English dropdown-ico

Manual Edimax Technology BR-6228NC V2

139 pages 4.7 mb
Download

Go to site of 139

Summary
  • Edimax Technology BR-6228NC V2 - page 1

                   BR-6228nS V2 BR-6228nC V2    User  Manual   09 ‐ 2013  /  v1.1               ...

  • Edimax Technology BR-6228NC V2 - page 2

     CONTENTS  I.  Product  Information  ...............................................................................  1  I ‐ 1.  Package  Contents  ..........................................................................................................  1  I ‐ 2.  LED  Status  ..................... ...

  • Edimax Technology BR-6228NC V2 - page 3

     III ‐ 3 ‐ 6.  Firewall  .........................................................................................................................  57  III ‐ 3 ‐ 6 ‐ 1.  URL  Blocking  ................................................................................................................  57  III ‐ ...

  • Edimax Technology BR-6228NC V2 - page 4

     IV ‐ 1 ‐ 3 ‐ 2.  Mac  ............................................................................................................................112  IV ‐ 1 ‐ 4.  How  to  Find  Your  Router’s  IP  Address  .......................................................................115  IV ‐ 1 ‐ 4 ...

  • Edimax Technology BR-6228NC V2 - page 5

    1  I. Product  Information  I ‐ 1.  Package  Contents   Before  you  start  using  this  product,  please  check  if  there  is  anything  missing  in  the  package,  and  contact  your  dealer  to  claim  the  missing  item(s):       ? ...

  • Edimax Technology BR-6228NC V2 - page 6

    2  I ‐ 2.  LED  Status    LED  LED  Status Description  PWR   On  Device  is  on.  Off  Device  is  off.  WLAN  On  Wi ‐ Fi  is  active  (or  WPS  is  active).  Flashing  Wi ‐ Fi  activity  (transferring  data).  Off  Wi ‐ Fi  is  not ...

  • Edimax Technology BR-6228NC V2 - page 7

    3  I ‐ 3.  Back  Panel         WAN  Port  LAN  Ports  1–4  WPS/Reset  Button  Power  Port  BR  6228nS  V2:  Fixed  5dBi  Antenna  BR  6228nC  V2:   Detachable  9dBi  Antenna  ...

  • Edimax Technology BR-6228NC V2 - page 8

    4  I ‐ 4.  Safety  Information   In  order  to  ensure  the  safe  operation  of  the  device  and  its  users,  please  read  and  act  in  accordance  with  the  following  safety  instructions.   1.  The  device  is  designed  for  indoo ...

  • Edimax Technology BR-6228NC V2 - page 9

    5  II. Installation   1. Plug  the  included  power  adapter  into  the  device’s  5V  DC  power  port  and  the  other  end  into  an  electrical  socket.     2. Ensure  that  the  power  LED  is  lit.  If  not,  the  device  is  not ...

  • Edimax Technology BR-6228NC V2 - page 10

    6    If  you  cannot  access  http://edimax.setup ,  please  make  sure  your  computer  is  set  to  use  a  dynamic  IP  address.  Refer  to  IV ‐ 1.  Configuring  your  IP  address  for  more  information.   5. Select  the  mode  for  yo ...

  • Edimax Technology BR-6228NC V2 - page 11

    7  and  Ethernet)  access  for  your  network  devices .  Range  Extender  The  device  connects  wirelessly  to  your  existing  network  and  repeats  the  wireless  signal.   Follow  the  appropriate  instructions  for  your  operating  mode:   ...

  • Edimax Technology BR-6228NC V2 - page 12

    8  II ‐ 1.  Wi ‐ Fi  Router  Mode   1.  Connect  the  blue  WAN  port  of  your  BR ‐ 6228nS  V2/nC  V2  to  the  LAN  port  of  your  modem  using  an  Ethernet  cable,  and  then  click  “Next”.     2.  Please  wait  a  m ...

  • Edimax Technology BR-6228NC V2 - page 13

    9  3.  Click  “Next”  to  continue  and  configure  the  device’s  wireless  network.     4.  Enter  a  name  and  password  for  your  wireless  network,  then  click  “Next”  to  continue.     ...

  • Edimax Technology BR-6228NC V2 - page 14

    10  5.  A  summary  of  your  configuration  will  be  displayed,  as  shown  below.  Check  that  all  of  the  details  are  correct  and  then  click  “Next”  to  proceed.     If  you  wish  to  backup  the  device’s  settings, ? ...

  • Edimax Technology BR-6228NC V2 - page 15

    11  6.  Please  wait  a  moment  until  the  device  is  ready.     7.  A  final  congratulations  screen  will  indicate  that  setup  is  complete.  Please  close  the  browser  window.     8. The  BR ‐ 6228nS  V2/nC  V2  is  workin ...

  • Edimax Technology BR-6228NC V2 - page 16

    12  II ‐ 2.  Access  Point  Mode   1.  Connect  the  yellow  LAN  port  of  your  BR ‐ 6228nS  V2/nC  V2  to  the  LAN  port  of  your  existing  router  using  an  Ethernet  cable,  then  click  “Next”.     2.  Select  “Obtain ? ...

  • Edimax Technology BR-6228NC V2 - page 17

    13  “Obtain  an  IP  address  automatically”  is  the  recommended  setting  for  most  users.  For  more  guidance  on  static  IP  addresses,  please  refer  to  IV ‐ 1.  Configuring  your  IP  address .   3.  Enter  a  name  and  password ...

  • Edimax Technology BR-6228NC V2 - page 18

    14  If  you  wish  to  backup  the  device’s  settings,  click  “Backup  this  configuration”  to  open  a  new  window  and  save  your  current  configuration  to  a  AP.txt  file.     5.  Please  wait  a  moment  until  the  BR ? ...

  • Edimax Technology BR-6228NC V2 - page 19

    15    7. The  BR ‐ 6228nS  V2/nC  V2  is  working  and  ready  for  use.  You  can  now  connect  to  the  device’s  new  SSID.  Please  refer  to  IV ‐ 2.  Connecting  to  a  Wi ‐ Fi  network  if  you  require  more  guidance.   ...

  • Edimax Technology BR-6228NC V2 - page 20

    16  II ‐ 3.  Range  Extender  Mode   1.  Please  ensure  your  BR ‐ 6228nS  V2/nC  V2  is  within  Wi ‐ Fi  range  of  your  existing  wireless  router.  Click  “Next”  to  continue.     2.  The  “Wireless  Site  Survey”  page  dis ...

  • Edimax Technology BR-6228NC V2 - page 21

    17    In  Range  Extender  mode,  the  BR ‐ 6228nS  V2/nC  V2’s  default  SSID  is  your  existing  router/access  point’s  SSID  +  _2EX.  For  example  if  your  router’s  SSID  is  “Your  SSI D”  then  the  BR ‐ 6228nS  V2/nC  V2? ...

  • Edimax Technology BR-6228NC V2 - page 22

    18     SSID  Enter  the  SSID  (network name)  of  your  existing,  hidden  network. Device  SSID  Enter  an  SSID  for  the  BR ‐ 6228nS  V2/nC  V2  or  leave  it  blank  to  use  a  default  which  consists  of  your  existing  router? ...

  • Edimax Technology BR-6228NC V2 - page 23

    19  If  the  BR ‐ 6228nS  V2/nC  V2  cannot  obtain  an  IP  address  (below)  from  your  existing  router/access  point  then  click  the  “Static  IP”  button  to  assign  an  IP  address  to  the  BR ‐ 6228nS  V2/nC  V2.  For  more  ...

  • Edimax Technology BR-6228NC V2 - page 24

    20  If  you  wish  to  backup  the  BR ‐ 6228nS  V2/nC  V2’s  settings,  click  “Backup  this  configuration”  to  open  a  new  window  and  save  your  current  configuration  to  a  "range  extender.txt"  file.     5.  Please ? ...

  • Edimax Technology BR-6228NC V2 - page 25

    21    7.  The  BR ‐ 6228nS  V2/nC  V2  is  working  and  ready  for  use.  You  can  now  connect  to  the  device’s  new  SSID.  Please  refer  to  IV ‐ 2.  Connecting  to  a  Wi ‐ Fi  network  if  you  require  more  guidance.  ? ...

  • Edimax Technology BR-6228NC V2 - page 26

    22  II ‐ 4.  WPS  Setup   If  your  wireless  device  supports  WPS  (Wi ‐ Fi  Protected  Setup)  then  you  can  use  this  method  to  connect  to  the  BR ‐ 6228nS  V2/nC  V2’ s  Wi ‐ Fi  network.    1. Press  the  WPS  button  on ? ...

  • Edimax Technology BR-6228NC V2 - page 27

    23  III. Browser  Based  Configuration  Interface   After  you  have  setup  the  BR ‐ 6228nS  V2/nC  V2  as  detailed  in  II.  Installation  or  the  included  Quick  Installation  Guide ,  you  can  use  the  browser  based  configuration  interface ...

  • Edimax Technology BR-6228NC V2 - page 28

    24    3.  You  will  arrive  at  the  “Status”  screen.  Use  the  menu  down  the  left  side  to  navigate.    ...

  • Edimax Technology BR-6228NC V2 - page 29

    25  III ‐ 2.  Save  Settings   1.  After  you  configure  any  settings,  click  the  “Save  Settings”  button  at  the  bottom  of  the  screen  to  save  your  changes.     The  device  needs  to  restart  in  order  to  bring  ...

  • Edimax Technology BR-6228NC V2 - page 30

    26  III ‐ 3.  Main  Menu   The  main  menu  displays  different  options  depending  on  your  device’s  operating  mode.                    Wi ‐ Fi  Router  Access  Point  Range  Extender  ...

  • Edimax Technology BR-6228NC V2 - page 31

    27  III ‐ 3 ‐ 1.  Status   The  “Status”  page  displays  basic  system  information  about  the  device,  arranged  into  four  categories:  System,  LAN,  Internet  &  2.4GHz  Wireless.   Screenshots  displayed  are  examples.The  information  sh ...

  • Edimax Technology BR-6228NC V2 - page 32

    28  III ‐ 3 ‐ 2.  Setup  Wizard   You  can  run  the  setup  wizard  again  to  reconfigure  the  basic  settings  of  the  device,  or  you  can  run  a  wizard  to  help  you  switch  the  device  to  a  different  operating  mode.  ...

  • Edimax Technology BR-6228NC V2 - page 33

    29    3.  Follow  the  on ‐ screen  wizard  to  setup  your  device  in  a  different  mode.  Refer  to  II.  Installation  Step  3  onwards  for  help  if  needed.  ...

  • Edimax Technology BR-6228NC V2 - page 34

    30  III ‐ 3 ‐ 3.  Internet   The  “Internet”  menu  provides  access  to  WAN  and  DDNS  settings.  Click  on  an  item  from  the  submenu  to  view  and/or  configure  the  settings.    III ‐ 3 ‐ 3 ‐ 1.  WAN  Setup   Select  a ? ...

  • Edimax Technology BR-6228NC V2 - page 35

    31   Host  Name  Enter  the  host  name  of  your  computer.  MAC  Address  For  some  applications,  you  may  need  to  designate  a  specific  MAC  address  for  the  router.  Please  enter  the  MAC  address  here.  If  you  are  conne ...

  • Edimax Technology BR-6228NC V2 - page 36

    32   Fixed  IP  Address  Input  the  IP address assigned by your  ISP  here.  Subnet  Mask  Input  the  subnet mask assigned by  your  ISP  here.  Default  Gateway  Address  Input  the  default gateway assigned  by  your  ISP  here.  Some  ISPs  may  call ? ...

  • Edimax Technology BR-6228NC V2 - page 37

    33  III ‐ 3 ‐ 3 ‐ 1 ‐ 3.  PPPoE   Select  “PPPoE”  if  your  ISP  is  providing  you  Internet  access  via  PPPoE  (Point ‐ to ‐ Point  Protocol  over  Ethernet).     User  Name  Enter  the user name assigned by your  ISP  here.  Password  ...

  • Edimax Technology BR-6228NC V2 - page 38

    34  TTL  Enable/Disable  time  to  live  (TTL)  function  which  limits  the  lifespan  of  network  data  to  improve  performance. Service  Name  Give  this Internet service a  name  (optional).  MTU  Enter  the  maximum  transmission  unit  (MTU)  value  ...

  • Edimax Technology BR-6228NC V2 - page 39

    35  III ‐ 3 ‐ 3 ‐ 1 ‐ 4.  PPTP   Select  “PPTP”  if  your  ISP  is  providing  you  Internet  access  via  PPTP  (Point ‐ to ‐ Point  Tunneling  Protocol).  Then  select  “Obtain  an  IP  address  automatically”  or  “Use  the  following ...

  • Edimax Technology BR-6228NC V2 - page 40

    36   Host  Name  Enter  the host name of your computer  here  If  required. MAC  Address  For  some  applications,  you  may  need  to  designate  a  specific  MAC  address  for  the  router.  Please  enter  the  MAC  address  here.  If  you  are  ...

  • Edimax Technology BR-6228NC V2 - page 41

    37  shutting  down  an  idle  connection.  Only  available  when  “Connect  on  Demand”  (above)  is  selected.  III ‐ 3 ‐ 3 ‐ 1 ‐ 5.  L2TP   Select  “L2TP”  if  your  ISP  is  providing  you  Internet  access  via  L2TP  (Layer  2  Tu ...

  • Edimax Technology BR-6228NC V2 - page 42

    38  automatically  enter  your  computer’s  MAC  address. Static  IP  Address  Input  the  IP address assigned by your  ISP  here. Subnet  Mask  Input  the  subnet mask assigned by  your  ISP  here. Default  Gateway  Address  Input  the  default gateway assigned  by  ...

  • Edimax Technology BR-6228NC V2 - page 43

    39  III ‐ 3 ‐ 3 ‐ 1 ‐ 6.  WISP   Select  “WISP”  if  you  use  a  wireless  internet  service  from  Internet  Service  Provider  (WISP).     WISP  Enable or disable the  WISP function.  ESSID  Enter  the  SSID  of  the  WISP  network,  or ...

  • Edimax Technology BR-6228NC V2 - page 44

    40  III ‐ 3 ‐ 3 ‐ 2.  DDNS   Dynamic  DNS  (DDNS)  is  a  service  which  provides  a  hostname ‐ to ‐ IP  service  for  dynamic  IP  users.  The  changing  nature  of  dynamic  IPs  means  that  it  can  be  difficult  to  access  a  ...

  • Edimax Technology BR-6228NC V2 - page 45

    41  CyberGate  http://cybergate.planex.co.jp/ddns/  NS2GO   http://www.ns2go.com/  NO ‐ IP    http://www.noip.com/    ...

  • Edimax Technology BR-6228NC V2 - page 46

    42  III ‐ 3 ‐ 4.  LAN   You  can  configure  your  Local  Area  Network  (LAN)  on  this  page.  You  can  enable  the  router  to  dynamically  allocate  IP  addresses  to  your  LAN  clients,  and  you  can  modify  the  IP  address  ...

  • Edimax Technology BR-6228NC V2 - page 47

    43     Start  IP  Enter  the  start  IP  address  for  the  DHCP  server’s  IP  address  leases. End  IP  Enter  the  end IP  address  for  the  DHCP  server’s  IP  address  leases. Domain  Name  Enter  a  domain  name  for  your  netw ...

  • Edimax Technology BR-6228NC V2 - page 48

    44   ...

  • Edimax Technology BR-6228NC V2 - page 49

    45  III ‐ 3 ‐ 5.  2.4GHz  Wireless   The  “2.4GHz  Wireless”  menu  allows  you  to  configure  SSID  and  security  settings  for  your  Wi ‐ Fi  network  along  with  a  guest  Wi ‐ Fi  network.  WPS,  access  control  and  scheduling  f ...

  • Edimax Technology BR-6228NC V2 - page 50

    46  characters. Broadcast  ESSID  Enable  or  disable  ESSID  broadcast.  When  enabled,  the  ESSID  will  be  visible  to  clients  as  an  available  Wi ‐ Fi  network.  When  disabled,  the  ESSID  will  not  be  visible  as  an  available  Wi ? ...

  • Edimax Technology BR-6228NC V2 - page 51

    47  III ‐ 3 ‐ 5 ‐ 1 ‐ 2.  WEP   WEP  (Wired  Equivalent  Privacy)  is  a  basic  encryption  type.  For  a  higher  level  of  security  consider  using  WPA  encryption.     Key  Length  Select  64 ‐ bit  or  128bit.  128 ‐ bit  is  ...

  • Edimax Technology BR-6228NC V2 - page 52

    48  III ‐ 3 ‐ 5 ‐ 1 ‐ 3.  WPA  Pre ‐ Shared  Key   WPA  pre ‐ shared  key  is  the  recommended  and  most  secure  encryption  type.     WPA  Unicast  Cipher  Suite  Select  from  WPA  (TKIP),  WPA2  (AES)  or  WPA2  Mixed.  WPA2  ( ...

  • Edimax Technology BR-6228NC V2 - page 53

    49  III ‐ 3 ‐ 5 ‐ 1 ‐ 4.  WPA  Radius   WPA  RADIUS  is  a  combination  of  WPA  encryption  and  RADIUS  user  authentication.  If  you  have  a  RADIUS  authentication  server,  you  can  authenticate  the  identity  of  every  wireless  cl ...

  • Edimax Technology BR-6228NC V2 - page 54

    50  III ‐ 3 ‐ 5 ‐ 2.  Guest   You  can  setup  an  additional  “Guest”  Wi ‐ Fi  network  so  guest  users  can  enjoy  Wi ‐ Fi  connectivity  without  accessing  your  primary  network.  The  “Guest”  screen  displays  settings  for  your ? ...

  • Edimax Technology BR-6228NC V2 - page 55

    51  Encryption  Please  refer  to  II I ‐ 3 ‐ 5 ‐ 1.  Basic:  Wireless  S ecurity for  details  about  security  settings.   WPA  RADIUS  encyrption  type  is  not  available  for  the  guest  network.   ...

  • Edimax Technology BR-6228NC V2 - page 56

    52  III ‐ 3 ‐ 5 ‐ 3.  WPS   Wi ‐ Fi  Protected  Setup  is  a  simple  way  to  establish  connections  between  WPS  compatible  devices.  WPS  can  be  activated  on  compatible  devices  by  pushing  a  WPS  button  on  the  device  or  f ...

  • Edimax Technology BR-6228NC V2 - page 57

    53  Configure  via  Push  Button  Click  “Start  PBC”  (Push ‐ Button  Configuration)  to  activate  WPS  on  the  access  point.  WPS  will  be  active  for  2  minutes. Configure  via  Client  PIN  Code  Enter  the  wireless  client’s  PIN  ...

  • Edimax Technology BR-6228NC V2 - page 58

    54   MAC  address  Select  a  PC  name from the  drop ‐ down  list  and  click  “>>”  to  add  enter  it  into  the  blank  field  to  the  right.   Click  “Refresh’  in  the  drop ‐ down  menu  to  refresh  the  list  of  a ...

  • Edimax Technology BR-6228NC V2 - page 59

    55  III ‐ 3 ‐ 5 ‐ 5.  Schedule   The  schedule  feature  allows  you  to  automate  the  wireless  radio  to  switch  on/off  at  specified  times.  Multiple  schedules  can  be  configured.  Check/uncheck  the  box  “Enable  Schedule  Settings”  ...

  • Edimax Technology BR-6228NC V2 - page 60

    56   Add  Add  the  schedule to  the  table  of  active  schedules. Clear  Clear  all  fields.  Active  schedules  will  be  displayed  in  the  table  as  shown  below.  Select  an  entry  using  the  “Select”  checkbox.     Delete  Sele ...

  • Edimax Technology BR-6228NC V2 - page 61

    57  III ‐ 3 ‐ 6.  Firewall   The  “Firewall”  menu  provides  access  to  URL  blocking,  access  control,  DMZ  and  DoS  functions  to  improve  the  security  of  your  wireless  network.         SPI  firewall  Enable  or  disab ...

  • Edimax Technology BR-6228NC V2 - page 62

    58   URL/Keyword  Enter  the  URL  or  keyword  to  be  blocked.  Add  Add  the  URL  or  keyword  to  the  blocked  table. Clear  Clear  all  fields.  Blocked  URLs/keywords  entries  will  be  listed  in  the  table  as  shown  below.  Sele ...

  • Edimax Technology BR-6228NC V2 - page 63

    59  III ‐ 3 ‐ 6 ‐ 2.  Access  Control   Access  Control  (MAC  filtering)  can  al so  be  configured  from  III ‐ 3 ‐ 5 ‐ 4.  Access  Control .   Access  Control  is  a  security  feature  that  can  help  to  prevent  unauthorized  users  from ...

  • Edimax Technology BR-6228NC V2 - page 64

    60  MAC  Filtering:   Enable  MAC  Filtering  Check  the  box  to  enable  MAC  filtering  and  select  whether  to  “Deny”  or  “Allow”  access  for  specified  MAC  address. Client  PC  MAC  Address  Enter  a MAC  address  of  computer  o ...

  • Edimax Technology BR-6228NC V2 - page 65

    61  IP  Filtering:   Enable  IP  Filtering Check  the  box  to  enable  IP  filtering  and  select  whether  to  “Deny”  or  “Allow”  access  for  specified  IP  address. Add  PC  Opens  a  new  window  to  add  a  new  IP  to  the ? ...

  • Edimax Technology BR-6228NC V2 - page 66

    62   Client  PC  Description  Enter  a  description  for  reference/identification  of  up  to  16  alphanumeric  characters.  Client  PC  IP  address  Enter  a starting  IP  address  in  the  left  field  and  the  end  IP  address  in  the  ri ...

  • Edimax Technology BR-6228NC V2 - page 67

    63  III ‐ 3 ‐ 6 ‐ 3.  DMZ   A  Demilitarized  Zone  (DMZ)  is  an  isolated  area  in  your  local  network  wh ere  private  IP  addresses  are  mapped  to  specified  internet  IP  addresses,  allowing  unrestricted  access  to  the  private  ...

  • Edimax Technology BR-6228NC V2 - page 68

    64   DMZ  entries  will  be  displayed  in  the  table  below:     Delete  Selected/  Delete  All  Delete selected  or  all  entries  from  the  table.   III ‐ 3 ‐ 6 ‐ 4.  DoS   Denial ‐ of ‐ Service  (DoS)  is  a  common  form  of  ...

  • Edimax Technology BR-6228NC V2 - page 69

    65   Ping  of  Death  Specify  the  frequency  of  ping  of  death  packets  which  will  trigger  the  router’s  DoS  protection  function. Discard  Ping  from  WAN  Check  this  box  and  the  router  will  not  answer  ping  requests  from ...

  • Edimax Technology BR-6228NC V2 - page 70

    66  III ‐ 3 ‐ 7.  QoS   Quality  of  Service  (QoS)  is  a  feature  to  manage  Internet  bandwidth  efficiently.  Some  applications  require  more  bandwidth  than  others  to  function  properly,  and  QoS  allows  you  to  ensure  that  su ...

  • Edimax Technology BR-6228NC V2 - page 71

    67    Rule  Name  Enter  a  name  for  the  QoS  rule  for  reference/identification. Bandwidth  Set  the  bandwidth  limits  for  the  QoS  rule:    (1)  (2)  (3)   1. Select  “Downl ...

  • Edimax Technology BR-6228NC V2 - page 72

    68  IP  address. Local  Port  Range  Enter  the  port  range  to  activate  the  QoS  rule. Enter  a  single  port  number  e.g.  110  or  a  range  of  port  numbers  e.g.  110 ‐ 120  Remote  IP  Address  Enter  the  remote  IP  address  r ...

  • Edimax Technology BR-6228NC V2 - page 73

    69   Edit  Edit  a  selected  rule. Delete  Selected/  Delete  All  Delete  selected  or  all  entries  from  the  table. Move  Up/Down  Move  selected  rule  up or  down  the  list.   ...

  • Edimax Technology BR-6228NC V2 - page 74

    70  III ‐ 3 ‐ 8.  Advanced   Advanced  features  of  the  BR ‐ 6228nS  V2/nC  V2  can  be  configured  from  the  “Advanced”  menu.          III ‐ 3 ‐ 8 ‐ 1.  Static  Routing   Static  routing  is  a  method  of  configuring ? ...

  • Edimax Technology BR-6228NC V2 - page 75

    71   Enable  Static  R outing  Check/uncheck  the  box  to  enable/disable  static  routing. Destination  LAN  IP  Enter  the  destination  network’s  IP  address. Subnet  Mask  Enter  the  subnet  mask  of  the  destination  network. Default  Gateway  Enter ...

  • Edimax Technology BR-6228NC V2 - page 76

    72   Private  IP  Enter  the  IP  address  of  the  computer  on  the  local  network. Computer  Name  Windows  computers  on  the  local  network  will  be  listed  here  –  select  a  computer  from  the  list  and  click  <<  to ? ...

  • Edimax Technology BR-6228NC V2 - page 77

    73  III ‐ 3 ‐ 8 ‐ 3.  Virtual  Server   This  function  allows  you  to  set  up  an  internet  service  on  a  local  comp uter,  without  exposing  the  local  computer  to  the  internet.  You  can  also  build  various  sets  of  port  ...

  • Edimax Technology BR-6228NC V2 - page 78

    74  III ‐ 3 ‐ 8 ‐ 4.  2.4GHz  Wireless   These  settings  are  for  experienced  users  only.  Please  do  not  change  an y  of  the  values  on  this  page  unless  you  are  already  familiar  with  these  functions.     Fragment  Thres ...

  • Edimax Technology BR-6228NC V2 - page 79

    75  CTS  Protect  Enabling  this  setting  will  reduce  the  chance  of  radio  signal  collisions  between  802.11b  and  802.11g  wireless  access  points.  It’s  recommended  to  set  this  option  to  “Auto”. Tx  Power  Set  the  power  out ...

  • Edimax Technology BR-6228NC V2 - page 80

    76  III ‐ 3 ‐ 8 ‐ 6.  IGMP   IGMP  is  a  communications  protocol  used  to  establish  multicast  group  memberships.  It  allows  for  a  more  efficient  use  of  resources  and  better  performance  for  applications  such  as  IPTV  video  ...

  • Edimax Technology BR-6228NC V2 - page 81

    77  III ‐ 3 ‐ 9.  Administration   Various  administrative  functions  can  be  accessed  from  the  “Administration”  menu.             III ‐ 3 ‐ 9 ‐ 1.  Time  Zone     Set  Time  Zone  Select  the  time  zone  of  you ...

  • Edimax Technology BR-6228NC V2 - page 82

    78  III ‐ 3 ‐ 9 ‐ 2.  Password   You  can  change  the  password  used  to  login  to  the  browser ‐ based  configuration  interface  here.  It  is  advised  to  do  so  for  security  purposes.   Please  make  a  note  of  the  new  pa ...

  • Edimax Technology BR-6228NC V2 - page 83

    79  III ‐ 3 ‐ 9 ‐ 3.  Remote  Access   Check  “ Enabled ”  to  enable  the  remote  access  feature  and  then  enter  the  appropriate  values.     Host  IP  Address  Specify  the  IP  address  which  is  allowed  remote  access.  Port ? ...

  • Edimax Technology BR-6228NC V2 - page 84

    80  III ‐ 3 ‐ 9 ‐ 4.  Backup/Restore     Backup  Settin gs  Click  “Save” to  save  the  current  settings  on  your  computer  as  config.bin  file. Restore  Settings  Click  “Browse” to  find  a  previously  saved  config.bin  file  and  then ? ...

  • Edimax Technology BR-6228NC V2 - page 85

    81  III ‐ 3 ‐ 9 ‐ 6.  Restart   In  the  event  that  the  router  malfunctions  or  is  not  responding,  then  it  is  recommended  that  you  restart  the  device.     III ‐ 3 ‐ 9 ‐ 7.  Logs   You  can  view  the  system  log  ...

  • Edimax Technology BR-6228NC V2 - page 86

    82   Save  Click  “Save” to  save  the  log on  your  computer  as  .txt  file. Clear  Click  “Clear”  to  clear/erase  the  existing  log.  Refresh  Click  “Refresh”  to  refresh  the  log and  update  any  activity.   III ‐ 3 ‐ 9 ‐ 8. ? ...

  • Edimax Technology BR-6228NC V2 - page 87

    83  IV. Appendix   IV ‐ 1.  Configuring  your  IP  address   For  first  time  access  to  the  URL  http://Edima x.Setup  please  ensure  your  computer  is  set  to  use  a  dynamic  IP  address.  This  means  your  computer  can  obtain  an ...

  • Edimax Technology BR-6228NC V2 - page 88

    84  IV ‐ 1 ‐ 1.  How  to  check  that  your  computer  uses  a  dynamic  IP  address  Please  follow  the  instructions  appropriate  for  your  operating  system.   IV ‐ 1 ‐ 1 ‐ 1.  Windows  XP   1.  Click  the  “Start”  button  (it  sh ...

  • Edimax Technology BR-6228NC V2 - page 89

    85    ...

  • Edimax Technology BR-6228NC V2 - page 90

    86  IV ‐ 1 ‐ 1 ‐ 2.  Windows  Vista   1.  Click  the  “Start”  button  (it  should  be  located  in  the  lower ‐ left  corner  of  your  computer),  then  click  “Control  Panel”.  Click  “View  Network  Status  and  Tasks”,  then  c ...

  • Edimax Technology BR-6228NC V2 - page 91

    87   ...

  • Edimax Technology BR-6228NC V2 - page 92

    88  IV ‐ 1 ‐ 1 ‐ 3.  Windows  7   1.  Click  the  “Start”  button  (it  should  be  located  in  the  lower ‐ left  corner  of  your  computer),  then  click  “Control  Panel”.     2.  Under  “Network  and  Internet”  click  “ ...

  • Edimax Technology BR-6228NC V2 - page 93

    89    4.  Click  “Properties”.     5.  Select  “Internet  Protocol  Version  4  (TCP/IPv4)  and  then  click  “Properties”.   ...

  • Edimax Technology BR-6228NC V2 - page 94

    90    6.  Select  “Obtain  an  IP  address  automatically”  and  “Obtain  DNS  server  address  automatically”  should  be  selected.     ...

  • Edimax Technology BR-6228NC V2 - page 95

    91  IV ‐ 1 ‐ 1 ‐ 4.  Windows  8   1.  From  the  Windows  8  Start  screen,  you  need  to  switch  to  desktop  mode.  Move  your  curser  to  the  bottom  left  of  the  screen  an d  click.     2.  In  desktop  mode,  click  ...

  • Edimax Technology BR-6228NC V2 - page 96

    92    4.  In  the  window  that  opens,  select  “Change  adapter  settings”  from  the  left  side.     5.  Choose  your  connection  and  right  click,  then  select  “Properties”.  ...

  • Edimax Technology BR-6228NC V2 - page 97

    93    6.  Select  “Internet  Protocol  Version  4  (TCP/IPv4)  and  then  click  “Properties”.     7.  Select  “Obtain  an  IP  address  automatically”  and  “Obtain  DNS  server  address  automatically”  should  be  selected.  ...

  • Edimax Technology BR-6228NC V2 - page 98

    94    ...

  • Edimax Technology BR-6228NC V2 - page 99

    95  IV ‐ 1 ‐ 1 ‐ 5.  Mac  OS   1.  Have  your  Macintosh  computer  operate  as  usual,  and  click  on  “System  Preferences”.    2.  In  System  Preferences,  click  on  “Network”.     3.  Click  on  “Wi ‐ Fi”  in  the  ...

  • Edimax Technology BR-6228NC V2 - page 100

    96    ...

  • Edimax Technology BR-6228NC V2 - page 101

    97  IV ‐ 1 ‐ 2.  How  to  modify  the  IP  address  of  your  computer   Please  follow  the  instructions  appropriate  for  your  operating  system.  In  the  following  examples  we  use  the  IP  address  192.168.2.10  though  you  can  use ...

  • Edimax Technology BR-6228NC V2 - page 102

    98  Your  existing  static  IP  address  will  be  displayed  in  the  “IP  address”  field  before  you  replace  it.  Please  make  a  note  of  this  IP  address,  subnet  mask,  default  gateway  and  DNS  server  addresses.   IP  add ...

  • Edimax Technology BR-6228NC V2 - page 103

    99  IV ‐ 1 ‐ 2 ‐ 2.  Windows  Vista   1.  Click  the  “Start”  button  (it  should  be  located  in  the  lower ‐ left  corner  of  your  computer),  then  click  “Control  Panel”.  Click  “View  Network  Status  and  Tasks”,  then  c ...

  • Edimax Technology BR-6228NC V2 - page 104

    100  IV ‐ 1 ‐ 2 ‐ 3.  Windows  7   1.  Click  the  “Start”  button  (it  should  be  located  in  the  lower ‐ left  corner  of  your  computer),  then  click  “Control  Panel”.     2.  Under  “Network  and  Internet”  click  ? ...

  • Edimax Technology BR-6228NC V2 - page 105

    101    4.  Click  “Properties”.     ...

  • Edimax Technology BR-6228NC V2 - page 106

    102  5. Select  “Internet  Protocol  Version  4  (TCP/IPv4)  and  then  click  “Properties”.     6.  Select  “Use  the  following  IP  address”  and  “Use  the  following  DNS  server  addresses”,  then  input  the  following  values:  ? ...

  • Edimax Technology BR-6228NC V2 - page 107

    103  IV ‐ 1 ‐ 2 ‐ 4.  Windows  8   1.  From  the  Windows  8  Start  screen,  you  need  to  switch  to  desktop  mode.  Move  your  curser  to  the  bottom  left  of  the  screen  an d  click.     2.  In  desktop  mode,  click ? ...

  • Edimax Technology BR-6228NC V2 - page 108

    104  3.  Right  click  “Network”  and  then  select  “Properties”.     4.  In  the  window  that  opens,  select  “Change  adapter  settings”  from  the  left  side.    ...

  • Edimax Technology BR-6228NC V2 - page 109

    105  5.  Choose  your  connection  and  right  click,  then  select  “Properties”.     6.  Select  “Internet  Protocol  Version  4  (TCP/IPv4)  and  then  click  “Properties”.     ...

  • Edimax Technology BR-6228NC V2 - page 110

    106  7.  Select  “Use  the  following  IP  address”  and  “Use  the  following  DNS  server  addresses”,  then  input  the  following  values:   Your  existing  static  IP  address  will  be  displayed  in  the  “IP  address”  field  be ...

  • Edimax Technology BR-6228NC V2 - page 111

    107  IV ‐ 1 ‐ 2 ‐ 5.  Mac   1.  Have  your  Macintosh  computer  operate  as  usual,  and  click  on  “System  Preferences”    2.  In  System  Preferences,  click  on  “Network”.     3.  Click  on  “Wi ‐ Fi”  in  the  left ? ...

  • Edimax Technology BR-6228NC V2 - page 112

    108    Your  existing  static  IP  address  will  be  displayed  in  the  “IP  address”  field  before  you  replace  it.  Please  make  a  note  of  this  IP  address,  subnet  mask,  default  gateway  and  DNS  server  addresses.   5 ...

  • Edimax Technology BR-6228NC V2 - page 113

    109  6.  Click  “Apply”  to  save  the  changes.     ...

  • Edimax Technology BR-6228NC V2 - page 114

    110  IV ‐ 1 ‐ 3.  How  to  Find  Your  Network  Security  Key   To  find  your  network  security  key,  please  follow  the  instructions  appropriate  for  your  operating  system.   If  you  are  using  Windows  XP  or  earlier,  please  ...

  • Edimax Technology BR-6228NC V2 - page 115

    111    4.  You  should  see  the  profile  of  your  Wi ‐ Fi  network  in  the  list.  Right  click  on  your  Wi ‐ Fi  network  and  then  click  on  “Properties”.     5. Click  on  the  “Security”  tab,  and  then  check  ...

  • Edimax Technology BR-6228NC V2 - page 116

    112  IV ‐ 1 ‐ 3 ‐ 2.  Mac   1.  Open  a  new  Finder  window,  and  select  “Applications”  from  the  menu  on  the  left  side.  Open  the  folder  labeled  “Utilities”  and  then  open  the  application  “Keychain  Access”.    ...

  • Edimax Technology BR-6228NC V2 - page 117

    113    3.  Double  click  the  SSID  of  your  network  and  you  will  see  the  following  window.     4.  Check  the  box  labeled  “Show  password”  and  you  will  be  asked  to  enter  your  administrative  password,  which ? ...

  • Edimax Technology BR-6228NC V2 - page 118

    114     Your  network  security  password  will  now  be  displayed  in  the  field  next  to  the  box  labeled  “Show  password”.  In  the  example  below,  the  network  security  password  is  “edimax1234”.  Please  make  a  note  ...

  • Edimax Technology BR-6228NC V2 - page 119

    115  IV ‐ 1 ‐ 4.  How  to  Find  Your  Router’s  IP  Address   To  find  your  router’s  IP  address,  please  follow  the  instructions  appropriate  for  your  operating  system.   IV ‐ 1 ‐ 4 ‐ 1.  Windows  XP,  Vista  &  7   1. ? ...

  • Edimax Technology BR-6228NC V2 - page 120

    116    3.  Your  router’s  IP  address  will  be  displayed  next  to  “Default  Gateway”.     ...

  • Edimax Technology BR-6228NC V2 - page 121

    117  IV ‐ 1 ‐ 4 ‐ 2.  Windows  8   1.  From  the  Windows  8  Start  screen,  move  your  curser  to  the  top  right  corner  of  the  screen  to  display  the  Charms  bar.     2.  Click  “Search”  and  enter  “cmd”  into ? ...

  • Edimax Technology BR-6228NC V2 - page 122

    118    3.  A  new  window  will  open,  type  “ipconfig”  and  press  Enter.     ...

  • Edimax Technology BR-6228NC V2 - page 123

    119  4. Your  router’s  IP  address  will  be  displayed  next  to  “Default  Gateway”.     ...

  • Edimax Technology BR-6228NC V2 - page 124

    120  IV ‐ 1 ‐ 4 ‐ 3.  Mac   1.  Launch  “System  Preferences”  and  click  on  “Network”.   2.  If  you  are  using  an  Ethernet  cable  to  connect  to  your  network,  your  router’s  IP  address  will  be  displayed  next  to ? ...

  • Edimax Technology BR-6228NC V2 - page 125

    121    4.  Click  the  “TCP/IP”  tab  and  your  router’s  IP  address  will  be  displayed  next  to  “Router”.     ...

  • Edimax Technology BR-6228NC V2 - page 126

    122  IV ‐ 2.  Connecting  to  a  Wi ‐ Fi  network   For  help  connecting  to  your  device’s  Edimax.Setup  SSID  for  initial  setup,  or  to  connect  to  your  device’s  new  Wi ‐ Fi  network  (SSID)  after  setup  is  complete,  follow ...

  • Edimax Technology BR-6228NC V2 - page 127

    123  3.  After  correctly  entering  your  password,  you  will  be  successfully  connected  to  the  BR ‐ 6228nS  V2/nC  V2’s  wireless  network.     ...

  • Edimax Technology BR-6228NC V2 - page 128

    124  IV ‐ 3.  Troubleshooting   If  you  are  experiencing  problems  with  your  BR ‐ 6228nS  V2/nC  V2,  please  check  below  before  contacting  your  dealer  of  purchase  for  help.   If  you  are  experiencing  problems  immediately  after  ...

  • Edimax Technology BR-6228NC V2 - page 129

    125  2. I  can’t  access  the  Internet.  a. Ensure  that  all  cables  are  connected  properly.  Try  a  different  Ethernet  cable.  b. Switch  your  BR ‐ 6228nS  V2/nC  V2  and  network  device  off  and  back  on  again.  Check  the  LED  ...

  • Edimax Technology BR-6228NC V2 - page 130

    126   Router  Login  Enter  this  URL  in  a  web  browser  to  run  iQ  Setup  or  configure  advanced  settings.  You  must  be  connected  to  the  device  by  Wi ‐ Fi  or  Ethernet  cable.  Username/Password  This  is  the  default  use ...

  • Edimax Technology BR-6228NC V2 - page 131

    127  7. Do  the  WAN  and  LAN  ports  work  the  same  when  the  device  is  in  different  modes?  No,  the  WAN  and  LAN  ports  have  slightly  different  functions  depending  on  the  operating  mode  of  the  device.   a. In  Wi ? ...

  • Edimax Technology BR-6228NC V2 - page 132

    128  IV ‐ 4.  Glossary   Default  Gateway  (Wireless  bridge):  Every  non ‐ access  point  IP  device  needs  to  configure  a  default  gateway’s  IP  address.  When  the  device  sends  out  an  IP  packet,  if  the  destination  is  not  ...

  • Edimax Technology BR-6228NC V2 - page 133

    129  A  network  mask  is  also  a  32 ‐ bit  binary  pattern,  and  consists  of  consecutive  leading  1’s  followed  by  consecutive  trailing  0’s,  such  as  11111111.11111111.11111111.00000000.  Therefore  sometimes  a  network  mask  can  also  ...

  • Edimax Technology BR-6228NC V2 - page 134

    130  Application  Protocol  Port  Number Telnet  TCP  23  FTP  TCP  21  SMTP  TCP  25  POP3  TCP  110  H.323  TCP  1720  SNMP  UCP  161  SNMP  Trap  UDP  162  HTTP  TCP  80  PPTP  TCP  1723  PC  Anywhere  TCP  5631  PC  Anywhere  UDP ? ...

  • Edimax Technology BR-6228NC V2 - page 135

    131    COPYRIGHT   Copyright  ©  Edimax  Technology  Co.,  Ltd.  all  rights  reserved.  No  part  of  this  publication  may  be  reproduced,  transmitted,  transcribed,  stored  in  a  retrieval  system,  or  translated  into  any  language  or ...

  • Edimax Technology BR-6228NC V2 - page 136

    132  Federal  Communication  Commission  Interference  Statemen t   This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital  device,  pursuant  to  Part  15  of  FCC  Rules.  These  limits  are  d ...

  • Edimax Technology BR-6228NC V2 - page 137

    133  EU  Declaration  of  Conformity   English:  This  equipment  is  in  compliance  with  the  essential  requirements  and  other  relevant  provisions  of  Directive  1999/5/EC,  2009/125/EC.  Français:  Cet  équipement  est  conforme  aux  exigen ces ? ...

  • Edimax Technology BR-6228NC V2 - page 138

    134      Declaration  of  Conformity   We,  Edimax  Technology  Co.,  Ltd.,  declare  under  our  sole  responsibility,  that  the  equipment  described  below  complies  with  the  requirements  of  the  European  R&TTE  directives.   Equipmen ...

  • Edimax Technology BR-6228NC V2 - page 139

    135    ...

Manufacturer Edimax Technology Category Network Router

Documents that we receive from a manufacturer of a Edimax Technology BR-6228NC V2 can be divided into several groups. They are, among others:
- Edimax Technology technical drawings
- BR-6228NC V2 manuals
- Edimax Technology product data sheets
- information booklets
- or energy labels Edimax Technology BR-6228NC V2
All of them are important, but the most important information from the point of view of use of the device are in the user manual Edimax Technology BR-6228NC V2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Edimax Technology BR-6228NC V2, service manual, brief instructions and user manuals Edimax Technology BR-6228NC V2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Edimax Technology BR-6228NC V2.

Similar manuals

A complete manual for the device Edimax Technology BR-6228NC V2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Edimax Technology BR-6228NC V2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Edimax Technology BR-6228NC V2.

A complete Edimax Technology manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Edimax Technology BR-6228NC V2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Edimax Technology BR-6228NC V2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Edimax Technology BR-6228NC V2, that we can find in the current document
3. Tips how to use the basic functions of the device Edimax Technology BR-6228NC V2 - which should help us in our first steps of using Edimax Technology BR-6228NC V2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Edimax Technology BR-6228NC V2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Edimax Technology BR-6228NC V2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Edimax Technology BR-6228NC V2?

Use the form below

If you did not solve your problem by using a manual Edimax Technology BR-6228NC V2, ask a question using the form below. If a user had a similar problem with Edimax Technology BR-6228NC V2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)