able 5-2. Physical Layer Options (3 of 6) Ethernet Stats (Ethernet Statistics) (continued) B-B-B Packets transmitted – Number of packets transmitted by the Ethernet port and what type. H Multicast – Single packets copied to a specific subset of network addresses. H Broadcast – Me ...

  • Paradyne 8310 MVLt - page 63

    Monitoring the Hotwire DSLAM 5-7 8000-A2-GB26-10 January 1999 T able 5-2. Physical Layer Options (4 of 6) DSL Link Perf (DSL Link Performance Summary) B-B-D Displays a summary of the link performance for each of the DSL ports. Enter port number 1–4 to see the fields for current 15-minute period (real time count of events during the past 0 to 15 m ...

  • Paradyne 8310 MVLt - page 64

    Monitoring the Hotwire DSLAM 5-8 8000-A2-GB26-10 January 1999 T able 5-2. Physical Layer Options (5 of 6) DSL Perf Stats (DSL Performance Stats) B-B-E Displays the link performance for each of the DSL ports. T ells you the number of times the link has been down and the elapsed time the link has been up. Enter port number 1–4 to see the fields for ...

  • Paradyne 8310 MVLt - page 65

    Monitoring the Hotwire DSLAM 5-9 8000-A2-GB26-10 January 1999 T able 5-2. Physical Layer Options (6 of 6) DSL Error Stats B-B-F Displays the error performance (margin) rates for each of the DSL ports after selecting a specific DSL port number . Margin is a measure of performance. Enter port number 1–4 to see the fields for current 15-minute perio ...

  • Paradyne 8310 MVLt - page 66

    Monitoring the Hotwire DSLAM 5-10 8000-A2-GB26-10 January 1999 DSL Monitoring Interfaces Scr eens Use the Interfaces screens to display read-only system information about interfaces. " Procedur e T o view the active interfaces list and interface status list: 1. Follow this menu selection sequence: Monitoring → Interfaces ( B-C ) 2. The Monit ...

  • Paradyne 8310 MVLt - page 67

    Monitoring the Hotwire DSLAM 5-1 1 8000-A2-GB26-10 January 1999 T able 5-3. Monitor Interfaces Options Active List (Active Interfaces List) B-C-A Displays a list of the current status of all of the active interfaces in the card. if – Number of the interface. name – Name of the interface. type – Interface type (static). link – Name of the pr ...

  • Paradyne 8310 MVLt - page 68

    Monitoring the Hotwire DSLAM 5-12 8000-A2-GB26-10 January 1999 DSL Network Pr otocol Screens Use the Network Protocol screens to display read-only system information for the management domain. " Procedur e T o view various management traffic statistics between the access node and the MCC card, including socket statistics, UDP statistics, TCP d ...

  • Paradyne 8310 MVLt - page 69

    Monitoring the Hotwire DSLAM 5-13 8000-A2-GB26-10 January 1999 T able 5-4. Network Protocol Options (1 of 5) Socket Statistics B-D-A Displays management domain information for the interface. Enter the socket name from the active socket list to view information on the application assigned to the specified socket number . Start Socket – Enter the s ...

  • Paradyne 8310 MVLt - page 70

    Monitoring the Hotwire DSLAM 5-14 8000-A2-GB26-10 January 1999 T able 5-4. Network Protocol Options (2 of 5) TCP Statistics (TCP Data Statistics) B-D-C Displays a summary of the T ransmission Control Protocol (TCP) data activity (packets and bytes transmitted and received) over the backplane of the MCC card. The TCP statistics is measuring packets ...

  • Paradyne 8310 MVLt - page 71

    Monitoring the Hotwire DSLAM 5-15 8000-A2-GB26-10 January 1999 T able 5-4. Network Protocol Options (3 of 5) TCP Connection Statistics B-D-C When you press Return on the TCP Data Statistics screen, the TCP Connection Statistics screen is displayed, showing a summary of the TCP connection activity on all interfaces that terminate on the DSL card. co ...

  • Paradyne 8310 MVLt - page 72

    Monitoring the Hotwire DSLAM 5-16 8000-A2-GB26-10 January 1999 T able 5-4. Network Protocol Options (4 of 5) ICMP Statistics (ICMP Packet Statistics) B-D-E Displays a summary of the Internet Control Message Protocol (ICMP) activity on the backplane that terminates on the DSL card, such as echo replies. The columns show output and input packet count ...

  • Paradyne 8310 MVLt - page 73

    Monitoring the Hotwire DSLAM 5-17 8000-A2-GB26-10 January 1999 T able 5-4. Network Protocol Options (5 of 5) SNMP Authentication Statistics B-D-F When you press Return on the SNMP Statistics screen, the SNMP Authentication Statistics screen is displayed, giving you additional Community Administration information. Community Administration – Number ...

  • Paradyne 8310 MVLt - page 74

    Monitoring the Hotwire DSLAM 5-18 8000-A2-GB26-10 January 1999 DSL Bridge Scr eens Use the Bridge screens to display read-only system information. " Procedur e T o view bridge information: 1. Follow this menu selection sequence: Monitoring → Bridge ( B-E ) 2. The Bridge menu appears. Select the submenu option as shown in T able 5-5 and press ...

  • Paradyne 8310 MVLt - page 75

    Monitoring the Hotwire DSLAM 5-19 8000-A2-GB26-10 January 1999 T able 5-5. Bridge Options (2 of 3) MAC T able B-E-B Displays the MAC table. Bridge – lb0 – Name of the Logical Bridge (Equivalent to e1a Ethernet). Entry # – Enter the MAC table entry number you wish to view . Entries – Number of entries in the MAC table. Bridge Timer – T ime ...

  • Paradyne 8310 MVLt - page 76

    Monitoring the Hotwire DSLAM 5-20 8000-A2-GB26-10 January 1999 T able 5-5. Bridge Options (3 of 3) VNID B-E-D Displays VNID information. Item Number – Enter the item to display . VNID – VNID between 2–4094 (Default = none). Ports – DSL ports that are members of the VNID. NOTE: The Ethernet interface is a member of all VNIDs. ARP T able B-E- ...

  • Paradyne 8310 MVLt - page 77

    Monitoring the Hotwire DSLAM 5-21 8000-A2-GB26-10 January 1999 DSL SN Information Scr een Use the SN Information screen to display read-only Service Node information. " Procedur e 1. Follow this menu selection sequence: Monitoring → SN Information ( B-F ) 2. The SN menu appears. The information displayed on this screen is shown in T able 5-6 ...

  • Paradyne 8310 MVLt - page 78

    Monitoring the Hotwire DSLAM 5-22 8000-A2-GB26-10 January 1999 DSL Monitoring IP Filters Scr een Use the IP Filters screen to display configured filters. " Procedur e 1. Follow this menu selection sequence: Monitoring → Filters → IP Filters ( B-G-A ) 2. The IP Filters screen appears. The information displayed on this screen is shown in T a ...

  • Paradyne 8310 MVLt - page 79

    6-1 8000-A2-GB26-10 January 1999 Diagnostics and T r oubleshooting 6 Diagnostic Scr eens Use the Diagnostics submenu to perform self-tests or view alarm status. ...

  • Paradyne 8310 MVLt - page 80

    Diagnostics and T roubleshooting 6-2 8000-A2-GB26-10 January 1999 " Procedur e T o view self-test, card alarm, packet test, and Service Node self-test information: 1. From the Hotwire – DSL Menu, select: Diagnostics ( D ) 2. The Diagnostics menu appears. Select the submenu option as shown in T able 6-1 and press Enter . T able 6-1. Diagnosti ...

  • Paradyne 8310 MVLt - page 81

    Diagnostics and T roubleshooting 6-3 8000-A2-GB26-10 January 1999 T r oubleshooting The status of each card in the Hotwire DSLAM is indicated on the Card Selection screen (see Components of a Hotwire Screen in Chapter 2, Hotwire Menus and Screens). Checking Alarms If the Card Selection screen indicates that a Major or Minor Alarm is on a card, foll ...

  • Paradyne 8310 MVLt - page 82

    Diagnostics and T roubleshooting 6-4 8000-A2-GB26-10 January 1999 T able 6-2. Major Alarms (2 of 2) Alarm Action Ethernet Port Failure 1. Check cable connections to the DSLAM. – If cables are terminated properly , go to Step 2. – If cables are not terminated properly , terminate them correctly . 2. Check cable connections to the hub or Ethernet ...

  • Paradyne 8310 MVLt - page 83

    Diagnostics and T roubleshooting 6-5 8000-A2-GB26-10 January 1999 Minor Alarms Use T able 6-3 to determine the appropriate action to take for each Minor Alarm. T able 6-3. Minor Alarms (1 of 2) Alarm Action Config Error 1. Check the Selftest Results display by following the menu selection sequence: Diagnostics → Selftest ( D - A ) 2. Do another S ...

  • Paradyne 8310 MVLt - page 84

    Diagnostics and T roubleshooting 6-6 8000-A2-GB26-10 January 1999 T able 6-3. Minor Alarms (2 of 2) Alarm Action Link Down Threshold (A trap message is sent if the number of DSL link down events in 15 minutes exceeds the selected value.) H If the threshold is set low (1–4) and the link is currently down, then there may be a local loop or Service ...

  • Paradyne 8310 MVLt - page 85

    Diagnostics and T roubleshooting 6-7 8000-A2-GB26-10 January 1999 Network Pr oblems T o provide a practical aid in the isolation and resolution of Layer 2 network difficulties, the guidelines in this section provide information on troubleshooting a generic network containing the devices found in most networks. The illustration below shows the gener ...

  • Paradyne 8310 MVLt - page 86

    Diagnostics and T roubleshooting 6-8 8000-A2-GB26-10 January 1999 The following table provides an overview of the sequence of troubleshooting procedures for the DSL card. The following sections address potential problems that may occur in each network segment: I f the Client cannot Ping the Gateway Router and . . . Then . . . The Client cannot reac ...

  • Paradyne 8310 MVLt - page 87

    Diagnostics and T roubleshooting 6-9 8000-A2-GB26-10 January 1999 Client Cannot Reach Service Node T able 6-4. Client-to-Service Node Segment Layer Solution Layer 1 – Physical 1. Make sure the PWR LED on the front of the Service Node is lit. Use only the power adapter shipped with the unit. 2. T o verify connection to the client, make sure the ET ...

  • Paradyne 8310 MVLt - page 88

    Diagnostics and T roubleshooting 6-10 8000-A2-GB26-10 January 1999 Client Cannot Reach DSLAM This section examines the Service Node-to-DSLAM segment of the network. NOTE: On the DSLAM, verify that the DSL link is up and that there is a MAC address for the client (screen B-E-B ). — If the MAC address appears, and all items in the previous section ...

  • Paradyne 8310 MVLt - page 89

    Diagnostics and T roubleshooting 6-1 1 8000-A2-GB26-10 January 1999 T able 6-5. Service Node-to-DSLAM Segment (2 of 2) Layer Solution Layer 1 – Physical (continued) 5. Make sure the LINE LED on the Service Node is lit. This verifies a DSL connection to the DSLAM. 6. On the Access Node, make sure the LINE ST A TUS is up. 7. Make sure the CO splitt ...

  • Paradyne 8310 MVLt - page 90

    Diagnostics and T roubleshooting 6-12 8000-A2-GB26-10 January 1999 Client Cannot Reach IPC This section examines the DSLAM-to-IPC segment of the network. NOTE: On the IPC, verify that there is a MAC address for the client (enter the macinfo command). If the correct MAC address appears on the IPC, and all the items in the previous sections have been ...

  • Paradyne 8310 MVLt - page 91

    Diagnostics and T roubleshooting 6-13 8000-A2-GB26-10 January 1999 T able 6-6. DSLAM-to-IPC Segment Layer Solution Layer 1 – Physical If the DSL card shows an alarm, go to screen D-B to determine the cause. An Ethernet alarm usually means no connection to the IPC. Check the cable and make sure the correct type is being used. On DSLAM, make sure t ...

  • Paradyne 8310 MVLt - page 92

    Diagnostics and T roubleshooting 6-14 8000-A2-GB26-10 January 1999 Client Cannot Reach Router T able 6-7 examines the IPC-to-Router segment of the network on the IPC end of the segment. 99-16175-01 O O I I Ne xt Hop Router (NHR) DSLAM Clients NMS WA N Hub SN SN ISP IPC WA N IPC-to-Router Segment NMS ISP Gatew ay Router T able 6-7. IPC-to-Router Seg ...

  • Paradyne 8310 MVLt - page 93

    Diagnostics and T roubleshooting 6-15 8000-A2-GB26-10 January 1999 T able 6-8 examines the Router-to-IPC segment of the network from the router end of the segment. T able 6-8. Router -to-IPC Segment Layer Solution Layer 2 – Network 1. On the router , make sure that the defined line characteristics agree with the characteristics defined on the IPC ...

  • Paradyne 8310 MVLt - page 94

    Diagnostics and T roubleshooting 6-16 8000-A2-GB26-10 January 1999 Performance Issues – V iewing Network Statistics The previous sections of this document examined connectivity issues, i.e., the inability to Ping the router . T able 6-9 presents information on viewing DSLAM statistics screens to examine performance issues. These statistic screens ...

  • Paradyne 8310 MVLt - page 95

    A-1 8000-A2-GB26-10 January 1999 Download Code A The Download Code menu option on the Hotwire DSLAM gives you the ability to upgrade your software with a new version of code and then apply this code to your system. New firmware releases are typically applied to the MCC card, DSL cards, and/or endpoints in your system. When a software upgrade affect ...

  • Paradyne 8310 MVLt - page 96

    Download Code A-2 8000-A2-GB26-10 January 1999 Download Code When you are attempting to download to the DSL cards, refer to T able 5-1 , Card Status Options, in Chapter 5, 8310 MVL and 8510 RADSL Card Configuration . In general, the following describes what to expect when you have initiated a download from the configuration menu. From the DSL Confi ...

  • Paradyne 8310 MVLt - page 97

    B-1 8000-A2-GB26-10 January 1999 T raps B DSL Card T raps T raps are configured via a T elnet or terminal session. The addition or removal of a card or another hardware component within the Hotwire DSLAM system causes a trap to be generated. These traps indicate a configuration change notification (CCN) of a card (a hardware replacement or a softwa ...

  • Paradyne 8310 MVLt - page 98

    T raps B-2 8000-A2-GB26-10 January 1999 Event MIB T rap # Comment Severity xDSL margin normal normal Margin estimate now above customer set threshold. 103 hot_xdsl.mib (Enterprise MIB) xDSL port failure major Processor detected bad DSL modem chip set. 5 hot_xdsl.mib (Enterprise MIB) xDSL port operational normal Processor now communicating with DSL ...

  • Paradyne 8310 MVLt - page 99

    T raps B-3 8000-A2-GB26-10 January 1999 Event MIB T rap # Comment Severity SN loss of power minor Card received “last gasp” message from Service Node, followed by a link down condition one minute later . 17 hot_xdsl.mib (Enterprise MIB) SN self-test failure minor Failure of the Service Node’s hardware components. This trap is only sent if the ...

  • Paradyne 8310 MVLt - page 100

    T raps B-4 8000-A2-GB26-10 January 1999 This page intentionally left blank. ...

  • Paradyne 8310 MVLt - page 101

    GL-1 8000-A2-GB26-10 January 1999 Glossary A 10-Mbps Ethernet LAN that works on twisted-pair wiring. A symbol (usually numeric) that identifies the interface attached to a network. A software program housed within a device to provide SNMP functionality . Each agent stores management information and responds to the manager ’s request for this info ...

  • Paradyne 8310 MVLt - page 102

    Glossary GL-2 8000-A2-GB26-10 January 1999 Central Processing Unit. The main or only computing device in a data processing system. Cyclic Redundancy Check. A mathematical method of confirming the integrity of received digital data. The address used for routing packets whose destination is not in the routing table. In Routing Information Protocol (R ...

  • Paradyne 8310 MVLt - page 103

    Glossary GL-3 8000-A2-GB26-10 January 1999 A computer attached to a network that shares its information and devices with the rest of the network. An IP address having a subnet mask of 255.255.255.255. A device connecting several computers to a LAN. Internet Control Message Protocol. An Internet protocol that allows for the generation of error messa ...

  • Paradyne 8310 MVLt - page 104

    Glossary GL-4 8000-A2-GB26-10 January 1999 Network T ime Protocol. Non-V olatile RAM. A proprietary network management program used with HP OpenView that helps a network administrator manage SNMP devices. A group of control and data characters that are switched as a unit within a communications network. Protocol Data Unit. A message containing prot ...

  • Paradyne 8310 MVLt - page 105

    Glossary GL-5 8000-A2-GB26-10 January 1999 A user-specified permanent entry into the routing table that takes precedence over routes chosen by dynamic routing protocols. The subnet portion of an IP address. In a subnetted network, the host portion of an IP address is split into a subnet portion and a host portion using an address (subnet) mask. Thi ...

  • Paradyne 8310 MVLt - page 106

    Glossary GL-6 8000-A2-GB26-10 January 1999 This page intentionally left blank. ...

  • Paradyne 8310 MVLt - page 107

    IN-1 8000-A2-GB26-10 January 1999 Index A Active Interfaces List screen, 5-1 1 Active List screen, 5-4 Active Ports List screen, 5-4 Add ARP Entry screen, 4-13 Administrator access, 1-6 Administrators Overview , 3-1 Alarms screen, 6-2 Alarms, Major , 6-3 Alarms, Minor , 6-5 Apply Download screen, 4-4 ARP Parameters screen, 4-13 ARP T able screen, 5 ...

  • Paradyne 8310 MVLt - page 108

    Index IN-2 8000-A2-GB26-10 January 1999 N navigation keys, 2-4 network interface options, 4-2, 4-9, 4-15, 4-17, 5-2, 5-4, 5-1 1, 5-13, 5-18, 5-21, 5-22, 6-2 network problems, intranetworking communication problems, 6-7 NVRAM Clear screen, 4-2 NVRAM Config Loader screen, 4-3 O Operator access, 1-6 P POTS, 1-1 POTS splitter , 1-1 R Rate Adaptive Digi ...

Manufacturer Paradyne Category Network Card

Documents that we receive from a manufacturer of a Paradyne 8310 MVLt can be divided into several groups. They are, among others:
- Paradyne technical drawings
- 8310 MVLt manuals
- Paradyne product data sheets
- information booklets
- or energy labels Paradyne 8310 MVLt
All of them are important, but the most important information from the point of view of use of the device are in the user manual Paradyne 8310 MVLt.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Paradyne 8310 MVLt, service manual, brief instructions and user manuals Paradyne 8310 MVLt. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Paradyne 8310 MVLt.

Similar manuals

A complete manual for the device Paradyne 8310 MVLt, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Paradyne 8310 MVLt by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Paradyne 8310 MVLt.

A complete Paradyne manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Paradyne 8310 MVLt - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Paradyne 8310 MVLt, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Paradyne 8310 MVLt, that we can find in the current document
3. Tips how to use the basic functions of the device Paradyne 8310 MVLt - which should help us in our first steps of using Paradyne 8310 MVLt
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Paradyne 8310 MVLt
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Paradyne 8310 MVLt in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Paradyne 8310 MVLt?

Use the form below

If you did not solve your problem by using a manual Paradyne 8310 MVLt, ask a question using the form below. If a user had a similar problem with Paradyne 8310 MVLt it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)